My password do not work
When I put my correct username and the correct password
She said: we cannot open Skype.You are already signed in on this computer. Please log out and try again.
I solved the problem, it is because it is blocked and I can not connect because it was this file
Oops
Tags: Skype
Similar Questions
-
My password does not work. "" Contact ID does not recognize your fingerprint ".
My password does not work. "" Contact ID does not recognize your fingerprint ".
See 'Get help with Touch ID' here:
-
my master password does not work, WHY?
I used my master password for quite awhile. Today when I put it in it does not work. HOW CAN THIS HAPPEN? I saw the the way to remove it, but then I lose about 28 login and password for all my financial sites. Why the P/W does not work? AND why would you if it can FAIL. Y at - it another way around this in addition to a total deletion of all my other passwords. I tried to restart my computer a couple of times to see if it would fix itself, but nothing helped.
Have you tried to close and restart Firefox or restart the computer to see if it have an impact?
What security (firewall, antivirus) software do you have?
If the MP password does not work and is not accepted if you get a prompt to connect to the software security device, then it is likely that the signons3.txt file got damaged or replaced by an older version.
You have a backup of files in the Firefox profile folder?
-
can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box
Are you sure that you do not have to register on this site through the usual way and what you should be used elsewhere on the site?
Have you tried to contact them to help this topic or to check if they have a FAQ on this subject?
I found this in another thread that you created [*]:
I'm not sure do I bought a home income internet james ashley program and I copied the login info I was given and the password does not fit into the window of password and I forgot the link password does not work I sent emails, but do not receive an answer im don't know what to do is anyway you can help me to recover my info or help me change the password?
I assume that you have downloaded and installed this program and need to use this password in this program or only you can use these data to download the program from the site james ashley?
-
After software update today, my password does not work. My phone is now disabled. I don't have a backup. How can I start to use my phone again and not lose all my content? Help, please.
You can not
-
I updated my Apple ID, but only old man always appears when I try to update my password does not work with the old id. Can anyone help?
You can try to log in to your old account and then sign in with the ID again. Your applications will be always related to the original account - you must use the old account to update.
-
Hello.
When I try to change the settings of iTunes store password does not work: System doent recognize the apple ID account password
Sign out and then sign in again the apple between the device and what not ID recognize the password very well, but when Im going to change all password parameters, system ask me the password again, I write and ask again... n times.
I tested in different devices, iphone and ipad, with two different accounts and beta of ios 9.2 and 9.2.1. Still the same error.
The problem is that when I try to download a free app from app store ask me the password and does not work so I can't download any new script.
Thanks for your help.
Best regards.
Hello bdepaco,
Thank you for using communities of Apple Support.
I see that you have any questions, change your password ID Apple via iTunes. Have you tried to change your Apple ID account page? Take a look at the following article for the steps:
Once you have changed your Apple ID password, it presents a few additional measures to be taken.
What to do when you have changed your Apple ID email address or password
Best regards.
-
I just 6 s phone and when I try to buy stuff, it says "enter a password for santosjim@***". It's not my apple ID and my password does not work
The phone that you have just bought is not new. It is locked to its previous owner.
-
My password does not work on Microsoft Money 2004.
Password does not work on Microsoft Money 2004. Our accounts are here! Can we get in? All the answers (well over!) would be welcome.
original title: Microsoft Money 2004Kathryn
I post this question to the course on the Microsoft Money forums:
http://social.Microsoft.com/forums/is/money/threads -
Need help my e-mal cases. reset password does not work.
How can I case my email I tried to reset password does not work. I forgot my password and it is entered repeatedly. I want to be to my e-mail or deleate my account. Help, please.
Hello
Is Hotmail or Windows Live Mail email? If this is not the case, contact the mail provider.
HotMail has its own Forums, so you can ask your questions there.
Windows Live Solution Center - HotMail - HotMail Forums Solutions
http://windowslivehelp.com/Hotmail - Forums
http://windowslivehelp.com/forums.aspx?ProductID=1Hotmail - Solutions
http://windowslivehelp.com/solutions.aspx?ProductID=1How to contact Windows Live Hotmail Support
http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htmWindows Live Hotmail Top issues and Support information
http://support.Microsoft.com/kb/316659/en-usCompromised account - access unauthorized account - how to recover your account
http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41Hotmail hacked? Take these steps
http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx------------------------------------------------
Windows LiveMail has its own Forums, so you can ask your questions there.
Windows Live Mail - Forums
http://windowslivehelp.com/forums.aspx?ProductID=15Windows Live Solution Center - Solutions mail - Mail Forums
http://windowslivehelp.com/Windows Live Mail - mail Solutions
http://windowslivehelp.com/solutions.aspx?ProductID=15I hope this helps.
-
When I turn on my pc it loads windows vista but somehow my name and my password do not work now. I can go in safe mode, but it won't let me change the name or password. I wonder if I can just get on with windows 7 or 8 without being able to access my current windows vista?
Hi Sean,.
Please follow the methods.
Method 1:
Follow the instructions from the link
What to do if you forget your Windows password
http://Windows.Microsoft.com/en-in/Windows-Vista/what-to-do-if-you-forget-your-Windows-password
Method 2:
Follow the instructions from the link
Boot from the Windows 7 DVD to perform a custom with formatting the hard drive installation.
Installation and reinstallation of Windows 7
http://Windows.Microsoft.com/en-in/Windows7/installing-and-reinstalling-Windows-7
NOTE: before starting the installation. should be ready for the worst case scenario that leads to your existing data on your current computer to delete. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before you start the installation.
