my password on my windows xp was chanded and now I can not connect

Similar Questions

• I reinstalled Windows XP & he said that if I continue, I'm not able to connect to Windows. I hit continue, and now I can not connect.

  I reinstall windows xp & he said that if I continue, I'm not able to connect to windows. I accidentally hit continue and now I can't log on. Help, please. What should I do now? Lynn B.

  original title: Reinstalling windows xp

  Hi Lynn B,.

  ·         What is the exact error message?

  ·         What type of installation you perform? Is this an upgrade or fresh on-site installation?

  ·         What service pack is installed on your computer?

  ·         You have the Windows installation disc?

  You can consult the following Microsoft articles:

  Install, reinstall, or uninstall Windows

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

   

  How to perform an upgrade on the spot (reinstallation) of Windows XP

  http://support.Microsoft.com/kb/978788

  Hope this information helps.

• Installation of Vista on the new hard drive was interrupted, and now I can not start the computer

  So I decided that I need a bigger hard drive. I got a 500 GB hard drive, so I have it PLOPPED in my Acer Aspire 5517 with my vista boot drive, turned on and began to go through the process. Once he got to the phase 'installation complete' it seems to take a while, so I let it run all night. Once I got up, it was on a black screen with the mouse, I let stand a few more minutes but still nothing. I turned off and started it expects to find to return at the beginning of the installation, but instead he began to start from what is on the hard drive at this time. It got to the screen with the loading bar and the sign 'Microsoft Corporation'. The loading bar was very frigidity and stopped and started randomly. I let it do this while I went to school, but when I got home, it was always the same loading screen. I rebooted and tried to start in safe mode, but when I do it it stops at crcdisk.sys, and never forwarded charges. I tried to do the reset thing factory start it but that doesn't seem to work. My other puny hard drive still works, but the other does not. I searched the internet but have not seen any other problem like it. I want to just start completely clean of my new 500 GB. Please help!

  Hi James,

  1. What is the number of brand and model of the hard disk of 500 GB?

  2. How did the 500 GB hard drive connected to the computer? It is external or internal?

  To troubleshoot the unable to start the issue to cause corrupted driver, some files that can not be loaded during the startup process must be fixed or restored. So, let's check the disk by using the Windows Recovery Console.

  (a) put the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD ".

  (c) select a language, a time, a currency and a keyboard or another input method, and then click Next.

  (d) click on repair your computer.

  (e) (click on the operating system you want to repair), and then click Next.

  (f) in the System Recovery Options dialog box, click command prompt. Type chkdsk c:/f to try to correct the errors.

  (g) Note: answer them when chkdsk asks you if you want to check the disk next boot Vista

  (h) after the recording of the disc, and then run sfc/scannow to check the corruption of system files.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Check out TechNet help links and check if that helps:

  The computer starts stops at crcdisk.sys

  Help! Vista won't start... (crcdisk.sys)

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• change my Windows LIVE ID and now I can not connect to Games For Windows LIVE

  all games that support GFWL and I tried to connect it says: the e-mail address or password entered is not valid.

  I know that my email and password, but every time I try to connect, it gives me this error

  I tried to change my ID back, but it says that I have already changed my ID and I should try again later.

  Read this post and see if it helps. I know the live id and the gamerstags can be a bit confusing for some.

  http://social.answers.Microsoft.com/forums/en-us/vistagaming/thread/c0373c29-927E-45E6-9139-2f8a31cf7614/#e32dfd3c-F22B-458A-BF12-6f738940e28d

  MOS

• Administrator set the wrong password and now I can not connect.

  Original title: admin sign in help

  I have a funny feeling the person who assigned the administrator password typed in wrong because that what I thought was the password does not work and the only user on this computer is the administrator.  I can't get past the login screen. What should I do next?

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

• Upgrading from Windows XP to Windows Vista and now I can not find wifi or when I try to connect to the internet, I get an error, "a cable is not plugged on the network card.

