My PC freezes and meets more regularly
original title: FREEZING AND SEVERAL error REPORTS
"My PC freezes and meets more regularly. In some cases, internet Explorer tells
me, what clossing because it has encountered a problem. I used microsoft
FixIt with no. benefit and downloaded scanner from microsoft, but without any help.
What version of AVG? Take a look at these instructions to disable the AVG e-mail analysis to see if that helps:
http://www.VCN.com/Knowledgebase/article.php?id=436
Now, you bring another question (external hard drive). Eliminates the go of freezing, etc. If you unplug the drive? I am aware that there were problems with the WD external drives.
Tags: Windows
Similar Questions
-
Hi, well bad get right to it. I have a dell studio XPS 1340 and have recently upgraded to Windows 7 last week. everything was fine until last Monday. When I switched high performance mode for my battery, my nVidia card also goes to Boost Performance. but this time, I got a blue screen with this:
nvlddmkm.sys
PAGE_FAULT_IN_NONPAGED_AREA
Since then I tried to update the video driver from the dell site and even the nVidiasite. one of them gives me a blue screen as soon as I get to the windows login screen. and the other divides my GeForce 9500 M into its two parts > GF 9400 MG + GF 9200 AMS. When this happens, I can't use the nvidia Control Panel and I can't go to boost performance. I have uninstalled and installed these drivers in safe mode too, but no luck. I system restored before the weekend, when everything was fine, but still the same problem. so now, I have the driver 8.15.11.8633 version
other side effects I've noticed is that Skype does not work either. When I first upgraded to win 7, Skype has worked well. but now, when I run a video or normal call, my computer completely freezes. In addition, the games I play seem to decrease in performance. I used to be able to play very good Burnout Paradise, but now there is a significant drop in fps. also, the computer seems to use more cpu and heats more quickly. The battery life has decreased too. and when I use windows media center to connect with my xbox360, my phone freezes when I try to access a video.
I tried the diagnostics start and the only problem was:
Error code: 0F00:133 media suitible C Msg:No drive is present
and today, I used the windows debugger and it came with it. im sure this is good information, but I don't know how interperate it. Please help and thanks in advance!
Microsoft (R) Windows debug 6.11.0001.404 AMD64 Version
Copyright (c) Microsoft Corporation. All rights reserved.Loading dump file [C:\Windows\Minidump\111409-21434-01.dmp]
The mini kernel dump file: only registers and the trace of the stack are availableSymbol search path is: SRV * c:\debug_symbols* http://msdl.microsoft.com/download/symbols
Executable search path is:
The kernel version of Windows 7 7600 SQUARE free x 64
Product: WinNt, suite: TerminalServer personal TerminalServer
By: 7600.16385.amd64fre.win7_rtm.090713 - 1255
Computer name:
Kernel base = 0xfffff800 '02e0d000 PsLoadedModuleList = 0xfffff800' 0304ae50
The debugging session: 11:03:52.777 sat 14 Nov 2009 (GMT-5)
System Uptime: 0 days 1:03:33.572
Loading the kernel symbols
...............................................................
................................................................
.......................................
Loading user symbols
Loading unloaded module list
.......
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************Use! analyze - v to obtain detailed debugging information.
Bugcheck 50, {fffff88007000000, 0, fffff880047d5b1e, 0}
Cannot load the image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, 0n2 error Win32
WARNING: Unable to verify timestamp for nvlddmkm.sys
ERROR: Module load completed but symbols can be loaded for nvlddmkm.sysCould not read the name of the problem driver
Probably caused by: nvlddmkm.sys (nvlddmkm + 135b1e)Follow-up: MachineOwner
---------KD >! analyze - v
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
It must be protected by a probe. In general, the address is simple bad or it
pointing to freed memory.
Arguments:
Arg1: fffff88007000000, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff880047d5b1e, if not zero, the address of the instruction that refers to bad memory
address.
Arg4: 0000000000000000, (reserved)Debugging information:
------------------Could not read the name of the problem driver
READ_ADDRESS: fffff88007000000
FAULTING_IP:
nvlddmkm + 135b1e
fffff880'047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4]MM_INTERNAL_CODE: 0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0 X 50
Nom_processus: System
CURRENT_IRQL: 0
TRAP_FRAME: fffff88009d7fdf0-(.trap 0xfffff88009d7fdf0)
NOTE: The frame trap does contain not all registers.
