my pc will not allow the quick change of user using four accounts, if I try, I get a message saying - log on error - there is not enough storage available to process this command - I'm on a stand-alone pc

Similar Questions

• Error 0 x 80070718 not enough quota available to process this command to rename photos

  Original title: Hello... I am having trouble renamining my photo files & get error message

  error message 0 x 80070718 not enough quota available to process this command, all hot to fix ideas?

  Hello

  Follow the link below and check if that helps.

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

• Move (or copy) files__Error GRAND 0x8007046A: insufficient server memory is available to process this command

  error 0x8007046A: insufficient server memory is available to process this command on BOTH Vista and XP, when you try to move LARGE (> 100 GB) files from drive 1 to external drive connected locally

  Currently trying to use robocopy and changed the

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer
  50 to 12 \Parameters

  WHY is happening.  GREAT video becomes more common, this will become a growing problem?

  E-mail address is removed from the privacy *.

  Just got "insufficient system resources to complete the service requested, using robocopy on my xp machine.

  This becomes a very serious problem that I have almost 200 GB tied up on my local disk in two files that I need to get away!

  Help!

  Boblevy,

  I had this problem with the Western Digital external drives in the past. There is an article on this specific error found here:
  http://support.Microsoft.com/?scid=kb;en-us;177078

  It refers to the same registry key that you mentioned above. You mention that you are changing the key; If it helped?

  This may be caused by your antivirus and it may be interesting to try this copy even in Mode safe and then further identify the issue with a clean boot:

  Method 1: Put the computer in safe mode and see if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: Clean boot

  If the problem is not repeated in safe mode, there is probably a startup item or service is causing the problem. Follow the steps on the following link to locate the item or service responsible for the error:

  http://support.Microsoft.com/kb/929135

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Three computers networked fine then suddenly the error message «...» Contact the administrator of this server to find out if you have access permissions. Not enough server storage is available to process this command. "

  I had a network that worked very well with three 2 computers running Windows XP Professional and Windows XP Home Edition 1. Suddenly, the network has just stopped allowing certain communications giving the above error message (I have another thread address with XP to Vista computers). The main computer with XP Pro, I'll call A, the second computer with XP Pro, I'll call B and third with XP Home will be C. All computers can share files and printers then without any changes to the system that occurred the following:

  A can access the documents and printers on B and C

  B may NOT have access to documents or printers on one, but access to documents and printers on C

  C cannot have access to the documents on one, but CAN access A printer and CAN access the documents and printers on B

  When access is denied error message is displayed:
  "\\A\My documents is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Not enough server storage is available to process this command. "(\\A\ being the computer that I am trying to access)

  As I said access from all computers on this network was working fine a week ago and there has been absolutely no changes made to the network. I checked the following

  1. workgroup name on all computers are the same
  2. file and printer sharing are enabled for all computers.
  3. all computers may been from each computers just denied in some cases.

  The firewall that runs on all three machines is AVG and there were no changes to the one last week, but I checked that sharing is allowed.

  I even tried to run the Configuration Wizard from the network on all computers to see if it works, but the same exact problems occur after doing this.

  I met this problem now THREE times. I can't believe that I'm the only one who has this problem and I can't believe that there isn't a solution for it. None of the Microsoft documentation has even a hint of a solution for this specific problem.

  I need a solution that closes completely the network at my church, and they cannot afford to buy printers and others for each of their computers.

  This error message is misleading. See article Knowledge Base Microsoft Antivirus software may Cause Event ID 2011 for a likely solution, specifying a value of IRPStackSize 15 on A computer.
  Boulder computer Maven
  Most Microsoft Valuable Professional

• Desktop\SharedDocs is not accessible. You are not allowed to use this network resource. Not enough server storage is available to process this command.

