My pavilion G6 - 1210 SA goes in but the screen is not

Similar Questions

• After I publish my movie with windows maker movie at 03:00 in the video, the screen goes black, but the music is not yet how to fix this?

  After I publish my movie with windows maker movie at 03:00 in the video, the screen goes black, but the music is not yet how to fix this? all past images 03:00, but the video clips don't.

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  Solve problems with publishing a movie to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Make a movie in four simple steps

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-a-movie-in-four-simple-steps

• My iPhone my iPhone 5 guard by clicking on things at random, by clicking on the things im not clicking on and freeze momentarily. But the screen is not cracked

  My iPhone 5 guard by clicking on things at random, by clicking on the things im not clicking on and freeze momentarily. But the screen is not cracked

  You should go to the apple store and ask them to check it for you! You may have a faulty screen or faulty motherboard! in any case it is best to call or go to the apple store

• Equium A300D - 16 c turns on but the screen does not show anything / remains black

  Hi, I have a laptop Toshiba Equium A300D - 16 c.

  It was fine until now...

  When I press the power button, my laptop turns on but the screen remains black / off.
  The indicator disk HARD is not Flash or anything... (in case that helps)
  I also tried to remove the battery, hold the power button for 30 seconds and then reconnect the power cord... Same laptop turns on but the screen is black.

  I tried to connect my laptop to my PC using a HDMI cable screen, but without success... Laptop turned on but monitor my pc showed nothing.

  I have not changed anything inside my computer laptop or unscrewed it.

  PS:
  Quite often, I kept my laptop on the bed/pillow it may have something to do with overheating or something.

  How did I get to this point:

  Yesterday, my laptop was fine, there was nothing wrong with her... I turned off during the night, but when I tried to turn it on this morning it is where I have faced this problem.

  Any help would be appreciated.

  Thank you very much
  Rejanu.

  Long ago, I had similar problem on my old Satellite. CPU was faulty. After replacing the CPU, everything was OK again.
  I put t really know what to say.
  Maybe you should contact Toshiba and let check your laptop. They have diagnostic tools and may know what is the problem.

  What do you think?

• Re: Satellite A300-21I trying to start but the screen does not light upward

  I have a laptop Toshiba Satellite A300-21I 15.4-inch around the age of 2 months.
  He walks yesterday and received a message (very short)-initialization failed, see the event log.

  Laptop computer tries to start but the display does not illuminate.
  No prior problems.

  The indices of anyone?
  Stanley

  Hello

  You are able to access the BIOS?
  You see a Toshiba start screen that usually appears at the beginning?

  What happens if you press F8 at the beginning of the boot process?

  Please provide more details!

• Dell computer laptop starts but the screen does not light

  Hello

  I have a laptop Dell older (studio 1558) and when I used it the other day, 'static' filled monitor image and then the screen went completely black.  Now when I turn it on, it seems that the computer starts well but the screen is black.

  Get yourself an external monitor, easy solution, right? -bad.  Unfortunately when I plugged my laptop in a separate monitor, the monitor (which works fine) showed no images.

  Still, I had this laptop for a few years.  I see about being 'easy' opening and closing of the laptop.  This has been the case in recent years, however, so I don't know if something has finally given...

  I'm not the best computer savvy so sorry if I was not more detailed... any ideas, what is wrong and how do I fix?  I rather would not somewhere that make me fixed.

  You will probably get a better response if you re - post it in the forum of the laptop and mention the version of Windows, too. (This is the forum office.)

• Satellite L650 starts but the screen does not appear

  I turn on my laptop does not open the screen, but the computer is on, because I can hear the fan and the lights are all on.

  Help me!

  On this virtual path, it is not easy to say why this is happening. What did you do these days?
  Have you updated the BIOS?

• My iphone screen has gone completely blank. I can still talk to Siri via activation of the voice and the phone still makes a noise when I plug it into the charger, but the screen does not respond.

  white screen

  Try a forced reboot. Hold the home button and power at the same time until you see the Apple logo. About 20 seconds or more.

