My PC starts immediately after stopping off for a considerable time

Similar Questions

• Why did after downloading Windows security updates that Windows Firewall starts immediately after opening?

  Why did after downloading Windows security updates that Windows Firewall starts immediately after the connection?   This is happening with my PC and netbook, I almost hesitate to download the safety of dates in the future

  Hello

  1. What is the security update article?
  2. are there any other security software installed on your computer?

  If you have any third-party security software installed on your computer, I suggest you to disable the security software and then check if it helps.

  Note : If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  See also:

  The firewall service Windows in Windows XP Service Pack 2, in the edition of Windows XP Professional x 64, Windows Server 2003 SP1 and x 64 of Windows Server 2003 versions may not start if the DCOM Process Launcher Service is disabled: http://support.microsoft.com/kb/892504

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users: http://support.microsoft.com/kb/875357

• U2415, artifacts monitor after power off for a period of time. Solved by allowing the DP1.2

  U2415 - artifacts monitor after power off for a period of time

  I'm running Win 8 Pro 64 bit, Asus GTX 760. Connected to the U2415 using the miniDP to DP cable.

  It is: after turning off my monitor for a period of time (PC fixed IT), 2 hours or more, after turning it back on, I see lines on the screen.

  I will need to restart the PC for it to be back to normal.

  It will not happen if I turned OFF the monitor for a short period. Only when I turned OFF for a few hours.

  Any ideas? Thank you.

  I downloaded a video on Dropbox. I had it turned on after turning off for about 3 hours.

  [See:www.dropbox.com/.../U2415.mp4]

  Hi Chris, just an update.

  A local forumer had discovered how to solve.

  It was the scene of DP1.2. By default, it is set to "Disable". After that I put to 'Activate' and test it for 2 days, everything seems fine now.

  Hopefully someone will find this useful.

  Thanks Chris.

• shows am improve ready system me ready start Hello, after installing "Setup for the windows modules" my pc one slowed down at the start. That do I do? Thank you.

  Hello, after installing "Setup for windows modules" my pc one slowed down at the start. That do I do? Thank you.

  Hello Turkish styleozdemir.

  The forum in which you've posted is for English only. Please select your language by clicking on the globe on the page down to the left to post your question in the language of your choice. If you can't find the desired below language, support for additional international sites options are by following the link below:
  http://support.Microsoft.com/common/international.aspx
  Thank you!

• After Effects - Download for the first time and keeps crashing

  Hello! I bought my CC plan earlier and download after effects CC with the hope to apply the blur filter of Pixel movement in a project. The problem is, since the first time I opened the app, it crashes a lot. I can't use any filter it crashes, so I try to make something, it crashes if I keep for a long time in the application, it crashes. I don't know what can do and I'm a bit desperate. Know you guys something I can do? Thank you very much!

  MacBook Pro (13-inch, mid-2012)

  2.9 GHz Intel Core i7

  8 GB 1600 MHz DDR3

  Intel HD Graphics 4000 1024 MB

  

  According to the crash message, check your Quicktime and Audio settings in the respective system control panel.

  Mylenium

• Dell xps 13 restarts immediately after stopping down

  Hey,.
  I bought my new dell xps 13 a month ago to Microsoft online store and had with 10 Windows.
  From the first moments, the laptop won't stop. If I try to stop it, it will stop down and a millisecond after it restarts already.

  I checked devices (USB, tuchped etc.) for power management options does not allow them to turn on the computer and also checked for differences in integrity and found nothing.

  What could be?

  Thank you

  Shahar

  This has been a problem of knowing for a while... Do not know if he is connected to W10 or Dell...

  Temp solution: press and hold the power button until the computer turns off completely. Wait 1 min and then turn it back on (important to wait at least 1 minute).

  Long-term (!) solution is to transform the hibernation that is made in advance for your power management settings. The standard is '180 min', set to 0.

• How to stop the monitor go black after no activity for a short time during the reading of a document?

  When I read an email or document without moving my mouse, the screen turns black after only about a minute and then proceeds to my screensaver.  I have to move the mouse constantly opening my active window.  I can't find out how to disable this "Energy Saving" so I can read the lengthy articles without being interrupted every other minute.  This was VERY irritating!

  Hello

  Open windows control panel, open personalization, click on the link to screensaver at the bottom right and in the next window, set the time in the area of 'Wait' for once you want before the screen saver appears, and click on apply. Or if you never get the logon screen, remove the check mark next to of "on resume, display the login page»  Click on apply to save the changes.

  Then open windows control panel again and click on Power Options, click Change plan settings next to your current power plan selected in the next window, set the time using the drop-down list next to "Turn wide Display" to a more acceptable level and then click on save changes.

  Note:  Set in the Options menu of food to be slightly longer than the time set in the Menu of the screen saver or you will never see your screen saver start.

  Kind regards

  DP - K

  

• Speed Grade crashes on start immediately after each time.

  There is not even for a second. no time to start a project or import a film. It crashes without fail after starting upwards. Have not been able to do one thing with this program because it will not stay running.

  All my other programs CS6 run great. First, After Effects, Audition, etc all smoothly.

  Motherboard Asus X 79 Pro

  CPU i7 3930 K

  64 GB of Ram

  GTX 580

  MUSHKIN Chronos Deluxe SSD boot drive

  MUSHKIN Chronos Deluxe SSD for the Disk Cache

  24 TB raid array.

  Windows 7 64 bit

  All my other software Adobe is stable. Don't remember even when the last crash was on a program of CS6 except fo Grade speed which I couldn't use.

  Is there something not compatible on my computer? He just doesn't have accounts for me. The crash is instantaneous at startup. Of course I tried to reinstall

  firmware Central drivers etc. ran updater adobe etc. Tested the Ram for problems that takes a long time to 64 GB.  5 passes all the memory sticks, with a hitch.

  I you send an email.

  _

  Duy Anh

• After being off for ten days, MBP is going very slowly

  Hi all

  During the festive period, that I have done any work on computer and since then it is very slow and jerky when I opened a window, for example, get a black screen where the new window opens for a brief second.

  I also see the wheel that rotates a lot.

  I have the battery it also says replacement needs but its says that since about 2 years but I'm on 700 cycles.

  It is a MCP 13 "mid 2010, 8 GB RAM and 1 TB SSD.

  What do you make of all that?

  Stelios

  stylianous wrote:

  Hi all

  During the festive period, that I have done any work on computer and since then it is very slow and jerky when I opened a window, for example, get a black screen where the new window opens for a brief second.

  I also see the wheel that rotates a lot.

  I have the battery it also says replacement needs but its says that since about 2 years but I'm on 700 cycles.

  It is a MCP 13 "mid 2010, 8 GB RAM and 1 TB SSD.

  What do you make of all that?

  Stelios

  It may be that really need the new battery - or the battery that keeps the date and time.

• My HP HDX 18 1200 has a cooling fan make noise at startup after being off for the night.

  I don't have any document that shows how to open the unit and change the fan.  If the folder is available please either post the pdf or send them to me please.

  Can I change the fan, that I built PC for 20 years.

  Hello

  You can try to look at this document.  It's maintenance and repair for the HDX 18 series, it is not listed under manuals for your model, so it is perhaps not entirely accurate, but it should be close, since this one is listed for earlier versions of the HDX 18 series.

  R

• Problems with outgoing mail / STMP server after has worked for a LONG time...

  Recently I started having trouble with sending an outgoing message. Beyond out lickety split with no problem. Now, once I click on SEND, I get window to send the Message reading "status: connected to stmp.primus.ca...» "but the progress bar continues just to go and go and... rather than a telling me the message has been sent."