  \\XXXDesktop\SharedDocs is not accessible. You are not allowed to use this network resource. Contact the administrator of this server to find out if you have the permission to access. Not enough server storage is available to process this command.
  I got the above message when I tried to access my room servert pc (XP Pro with Service Pack 3) from another pc Client (XP Home Edition with service pack 3) on a network share. I see all class document & readers who share in my network places on both PCs.
  There is no problem when I have access to XP Home Edition of XP Pro. I heard the pc installed with Acronis True Image to give to this question. But my two PCs are installed with it. Any solution.
  What I've tried so far on my pc (XP Pro):
  1. click on start, run, type regedit, and then click OK.
  2. Locate and double-click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
  3. on the right side, double-click restrictanonymous setting.
  4. make sure that that the value in the value data box is set to 0, and then click OK_ (why the default value is 0. I change it to 1, but always the same)
  5. close the registry editor.
  6. restart the computer.
  I also tried to enable the allow anonymous enumeration of SAM accounts and shares on XP Pro (default value is Disable).
  File and printer sharing exception is enabled in firewall. Don't have a firewall part 3

  The two guest account are capable of Simple file sharing in XP Pro box checked also checked.

  Hello

  Please visit the following link.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/three-computers-networked-fine-then-suddenly-the/3976b554-bb9c-4920-881f-38eb64480ca7

• Error when you try to connect to a shared network drive by car on the portable XP from VISTA desktop: "not enough server storage is available to process this command."

  Hello
  I was able to connect ok in a shared folder on my laptop VISTA from my XP desktop computer.
  but when I try the other way around (to connect to a shared drive on my desktop XP FROM my VISTA laptop), I get the following error message:

  "The mapped network drive could not be created because the following error occurred: not enough server storage is available to process this command."

  Desktop is HP Pavilion a1410n
  Windows XP SP3 Home Professional 3 GB RAM
  Laptop is HP dv5z
  Windows Vista Edition Home Premium SP2 4 GB RAM

  I would like suggestions.
  Thank you very much.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Steve,

  Thanks a lot for the link to this article.
  It was most helpful.

  I also found this forum useful post:
  http://www.techsupportforum.com/Networking-Forum/networking-support/114373-cant-map-new-network-drive.html

  In particular, he said to check the event log of the computer that you are trying to connect to (the remote computer) to search for an event ID 2011, which would be entered in the time you finally tried to connect and does not.
  I did alt-click on the icon MY COMPUTER (from the remote computer) and the menu HANDLE, click the EVENT VIEWER folder (in the left pane), and then the SYSTEM folder under that.
  On the right pane, I found an ad for the event ID 2011 at the time wherever I finally tried to connect.

  To test this, I went to the VISTA laptop and tried to connect the computer to Office XP again, which gives a different error message on the VISTA laptop.
  When I went back on the XP desktop I tried to connect to and looked again to the event log, of course ANOTHER event ID 2011 has been registered with the new time of my additional attempt to connect.

  He confirmed that it was likely that the IRPStackSize was the problem, as your proposed article.

  Then I printed article how DO TO SAVE AND RESTORE the REGISTER to: http://support.microsoft.com/kb/322756/
  then backed up the registry (both by running a restore system to register and by exporting from the top level of the regedit).

  I then went in regedit on the desktop in XP for the
  HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\SERVICES\LANMANSERVER\Parameters file described in your article.
  There was NOT an entry for IRPStackSize in the right pane, so I followed the instructions in the add - it and change it to decimal 15.
  I rebooted and tried to connect but still got the same error.
  The article said that the default value is 15, so I assumed that adding input IRPStackSize to 15 has not changed anything.

  So I went into regedit and changed the value of IRPStackSize of 15 to 18, restarted and it solved the problem.

  I found that the following articles is also useful in the resolution of this problem (aside from the one you gave):

  http://support.Microsoft.com/kb/285089

  http://www.smartcomputing.com/editorial/article.asp?article=articles/archive/r0803/10r03/10r03.asp

  I typed this all this while this might help others who may encounter this same
  Error "not enough server storage is available to process this command" when you try to
  Map a network drive (or just try to connect) to a XP computer from another computer.

  Thanks much for the lead.

• Error Msg: "not enough server memory is available to process this command" tries to open the network when the folder shared

  Hello.  I did some of my files of Windows XP Dell system accessible on my home wireless network.  When I try to open the folder (which appears in the network folder) on my Sony Vaio with Windows Vista, I get the error msg that I have stated above in the title of this Post.

  The entire message starts like:

  \\DOUG-DELL1\Denises at the bottom of the folder is not accessible. You could

  are not allowed to use this network resource.  Contact the

  Administrator of this server to find out if you have the permission to access

  "not enough server storage is available to process this command" tries to open the network when the folder shared.

  I have a bitmap and a Jpeg screenshot captures showing the specific error message as well as the objects on my network - is possible I can join to this post?

  This error message is misleading. See article Knowledge Base Microsoft Antivirus software may Cause Event ID 2011 for a likely solution, specifying a value of IRPStackSize 15 on the Windows XP computer. Boulder computer Maven
  Most Microsoft Valuable Professional

• try to install KB942288, get - message "not enough memory is available to process this command."

  KB942288 installation, get message "not enough memory is available to process this command."

  What storage speak?

  See...

  Windows Vista Help: Strategies to free up disk space
  http://Windows.Microsoft.com/en-us/Windows-Vista/strategies-for-freeing-disk-space

  Then...

  Open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  Vista Service Pack 1 (SP1) or SP2 installed?

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• XP logon message... system couldn't open session... not enough memory is available to process this command.

  Windows XP has just received the last update.  If a user is logged on cannot pass between users because when do you a pop up and States opening message... "" the system could not log due to the following error: not enough memory is available to process this command "."

  -Have concerts and gigs of free hard disk space
  -Currently 2 GB RAM
  -He just started this
  -The system does not allow more than 1 user at a time to log in now
  -If you try to connect more than 1 user, it displays the error message and cannot connect again, even not the original user, you must restart the system.

  So what's happening?  Is it a mind foopah the latest patch XP?  Why can't connect more than 1 user on?  I used to be able to connect the whole family and switch between users!

  Remove your antivirus (Norton, Bitdefender 2010, etc.) and try to connect again.  It should work.  Then download Microsoft Security essential Microsoft and you shoul be ok.

  Vitin

• Download "not enough memory is available to process this command." When installing umdf.exe

  Hello, I tried to configure this file umdf.exe

  but this error pops up: "not enough memory is available to process this command." "The installation did not complete.
  There is a lot of memory and disk space
  So could someone tell me what to do?

  Hello

  Follow these steps to get the fixed number.

  First copy umdf.exe of "wmp11-windowsxp - x 86 - enu.exe" on your desktop, two methods:

  (a) decompress wmp11-windowsxp - x 86 - enu.exe (ex: with TotalCommander-> Alt + F9) and copy umdf.exe on your desktop

  (b) run the wmp11-windowsxp - x 86 - enu.exe (if you run it will extract the folder folder)
         
  Click Start-> Run-> %Temp% [ENTER]
  Press F3, and then search for "umdf.exe".
  Copy this file to your desktop
  Cancel the installation of WMP11
   
  Rename the following files, it just copy & paste into your command prompt:

  Rename C:\WINDOWS\system32\drivers\wudfrd.sys test_wudfrd.sys
  Rename C:\WINDOWS\system32\drivers\wudfpf.sys test_wudfpf.sys
  Rename C:\WINDOWS\system32\wudfhost.exe test_wudfhost.exe
  Rename C:\WINDOWS\system32\wudfsvc.dll test_wudfsvc.dll
  Rename C:\WINDOWS\system32\wudfx.dll test_wudfx.dll
  Rename C:\WINDOWS\system32\wudfplatform.dll test_wudfplatform.dll
  Rename C:\WINDOWS\system32\wudfcoinstaller.dll test_wudfcoinstaller.dll [ENTER]

  Now run the umdf.exe and reinstall it. After that is finished, connect your phone and your MTP problem is solved.