Some registry values can be set to zero or incorrect.
Rax = fffff88007000000 rbx = 0000000000000000 rcx = 0000000000000000
RDX = fffffa80057a7270 rsi = 0000000000000000 rdi = 0000000000000000
RIP = fffff880047d5b1e rsp = fffff88009d7ff88 rbp = 0000000000000000
R8 = 0000000000000000 r9 = 0000000000000000 r10 = 0000000000000003
R11 = fffffa80057a7298 r12 = 0000000000000000 r13 = 0000000000000000
R14 = 0000000000000000 r15 = 0000000000000000
iopl = 0 nv up ei pl zr po nc
nvlddmkm + 0x135b1e:
fffff880 '047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4] ds:5110:fffff880' 07000000 =?
Reset the default scopeLAST_CONTROL_TRANSFER: from fffff80002efe1e4 to fffff80002e7ef00
STACK_TEXT:
"fffff880 '09d7fc88 fffff800' 02efe1e4: 00000000'00000050 fffff880 ' 07000000 00000000 00000000' fffff880 ' 09d7fdf0: nt! KeBugCheckEx
fffff880 '09d7fc90 fffff800' 02e7cfee: fffff880 00000000'00000000 00000000'00000000 00000000'00000000 ' 047d60b0: nt! : FNODOBFM: 'chain' + 0 x 42907
fffff880 '09d7fdf0 fffff880' 047d5b1e: fffff880'04824f5e fffff880'04 c 72260 00000000'00000000 00000000'00000001: nt! KiPageFault + 0x16e
fffff880 '09d7ff88 fffff880' 04824f5e: fffff880'04 c 72260 00000000'00000000 00000000'00000001 00000000'00000000: nvlddmkm + 0x135b1e
fffff880'09d7ff90 fffff880'04 c 72260: fffffa80 00000000'00000000 00000000'00000001 00000000'00000000 ' 04ef9000: nvlddmkm + 0x184f5e
fffff880 '09d7ff98 00000000' 00000000: 00000000'00000001 00000000'00000000 fffffa80 '04ef9000 fffffa80' 057a 7270: nvlddmkm + 0x5d2260STACK_COMMAND: kb
FOLLOWUP_IP:
nvlddmkm + 135b1e
fffff880'047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4]SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: nvlddmkm + 135b1e
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nvlddmkm
Nom_image: nvlddmkm.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4a4fbef6
FAILURE_BUCKET_ID: X64_0x50_nvlddmkm + 135b1e
BUCKET_ID: X64_0x50_nvlddmkm + 135b1e
Follow-up: MachineOwner
Hi anchit02,
Thanks for posting.
The page fault has a high probability to be RAM or hard drive related.
You can test the computer memory using the memory diagnostic tool.
You can start the memory Diag tool by clicking the ORB start and type 'Memory diagnostic tool' in the search box, clicking on the entry that is displayed.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hi guys. I have a MacBook Pro 13 "mid-2012.
I worked that hard, but a few months ago, it began to freeze and restart.
In addition, when it restarts, it makes a beep 3. I have check the Apple website and it says that this noise indicates a RAM problem, but they don't say how to resolve this problem.
I already changed the RAM, but the problem has not disappeared.
When it freezes, the screem like that look.
Please, someone help me. I don't know what to do anymore.
You have a problem with graphics. It is more likely to be caused by a problem with the graphics chip. It can be caused by memory graphic problems, but those usually produce crisp, clear the scratches or repetitive patterns regularly on the screen. You have crazy stuff indicative of chips badly programmed or chip failure, only to RAM.
an Intel graphics HD 4000 '' integrated '' Graphics that shares system memory
This description of everyman.com indicates that the graphics memory is the main memory exactly.
If at least part of your problem can be caused caused by bad RAM memory.
The three beeps are an indicator of memory problems. The beeps passed away when you changed the memory?
