my phone became a brick.

Similar Questions

• January 1, 1970 my phone is now 'bricks' Will Apple difficulty / replace it!

  I was deceived by assigning the date of my phone January 1st, 1970 due to see post on twitter saying he would give me a new theme. Now that I Googled, I realize the gravity of the situation. My phone will not start, and it's because of a sort of loophole, I created by setting the time on that date. I am really panicking, I have no idea what to do, I only just got my phone fixed! Apple will replace my phone? Will I have to pay? Can it be fixed?

  Try to put the phone into DFU mode:

  http://www.payetteforward.com/how-to-put-iPhone-DFU-mode/

  If it does not, make an appointment at the Genius Bar at your local Apple store.

• T400 became a brick after bios update

  Update ThinkVantage told me that I had a bios update to do, last night, I started & went to bed. Full battery, plugged in, etc.

  This morning, I went down to my home office and attempted to 'wake up' the laptop, it was totally insensitive. Since he was about 8 1/2 hours to do the upgrade, I unplugged and jumped the battery to reset. When I went to restart, I got 3 beeps (1 long and 2 short).

  BRICK!

  Warranty expired last October (could not extend), now Lenovo tells me that I have to pay for the repair, could be up to $500 for a problem caused by the update of Lenovo.

  I read a post where you can put the CD bootable on a USB key & reflash the bios image, but maybe the USB is not bootable because I understand not anywhere with this method.

  Someone at - it ideas? I did the thing the cmos battery, but who did nothing else but a chance to blow the dust off the DIMMs.

  Any constructive help appreciated. Thank you

  I was contacted by Lenovo, and they're going to do a repair for my device.

  THE BEST CUSTOMER SERVICE in THE WORLD and I say this as a satisfied customer of IBM/Lenovo for more than 10 years and more than 10 machines.

• My torch for blackBerry Smartphones became a brick? Help.

  I have an AT & T 9800 I unlocked and use on T-Mobile and last week Thursday July 7, I've updated being two Xobni address book applications, the other was Twitter for BlackBerry v2.0.0.16. When my flashlight restarted after downloading the two apps screen basically everything went black and the red light was then the phone started to reboot again from the beginning. I don't have a day to the new os 6.0.0.600 so I know not who has nothing to do with it, but it's weird that on the eve of this os was released my torch has stopped working. I tried to pull the battery on a million times and leave for a day, then try to start it, now I've been leaving the phone plugged into a power source and just running and constently through the restart process, but never turn on completely.

  I've tried everything I can think of and I tried to erase the device through my BlackBerry Protect using my BlackBerry ID application, but it can not connect to my device. I can't seem to get hold of someone at AT & T who can help me, anyone know any options at all for this problem. Thank you.

  Mark, I'm sorry to hear about your device problems!

  First of all, let's see if we can get your BONES removed from the device by using an application called BBSAK, you can get here.  That que telecharger download on your PC, then plug your device and launch the app BBSAK.  I hope that BBSAK will recognize your device and we will be able to erase the OS so you can recharge.

  If it does not, this method, although a bit outdated, has been used successfully many times.  Takes some patience, but it works.

• After the update, my macbook air became a brick)

  So, the problem is that my MacBook Air has stopped working, have downloaded the latest update with FileVault (I saw him first in my life, and I don't know what it is the program, because my Macbook after download disabled or broken, I was really confused). Now, I see it on my screen (a circle with a line) and it does not work, can someone explain this sh.t?

  Screen of Mac OS X - grey or prohibitory sign appears during startup

  If it was not a machine or failure SSD, try this:

  Clean Install of El Capitan on a new disc

  1. