My office will connect to other wireless networks but not my own.

Similar Questions

• Aspire laptop connects to a wireless network, but not another

  First of all, I need to let you know that my home network consists of a Motorola router/modem from my ISP. I have the wireless off, then I use a cat5 ethernet cable to connect a Belkin wireless router, so that I can use the two USB ports on the back for a network storage device to make regular backups on all the pc in the House, and my printer not wireless, so we can print of anyroom home instead of taking the computer back to where the printer is. So about three days ago, I got my Aspire 5734Z-4386 laptop, and I don't have a wireless connection. So I checked my phone, and he always had a relationship with the Belkin. I took ten minutes to troubleshoot the Atheros AR5B93 wireless card. Could not understand why I didn't have a connection, it was great to work for about 12 hours before.

  If for some reason, I used another pc and connected on the Motorola and wireless turned on and immediately the Aspire showed a connection available, I clicked it and it says "connecting" for a few seconds and showed 'internet connection '. I spent about 5 minutes to surf the internet and then disconnected from the Motorola and reconnected to the Belkin, it says "connecting" for about a minute, then came to the yellow triangle, no internet. Back and clikced Motorola, once again the internet connection, but not on the Belkin. So I'm the other pc and checked the Web for the Belkin page to ensure that the Aspire had not been blacklisted in some way, there is nothing here to explain why I can't connect. So I spent three days, the adapter of the uninstall and re - install, I used the Motorola to download the latest driver for the adapter.

  When the Aspire is the Belkin network with the rest of the other pc, I have no problem, move files from and to the Aspire. I can use the Aspire to connect to one of the other pc and right click on a file and copy them to the Aspire and watch the file appear on the Aspire, take the Aspire and copy a file to another pc or use another pc to access the Aspire. But I can't get internet connection, unless I'm on the network from Motorola. Now, I had the wireless on the Motorola off so all attached devices would be on the same network, then we can share files, and other connected activities.

  I will admit that I am totally confused, it's not logical at all. I mean if someone else told me that their computer did this, I would have told them "it's impossible". Engineering wise, wise technology it not is not possible for an adapter do what made mine. But he does. Can someone please help me understand what is happening and how to fix it? I don't often admit defeat, but this time I've been beaten almost to death.

  Have you tried to reboot the router?

• How can IM connected to the wireless network, but not to the internet, I fix?

  my laptop can no longer connect to the internet, but for the wireless network I can view other computers on the network, but can't go on the internet it says unidentified network.
  I took all the troubleshooting steps to resolve this problem without success.
  all ideas

  Scott,

  Are you the same Scott, I tried to help the last month? If this is you, I left a couple more views. In one of them, I explained that exactly the same problem you encounter happened on my son's computer. I just disabled the router, waited for about ten seconds and he turned his back and that's what it took. I used actually utility of Windows troubleshooting and he advised me to do.

• Unable to connect to other wireless networks

  RE: Unable to connect to other wireless networks

  • My computer is a HP Pavilion dv7 1232nr Entertainment Center
  • My OS is Windows Vista 64 bit
  • I have installed many things over the past year, but know that at some point, I was able to get on free Wi - Fi in hotels

  I am able to connect to my network, but when I try to connect to others, I'm unable to do. I have their password and my computer SHOWS I have a connection, but actually I'm not. When I try to connect to the Internet, the server is not found. I called the support/supplier for the last network owner and he told me that even if I "thought" I was online, I really wasn't. He said that it is probably a router configuration for that person that does not correspond to my computer. As I was just visiting, of course I didn't mess with their router. This happened to me twice, with once the provider is the same as mine, but the only way I could get connected with a hard link.

  So far, the only thing I did is to see if I could connect to free wireless (municipal library) and was unsuccessful. I think the problem is with my settings, but am not sure. I have to be careful to change anything because I can't afford to lose my connection at home because my job depends on it.

  Any suggestions?

  Thanks for any advice you might be able to share.

  Hi, Pat:

  I am very confident that if you download and install the driver from the link below, your problem will be solved.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 321957 & prodSeriesId = 3688868 & swItem = ob-99392-1 & mode = 3

  Paul

• HP LaserJet 200 colorMFP M276nw connects to my wireless network, but will not recognize the printer

  I am trying to set up my wireless printer, and the printer says its is connected to my wireless network, but I can't get my computer to print wireless if I disconnect my regular network and attach the direct wireless network name, which is different and stops my internet to work. How can I get my computer to recognize the printer on my regular wireless network?

  Hi @lelg,

  I understand that you want to configure the printer on the wireless network. I can help you with this.

  Uninstall the printer software.

  Uninstalling the printer software.

  Restore the default settings of the printer.

  Go to Configuration, restore the default values.

  Cycle power to the router and the computer.

  Run the installer on the printer wireless.

  Go to the configuration, Setup, menu wireless network, Wireless Setup Wizard.

  Print a configuration page to get the IP address of the printer.

  Print a Configuration report.

  Select the method.

  If you have a valid IP address for the printer, then try and access the Web built-in to the printer server. Type the IP address in the address bar of your web browser. (Internet Explorer)

  If it loads the page from the network printer then the printer is on the network.

  Download, save, and then run the installation of the software. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Select your operating system, click Next and click on the software to download and install.

  Test the printer.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• problem connecting to the wireless network, but it worked yesterday.

  Yesterday, I was able to connect to my home wireless network, but not today. I also have a laptop and it connects to my wireless network, there must be something with the RT of Surface.

  Home Wireless works, why can't connect?

  Your post is off-topic in the forum Feedback, I moved it on the forum of "Web and Networking" Windows RT.

• I can connect to the local network, but not to the internet

  Why in an internet connection, I can connect to the Local network, but not to the Internet.
  I have valid IP address and configuration is good.

  I recommend you read some threads here in the forum about similar issues.
  If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
  Using the WiFi network, you must check if the common WLan parameters are favourable;
  Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.

  Good bye

• my printer and computer are both connected to my wireless network, but I can't print documents

  I have a HP Photosmart 6180 and am using Windows Vista.  Both the printer and the computer indicate that they are connected to my wireless network and my computer shows my printer on the network.  When I try to print a document from my computer, nothing prints and printing on my computer says a mistake of the printer.  The printer itself works fine and HP diagnostics indicate that everything is ok.  Any suggestions?

  OK, go to start > Control Panel > printers and delete all instances of the printer.

  Next:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• My PC is connected to the wireless network, but it is impossible to open any internet page. I went through the diagnosis of Internet Explorer, see below.

  Diagnosis of last run time: 28/01/12 10:16:32 Gateway diagnosis

  Entry door

  Info the following proxy configuration is used by IE: automatically detect settings: enabled Automatic Configuration Script: Proxy Server: Proxy bypass list:

  info could not get the proxy settings via the Proxy Automatic Configuration mechanism

  Info this computer has the following (s) default gateway: 0.0.0.0

  warn that there is no default gateway entry

  repair automatic action: reset the network connection

  action to disable the network card

  activation of the card network action

  successfully activated information network adapter

  Info this computer has the following (s) default gateway: 0.0.0.0

  warn that there is no default gateway entry

  user redirection of information in support of the appeal

  IP layer diagnostic

  Corrupted IP routing table

  prevent the default route is missing or not valid

  Invalid entries in the ARP cache

  action cache ARP has been emptied

  Diagnosis of IP Configuration

  Invalid IP address

  detected info valid IP address: 192.168.0.1

  Wireless diagnosis

  Wireless - Service disabled

  Wireless - user SSID

  required user input action: specify the name of the network or the SSID

  Wireless - first installation

  Info the name of the wireless network (SSID) to which the user wants to connect is IrinaLaptop-router.

  Wireless - Radio

  detected info valid IP address: 192.168.0.1

  Wireless - off limits

  Wireless - hardware problem

  Wireless - Novice user

  Wireless - network Ad - hoc

  Wireless - less preferred

  Wireless - 802. 1 active x

  Wireless - Configuration mismatch

  Wireless - low SNR

  WinSock diagnostic

  WinSock status

  info all base service provider entries are present in the Winsock Catalog.

  channels of information the Winsock Service provider are valid.

  Info entry provider MSAFD Tcpip [TCP/IP] passed the loopback communication test.

  Info entry provider MSAFD Tcpip [UDP/IP] passed the loopback communication test.

  Info entry RSVP UDP Service Provider provider passed the loopback communication test.

  Info entry RSVP TCP Service Provider provider passed the loopback communication test.

  Info connectivity is valid for all Winsock service providers.