• try to install GEFORCE GTX650 in my HP Pavilion p6 - 2413 has but the display will not illuminate.

  Try to install the GEFORCE GTX650 in my HP Pavilion p6 - 2413a, I plugged everything in and the fan seems to work but the display does not illuminate.

  There is another cable with 2 multi 1 6 end plug but I can't work out where to connect.

  I tried to find it on youtube but can't see where he's going to help me please.

  Hello

  You need a greater power to support a PCI-E power connector 6 pin. Try a Corsair CX500, or CX600. The image below is that of a NVIDIA GTX 650 which shows where to connect the PCI-E 6-pin connector to the graphics card.  Most of the HP PC which have a greater power or 460 watt have they support for the PCI-E power connector 6-pin.

  

• I added third monitor display windows on it but the mouse is not going on the third screen

  I added third monitor display windows on it but the mouse is not going on the third screen

  Hello

  1. what operating system is installed on the computer?

  2. What is the brand and model of the computer?

  3. does the problem occur when you are working on a particular application?

  We will define the third monitor as primary monitor and check the functionality of the mouse.

  Link:

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=XT_Tjm0Ldrb

  Please return to the State of the question.

• G7-1070us Pavilion: laptop starts but the screen is intermittent

  laptop starts up ok and the display is available on the external monitor or a hdmi to the tv. turn top display backlight lights up but the screen is blank.

  Hello:
  
  Yes, it was what I thought. I do not understand how the same pilot worked as a temporary solution.
  
  Decide for yourself after you have identified the cause of the problem. If it's just a matter of cable, I think it's worth repair. Otherwise, I have no idea, maybe it'd cost you big.
  
  Give it to get it repaired in a good local computer shop.
  
  Concerning
  
  Visruth

• Speed dial installs, but the icon does not appear

  I used speed dial for a long time, both on my desktop and my laptop, and I really like it. Recently, I got a new office and installed the latest version of Firefox. Everything seems to be working well, but when I try to add Speed Dial, it appears to install correctly, but the icon does not appear in the menu bar. I tried several times and each time I like Speed Dial will be installed after I restarted Firefox. However, by clicking on the button will restart FF, but the icon never appears! What goes wrong, and how can I get Speed Dial to work for me, as it has always done?

  Dial manual > getting started - http://speeddial.uworks.net/gettingstarted.html (see paragraph beginning "when this extension is installed... »)

  • This is the same as the other buttons on the toolbar add - see: https://support.mozilla.org/en-US/kb/customize-firefox-controls-buttons-and-toolbars#w_how-do-i-customize-or-rearrange-toolbar-items

  Complete manual of dial - http://speeddial.uworks.net/manual.html

• 2000-2D02TU HP: HP 2000-2D02TU Power LED power switch but the laptop does not start.

  Someone help me.

  HP 2000-2D02TU Power LED power switch but the laptop does not start.

  What I'm doing.

  Please help me

  Model No. - HP 2000-2D02TU

  Hello @Alok_Bhai,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I read your post on the laptop won't start does not and wanted to help you!

  You indicate that the lights are flashing, but the laptop does not start?  If this is the case, try to review the following document and let me know how it goes:

  Computer does not start and emits a LED or beep Code

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• My laptop sees my Xbox 360, but the 360 will not connect to the top of the Tower

  I have a crossover ethernet cable

  I tried everything, but the 360 will not find the network,

  It saying that he "cannot obtain an IP address form the router or modem.

  Your router or modem can be automatically assigns an ip address, you can try a static IP address instead

  
  

  DHCP Server IP address form

  
  

  Help please

  
  

  
  

  Hey tons-of-pleasure-101.

  You can set a static IP address on the Xbox 360 by going to network settings and then manually enter an IP address.
   
  (1) type cmd in the start search field.

  (2) type ipconfig/all in this window, and then press the Enter key. This will display a lot of information.

