my password does not work on windows vista. I get the message user profile service has no logon

My password does not work. I get the message user profile service has no logon. Help please.

Hello

You can try the following.

Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

Another option if the above does not help is as follows.

Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • "the key to upgrade to an edition of windows does not work with Windows Anytime Upgrade" was the message received when you use the code comes to purchase Microsoft online. Any suggestions? »

    Upgrade Windows 7 Home Premium to professional.

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • Cannot change user: "the user profile service has no logon. "User profile is not found."

    When I try to do on my side of the computer (change username) it says «user profile service does not log» "User profile is not found."

    ·                        Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work:

    ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    See if the information in the above tutorial will help you.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947242

    A temporary profile is loaded after you connect to a Windows Vista-based system

    See you soon.

    Mick Murphy - Microsoft partner

  • lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

    Question
    better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
    Details

    In current versions of Flash you can also do this via the control panel.

    • Control Panel > Flash Player, click on remove and erase data
  • Why CRYSTAL_REPORT program does not work with windows Vista? __

    Why CRYSTAL_REPORT program does not work with windows Vista?

    http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

    Windows Vista Compatibility Center

    First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

    If this is not Vista compatible, read the info on the link above.
    It works for some programs, but not all.

    This applies to software programs, NOT hardware drivers.

    If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

    See you soon.

    Mick Murphy - Microsoft partner

  • I want to install a trial version of indesign CC but the username and password does not work. Is my username and the same password I use to connect to Adobe?

    I want to install a trial version of indesign CC but the username and password does not work. Is my username and the same password I use to connect to Adobe?

    I work on a Mac computer

    Hi Tania,.

    He could be induced to Mac username and password.

    Kind regards

    Sheena

  • while trying to install sketches of painter Corel on 32-bit Windows Vista, I get the message of the CXML File() - > could not IID_iXMLDocument2 instance. .

    while trying to install sketches of painter Corel on 32-bit Windows Vista, I get the message of the CXML File() - > could not IID_iXMLDocument2 instance. After the closure of this msg several times I get the message .xml configuration could not be loaded. This may indicate that the file is corrupted. I tried downloading the software and the software disc and get the exact same message. Does anyone have any ideas as to what is happening and how to fix it?

    Hello

    ·          You have an earlier version (trial version) of Corel painter, installed on the computer?

    Step 1: If you need to uninstall the trial version and then try to install the full version of Corel painter.

    See: http://www.corel.com/servlet/Satellite/us/en/Content/1248977106333

    Step 2: I also recommend you contact Support Corel to this topic and see if they have a solution - http://www.corel.com/contactus

  • Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

    Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

    Hello

    1st thing to try is the system in safe mode restore to before the problem

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not solve it read more

    read the tutorial below

    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

    The user profile Service has not logon. User profile cannot be loaded.

    http://support.Microsoft.com/kb/947215#letmefixit

    Your user profile was not loaded correctly! You have been logged on with a temporary profile.

    http://support.Microsoft.com/kb/947242

    If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  • Password just changed an hour ago. I can not connect. Error: "the user profile Service has no logon. Unable to load the user profile.

    Original title: just changed password an hour ago. I can not connect.

    Password just changed an hour ago. I can not connect. I don't have a password reset disk. When I type the password and press ENTER, the next page says ' THE SERVICE PROFILE has NO logon USER. USER PROFILE CANNOT BE LOADED. »

    Hello
     
     
    This error can occur if the group policy setting "do not connect to users with temporary profiles" is configured.

    Try to connect to your computer from another user account and follow the steps listed in the article below.
    Check out the following link and follow the steps to solve the problem:
    Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215
     
    Note: If you do not have any other user account the computer checks to see if you can boot to the desktop insafe mode , and then perform the steps listed.
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • In Windows 7, cannot access the user profile get the error "the service user profile Service has no logon.

    When you try to access the user profile, get the error message "the service user profile Service has no logon.  User profile cannot be loaded. "The new profile tried to go through the steps of profile user fix damaged by ms, but trying to create a new user profile to copy the files from the damaged user profile does not display on my C: drive the users folder (as it should).  Anyway to fix the corrupted if user profile profile are available?

    Hello

    References to Vista also apply to Windows 7.

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
    Mode has no default password (unless someone has changed the password so it should be available).

    Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
    has been known to cause this problem.

    Error message when you log on a Windows Vista-based or Windows 7 using computer a
    Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "your user profile was not loaded correctly! You have been connected with a
    temporary profile. "in Vista
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    BE VERY CAREFUL IF YOU USE THIS ONE:

    DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

    How to enable or disable the built-in Windows 7 Administrator account
    http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

    Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
    This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

    You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
    (or two with the same password) use a test or fix the other.

    You can run the Admin account hidden from the prompt by if necessary.