  Bravo!
  Santosh Narayan

• nlsdl.amd64.exe error 'not enough memory is available to process this command. "

  Hello

  Recently, I was introduced to the multilingual support for use in my applications. I went to microsofts site to learn the tutorial here, but when I install the Microsoft National Language Support API 1.0 returned then try to install the nlsdl.amd64.exe installation package, it gives me an error "not enough memory is available to process this command."

  I increased the IRPStackSize to 15 (0xF) and restarted just in case where. Tried to install it again. The same problem. One thing I noticed and tried to delete was my external storage drive that acts as a RAM drive as the first time I tried to install this that he actually unzipped in external hard drive instead. Do not change.

  What can I do to solve this problem and continue on this tutorial?

  Here's what I'm working with on professional W7 X 64.

  Add the Support of Board multilingual user in an Application

  Microsoft National Language Support returned APIs 1.0

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Including error 'not enough memory is available to process this command "?

  I downloaded the Xinput for Microsoft Common Controller (64-bit) driver, so I could plug my Xbox 360 wired guitar on my computer. When I ran the program I got a message error that says "not enough memory is available to process this command", followed by another that says "installation did not complete. So I checked the C: drive, thinking it was kind of full, but he had 129 GB free. No idea why this didn't happen and how am I supposed to install it now?

  Hello

  What is the brand and model of the computer?

  I suggest you to clear temporary folders and check if it helps, here are the steps:

  a. Click Start, type % temp % in the start search box and press on enter.

  b. press the ctrl key and A, which will select all content, and then delete.

  Once you disable this, follow these steps:

  a. Click Start, click computer.

  b. open the C drive, go to the Temp folder and delete all the content and check if it helps.

  I also suggest you to download and save the Xinput for Microsoft Common Controller (64-bit) driver from the link below on the computer:
  http://www.microsoft.com/downloads/details.aspx?FamilyID=d6289d8d-2478-4bf1-984c-56ffb828ba4e&displaylang=en&Hash=HQBo8olwQYkDM%2bRImauH7TXbbEwUfLeDhQ2lrUQS2fJcvO2FOgsBL0MKLTzmUwGwRodDBWY5s%2fKpKaOV%2bNuhcQ%3d%3d

• Error: Not enough memory is available to process this command

  On one of our servers running Windows 2003 SP1, CFMX 6.1 (6,1,0,83762) we get the following about every other day.
  "Not enough memory is available to process this command." The message only appears on one of the .cfm pages and other .cfm pages are stillaccessable. We have more than 2 GB of available disk space and 1 GB of RAM so I don't think that either of those who are the problem. In order to solve the problem, I just stop/restart CF and then everything works OK. The only thing I know that has changed with the server in recent weeks, it is that the following MS Patches have been installed: MS06-013, MS06-014 and MS06-015.
  
  Is anyone of another experincing the problem and if so, what is the solution. I realize that I could always uninstall patches, but wanted to know if there is another solution before that.
  
  Thank you

  It seems that my problem was related to client variables fills the register. Once I cleaned out the registry usigng the following technical note variables the application worked fine.

  http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=tn_17881

  I also installed a client patch for variables.

  http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=b3a939ce, "Hot".
  fix for client variables (Article 19590). »

• Windows Server 2008 32 bit - "not enough server storage is available to process this command."

  My operating system is Windows Server 2008 32-bit. When I install SQL Server 2008, system throws me error.

  "Not enough server storage is available to process this command."

  Free space in my drive C is 195 GB.

  Even I checked upward with IRStackSize, and is to have a value of 50. I still get the same error.

  Kindly guide me to solve this issue.

  Concerning
  Hitesh Parsawala

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• What should I do to get rid of a "Printing cancelled win32 error: not enough memory available to process the command.

  What should I do to get rid of a "Printing cancelled win32 error: not enough memory available to process the command.

  Hi Jerome,

  ·         You receive the error when you try to print?

  If so, check to see if the following helps you.

  Run the next Fixit tool to check the issue.

  Problems printing and printing errors

  If this isn't what you are looking for then respond with more information so that we can help you best.