  3) take down of the IP address, subnet mask, default gateway, and name servers. Be sure to note which is which.

  (4) type exit in this window, and then press the Enter key to close.

  (5) once more, open the start menu. This time, click on Control Panel.

  6) click view the status of network and tasks.

  (7) select the settings of map on the left side of your screen.

  (8) make a right click on your network adapter and choose Properties to open the properties of this internet connection window.

  9) click Protocol Internet Version 4 (TCP/IPv4), and then the properties button.

  Until you make changes, write down the settings you see on this page. If something is wrong you can always change the settings back to what they were! You should see a point in the obtain an IP address automatically box.

  (10) choose an IP address and type in the IP address box. The ip address that you choose should be very similar to the ip address of the router. Only the last number of the ip address must be different.

  (11) put the previously found in section mask subnet mask subnet. The default gateway should enter in the default gateway box. Enter the dns servers we prevoiusly found in the two zones on the DNS server. Completely out of this menu, click OK.

  That's all you should be done.

  Once done, you must assign a static ip address for your xbox as well.
  When you're done, between the two, the only parameter that must be different is the actual IP address. The gateway and subnet mask must be the same on your XBOX and PC LAN connection.

  Refer to this:

  Can not get an IP address from your router or modem
  http://support.Xbox.com/support/en/us/NXE/xboxlive/troubleshooting/NetworkHelp_dynip.aspx

  This should be it.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Envy 15 "touch screen power LED appears, but the fans does not and the screen does not light

  Hello!

  I'm a student in computer engineering at the University of Waterloo 1A, and I run a very serious problem with my HP Envy 15 "TouchSmart laptop computer running Windows 8.1. It is a problem that just started today, and I'd rather have a first support here before going to see the technical support Office sometimes tomorrow. It has to do with the screen and the fans where the Power LED lights in white, just as when the laptop works properly.

  (I have warranty on the laptop when it was purchased last June, except that if I find that I need to get a replacement, I'll lose all my work, I did on that since I started my semester.) It's so silly of me not to have all my work saved on a backup, because I have an external hard drive. Problem is, I've had too many problems in getting myself organized, I'm not being open-minded as I should, and worse, I'm not a balance between life and work at home.)

  Before I had my MATH 117 conference (Calculus 1 Engineering), I was in a nearby lab where my laptop was open and turned, works correctly. I've had NetBeans IDE running since I wanted to work on the second part of my current assignment of CS 137 (principles of programming). Because it was almost time for my presentation, I closed the laptop by simply moving the screen down on the keyboard, where it goes into mode 'sleep'. (Whenever I flip to the top of the screen, the laptop is supposed to return, and the sliding screen of Windows 8.1 connection will appear.)

  When I took my seat for reading, I wanted to spend a little time to work on my programming assignment. However, after the reversal of the screen to the top, instead of having the login screen appears, I encountered the problem: the power supply light is showing a white light, but I don't hear the fans between the ventilation openings on the left side of the laptop and the screen does not light. I tried to take the power for several seconds and once button at least 10 seconds, except that the power light continues to display on a white light. The Commission of the Wi - Fi light is not displayed.

  Whatever it is, I don't want to take out the battery because I have that on my last laptop, and it's from there that I couldn't turn to the former, a new market. If I leave the Envy laptop battery, it will short-circuit the connections between the battery and the computer, and so several components will FRY. For now, what I do let the laptop is to empty the load on the battery. Then, once I noticed that the power light does not project a white light, or plug in the AC adapter and try turning the laptop on the power button.

  It will take a little while for the circuit drain the load on my battery but...

  Anyway, please would you be kind enough to help me with this problem? I would really appreciate if you can give me several recommendations. Thank you!

  Hello @GregPDesWHP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is not on, and I'd be happy to help you in this case!

  In order to restore the features of your computer once more, I recommend you follow the steps described in this document on the computer does not (Windows 8). If the problem persists after having exhausted all the steps in this document, I recommend you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning