My p6000 resumes signal from the wireless router. He has worked for months, has left, any help?
HP Pavilion p6631p
Windows 7
I have a slightly new wireless router and the PC is always connected like this, but in the last days he will not pick up any signal from my router or our hot spots of our my touch 4g cell phone.
It will not work so hard cable...
Occasionally, he'll go get a weak signal, but I think there out crapped on me, anyone else having this problem?
Warranty has expired 3 weeks ago! Pissed! I think they do it on purpose.
If the antenna wire is not damaged or not connected, I would consider looking at an ASUS, Linksys, D-Link or Netgear PCIe x 1 or wireless USB adapter to replace the original one. Here is a selection of Newegg.
Tags: HP Desktops
Similar Questions
-
AirPrint is not working since 9.3.1 what airprint update - not found. tried the suggestion of JimHdk, who worked for a single document. any suggestions
Since we do not know what may have suggested to Jim, power cycle your router and the printer and force restart the iPad. Unplug the router and the printer power for 30 seconds. Plug in the router first and let it restart. And then reconnect the printer power supply. Then force restart the iPad. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.
-
computer does not receive a response from the wireless router
The wireless router sees my computer wireless MAC address, but never assigns an internet address. Can anyone tell me what the Protocol of communication happens. Could help me solve the problem. Thank you.
ROCKST * R, I saw your answer on the firewall, so I advanced and off. Now, I can connect to wireless internet. I.m a happy camper. Thank you.
-
Is it possible to restore the options in the Panel have no option of available power
Hello Braunmab,
Thank you for your message. Try to get to you the options of Hibernate that way:Right-click on the desktop and select "Properties".Select the "Screen Saver" tab > click on "Power Options."In this window, you should see options to Hibernate / sleep.Please let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
I have both a laptop and a desktop computer and use a modem wired high-speed internet. I bought a router "Netgear" 5 port so that I could have both online at the same time, but when I connect my computer to the router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access. It gets very tedious, please help...
Original title: router does not work...
Hello
Welcome to the Microsoft community.
I see that when you connect multiple computers using the Netgear router, it does not recognize the signal from the modem.
You must contact the ISP to verify if they can help you with this question.
In addition you can keep these items handy, it might help you.
Set up a wireless router
http://Windows.Microsoft.com/en-in/Windows7/set-up-a-wireless-router
Install or remove a modem
http://Windows.Microsoft.com/en-in/Windows7/install-or-remove-a-modem
Change modem settings
http://Windows.Microsoft.com/en-in/Windows7/change-modem-settings
It will be useful.
If you need help with Windows, let know us and we will be happy to help you.
-
I have a Toshiba laptop 64 bit running Windows 10 Home, 8 GB, 1 t hard drive.
Router is a Samsung phone using Android because it was the only router that I could find which would take the wireless signal.
I live very pastoral, no neighbours for miles, so I never saw the need for a password on my router.
Now, some people are installs in less than 400 feet from me, and I think they're piggybacking on my Wifi because my access speed has slowed considerably since they moved in.
So I decided to change the password of the router, unfortunately, I can not put in any password I want. It gives me the opportunity to have a predefined password. So I changed the name of the router I could do without problem.
My computer very quickly without any problem, however, my printer which worked great for a year with the old router name does not connect on the new name of the router.
Here is what I tried:
I had hoped he would ask me for a new name / password, but it did not.
Then I plugged a cable between the printer and the laptop in the hopes that it would produce a different kind of results. It has not changed anything. There is no screen menu on what that be like this on the printer.
I pressed the wireless button that has the flashing blue light and nothing happened.
I pressed the button, don't know what it is, but it has a white light, and nothing happened.
I went on the HP site and followed the instructions but he just said do not connect the cable until told to do so. So I disconnected everything, lights out and turned back on and still no connection and no invite to plug whatever it is.
Y at - it everywhere where I have being a novice could get instructions on how to get this working?
I appreciate any help you can give me. Thank you.
Hello
I think you are talking about SSID. Please, think of it as a new router and use the following ways to correct:
http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html
Kind regards. -
HP 5530: Printer does not recognize the wireless router
Printer worked so well. Moved and changed via AT & T Uverse and printer HP 5530 network will not recognize the wireless router information. I uninstalled the printer from my ASUS laptop and tried to reinstall nothing doesn't. The cd supplied with the printer woould check not the printer again. The printer is less than a year. I don't know what is happening. Can you help me solve this problem?
Replacement of your wireless router try here.
http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html
-
HP Officejet Pro 8500 has more: impossible to reconnect to the wireless router
Have had the printer for four years. Has been connected to the wireless router earlier today.
When I try to set up the connection again, he asks for a WPA key.
He never did that before, just asked the network password.
From bottom of router WPA, it matched correctly, get the error message saying "authentication failure".
Several attempts, same error.
Reset setting factory (menu) wireless - no change.
Restarted printer - no change
Restarted router - no change
Hello
WPA key is your network password.
Kind regards.
-
My Deskjet 3050 series J611j was ooriginally configured with Mac OS Snow Leopard. I have since installed Lion (10.7.3). I inadvertently reset the default printer and it stopped connecting with the wireless router. I installed the new software HP Lion but when I go through the installation, after that I tell the printer to connect to the router, I get a message saying that the device is not connected to the computer and connect with a USB connection. But it is connected with a USB cable.
