My OS(C:) ne me laisse pas accéder à tout l'espace à ce sujet.) drive

Similar Questions

• AccèsD refused to my external hard drive: How can I get my documents off this is my hard drive from my old computer.

  How to access my documents to my external hard drive? It's my hard drive to my other computer and it won't let me look at anything.

  See how appropriating a file or a folder in Windows XP , which also applies to Windows Vista and Windows 7. Boulder computer Maven
  Most Microsoft Valuable Professional

• Can I reset user ID/security settings on drive C

  Hello

  I have changed the security settings of the user on my C drive but I think I erased too well:(et maintenant je ne peux pas accéder à internet.)  Can I reset this?  If this is not the case, what can you advise me to do?

  If you want more information please let me know.  I have Windows Vista.

  Thanks :)

  You did changes in the connection on Internet Explorer options tab?

  You can try the food options and reset in the Advanced Settings tab.

• using PIPELINED in VO

  Hello
  
  I have 2 types:
  create or replace type e1e2 () AS OBJECT
  E1 VARCHAR2 (3),
  VARCHAR2 (3)) E2;
  
  CREATE or REPLACE TYPE e1e2_tabtype AS TABLE of e1e2;
  
  and function:
  
  Function to CREATE or REPLACE manage_type (ee in varchar2) return e1e2_tabtype PIPELINED
  as
  E1 VARCHAR2 (3);
  E2 VARCHAR2 (3);
  E CURSOR IS
  SELECT 'o' a, ee two of the double
  Union
  One, SELECT ee 'o1' two double;
  Start
  opening of e;
  loop
  extract the e in e1, e2;
  OUTPUT WHEN e % NOTFOUND;
  LINE (e1e2 (e1, e2));
  end loop;
  Close;
  return;
  end manage_type;
  
  and query:
  Select e2, e1 of TABLE (manage_type (:P))
  
  the query returns 2 rows into a TOAD, but when I create a display on the query object, it triggers error:
  SELECT * from (select e1, e2 TABLE (manage_type(:P))) QRSLT où 1 = 2-ORA-22905: ne peut pas accéder àles lignes d'élément de tableau non imbriquées.)
  The same query works fine without parametrs:
  lselect * table (mamage_sergey_type('0')) - works!
  
  I wonder why a legal query does not in the object view. I saw not all restrictions on the use of TABLE function in the ADF.
  
  I need it to work against Oracle 8i.
  SNikiforov

  SNikforov,

  Try this query to your VO:

  select e1, e2 from table(cast (manage_type(:P) as e1e2_tabtype))
  

  ADF will wrap your query of VO (as you can see) with "select * from qrslt () where 1 = 2 - If your query works fine with SQL * that way, it should work with ADF."

  John

• Charger for blackBerry Smartphones Application detects not device

  Hello, I have a Blackberry Torch 9810 and when I connect it to my Windows 7 laptop. device is detected by the computer, and I am able to access all my files, & add/remove files as I want. However, when I use Blackberry Desktop manager or BBSAK, or run the Application Loader. the three programs cannot detect the device. When you use the Application Loader, where it should say "COM1" or "USB - PIN: UNKNOWN", it's white, & you can't select anything. I'm trying to do two things. Number one: back up my data device & apps; and number two: reload the new OS on the device. -Have you already uninstalled/re-installed Blackberry Destop Manager 7.1 - have installed the USB drivers & modem-(ordinateur n'a aucun problème de détection de périphérique, & me pour accéder àles données de l'appareil) - have already uninstalled/re-installed device Blackberry-device manager is BB Torch 9810; Software is 7.1 Bundle 1997 (v7.1.0.694, platform 5.1.0.507) any suggestions would be appreciated... Thank you!!

  Hello and welcome to the community!

  My apologies for the delay... this site is not a site to paid support, but rather a community of volunteer users who also have their lives to live. Sometimes, things get through... we don't intend to be the case, but sometimes it happens. Apologies that this happened to you.

  I suggest this thread:

  • http://supportforums.BlackBerry.com/T5/desktop-software-for-PC/cleanly-quot-starting-over-quot-with-...

  It begins with a process to start properly, and there is an exchange of views. Note that this is not, by any means, guaranteed to work... but it worked to much to solve the problems they have. You could add to it the use of Revo or another tool to remove own software... There are cases where things are left behind, and if they are corrupt, they can prevent the resettlement work correctly. The goal is to completely, remove from your PC, everything that is in no way, shape, or form associated with BB (registry entries, ignored of records, etc.).

  Good luck!