  Wireless connections

  I upgraded my dell vostro laptop 1000 Windows xp to vista and now I can not find wifi or when I try to connect to the internet I get an error, "a cable is not plugged into the card network", "connection to the Local network. Everything worked fine until I upgraded. I noticed in my device manager, the driver for the system controller and core network are not installed. Could it be the problem? Is someone can you please help me understand this?

  Hello

  I noticed that you had created another similar to this question. Have you tried the steps suggested in this post?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/how-do-i-put-WiFi-back-on-my-PC-after-upgrading-to/c9b90ec1-8393-4B57-b4af-2fbeb802af58

  You can also try the following methods and check if it helps.

  Method 1:

  Update a network adapter driver.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Troubleshoot network adapter problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

• Updated Windows and now I can not run other programs on my PC

  Updated Windows and now I can not run other programs on my PC!  What can I do?

  Hello

  ·          Update you installed before the problem?

  ·          Do you have a code error message when you try to run any program?

  If the issue took place recently, you can perform a system restore that will repair return the computer to the point while it was working fine.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue. 2. in the System Restore dialog box, click on choose a different restore point and then click Next. 3. in the list of restore points, click a restore point created before you started having the problem, and then click Next. 4. click on finish.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help, I changed the password of root ESXi via powerCli, now I can not connect with the web client or the console.

  Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;

  SE connect-VIServer esxihostname-user root - password newpasswd

  This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain

  y at - it something I have left out. I really appreciate any assistance that you people can provide.

  Thank you, Joe

  It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is.  I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something.   If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).

  Edit:

  Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it.  In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access.  After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access.  I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.

• My printer was working and now it does not work.

  * Original title: printer not workin

  My printer was working and now it does not work I TURN my printer press the print icon on the subject and itgoes by movements as if it is printing, but paper comes out of the Virgin

  Hello

  OEM for the printer manufacturer is responsible for the proper functioning of the printer
  and their drivers. Check with the printer manufacturer's support, their online
  documentation and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  ================================================

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Solve printer problems (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Open the printer (Windows 7) Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Diagnose and automatically fix problems printing and printer (XP, Vista, Windows 7 &)
  https://support.Microsoft.com/en-us/mats/printing_problems?WA=wsignin1.0

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  -------------------------------------------------------------------

  Windows 8/8.1 - Fix printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Windows 8/8.1 - How to solve printing problems in Windows
  http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

  Windows 8/8.1 - install a printer
  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Windows 8/8.1 - set or change your default print
  http://Windows.Microsoft.com/en-us/Windows-8/set-change-your-default-printer

  Windows 8/8.1 - device drivers - print & drivers
  http://Windows.Microsoft.com/en-us/Windows/devices-drivers-help#hardware-drivers-help=Windows-8&V1H=win8tab3

  -------------------------------------------------------------------

  Windows 10 - Fix printer problems<- printer="">
  http://Windows.Microsoft.com/en-us/Windows-10/fix-printer-problems

  Supported Windows 10
  http://Windows.Microsoft.com/en-us/Windows-10/support

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• downloaded the trial version Microsoft Windows Small Business Server (SBS) 2011 Essentials to my laptop (Windows 7, IE 9) but now I can not understand how to open it

  (1) downloaded the evaluation version Microsoft Windows Small Business Server (SBS) 2011 Essentials to my laptop (Windows 7, IE 9) but now I can not understand how to open it

  (2) in addition, I want to assure you that I understand how the server works.  Is it just software?  No box to connect the computers up to?

  Hello

  The question you have posted is related to Small Business Server 2011. Please post your question in the Forums of Windows Small Business Server. Consult the following link:
  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver2011essentials/threads

  Hope this helps

• When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not it reboot. It says bootmgr missing. What should I do to restart?

  Can someone help me please! When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not restart. It says systeminst9.wnm is missing. What should I do I restart yo?