  Diagnosis of network adapter

  Network location detection

  Info to help home Internet connection

  Identification of network adapter

  Info network connection: name = connection to the LAN, device = Broadcom 440 x 10/100 Integrated Controller, MediaType = LAN, type = LAN

  Info network connection: name = wireless network connection, Device = Intel (R) PRO/Wireless 3945ABG Network Connection, MediaType = LAN, type = Wireless

  Info network connection: name = 1394 connection, device = 1394 Net Adapter, MediaType = LAN, type = 1394

  Info network connection: name = connection high speed, device = Miniport WAN (PPPOE), MediaType = PPPOE, type = NONE

  Info network connection: name = blank, peripheral = Miniport WAN (PPPOE), MediaType = PPPOE, type = NONE

  Info both Ethernet connections and wireless available, ask the user for selection

  required user input action: select network connection

  Info Wireless connection selected

  State of the network adapter

  Info network connection status: connected

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity

  warn HTTP: error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

  warn HTTP: error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved

  WARN HTTPS: error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

  WARN HTTPS: error 12007 connecting to www.passport.net: the server name or address cannot be resolved

  WARN FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

  WARN FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

  error could not make an HTTP connection.

  error could not make an HTTPS connection.

  error could not make an FTP connection.

  I did not want to do this (restore point). However, I found a solution. It comes: http://forums.techguy.org/networking/1029348-network-connection-status-media-disconnected.html

  Where there are two crucial steps (do not know if the two were needed) RUN command (1) netsh int ip reset reset.log and (2) netsh winsock reset catalog
  
  
  After a restart, hey presto my wireless connection was repaired. This seems useful, but not essential (shows wireless performance but not the solution): http://wpc.475a.edgecastcdn.net/0047...etup.1.2.0.exe which is run Xirrus Wi-Fi Inspector 
  Thanks for your time!
  Good bye

• B110A connects to the wireless network but no PC connection

  Hi Forum,

  I just bought a new HP Photosmart B110A printer range. I got set up with my Belkin wireless router. It is successfully connected. I could set up printing webservice as well. The printer is offline and I could also print a document by sending an email to the email address for the printer configuration. This means that the printer is connected to the wireless network and the internet.

  However, I can not connect to this printer from my PC connected to the same wireless netwrok. When I open the HP Solution Center, it displays the message "disconnected wireless.

  When I connect the printer via USB cable, I am able to connect to the PC and impressions as well fire.

  Can anyone help please?

  Kind regards

  Amol

  Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

• Can not get the new laptop to connect to my wireless network but connects to others

  I have just bought a new laptop Dell Inspiron 1545 to Dell.com and have tried to set up the wireless internet for the past hours. The laptop running Windows Vista Home Basic Edition, & my wireless router is an Apple Airport Extreme Base Station (about 4-5 years). Below is a list of problems / advice I've come across so far:

  (1) when trying to connect to a network, my network don't appears in the list of local networks sporadically even if she lost the signal strength of any nearby wireless signal (I must refresh the list to make it appear sometimes)
  (2) when my network is displayed in the list, it is described as a network that is not secure; There are 2 others that come and go in the list that are also not guaranteed, but I was able to connect through one of them.
  (3) when I try to connect via my network it either says unable to connect immediately or poster progress bar, then after a minute or two, says that it cannot connect.
  -to diagnose the problem, I can exclude is not not in the range of my camera as I tried to connect when I'm 2 feet more far
  -It also says view wireless connections again and try again, but this brings me to the same screen
  -L' diagnostics screen mentions that "the network is"hidden"and is either not in range of this computer or wireless settings on this computer do not match the settings of the network." (is there a setting I'm familiar with that?)
  (4) I checked device drivers and all said that they are working correctly
  (5) I can connect to the internet via a direct connection to the router via a cable ethernet not wireless

  In my view, that it is all the information I can provide about this problem. If you need more information, such as the specifications of the system, let me know where to find them and I will re-post. Thanks in advance for any help provided.

  -Jeremy

  Well, it looks like the old router was the problem. You have a new N Wireless for about $80 as suggested and it works like a charm. At took 5 seconds for your laptop to recognize and connect to it and were without problems since then. Thanks again for the help guys... I hope that I won't bother you again =)

  -Jeremy

• XP SP3 cannot connect to WPA2 wireless network, but can Debian on the same PC.

  I have a Toshiba Portege M200 dual-boot Windows XP Tablet PC Edition with Service Pack 3 installed and Debian GNU/Linux codename Wheezy with Debian non-free package firmware-ipw2x00 allowing my wireless adapter to use and wicd package to manage wireless connections.