Reference links:
System requirements Windows 8
http://Windows.Microsoft.com/en-in/Windows-8/system-requirements
How to upgrade to Windows 8
http://Windows.Microsoft.com/en-in/Windows-8/install#1TC=T1
-
had dsl fixed today, but my outlook express password does not work. How can I reset or start over with a new password
You must use the same password that you would use if you have access to your messages via the Webmail of your server site. You will need to reset it with them.
-
Try to get KB888111 got a patch file sent too me, but given passwords do not work too me!
I tried too get KB888111 for its installation of said Realtek drivers I need to install before I install audio drivers which can do now?
I have reseved hotfix support, but passwords do not work!
Hello WesleyMorris Jr,
Unfortunately, there is little that we can do on the side of the forum to provide you with this fix.
It will be necessary to contact Microsoft Support by phone at 1-800-Microsoft.
Best regards
Matthew_Ha
-
Friday when I signed up computer turned off, everything worked very well. Today it lit, and all of a sudden my password does not work. I had the computer about two years and everything was fine with the same password. Someone might have tried to sign without the correct password - would he have it? I don't know what to do, but must enter into the system! Any sugguestions?
Friday when I signed up computer turned off, everything worked very well. Today it lit, and all of a sudden my password does not work. I had the computer about two years and everything was fine with the same password. Someone might have tried to sign without the correct password - would he have it? I don't know what to do, but must enter into the system! Any sugguestions?
If you have a Vista DVD, please use this tutorial from Microsoft Support:
http://support.Microsoft.com/kb/940765/en-usHere's another same tutorial, but from another source;
How to regain access to your administrator account tutorial link For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem. -
Cannot connect to my Windows Vista system that my password do not work.
MY TOSHIBA EQUIUM LT IS 6YO. I HAVE THE RECOVERY DISK.
AN outfit that have been paid eighty-five pounds for the support of a year now claim to allow to recover my LT I need windows vista disks to ensure my ability to log on as administrator and user. The two passwords do not work on windows vista edition access home premium
Hello JohnBURTISM,
See the link below for more information. I hope this helps.
Microsoft Answers: password forgotten, lost password/drive recovery disk
-
The reason for the update of the firmware has been that the router would constantly disconnect, even if the ISP has been connected. I was hoping that would solve the problem.
Failed to connect to router just after the firmware has been updated successfully (what said on the screen), but could not use "continue" to to precede.
Because the screen indicates the success, I closed the browser and reset the default router.
The next step in the process is to access the configuration page of the router web-based and restore my settings.
The PROBLEM... Now my password does not work to allow me access to the page of the router's web-based Setup to restore the settings.
I have an account, but nowhere in the account he mentions the password settings.
When you reset the default router, the router returns to a cache of user name and a password of 'admin' (without the quotes). Please try to connect to your router.
If you continue to have problems, then you must try to reset the router by default.
To reset your router by default, follow these steps:
(1) turn off all computers, the router and the modem and disconnect from the wall.
(2) disconnect all the wires of the router.
(3) turn on the router and let it start up completely (1-2 minutes).
(4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
(5) turn the router.
(6) connect a computer cable to port 1 of the router (NOT to the internet port).
(7) turn on the router and let it start up completely (1-2 minutes).
(8) the power of the computer (if the computer has a wireless card, make sure it's off).
(9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
(10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Leave the user name blank and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen). Exit your browser.If you get this day without problem, try the Setup disk (or configure the router manually, if you prefer) and see if you can get your work and router configuration.
If you can not ' response to... ". "in step 9 above, your router is probably dead. A report with this problem
If you get a response in step 9, but cannot complete step 10, is that your router is dead or the firmware is damaged. Related to this issue.
If you need additional assistance, please indicate your ISP, the make and model of your modem, the firmware version of your router and the results of steps 9 and 10. In addition, if you receive error messages, copy them exactly, and report.
Please let me know how things turn out for you.
Maybe you are looking for
-
Problem with M30x-118, WIFI, WPA, blue screen, Reboot
-J' have a Toshiba Satellite M30X - 118 1/2 years-J' have all updates MS new beginning of 19.07.05-J' have uptodate Bios Toshiba to the 19.07.05-J' have uptodate Norton Security 2004 beginning of 19.07.05-J' have a WIFI router at home with WPA active
-
Blue Screen on Satellite P100 - need to recover data
Putting on my laptop yesterday, I was faced with a blue screen error message that even after running chkdisk keeps appearing, even on reboot in safe mode. The problem is I only have the Toshiba recovery disks (not a disc XP - XP was preinstalled on y
-
Satellite L300 - 2 6 (PSLB8E) connection problem XP WLAN
Hello I didn't speek good English... .but hopefully some1 help me with WIFI problem on 'toshiba satellite L300 2 6 PSLB8E.I was reinstal system from vista to Windows XP sp3 Everythink is right only works doesent WLAN "Atheros AR5007EG" correct or som
-
HP Envy Phoenix 850-150QE: reinstall the Audio from Realtek HP Manager
My new PC equipped with a Blu Ray player: BD RE BU2ON HP. It will burn 50G blu ray discs? I need to know before I blow the money for a full line of them.
-
XControl publish subscribe?
Hi all I'm trying to implement a publication if subscribe model messaging using XControls and LVOOP. I have various XControls that represent different views of the State of an object. I want all my (clients) XControl to be updated when the object (ed