• CISCO 861 NAT issues

  Hello

  I have a CISCO router 861, and here is the scenario that I want to achieve (in regard to the ISPS and NAT)

  4 FastEthernet

  Assign IP 89.45.204.117 255.255.255.248 (IP x.x.x.x-x.x.x.x)

  Assign IP 89.45.202.117 255.255.255.240 (secondary x.x.x.x-x.x.x.x ip address)

  VLan1 (dhcp server) 10.11.12.0 255.255.255.0 (fact)

  I want to reach 2 tipes of NAT, as follows:

  1. translation of the external internship (if I'm using different IP addresses, I have)
  2. translation of external to internal-(donc je peux accéder à deles de machines privées locales dele de monde extérieur)

  In CentOS iptables, (1) is something like this:

  iptables-t nat - a POSTROUTING-s 10.11.12.20 o $EXTIF-j SNAT - 89.45.204.118 at the source

  In CentOS iptables, (2) is something like this:

  iptables-t nat - a PREROUTING Pei TCP d 89.45.204.117 - dport 80-j DNAT - to 10.11.12.70:80

  As far as I understood, on a Cisco IOS, (2) is something like this:

  IP nat inside source static tcp 10.11.12.70 80 89.45.204.117 80 extensible

  I do not understand how to configure the number (1)...

  The public IP address of FastEthernet 4 PS are setup with IP and ip address secodnary.

  Thank you very much.

  Hello Sebastian,.

  Let me explain such NAT only implemented on Cisco devices from a different perspective - maybe that will clarify things.

  All the translations that you must configure will be configured with the ip nat inside source command, regardless if the connection is initiated from inside or outside your network.

  The ip nat inside source command is used to define a multitude of different behaviors of NAT:

  1. A static 1:1 mapping between the internal and external IP address (no ports). In this way, you essentially expose the entire station with the internal IP to the outside world using the external address configured. At any time, a connection can be started from the inside IP address (and it will be translated to the address that is configured on the outside), or a connection may be initiated at the external IP address (and it will be translated to the address configured on the inside). The map is 1:1 meaning that a single internal IP address must be mapped to a single outside IP address and an external IP address must be mapped to an internal IP address. In other words, you need as many outside IP addresses as internal IP addresses that you want to expose in this way. The syntax of the command is ip nat inside source static I.I.I.I O.O.O.O where I.I.I.I is inside O.O.O.O IP address is the external IP address.
  2. A static 1:1 mapping between an individual internal and external IP and port transport. The behavior is identical to that described in the previous type, with the significant difference that the translation only applies to traffic coming from the individual inside the IP/port combination, or for traffic destined to the individual outside the IP/port combination. This type of translation is configured using the ip nat inside source static {tcp | udp} I.I.I.I p O.O.O.O P where I.I.I.I and O.O.O.O are inside/outside of the IP addresses, p is inside the port and P is the external port. You can use the I.I.I.I and the O.O.O.O as long the translations are unique, i.e. the particular combination of p, or O.O.O.O, I.I.I.I, and P must never be used twice.
  3. A 1:1 mapping dynamic between a set of internal IP addresses and a pool of the same size (or larger) of the external IP addresses. What is this configuration is assigning each inside a particular outside the IP address IP address each time that a connection is initiated from the inside IP address. This mapping exists for a limited period of time and expires at the end of the inside address IP interrupts the communication with the outside world. Therefore, for a long period of time, one inside the IP may get translated addresses to different outside intellectual property, there is therefore no mapping 1:1 fixed between inside and outside addresses. The mapping is only temporary and changes over time. Connections to the external IP address only succeed if there is that a mapping created for this outside the IP, otherwise they do not. I don't know if you want to set up this kind of behavior NAT, so I'm not including an example configuration now. If you want that your NAT is behaving this way, let me know.
  4. A M:1 dynamic mapping between a set of internal IP addresses and a smaller pool of external IP addresses. It is basically the type of NAT Linux behaviour typical SNAT-j when to hide multiple internal IP addresses under one outside the IP address using the address and the port of rewriting. A special case of this configuration is NATting to the external IP address configured on an interface, similar to the MASQUERADE target in Linux.

  Types 1. and 2. in this description do not apply to ACLs because they are static, meaning that they perfectly define the inside and the outside address already. However, the dynamic mappings in step 3. and 4. above must use an ACL to specify which traffic should be translated. If, therefore, using maps dynamic, it is mandatory to create an ACL that selects the traffic to be handled by the dynamic NAT, and Moreover, this ACL must exempt explicitly traffic already managed by static to be also managed by this dynamic otherwise NAT. NAT entries, this traffic could in circumstances poorly translated.

  What you have said, I think you want to go with the types of NAT 1 configuration. and 2. as described earlier in this post. Would this be what you're looking for?

  Best regards

  Peter

• HBO GO - Press ESC to exit full screen

  Version of flash player 11.0.1.152 executed in Internet Explorer 9 on Windows 7.

  With the help of HBO GO I see the message "Press ESC to exit full screen" when I go fullscreen mode and the message does not fade.

  The result is that it is difficult to watch the video.

  Does anyone know if there are support HBO forums?  I ask because the information I've found tells me to report the problem my provider (DIRECTV) and they are clueless.

  I don't know if they have a forum or not, but I could not find official forum by searching all around. I found this info and you can check your environment:

  http://www.hbogo.com/?camp=GoG5&tracking_ID=13670&K_CLICKID=790ef2b7-B9B4-05e8-f3a5-00005b 4f1fcb #help.

