My offices are reorganizing after that the screen saver is running

Hi all

I encountered a problem with El Capitan that I lived for a while and don't have only recently started to nail.  Every once in a while (and), my virtual workstations will reorganize.  I have three desktops that I keep open at work all the time.  Office 1 has applications assigned to him, and the other two do not.  However, Desktop 2 and 3 office often get switched.  It seems to happen after the screen saver has run for a bit, and as far as I know, I do anything to make it.  I know that you can drag - move desktop to manually reorder, but this is not what is the cause.

Someone would have seen this happen before, and to know what anyone?  Or have I met an unknown problem?

Thanks for the help!

Jason

Jason,

What are your settings in system preferences > Mission Control?

Tags: Mac OS & System Software

Similar Questions

  • What can be done so that the screen saver images is displayed in a specific order?

    What can be done so that the screen saver images is displayed in a specific order? (I have about 100 photos in the folder I want to use, but they are always displayed in a random order).

    Hi c. Singman,.

    The random order of the images is by design.  Read the following article about the installer:

    http://www.Microsoft.com/windowsxp/using/Setup/learnmore/tips/Smith1.mspx

    I hope this helps!

  • Silverlight has been installed on my dell with media player and after that the tuner has stoped running silverlight would have something to do with it? I get a low rate and no signal tuner.

    Silverlight has been installed on my dell with media player and after that the tuner has stoped running silverlight would have something to do with it? I get a low rate and no signal tuner.

    Hello

    Thanks for the quick response.

    What web browser do you use to access the links in my previous post?

    If you use Internet Explorer, I suggest to optimize Internet Explorer settings and check if it works.

     

     

     

    How to optimize Internet Explorer

    http://support.Microsoft.com/kb/936213/ro

     

    Warning: Please note that the reset Internet Explorer (IE) resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

     

    If the problem persists, you can reinstall the drivers for the Tuner card and check with the question.

    It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  • Tecra M7 - after which the screen saver will not return

    Occasionally, the screen turns off according to power options, but not coming back when you press keys or the mouse is moved. The only way I can get the screen to wake-up is to transform the notebook into tablet mode and vice versa.

    This always the screen wakes up but is boring to do. This problem is only intermittent and if it has place at all this is the first time, the screen turns off after coming out of hibernation or otherwise turn on.

    Y at - it a fix for this problem?

    Thanks in advance for any help.

    Not easy to say why it happens.
    The display turns off automatically or did you put the laptop into sleep mode.
    This occurs if the laptop is in the PC mode or Tablet PC?

    If we talked about Eve so as far as I know the laptop wakes up not of mode before moving the mouse. You must press the power button.
    In addition, you can wake up a screen with the mouse only moves if the screen saver was.

    However, you said that sometimes happens.
    I put t don't know if this helps, but check the Toshiba driver page.
    Check the versions available and compare. Try to update the graphics driver

  • Error messgae: "the screen saver cannot run because it requires a more recent video card", attempting to display the screen saver and the error code 40 download the fix.

    Original title: cannot run zip; error code 40 (hotfix for the video card)

    Hi, I ' m trying to view my screen saver and it seems to be causing "the screen saver can't run because it requires a newer video card or compatible with 3d graphics." (2030 M-windows7 dell) .thanks Jean-Michel

    Hi John,.

    1. what screen saver are you trying to view?

    2 is confined to a specific screen saver?

    3. have you installed SP1 for Windows 7?

    This problem occurs because of a problem in 3D screensavers.

    Fix error occurs if you have a corrupt hotfix package or may have downloaded the wrong patch for your platform.

    This can also occur if the hotfix is included in SP1 and you have already installed Windows 7 SP1.

    Method 1:

    You must make sure that the hotfix you download is depending on the version of Windows 7 installed on your computer.

    For more information, see the article:

    Error message when you set a 3D screen saver screen saver in Windows 7 or in Windows Server 2008 R2: "the screen saver can't run because it requires a more recent or Direct3D-compatible video card.

    Please see if you can copy the file that you downloaded to another computer or location and try to unpack.

    When you download the fix, save it in a new location (on the desktop) and the password given with the fix allows to extract the file.

    Method 2:

    Step 1:

    You can also try to run the display quality Troubleshooter and check if it helps.

    Step 2:

    You too, try to install the latest version of the Site Web of Dell display drivers and check if it helps.

    Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  • I use my photos as a screen saver file. I deleted some of my photo file, but the deleted photos still appear while the screen saver is running.

    How is the screen saver for the photos?

    Hello

    Welcome to the Microsoft Vista answers Forum!

    Note: files or images will be stored in the same C:\Windows\System32\PhotoScreensaver.scr file after the image is removed from the main location. This is the reason why the photos appear even after their removal. And once you navigate and new photos as your screensaver the old ones will be replaced automatically.