"Change your memory" usually does not count for much except if you bought the modules from a seller who knows Macs and can tell:
"it works in your Mac
(or your money back! »
Many other vendors have no idea what they're selling. There are many stories about those forum users who now have replacement modules perfectly although it can't work on their Macs.
--------
In the United States, when you have a serious problem like this, you should make an appointment at the Genius Bar for an assessment. This visit is FREE, regardless of your warranty status.
Outside the United States, political change, and a visit to an Apple authorized Service provider may incur a nominal sum.
-
Toshiba 40L5450EA freezes and does not respond to remote control
First of all, I want to tell you that I have a very good experience with the Toshiba products.
But unfortunately I just bought the new toshiba android TV Toshiba Egypt 40L5450EA (El Araby Group) last week and I am facing a very stupid problem that when I turn on my TV, it works but freezes and there is no response from the remote control and Panel and I can not turn off again.
Instead, I have to unplug the power supply cord and return again and so that it works correctly.
Is this normal and acceptable?
Thanks in advance, but I need a urgent clarificationAs already mentioned in the monograph: this model is designed for the Middle East market as it works with Android (there is no EU with this platform models).
For more assistance, contact your reseller or Toshiba. -
Satellite U305-S7432 freezes and does not sometimes using Win XP
Hello.
I have a portable Satellite U305-S7432.
Initially, it came with Vista, but I reformatted with XP Pro. I have installed all updates up to service pack 3.My problem is that sometimes when I try to restart the computer, simply, it freezes and does not meet any entry. I noticed that this happens if I close and then open the cover (which means that the computer goes mode sleep entry and returns).
Please note that the splash screen works perfectly well and the computer wakes from sleep fine but then when I try to restart, the computer will simply spend time instead of restart.
If it goes into sleep mode, reboot takes place as planned.
I installed all the drivers and there is no question mark in Device Manager. I've updated the latest chipset from Intel (for the mobile 965) driver as well. Finally, I also tried to add /forceresetreg my Boot.ini file (as suggested: http://support.microsoft.com/kb/822624) but nothing helps.
Any ideas?
It is a series of laptop computers Toshiba us and you should check the Toshiba driver page for available drivers:
http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jspIf you will not find XP drivers for this page, then you can try to install unique drivers for Sat U300 since European Toshiba page but I not quite sure if these drivers XP will work on you Sat U305 Mr. but it s worth a try!
Good luck
-
Skype on Microsoft Lumia 535 freezes and stutters
Hello dear Microsoft,
I'm really happy with my 535 Lumia from Microsoft. Great phone, great price.
Skype however (which is the preferred application) really bad though behaves.
It freezes and stutters all the time.
For example, to open the application, it takes very long. To see my recent contacts takes another 30 seconds or more. To type a message to a contact takes another 30 seconds and while typing, it freezes and stutters once again.
Performance sucks, basically.
We soon expect an update? This is a really bad situation, where Skype on other platforms of works like a charm, but Ms mobile platform, just sucks...
I hope that this is resolved very, very soon!
Kind regards
Schoustra Koffeman
Hello
After I used the Windows Phone recovery tool (link):
http://www.windowsphone.com/en-us/how-to/wp8/phones-and-hardware/recover-my-phone
) and restored my phone, Skype works without any problem.
You should know that you do a backup of your data and your settings if you use this tool.
Good luck
TR.
-
Satellite A100-225 keeps freezing and crashing with the new HARD drive
Hi all
I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.
I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.
I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?
Thank you
Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.I can't say for sure, but there must be a compatibility problem.
Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.
Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.
-
Hello
My PC # is G42-490TU, product model # LR783PA #ACJ, processor - Intel Core (TM) i3 CPU M370.
RAM: 2.00 GB (1.86 GB usable), System Type: 32-bit operating system.
My PC is running very slowly lately. It crashes, freezes, pages become insensitive and therefore, it takes a lot of time typing. I use every day for work so, I want to solve this problem as soon as possible.
I would like to increase his speed to be able to work smoothly every day. Want PC to run fast.
Pls suggest faster, easier and less expensive to fix this.
How to increase the RAM? It cost to increase the RAM?