I fixed it by pulling on an old PC and launch the CD. Who got up the printer on the wireless. from there, I could finish and connect with the Mac. Thank you.
-
Connection printer HP Photosmart C4500-serieis to the wireless router.
I had to reset my router and in so doing, he has changed the SSID and I had to change the password. My laptop is connected to the wireless router, but my HP Photosmart C4500 printer does not recognize the change. How to re - setup the printer with the new information. I tried all the wifi settings available on the printer with no luck?
I have run the wireless network test report and he has failed in trying to recognize the SSID
Thank you
Hi you two,
I recommend you try printing HP and doctor Scan. It's a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity. Click on the link below for more information on how to download and run the tool:
http://goo.GL/QsIAx -
I received a message on my laptop that says could not connect to the wireless router and it make reference to section of the knowledge base Microsoft 87112 for more information.
I think you have transcribed the number incorrectly. I think that the article you want is this one: http://support.microsoft.com/kb/871122
-
TouchSmart 610 unable to receive the signal from the configuration box
I have HP 610 TV tuner equipped touchsmart all-in-one. TV work very right up until a few days ago, when I couldn't have a signal from the cable box. Box has changed and cables without result. Tried a HDMI cable, but can't find the source selection. Hung a small tv for the area with a perfect image, so that the excluded the cable/box issue. Very grateful for any suggestions/advice/help. Thank you!
Hi again SuZQT,
It is good to hear from you!
To enable your system to receive a signal once more, I recommend you to return your system to a previous restore point before the problem occurred. This can be done by following the steps described in this document on using Microsoft System Restore (Windows 7).
Please re-post with the results of your troubleshooting, and I look forward to your response!
Concerning
-
Signature problems, the wireless router.
I have a problem of signing on the internet through a Linksys WRT54G2V1 wireless router model. I use Windows Vista Service Pack 2. When I start my computer, it is not the sign on the internet, even if it is connected to the wireless router. Address ip/4 shows 169.254.42.23. After I unplug the router for 20 seconds and then plug it in again, my computer will sign it on the internet. 192.168.1.100 is the ip/4 address. In the meantime, my wife's computer has no problem signing on the internet via the wireless router. When I start my computer, it uses the address 169.254. He has only started to do this recently. What should I do to fix my sign on the problem?
Hello
Have you tried the steps suggested by Yakub K for the same problem?
If this isn't the case then try the steps and let us know the results.
Put on the link: http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/problems-while-trying-to-access-internet-using/21c0ea5f-5ce7-4d9a-b4bd-28fafa4d023e.
-
enquery for wireless router which has the support of UPnP2.0
I am looking to buy a wireless router that has the ability to UPnP and conforms to the standards of the IGD 2.0. PL you can help me help what model of Linksys router has this feature built-in.
Model of router E4200 of Linksys compatible 2.0 of the IGD.
-
Black screen on startup after installation of the wireless router
I recently installed a Netgear Wireless - G Router (WGR614) on my computer vista HP laptop and since then, I have experienced a few problems. One day my computer was working fine. I stopped it and when I went to leave the next day morning, the screen was black with a bunch of small lines. It would not load anything so I stop and tried again. It's the same thing. I turned on and close my count, and when I opened it upward a few minutes later the screen was beautiful. Then, I have lived the "Blue Screen of death" 3 times. I researched what the problem might be and thought that I might need to update a driver. I went to HP Health Check and there were a couple of updates on a wireless adapter and a card reader, so I installed the updates. I have not experienced the blue screen since then, but I still have problems with the black screen when starting upwards. If I leave the computer open the black screen turns to a white/blue color and nothing loads. But if I close it then after a minute or two everything is. This could be the cause?
Hello
Start with the wireless router is not the cause of the problems. It is a stand-alone device that simply provides a network connection for your system. Offhand, I would say that you experience a hardware failure, and perhaps the time is simply coincidence. Knowing what was the error message stop can help to indicate where the problem lies, but your description of the problem is quite indicative of a hardware problem. Solve it will probably require involving a technician (contact HP if it is still under warranty).
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
Maybe you are looking for
-
Satellite M70-131: display turns to a sometimes white or green color
Hello, I hope someone could be of any help to me. I noticed lately that while iam working on my laptop suddenly the display screen turns a color to the sometimes white or green other times a color... and I can't go out this State unless I restart fro
-
Satellite L505-13j - cannot use the FN keys after 5-10 minutes
Hello I have problems with my "FN" key When I restart my system, everythings went well with it, but when I used about 5-10 min of my computer, I can't use FN more.I don't know why. Can someone help me?
-
Small is my first experementing with globals time functional After being recommended to read this thread http://forums.ni.com/ni/board/message?board.id=170&message.id=240328&query.id=5387854#M240328 I decided to start with just a functional global (I
-
install the Telnet Service for remote access
How do we install the telnet service on my pc I can access the pc from anywhere under the same gateway.
-
Black screen with flashing underscore concerns after removal of Rootkit
HP Envy laptop (Win 7)Microsoft Security Essentials identified the Alureon trojan/rootkit, but could not clean after numerous attempts. I downloaded Malwarebytes Anti-Rootkit and it ran. He found and cleaned 3 threats. After completed cleaning, the l