    See the link below to learn more about the Windows Photo Gallery:

    http://windowshelp.Microsoft.com/Windows/en-us/help/a1f7759a-BDA3-4380-b0c1-e25aa28df8671033.mspx

    Hope this information is useful.

    Thank you, and in what concerns:

    Suresh Kumar-Microsoft Support.

    Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

  • Why my computer does not freeze when the screen saver is running

    My computer very well as long as the screen saver does not illuminate. When the screen saver comes on it crashes. I am running Windows 7. Help, please

    Perform the clean boot, and then check. For more information, see the following link:

    https://support.Microsoft.com/en-us/KB/929135

    If the problem persists, please scan SFC and then check. Check the link for more information:

    https://support.Microsoft.com/en-us/KB/929833

    If the problem persists, you will need to reinstall graphics card drivers:
    Uninstall the drivers, reboot the PC, install the drivers, reboot the PC and then check.

  • On NEW laptop keyboard does not work after that the screen keyboard has been activated and then deactivated.

    Look at my friend got a new laptop and went through the whole upward. the on-screen keyboard has been activated which invalidates the real keyboard when the on-screen keyboard has been disabled the real keyboard has NO return. If this is a bug... Fix it. This is not a driver issue, it is not a user error. Stop giving people answers, trying to pretend like it's not not the OS when most people already know that it is.

    I'm sorry, but I didn't not new meant only one day.  And when I got my new laptop, one of the first things I did was to create a point of files, even a day later I had a restore to use - point and that was possible here as well.  I'm sorry it wasn't the case.

    If the system restore option is not available, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

    If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

    If this does not work, you can try to go into the BIOS during the startup (the key appropriate to push appear on the screen to enter the boot menu or boot installation - try them both in turn if both appear. It is possible that the BIOS contains an option to disable the keyboard (which may have been activated by the keyboard on the screen but not changed when disable you the on-screen keyboard) and you may need to re-enable manually.  There is a slight possibility, but it is an option to try.

    Another option to try is to set up a new user account that has never used the keyboard on the screen and see if the regular keyboard works when you connect to this account.  If so, you can simply treat the original as a corrupt account account and use the following procedures to complete the transfer.  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.

    I hope that one of these aid procedures.  I'm sorry if they seem to 'generic', but we do not really know what is the problem - especially since the system is new.  We try and identify the cause and fix the problem at the same time using the procedures available to us.  I suspect there's a registry tweak will correct this problem, but I went through the whole registry, and although I found several referencers keyboard, I could find no which seemed to control or not activate the main laptop keyboard (though it has been in one of the entries that has been encoded in binary that I couldn't read).  It's possible someone who knows more about the registry will respond to this issue with a proposal to amend (or perhaps another solution).

    I hope that one of the solutions I proposed works.  Please post back in all cases we will know whether or not to continue searching for an answer.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • After leaving the screen saver, display shuts off and change to select the user account screen

    I have a windows7 32 bit desktop. While everything works fine the problem is whenever I leave the keyboard and mouse intact even for one minute, the display turns off and change to select the screen of the user. 'Disable the display' and "put the computer to sleep" has been on 'never' and screen saver changed nothing but the problem still persists.

    Please provide the solution

    Hi Sam,

    Sorry for the late reply.

    I understand that when your computer is left idle, the select user screen appears.

    The issue can be caused if the power plan settings are incorrect.

    To get a better understanding of the issue, I want to know:

    1. What is the brand and model of your computer?
    2. You did it changes on your computer before this problem?

    To resolve the problem, try the following methods:

    Method 1: Troubleshooting to be able to run.

    The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'. These settings can help you save energy and extend the life of the battery in your computer.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

    After trying method 1, if the problem persists, try Method 2.

    Note: When you're done, restart your computer and check if your computer works fine. If the problem persists, try Method 2.

    Method 2: Change the screensaver settings.

    I suggest you follow also the suggestion given in the answer by Vijay B answered the

    May 14, 2013.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/disable-automatic-lock-with-Windows-7/1d45e806-6a8a-492C-A0C7-ac85b759ad66

    Please, try the above suggestions and we provide the information required so that we can help you.

  • Extend the duration that the screen saver comes on

    original title: screen saver

    My screensaver turns within 2-5 seconds after a punch key, can I extend the time?

    Right-click on your desktop and select Customize,

    Click on the link at the bottom right, screen saver

    Increase the timing and uncheck the box requires login on wake.

    Record.

  • When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

    Original title: user profile

    My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

    Hello rhunter15,

    There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

    First of all, we run System File Checker to see if you have a corrupt file system.

    • Click Start
    • Click on all programs
    • Click Accessories, and then right-click on the command prompt.
    • Select the Security tab and choose "Run as Administrator"
    • Click on command prompt
    • Type SFC/scannow.

    It will scan and repair any damaged operating system files.

    To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

    KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
    http://support.Microsoft.com/kb/929135

    Once you have finished the clean boot, check again and see if you get the error of parental control.