    How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    What are the system recovery options in Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
    always leave to an Admin who is not used except for testing and difficulty account).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps.

  • Error message: the user profile service has no logon. Profile of user was not found.

    Just after that Microsoft updates yesterday we received the following message: the user profile service has no logon.  Profile of user was not found.

    The user is locked.  I tried the system restore, but the computer does not. I don't have a disk of Vista to re - install.  Peux-I re - install online?  I have the product key.

    Thank you

    Joe R.

    ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    See if the information in the above tutorial will help you.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947242

    A temporary profile is loaded after you connect to a Windows Vista-based system

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Also ask them if it is possible to do the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are running correctly.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/default.aspx/KB/326246

    'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

    See you soon.

    Mick Murphy - Microsoft partner

  • Not able to connect to the user account, error: user profile Service has no logon

    I'm on a HP Pavilion dv7 with Windows 7.  I created a user account for my wife but she cannot open a session because of the messages "the user profile Service has no logon.  User profile cannot be loaded. »

    Where and how can I fix it?

    Thank you.

    Larry

    Original title: need help with setting up an account

    Hi Larry,
    Thanks for posting your query in Microsoft Community.

    From your description, it seems that you are not able to connect to the user account when you try to connect you get following error. The user profile Service has no logon

    This behavior can occur if the user profile was deleted manually using the command prompt or by using Windows Explorer. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry.

    If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

    To resolve the problem with the user account, you can follow these steps:
    Method 1:
    (a) click Start, type regedit in the start search box, and then press ENTER.
    (b) search for, and then expand the following registry subkey:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

    (c) right click the SID that you want to remove, and then click on remove.
    (d) log on to the computer and create a new profile.
    You can also check this link:
    Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    Important: The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    Method 2: Also, see the steps in the following Microsoft article:

    (a) error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    Note: We strongly advise against making it the standard way to remove the user profiles on computers. Documented and supported approach is using the system advanced settings in the system, "Profiles" settings properties For programs, it is available using the API 'delete profile '.

    If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

    (b) how to back up and restore the registry in Windows
    Back up the registry
    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    (c) IF you still have the problem then you can follow the link provided below to fix the damaged user profile.
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    For any Windows help in the future, feel free to contact us and we will be happy to help you.

  • I get the message "the user profile Service has no logon. User profile could not be found. How?

    Compaq Presario CQ3160D desktop PC

    Windows 7 Home Basic 32

    When I connect to the correct password, the message "the service user profile Service has no logon. Profile of user was not found. "That message was met on the morning of 12/07/2011 from. I remembered that as I logged on the night of 12/06/2011, I had to wait 1 1 update. After this 1 update, things have changed. How to solve this?

    Hello

    You can try the following.

    Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon (if ideally 12/05/2011 or before) and then do the restore.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

    Another option if the above does not help is as follows.

    Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

    Kind regards

    DP - K

  • New user account will not identify you. Error Msg: "the user profile service has no logon. Already tried the registry option (list of profile edition)

    Hi guys,.

    (I already tried this https://support.microsoft.com/en-us/kb/947215)

    I have usually need two accounts on my system. I lent my laptop to a friend for a few hours and asked him to connect with the guest account but he got "the user profile service has no logon. User profile could not be loaded"error message. So I tried to create new accounts (standard and administrator), but nothing works. I am able to connect to my account but not to other accounts, I have create on my system. Pls help

    OS: Windows 7 Home Premium

    Hello Shashank,

    Thanks for posting your query on the Microsoft Community.

    I imagine the inconvenience that you are experiencing and I appreciate your efforts taken to solve the problem.

    I suggest you refer to the suggestion of Nithyananda J replied on February 15, 2010 and check if that helps:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Security/Windows-7-Administrator-logon-failed-user-profile/04652778-1646-4bc9-9f5f-1c20273af15b

     

    Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How to back up and restore the registry in Windows

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Thank you

  • User cannot connect again PC Windows 7, error "the user profile service has no logon. User profile cannot be loaded.

    Our plant manager just got a new PC and I've set up with Windows 7.  I can log on fine using my user account.  But when it tries to connect, it receives the "the user profile service has no logon. Error could not load the user profile.  It can connect to other computers fine, Windows XP & Windows 7 computers.  It's just that a laptop could not connect to.

    It was a VIP user.  He's my boss of bosses bosses if you know what I mean.  What I can do.  I tried "patches" for the mistake that I found online, but none of them helped.
    Help me!  Please, I beg you!

    I did other tests just now and I seemed to have found a "solution".  Here are the steps:

    1 Add the user to the local Administrators group
    2 log in as a user
    3. close the user session
    4 log in as network administrator / local
    5 remove the user from the Administrators group
    6 log in as user
    7. the success!
    Still do not understand what was going on the devil, but at least I know the work around her now!

Maybe you are looking for