my PC doesn't detect NI PCI-5102
Hello guys, I had recently a Committee of NI PCI-5102 used scope,
I immediately install this Commission in an IBM Netvista 6792-24U PC.
(Details of the computer):
Intel Pentium 4 1.8 GHz (256KB), 256 MB, 40 GB 7200 RPM IDE HARD drive
Desktop PCI (4 x 4), nVidia Vanta 16 MB 4 X AGP, 48 x CD-ROM,
Intel 10/100 Ethernet, POV, Windows XP SP2)
But I don't know what the problem with it, because Windows XP does not work
detects new hardware, even I thought that something is wrong
with BIOS, but no, I've updated the BIOS with the latest version and
has got the same situation. Y at - it a step that I forget?, how can
whether the Council is good (not damaged).
Support team, NOR could you tell me what I can do?
Thanks in advance.
Hi IvanB!
There are several steps that you can do for troubleshooting:
1 - try swapping the PCI Slot on the same PC and check if the Device Manager detects the device as new hardware PCI, he won't tell a 5102 is cause you must have NI Scope installed.
2 - if it does not work on the same PC, try another and check if windows detects it and if it appears on the Device Manager.
3. - If it does not, your best option is to send the jury to OR so they can check if its dysfunction, for Mexico number is: 01800010793 for more information.
Hope this helps, another thing is that you can call your provider because it is a second-hand, he must answer in case this does not work.
Have a great day!
Tags: NI Products
Similar Questions
-
Device Manager doesn't detect external cd drive
My external LG DVD writer Super Multi play more on my Acer Aspire One. under Windows XP. He plays on a different computer, so I know it works very well. I used a flash drive on all the USB ports on the Acer so I know they work. I tried the disk drive on all USB ports, but did not work. Fix tried regedit "upper and lower filters" found on the internet - did not help. I tried Windows Quick Fix - did not help. He noted that some corrections have been made, but there will always be problems. It does not say what - the next button just to leave me with a window asking what they could do to help. (Stupid question). I reset to a previous set value - did not help. The LG say that they provide no drivers that all their products run on native Windows drivers. Acer technology referred me to people from Microsoft Windows. The LG player correctly purrs when it is plugged into the USB port and the glow of green light. I ensured that the player was clean (/ alcohol swab). The disc is clean. Once again, I have played the disc on the drive but attached to another computer and everything worked fine. I think that it is a driver problem. I read the forum messages that say when Windows sends updates that they often ruin the drivers and some people report that they continue to re - download drivers for their external players. Anyone know what to do about this situation? Thank you. -J.
Want to add that he won't play disk program or cd music disk.
Your post says "Device Manager doesn't detect external cd drive" if so you cannot change the driver if your devive is not listed in Device Manager. Try to connect to a powered hub.
-
PC doesn't DETECT XP during installation. Vista installation is fine.
PC doesn't DETECT XP during installation. Vista installation is fine.
Hello
I have a laptop that was previously installed on the xp machine. The system crashed and I tried to reinstall Xp home edition. But when I did that, he threw an error that it could not detect my hard drive. myinitial was that the hard drive had crashed, but the BIOS test he returned no errors. I tried vista on the machine and found that it functioned perfectly well. I trid re - install xp on the computer from the vista desktop, but it would throw into the same error after the re-start of the system. "Could not find hard disk..." Please advice...
ATTENTION: You can not wake XP if you do not have a real XP install disc. If you try to use a recovery disc that simply does not work. I assumed you had an installation disk XP at retail with a unique product key. The only way you can use the product key on the laptop for an XP installation is if you have a generic OEM installation disc with the same version of XP that what was initially installed on the laptop. Subsequently, you will need to install all the drivers and the specific portable software for this model. You will get these from HP website.
Again, a much better solution in your case is to buy someone or HP recovery discs as RestoreDisks.com. MS - MVP - Elephant Boy computers - don't panic!
-
does anyone know why my windows vista doesn't detect internet connection Wi - Fi?
my laptop doesn't detect wireless internet, but it allows to detect a wired connection.
Hello
- What were the changes made before the issue started?
The following articles might help you solve this problem.
Solve problems, find wireless networks
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows -
On another thread Microsoft Answers, I was advised to do an "inplace upgrade" to Vista to solve a problem I had with the opening of Word documents.
I followed the instructions but was unable to do the upgrade in place of Vista.
(The 'Upgrade' option has been blocked during the installation process. And there is no other choice available "Troubleshooting", even if the directions had mentioned that this could be an option. There is no workaround solution mentioned about how to proceed where it upgrade when the 'upgrade' option has been blackened.)
So, I did a clean install of Vista - after saving all my files on an external drive, of course.
This fixed the initial problem that I ask.
Now, however, I can't access the internet after you complete this process. I tried via wireless and services to broadband.
Reads the error message: "Windows doesn't detect any hardware networking."
How do I fix this?
Thanks in advance.
Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.
The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.
See you soon.
Mick Murphy - Microsoft partner
-
I install the drivers for OfficeJet J6450 on Windows 7 (64) and installation software doesn't detect USB connection. I recently had to upgrade Windows 7 in Place. The printer was working fine before the upgrade.
Hi shconner,
Looks like you need to uninstall what is already installed. Restart the computer and use the software features on the Web site to reinstall the printer.
-
Windows doesn't detect any network hardware... HELP Please
Hope someone can help me...
I have a HP Pavilion g6 and have been able to connect to the internet wirelessly with no problems. So far!
I have two user accounts on the laptop, Mine which is the main and also a guest account. I am able to connect to the internet and so post this message on my own account, but when I try the guest account which was also connected to the internet without any problem has now suddenly stopped working...
This message is displayed: Windows doesn't detect any hardware networking
but I can connect to the internet very well on my user but not on the other...
Any help?
Thank you
I highly recommend to disable the guest account.
You use a malware antivirus\anti product when you are connected to the internet?
Best regards
ERICO
-
Time Machine doesn't detect Time Capsule
Looking for advice on how to get the Time Machine utility for access to my Time Capsule. I use an iMac in late 2012 with MAC OS 10.12 TimeCapsule is 2015 7.7.7 running latest firmware. Airport utility is the latest firmware 6.3.7.
When I run the application Time Machine, Time Capsule is not detected. I tried the two WiFi and with cables connected Ethernet (not tried USB yet) and my Time Capsule doesn't have a lightning bolt or firewire ports.
Open Airport utility & see the airport time capsule. I can see all connected devices, including the MAC, but no prompt activation Time Machine on the Time Capsule.
I recently used TM on this iMac with a G-Technology drive. It auto detects the time machine and executes a back up. But airport Time Capsule will not.
Any suggestions?
We understand your current configuration of the network with the Time Capsule (TC). Is the TC the only router on your network? What is the brand and model of the modem Internet you have directly linked it by Ethernet?
Normally you use a wired connection or wireless between the iMac and the TC? This always was a problem or just started to happen? If she just started, have you changed any software/firmware on the iMac or TC?
-
iPod nano 6th will does not detect my sport kit sensor. What can I do?
A nano gen 6 doesn't have Bluetooth integrated as the 7th gen nano. You need the Bluetooth receiver that connects to the dock connector. It's the white thing that you see next to the sensor
http://www.CNET.com/products/Nike-Plus-iPod-Sport-Kit/
You have the receiver AND the sensor? With a 7th gen nano, you need just the sensor that goes on your shoe. With the previous iPod nano models, you also need the receiver.
-
Want x 360 m6-w103dx: x 360 SSD doesn't detect not envy
Hello
I am having trouble with my wanting to x 360 (m6-w103dx). I like it a lot so far and decided he needed a nudge, so I took a BX100 Crucial SSD 250 GB, I had and clone the HARD disk provided with the laptop for the SSD. Immediately at startup, the said laptop drive smart status has an end/failing (which doesn't seem right, others PC, I tried the SSD on do not display the same things, and this morning the SSD worked perfectly well as an old PC boot drive)
After that, the laptop would say "Boot device not found, please install an operating system on your hard drive" (3F0).
Then I thought, well, maybe I missed the HARD drive cloning. I plugged the SSD drive in my office and it wiped and prepared a Windows 10 USB Installer. While I was doing this, I also put the disk HARD original in the laptop to check it was working again properly and the laptop started fine just like before.