Also, reading the messages of prev I downloaded this link - http://www.intel.com/support/graphics/sb/CS-009245.htmto determine the chipset info and following is what I got. Pls know me if increase the RAM to 4 GB will solve my system is making him run fast and do leads not to any crashes / freezes etc.
How to increase the RAM?
Pls answer soon!
I'm waiting for your response forwarfd.
Thank you best regards &,.
Isha
Hi @HPIsha
I understand that you have performance problems with your laptop (speed, gels, etc.). I'm happy to help you with this.
I'd take a glance on the following pages; There will be an overlap between them, but each is useful.
Some software Applications may cause Windows to start or run slowly
Windows 7 stops responding or becomes very slow after you connect to the Internet
Set the performance of the slow system (Windows 7)
It is possible that it could also be a hardware problem, but it is most likely too much software, loading or running in the background and thus more taxing your processor. These pages can help with this and other common causes such as malware and other cousins of software.
Try these first, because these solutions are free. When it comes to hardware such as memory upgrades, you need to get the memory to do the upgrade, and it must be of the correct type to be usable.
You can check this link for the Service Manual: Compaq Presario CQ42 Notebook PC and PC portable HP G42 - Maintenance and Service of Guide. In it, you will see the type and compatible variety.
I hope this helps.
-
the mouse freezes and bumps all the time
I have my mouse and it freezes in place and bumps, it almost constantly. Help
I finally found a solution for the mouse freeze problem which has been a pain in the A * because I bought the wireless mouse and used with my Windows 7 laptop. Try it to see if it works for me.THE MOUSE FREEZE PROBLEM SOLVED! (HOPE THIS HELPS)
>>Mouse freeze problem is more likely to be linked to the USB SUSPEND MODE as most mice now use the USB port to connect the blow in.>>You can try this out. It works for me.>>Go inselect >>According to what plan of power, you are 'Balance' or 'Power Saver', select theaccordingly >>Selectand expand <+USB settings="">by clicking the <+>sign >>Enlarge it <+USB selective="" suspend="" setting="">by clicking on the <+>sign>>Set both& on "Disabled" and click 'Apply' >>GEL MOUSE (SUSPEND) PROBLEM HAS DISAPPEARED FOR ME!>>Hope it will be useful.>>See you soon,.>>cybersam999>> -
I have upgraded to windows xp pro did all updates, and when he places classified sp2 it restarts fine then when I loged on more updates to update it freezes and reboots, when she will recover no codes or anything be it what could be the problem...
Hello
1 is it only during the use of the internet?
Method 1.
a. click on start and then right-click my computer.
b. click Properties.
c. click on the Advanced tab and then click settings under Startup and recovery.
d. under system failure, click to clear automatically restart it the box.
e. click OK, and then click OK.
f. try to reproduce the error message.
Method 2.
Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
a. refer to the article below for the procedure safe mode in Windows XP
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222b. you need to perform a clean boot to find the program that is causing and then disable or remove.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353/en-us
Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.Also I would ask you to update all the drivers of material from the manufacturer's Web site.
I hope this helps.
-
computer freezes and goes to power saving mode
Several times a day my computer freezes and goes into the power saving mode.
Hello1. have you made changes on the computer recently?
2. do you use a particular application when your computer crashes?
Method 1.
Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
Step a. refer to the article below for the procedure safe mode in Windows XP
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222Step b. You need to perform a clean boot to find the program that is causing and then disable or remove.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353/en-us
Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.
Method 2.
Also, check the logs of the observer eveny for recent activity on your computer and check.
This article describes how to use Event Viewer to view and manage the event logs in Microsoft Windows XP.
Procedure to view and manage event logs in Event Viewer in Windows XP
http://support.Microsoft.com/kb/308427I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
My mouse cursor freezes and I have to reboot for it to release
original title: frozen
My mouse cursor freezes and I have to restart for his release, when I click to go back a page or click on the x to close the page, it won't work, I have to keep clicking on it and then finally it will go ahead and work, it also as the page is too frozen. Also when I type, the letters don't just type, they released the letters wrong or when I type, the letters will go out to a lot of the same quick true letter and I try to go back to clear them and sometimes it stops to type the letters when I'm a backspace to erase the letters, it's strange.
Hello
Make sure that all of the mouse and/or the keyboard drivers are up to date, if no 3rd party driver is used.
--------------------
Use the startup clean and other methods to try to determine the cause and correct the problem.
--------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
-
Whenever I try to delete a file or display a folder, explorer.exe keeps freezing and crashing.
Hello
Whenever I try to delete a file or display a folder, explorer.exe keeps freezing and crashing. I tried SFC/scannow, and he found that he could not repair the corrupted files. I also tried to use a boot disk to fix my OS, but he said he had "no problems found".Please answer as soon as POSSIBLE. Thank you.Use chkdsk /f and sfc/scannow and reboot several times.
Sometimes it takes more pases.
-
laptop slow, freezes and "unresponsive".
Hi my laptop with Vista home premium, is very slow, continually freeze and "does not" to the point where it is almost impossible to use. I followed responses to similar issues dealt with on this forum and have run the sfc/scannow in cmd. It made me know that there was corrupt or damaged files, but when I try to analyze the entries in log file the program Checker (SFC.exe) Microsoft Windows resources, I am informed, I don't have permission to open the newspapers, regardless of how I try to "administrator." This mean the end of this pc?
Hello
Many files that SFC cannot resolve are not important.
Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN
put the command from below (copy and paste) in this box and her and then press ENTER.
findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt
who creates the sfcdetails.txt file in the folder that you are in when you run it.
So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
in Windows Vista
http://support.Microsoft.com/kb/928228This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
here. NOTE: there are probably duplicates so please only post once each section error.You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
(You may need to search sfcdetails.txt if it is not created in the default folders.)===============================================================
Use the startup clean and other methods to try to determine the cause of and eliminate
the questions.---------------------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
Original title: OS time questions continuum (microfeezes)
It seems that my computer freezes for a split second every 3 seconds approximately. My cursor disappears for a split second, and because the clock freezes and restarts, it displays a worst time of the day. Audio and video have the same gel splitsecond. The problem persists in safe mode. Dell Inspiron 1520, servicepack2 of vista running. I've never had any problems with this machine. Here's a video I took of the number: http://youtu.be/fbUeK8U7wHw
I would like to know if there is other info/specifications that could be useful.
Thank you.
Good,
1:
Updated the chipset drivers even though it said I was with the best.2:
Run a SFC scan, which revealed no violations of integrity or files not repaired.3:
five hours and 8 infected files later, my computer is totally cleaned.I opened the event viewer, but I don't know what I'm supposed to be looking for. There are many changes to the machine because it began to act up, which were intended to correct the problem. I installed the Service Pack 1, then 2, scan MS Safety and new chipset.
I also ran a memory diagnostic, but all was well.
What should I look for in the event viewer? I know that the problem started in a 12 hour window. Should I save and post the logs at the time?
There is a certain mystery. We need Sherlock Holmes.
-UPDATE
I have reset the system to its factory settings. Now, it's as if it were new.
The problem persists. He still hiccupping. It freezes again for a few milliseconds about once per second. And I'm going crazy.
UPDATE 2-
The computer was closed for about 12 hours and when it restarted and Windows initialization complete, the problem disappeared. It works normally for a vintage computer 2007. I'll let you know if I learn more.
Maybe you are looking for
-
Is the current version of Firefox Compatible with Windows 10
Windows 10 due for release July 29, Firefox will be compatible
-
How to get Vista 64 Bit from Toshiba Qosmio F50 - 10K-
Hello A few days ago, I bought Qosmio F50 - 10 K but with Vista Ultimate 32 Bit.It does not satisfy meDoes anyone know how to get Vista Ultimate 64 Bit from Toshiba? This version has been developed for the Poland, but in this country there is no offi
-
spellcheck stop working on my email. only french dictionary now
How can I replace the dictionary on my office 2007 Microsoft Word spell check to work on my msn. Messaging.
-
How can I get rid of the part of the home page of windows xp pro?
A friend built my computer. I gave him my window xp pro and office xp pro disc to load. He came back to me with something first page added to windows and office. Nothing works well. My friend is no longer in the city. How can I get rid of the first p
-
HP 15-r033 tx: USB, bluetooth, communication controller drivers bus controllers simple pci