  (copy by top of the site)

  "(Vous pouvez accéder à HBO GO à l'aide deles de navigateurs suivants: 1) for Windows: Internet Explorer 6.0 or later (NOTE: Internet Explorer 9.0 with a 64-bit version of Windows is not currently supported), Mozilla Firefox 2.0 or higher, or Google Chrome 3.0 or higher." (2) for Mac OS x: Safari 3.0 or higher, Mozilla Firefox 2.0 or higher or Google Chrome 6.0 or higher. »

  You can check FireFox and Chrome how they work.

  Hitomi

• I have not remenber my SECURITY QUESTIONED this ACC, please help me

  I have not remenber my SECURITY QUESTIONED this ACC, please help me. I have remenber login pasword.

  You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (143383)

• How to convert mp3 to acc in new itunes file 12.4?

  How to convert mp3 to acc in new itunes file 12.4?

  Annoydc,

  Read: Re: suddenly I can't right click to create Mp3s in iTunes.

  

• "We would like to inform that your accοunt expires in 72 hours, it is important to perform a verification of your information from now on, otherwise you accοunt will be closed. Please click the link below"this is an email I received support to itune.

  We would like to inform that your accοunt expires in 72 hours, it is important to perform a verification of your information from now on, otherwise you accοunt will be closed. Please click the link below. This is an email I received support to iTunes and I was wondering if I should do it

  I would not click on any link without further investigation.

  Is the link to an official source of Apple?

  You have a web address or URL of the link that you can post here?

  What happens when you go directly to AppleID or another connection site

  where there is no doubt of the authenticity? • Apple is not usually give

  you a countdown, so I think that the item that you see is a scam.

  PS: If you had a trial subscription to Match iTunes or other item

  You can check personally, or any other service you may already

  charged, the way back to Apple should be a known to ask them.

• Can I convert a playlist of songs imported in the form of files in format MP3 ACC in order to burn a MP3 disc?

  I'm burning a playlist composed of ITunes store downloads and downloads of CDs which all have been imported in the form of files such as MP3 ACC disc.  I realized that somewhere along the way I would be prompted to convert files, but my system iTunes just says that it can't burn ACC files without any conversion option.  What, on the contrary, I am missing to allow me to convert the files so I can burn an MP3 disc?  Thank you.

  Dick

  12 iTunes for Mac: save a copy of a song in a new file format - http://support.apple.com/kb/PH19509 - make sure that you are not using the full screen - https://discussions.apple.com/thread/6777547

• Could not load add module. ACC/ActivClient card reader.

  I have a USB CAC card reader and software ActivClient 6.2. However, I'm unable to add my card reader ACC as a module for Firefox despite me being able to do it in 4.

  I am currently on FF6, just the upgrade of 5 as I thought 6 power to fix the problem. (Of course, I am wrong).

  I tried to search for information on the "impossible to add the module" error, but most of the results of research provides solutions for free software on various Unix operating systems.

  The information most relevant dealing with Windows and ActivClient are about 11 months and I already tried to follow it, only to see it does not work either.

  Help? I kinda want to or need to access Web sites.

  Try:

  • [752709/questions/752709]

• change AIFF to ACC or MPEG

  How can I convert AIFF to ACC or MPEG?

  Used to make all the time, but not for a long time. I would overlap with an air of mine that I recorded in GarageBand, and then somewhere in iTunes I'd like to find a window allowing me to change the format.

  Main reason for sending my songs by e-mail.

  With the help of iTunes 11.4 (18)

  Did iTunes down this feature? Hope not.

  12 iTunes for Mac: save a copy of a song in a new file format - http://support.apple.com/kb/PH19509 - make sure that you are not using the full screen - https://discussions.apple.com/thread/6777547

• A friend gave me his iPad 5.1.1 iOS.  I plugged on my desktop to load (I have also 2 iPod Touch from my iTunes library), but the iPad indicates there is no SIMcard (?) and that it does not load.  That pasa?

  A friend gave me his iPad 5.1.1 iOS.  I plugged on my desktop to load (I have also 2 iPod Touch from my iTunes library), but the iPad indicates there is no SIMcard (?) and that it does not load.  That pasa?

  The iPad does not have a SIM card. Most are wifi only.  The USB jack on the side of a machine very likely does not provide enough current to recharge an iPad. Use the power supply provided 2.1 watts (if you have one - if it isn't get a).

• Hola mi compu if podia had very Días ago canciones y ahora no is pasa sale error y ago veo y none are el problema mi telefono

  Hoy mi compu not self-evident x q no me pasa canciones friend celular sale error y el problema not're mi telefono

  Hello

  Sorry, this forum is in English only.

  Please select the language icon at the bottom of this page and select your language from the list to display the forums in the language of your choice.

  If you can't find the language of your choice, support for international sites additional options can be found by clicking on the following link:

  http://support.Microsoft.com/common/international.aspx

  Concerning