I handed the SSD wiped/cleaned in the laptop. I always get the status message smart of the player at the start, and "peripheral to boot not found please install an operating system on your hard drive" (3F0). So looks like, I just need to install windows...
plugged in the win 10 USB stick and set bios to start USB first. After that 10 Windows install came as she normally does, but it has not detected disks. I'm stuck enough at this point. I tried cloning, wiping the drive and its initialization in the MBR and again, wiping and try TPG and tried to place the laptop boot 'Legacy.
Edit1:
Now I got an old 500 GB of HARD drive in the laptop just to see if it would detect it - he did and started in an old installation of windows 7 immediately. Plugged the SSD drive in my office, which it has detected no problem and installed windows on this 10.
Edit2:
Don't put my 80 GB SSD desktop in the laptop and it starts windows 7 no problem... This drive is too small for what I want on my laptop, so always try to get the 250 GB boot BX100 Crucial on the laptop. I install the software SSD Crucial to look SMART on the disc and crucial details says he is in good health, so I have no idea why the laptop says something quite different and also can not detect it correctly.
Any help would be appreciated.Well, I finally have a working laptop. I hope this will help someone who has ever faced a similar problem.
I did an erase secure for both the SSD and Crucial 100 BX Adata SP550. Delete everything on the drive and it repartitioning in Windows was not enough, he had to be a deletion secure difficulty regardless of the failed clone caused.
The Crucial drive still showed mistakes SMART boot up - that must mean it's really a firmware mismatch.
However, it has - Data showed once again! Windows is installed with success so now I have to deal with getting the drivers for the laptop. It was dissapointing the Crucial drive was not compatible, but I'll find a use for it.
-
System->; DevNames DAQmx detects not PCI-5105
Hi all
I use the property system/DevNames DAQmx node to remove all the hardware connected to the system and to dynamically assign device names to measures/controls s/w. This property node has worked well up until now - when I then added a PCI-5105 (digitizer).
I understand that this use the niSCOPE IVI instrument driver when you write Labview code and perhaps this has something to do with the problem, but my understanding was that if the Measurement & Automation explore displays the device and name under the directory under devices and peripheral Interfaces/NOR-DAQmx then this property node needs to pick it up. (IE NI PCI-6255: "Dev1" or NI PCI-5105: 'Dev3, etc...)
Is there a way where I can automatically detect the device name? Or is the problem, because its use IVI and requires a class IVI to define?
Would be happy for some advice!
Hi Barkusmaximus,
In fact, you can use the scope OR api to detect devices connected to your system. The VI under NI Scope > utility > ModInst will detect and display the details of the device. See the VI attached for an example.
-
MAX Dosen´t detects my PCI GPIB
Hi guys, I am currently using Windows xp sp2 and labview 8.6 adcademic there must be and interface for an instrument for school and my problem is:
In MAX dosen't appear my PCI (keiithley provider) of KPCI - 488 A card, until my computer hardware, it seems I have alreadry installed the latest driver from keithley page and still does not appear = /, I tried refreshing, fresh installation etc... nothing worked... could someone help me please... tnx guys... xD!
As mentioned, this device will not appear in NOR-MAX because it is NOT material. And no, you NEITHER-488. 2 driver will not work either. You must use the GPIB-488 driver (version 9.0 or 9.1 should work for you). Once installed, use the tools of 488 GPIB software on your system, as follows:
To see if the device works properly first confirm the presence of the jury and then to test its ability to comminicate with an instrument the driver alone and then with NI-VISA:
1. first check that the KPCI - 488 A is detected by the driver. Run the program Start-> all programs-> GPIB - 488-> diagnosis GPIB. This should confirm if the IPP is recognized or not. If this isn't the case, reinstall the pilot or the pcb.
2. then, connect an instrument with gpib and attempt to communicate with the driver: Start-> all programs-> GPIB - 488-> TRTEST.exe (use the buttons send and Enter to test writing and reading respectively). If this fails, check your cable connection and make sure that you use the correct address for the instrument number.