  Sometimes the email finally gets sent, after taking in "shipping time E-mail" what's FOREVER, sometimes by that email is not to all and I get the message "send message failed. The message could not be sent using SMTP server smtp.primus.ca for some unknown reason. Check your SMTP server settings are correct and try again or contact your network administrator. »

  I looked in my SMTP settings and noticed that, in aid of Primus, he said the outgoing server port is 465 while mine has been implemented (and worked for ever) 25. I have also noticed that help Primus said connectivity should be set to SSL/TLS, while that mine has been set (and has worked forever) to zero. I made these changes (first simply by changing the port #, then both) but this does not solve the problem.

  I've recently updated Thunderbird to 31.7.0 and I think that these questions CAN coincide with this update, but I am not sure of the time. If this is the case, is it possible that I could get back to the old version of Thunderbird... or move in this way another? ID of the update was not the questions, someone has an idea or an idea on why this would suddenly be a problem with Thunderbird?

  Or should I contact Primus technical support and try to sort it out with them?

  Thanks a lot for listening.

  Your anti virus got an update. We get a rash of these every time updates to Thunderbird. The cause is always an anti virus program. usually, Norton or Alvira, but they all get a mention.

• Help! I am trying to download After Effects test for the first time, but nothing happens!

  When I try to download the trial version or whatever it is on the page of adobe it brings me to a blank page and nothing happens. What should I do?

  Hi maple,

  try to download creative Cloud Dekstop applications and run it, you can install after effect here.

  concerning

  Deto

• Fan start after stopping

  The fan in my office starts immediately after the stop and the only way I can stop it is to hold down the power button for several seconds.  I checked the BIOS is updated.  I don't know what to try now.  Can anyone help?

  Sure! BIOS stands for Basic Input Output System. It's very low level software that controls the hardware, outside of Windows. You can do things in the BIOS as change the order of starting, say, if you want to load an operating system from a DVD or USB. In some versions of BIOS, there is an option to change the settings of the General fan.

  You can find your current version of BIOS by

  1. click on the Start button

  2 type 'System Info' and then click on system information

  3. look on the right side, halfway. You will see ' Version of the BIOS/Date '.

  4. If the version number is less than 6.12, download the latest version from the link below.

  BIOS version 6.12

  After some research, it seems that it is perhaps a motherboard problem or a power supply problem or a combination of both. If you don't have additional power supply of the same power laying around, you could take it to a local repair shop where they will have a power supply Tester and an additional power supply to swap with tests.

• Do not start after having been arrested in the menu "alt + f4" in win7 64 bit for the first time

  I always stop the laptop from the start menu. But now when I stopped it for the first time by the "alt + f4" - menu, it does not restart. Or rather, it starts, but looks like the HARD disc spins down after a second or two, and he did not get past the first screen of boot of Lenovo. I can hit the ESC key to see the detailed (with RAM-tests and other) boot screen, but then nothing happens. I can't go in the BIOS or boot menu. And it does not start on a dvd of Win7. Any ideas?

  Sorry, apparently, that was my (Corsair F-Series 90 GB) SSD that suddenly broke down. I'm back to Corsair.

  Problem solved I guess.

• Mouse and UI Lag, be ground immediately after turning on the computer for the first time.

  Hello

  I started using Windows 7 yesterday for the first time after using Windows XP since its release.  A couple of things, first off I noticed lag and be ground everywhere instead travel windows autour mouse, move the mouse on the screen, etc.  It will just freeze and jump around, is not no good whatsoever.  I have a wireless optical mouse Logitech, maybe this has something to do with it, because I tried to install the software for the mouse, and I got a weird error and something not to be in the right place (very annoying).  Nobody knows why, I'll have this lag?  It's really annoying and never happened in Windows XP.  Any ideas on how to possibly resolve this problem?  Thank you very much.

  Justin

  Programmer for Sony Online Entertainment.

  Try to use another mouse, or by downloading the new firmware drivers/mouse from Logitech for your current mouse.  Have you noticed the behavior if you start in safe mode?  Or if you perform a clean boot?