  Two operating systems are able to connect to a WPA - PSK network automatically without any problem whatsoever.

  Debian is able to automatically connect to a WPA2-PSK network without any problem, but simply Windows doesn't connect at all.

  Windows shows the WPA2 network in the list of available networks and correctly recognizes as having the WPA2 security.  However, when trying to manually connect, Windows ask me the network key (I have enter), then spend about two minutes «Waiting for network...» "with the usual animation and indefinite progress bar.  Windows back me to the list of available networks window, then shows me not connected to everything as if I didn't choose any.  When waiting for Windows to connect automatically, Windows will sometimes appear a bubble icon connection wireless network saying that it could not connect to one of my favorite networks but that he will continue to try.

  I get no error message or any other message of any kind.  Windows just trying with fanfare and fails silently.

  The two operating systems have updates of installed operating system vendor.

  Someone at - it ideas?

  To give a vision a little to the solution "install a new driver" discussed in the Technet forum thread, it seems that the problem here is the same as that commonly encountered when trying to update printer drivers: a user downloads the new driver and installs it but the problem remains.

  What happens is that if the older driver is not removed all first, it is not replaced by the new driver.

  Windows installs hardware devices using INFs.  They are located in % windir%\inf.  Actually, the previous statement is incomplete.  The first time that a device is installed, Windows uses the INF file to create a corresponding PNF file located in the same directory.  The PNF file is a "precompiled" version of the INF file and Windows Setup actually uses the PNF file because it is "more effective" to do.

  If you download a new driver and replace only the INF file and do not delete the old driver files, when you 'day' the driver, Windows Setup examines the old file PNF which points to the old files and uses.

  Then... either completely uninstall the device or at least delete the PNF file appropriate before attempting to install an updated driver.

  And download the new driver from Toshiba or the manufacturer of the adapter wireless in the computer.  Don't understand from Windows Update.

• a lexmark x 544 to connect to a wireless network does not work

  I HAVE a LEXMARK X 544 & can NOT GET IT ON MY WIRELESS NETWORK - I tried all three wep, wpa, wpa personal options with the key at the back of my router but no luck.  Help appreciated.

  Portable PS & other devices are connected wirelessly.

  Hi Amcfad,

  ·         What operating system is installed on your count?

  ·         You receive an error message?

  The majority of connection inside Windows 7 problems have been resolved by installing the latest driver for the device obtained from the manufacturer.

  http://support.Lexmark.com/index?page=product&locale=en&ProductCode=LEXMARK_X544&segment=support&UserLocale=en#1

  For more information about the update of drivers, see the article:

   

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  I hope this helps.

• Connected to the wireless network, but can't see all the networks

  I want to look at the properties of a wireless network that I'm not connected, but I can't do this, because even though I am connected to the Internet, some networks are appearing on the list. Please see the image as an attachment.

  

  Hello Nathaniel,

  Thanks for posting your query on Microsoft Community forum.

  According to the description of the problem, you are connected to internet but cannot see the wireless network through which you are connected. Perhaps, the reason behind this is that some settings get corrupted. Then try below mentioned methods and see if it helps.

  Have you tried to restart the computer and check the status of your problem.

  Try to run in built store and see if it helps you to solve the problem.

  Automated convenience store is a tool that can find and automatically fix problems with your computer. These utilities are not designed to solve all the problems, but they are useful to try because they can often save your time and efforts.

  Run the network troubleshooter utility:

  Try to follow the steps described in the article mentioned below and see if it helps you to solve the problem.

  Why can't I find a wireless network?

  If the problem persists you can try the steps provided by Professor Grim replied on January 19, 2012 in the thread mentioned below.

  No display in Windows 7 64 bit wireless network

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• New modem. HP laptop, wireless network, but not to the internet connection (local only)

  A wired connection works without problem. I try and wireless connection and it connects to the modem, but only on a "Local" basis only Other wireless devices connect without problem for example telephone, macbook. All solutions?

  Before doing the following, disconnect any WiFi network.

  Navigate to the following location:

  Control network and Internet\Network connections

  Right-click on the WLAN adapter you are using. Click on properties. On the Networking tab, look for Internet Protocol Version 4. Select it, and then click Properties. On the general tab, select the IP address automatically and DNS server automatically get an address. On the next tab, select automatic private IP address. Click Ok. Do the same for Internet Protocol Version 6 in addition, if you have. And then click Ok to close the Properties dialog box. Now try to connect.

  If the problem persists, answer here.