3. If it works, then you can you can try to communicate with the instrument using NI Visa Interactive Control on your system (start-> all programs-> National Instruments-> VISA-> Visa Interactive Control), you can also open it and check if your instrument is listed under the VISA i/o tab. If your device is not listed, then recheck your connections and also your passports VISA.
To check the VISA Paassports, open the utility OR Measurement & Automation (NI Max) and click on software-> NI-VISA, go to VISA-Options tab, click on passports and ensure that the passport of NI-VISA for the GPIB is marked on.
4. now you are ready to use LabVIEW. You can start with a simple reading GPIB and GPIB write or read visa and Visa write before moving on to complex things.
Best regards.
-
Computer does not detect the pci card
Hello
I have a dell dimension 4550 pc, with windows xp professional service pack 3.I connect to a card its pci in one of the pci slots empty of the motherboard, but when I start the computer the system does not detect the new card.
What can I do to make the computer detect the new card?
Thank you
It is not clear what part to uninstall the drivers and install the good? So what if Windows installs the drivers? Uninstall them, do not restart and install the good. MS - MVP - Elephant Boy computers - don't panic!
-
Hello
I'm looking for the following drivers who disappeared after I reinstalled Windows 7 on my 6-1010sa desire:
Network controller:
PCI\VEN_8086 & dev_0887 & subsys_40628086 & rev_c4
PCI\VEN_8086 & dev_0887 & subsys_40628086
PCI\VEN_8086 & dev_0887 & CC_028000
PCI\VEN_8086 & dev_0887 & CC_0280
Ethernet controller:
pci\ven_10ec & dev_8168 & subsys_1896103c & rev_0a
pci\ven_10ec & dev_8168 & subsys_1896103c
pci\ven_10ec & dev_8168 & cc_020000
pci\ven_10ec & dev_8168 & cc_0200
PCI device:
pci\ven_10ec & dev_5289 & subsys_1896103c & rev_01
pci\ven_10ec & dev_5289 & subsys_1896103c
pci\ven_10ec & dev_5289 & cc_ff0000
pci\ven_10ec & dev_5289 & cc_ff00
Thank you very much
Hello:
You need these drivers...
This package contains the Intel wireless drivers and Intel PROSet for Wireless LAN cards Intel (see supported devices) in the notebook models that are running a supported operating system. Intel PROSet includes Intel "My WiFi" feature.
File name: sp57090.exe
This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.
File name: sp56726.exe
This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.
File name: sp56725.exe
-
my HP Pavilion dv6-3108ea cd-rom drive doesn't detect any dvd or cd help please!
My CD-ROM drive can't detect CD or DVD. I used the "fix it" tool from microsoft, and it detects that the driver is out of date, or it needs to be updated. I tried to uninstall the driver via the Panel control and restrating my laptop settings to see if it will reinstall the driver automatically but it still fails.
Does anyone have any suggestions? I would be very grateful.
Hello:
You can try to change the registry.
http://www.ehow.com/how_4927228_use-registry-fix-DVD-drive.html
Paul
Maybe you are looking for
-
Program for caching disk ssd Y580
Currently I have my OS installed on my 32 GB SSD - drive on the lenovo y580. Recently, I discovered that I shouldn't have installed here, but the HARD drive disk and use the SSD to cache. What program should I use for caching because Y580 is not supp
-
How can I cerate a table with a set of numbers saying 1 to 12 random order but no recurrence.
How can I cerate a table with a set of numbers saying 1 to 12 random order but no recurrence. I know it should be easy, but my brain doesn't work right now
-
At first my computer intel was blocked in a reboot loop, then just the black screen with cursor. I could never establish safe mode! I don't have a recovery partition.
-
Download pirated Windows XP Media Center with the genuine key?
Hi all First of all, I apologize if the thread, I created is in the wrong place (Technet forums), but I got enough good help from technet on a Windows 7 problem, that I had. I've recently updated to the Genuine Windows XP Media Center to a genuine Wi
-
Problems with burning DVD in DVD Maker
I made a movie of pictures, added music, added entertainment, got my move perfect BUT when I try to burn it in DVD Maker, my problems start... I hit burn and my photo of some jump to the top out of sequence of the film, play a second time, but when I