  Hi Ashutosh,

   
  You did changes to the computer before the show?
   
  This error indicates that the boot sector is corrupted or missing.
   
  I suggest for the link and follow the steps in the article:
  Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»
  http://support.Microsoft.com/kb/2622803
   
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• I had to reinstall my windows OS and now I can't connect to a wireless device, tells me that it cannot detect any wireless network hardware

  original title: Wireless help network device

  Help, please. I had to reinstall my windows OS and now I can't connect to my wireless device. When I try it tells me that it cannot detect any wireless network hardware. I am currently connected via my laptop air card. Please help me to find and correct the problem.

  Have you installed all of the correct drivers?

• After Encrypting files, I had to reinstall my windows and now I can not decrypt the file

  * O.T. > encrypted files

  So after encryption of files I had to reinstall my windows (changed the name of the owner) and now I can not decrypt the file

  After attempting to decrypt the files, I'm promped with this message:

  Attribute application error

  An error occurred applying attributes to the file:

  driveletter\filename

  Access is denied. \

  I want to say that I added my administrator name in the Security tab, and then gave me full control over the files, but that did not work.

  Hello

  I understand that you cannot decrypt files previously encrypted in Windows 7 after you have reinstalled Windows.

  • What program did you use to encrypt the files?

  From now on, I would ask you to refer to similar questions discussed in the thread below links and check the status.

  Cannot decrypt previously encrypted files

  I'm unable to decrypt files encrypted after reformatting the hard drive.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Updated the operating system on the server for Windows 2012. Now I can not connect to vcenter.

  Updated the operating system on the server for Windows 2012. Now I can not connect to vcenter.

  What version of vCenter Server do you run? Only of vCenter Server 5.0 Update 2 is currently supported on Windows 2012.

  André

• HELP: I was told to uninstall my photoshop cs2 and now I can not reinstall it - also cannot access my adobe account and it is the United States no. CS plus.

  Told me to uninstall my photoshop cs2. My macbook pro went repair and I had to restore from a backup, after which I got this error message when you try to use photoshop: a license for this product has stopped working: restart the computer and try new blah blah blah error code 150:30. I uninstalled stupidily program on the advice of someone in adobe CS in India and now I can't reinstall. Can someone help me please? I am not interested in buying a newer versioin of adobe cs photoshop or cloud or none of this. I'm pretty happy with it, I just want to come on my laptop. I also run on my desktop computer. Also, I couldn't access my original account due to be told that I had to change my password. An e-mail was sent to the e-mail address associated with this account, but I have more access to this email. I am VERY DISAPPOINTED WITH ADOBE AND THEIR SUPPORT MOSHE. We spend hundreds and it's the support that we receive?

  I oringinalyspent about $4-500 on this program and I would like someone to tell me how to get this back up and works without licensing issues and spend thousands more please. Agent original CS, I spoke with after waiting on hold for more than 1/2 hour was immediately rude to me and told me that I was tyring to understand something, when in reality he was not listening to a word I said to my questions. I am more disappointed, I'm DISGUSTED. I really wish I had not uninstalled it because I fear now, as I suspected, that I will never be able to get it back and I will be FORCED to spend more money. This is ridiculous. I wish I never sent my laptop for repair. I took them several days to understand this bulb and some cables have been damaged, and there is no real reason to wipe my computer everything. I wouldn't have to deal with all of this if I didn't have and that the original problem is still there, when I opened the laptop, screen out draft and it takes a minute or two to start the operation, but it is another matter.

  I tried to access the chat 24 hours again, but that doesn't work more or the other.

  Can someone help me please? Thank you!

  you have licensed ps cs4 mac and you have a way to find your serial number.

  If so, download an install the installation file.  If you already have the installation file, what is his name and the file extension?  (for example, whether it is a file, to use a dmg file).

  If you need the Setup file,

  Downloads available:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.6| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".