    If please post again and let us know if that helped pinpoint the problem or if you still need help.

    Thank you

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > Connect wifi > my iphone doesnot ask me activation lock even if my unit is also found on

    every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > wifi connection > my iphone doesnot ask me lock activation that says that your iphone is connected with the old apple ID, please enter the id and password

    I always reset on find my optional equipment please tell me how to activate locking activation so that whenever I have factory reset my phone with finding my camera so my phone always ask an old apple and password

    I do not understand your question, but let me go with what I believe. Looks like you entered in iCloud and erased all the content and settings on the iPhone, and once you go by assigning back up again, you do not see something that you expect to see, for example, a request for an Apple ID. When you go through the installation process to select the language, etc., it must, at some point, ask you to identify yourself with your Apple ID. are you not see this?

    It would be better if you try to describe exactly what you do again. Also, without the help of any sign of punctuation, it is difficult to track everything you ask. Try providing the steps of what you do, and then what you see when you get to the point that you believe that something is going wrong. You mention both an old and new Apple ID, which is rather confusing.

  • Monitor turns to white screen after the screen saver

    Actual title: white screen

    Yesterday, I started to have a white screen on my computer screen shortly after the appearance of the screen saver. Monitor still works but this means it will come out? Screen stay white throughout the night.

    Hello

    (1) do you have made no changes before this problem?

    (2) do you use pictures as a screen saver?
     
    See the below link that supports you in updating the graphics driver and check if the problem persists.
     
    Method 2: Hardware devices do not work or are not detected in Windows
     
    Method 3: You can also try using a different screen saver and check if that helps.
     
    Hope this information helps.
  • Cannot run the screen saver because it requires a newer video card or one that is compataible with Direct3D.

    Hello

    I recently rebooted my computer; (Packard Bell) and now cannot run games or screen savers because it does not start. I think my problem has something to do with a Direct3D card? When I run screensavers, I get this message:
    Cannot run the screen saver because it requires a newer video card or one that is compataible with Direct3D.
    I have the impression that sound when I run the 3D games, such as minecraft or GMOD.
    I run on Windows Vista Edition Home Premium and does not do anything but re - install my computer because it wouldn't start.
    It is not as if the graphics card is not there, so I'm really confused!
    Please help me, like playing games is my favorite thing. ;)
    Charlie
    I also ran minecraft to double check and I got this error code:
    Bad video card drivers!
    -----------------------
    Minecraft could not start because it did not find an accelerated OpenGL mode.
    Generally, this can be corrected by updating the video card drivers.
    -BEGIN 7fe0271 error REPORT-
    Generated 10/10/12 21:04
    -Minecraft Version: 1.3.2
    -Operating system: Windows Vista (x 86) version 6.0
    -Java Version: 1.7.0_07, Oracle Corporation
    -Version Java VM: Java hotspot Client VM (mixed mode), Oracle Corporation
    -Memory: 422585352 bytes (403 MB) / 518979584 bytes (494 MB) up to 1037959168 bytes (989 MB)
    -JVM Flags: 2 total; Xms512m-Xmx1024m
    -LWJGL: 2.4.2
    -OpenGL: ~ ERROR ~ NullPointerException: null
    -Is Modded: Probably not
    -Type: customer
    -Texture Pack: ~ ERROR ~ NullPointerException: null
    -Position profile: N/A (disabled) [can't get system (java.lang.NullPointerException) properties]
    org.lwjgl.LWJGLException: Pixel format not accelerated
    at org.lwjgl.opengl.WindowsPeerInfo.nChoosePixelFormat (Native Method)
    at org.lwjgl.opengl.WindowsPeerInfo.choosePixelFormat(WindowsPeerInfo.java:52)
    at org.lwjgl.opengl.WindowsDisplay.createWindow(WindowsDisplay.java:185)
    at org.lwjgl.opengl.Display.createWindow(Display.java:311)
    at org.lwjgl.opengl.Display.create(Display.java:856)
    at org.lwjgl.opengl.Display.create(Display.java:784)
    at org.lwjgl.opengl.Display.create(Display.java:765)
    at net.minecraft.client.Minecraft.a(SourceFile:233)
    at net.minecraft.client.Minecraft.run(SourceFile:516)
    at java.lang.Thread.run (unknown Source)
    -REPORT of ERROR END bb61788b-

    Hello

    After you reinstall the operating system, you should also go to the website of your computer manufacturer > drivers download section > put your computer model number > search for your operating system and drivers (graphics, audio, etc.) > download and install.

    See you soon.

  • 2000 laptop... black screen after replacing the screen"

    I dropped the cell phone cracked screen, replaced the screen with a controlled with surgeons of the screen. Screen remains black, external monitor works. The brightness keys do not move the progress bar. All bars are gray. (assumes that the replacement is correct). Any suggestions?.

    Solved. I don't have a proper cable connection. All right.

Maybe you are looking for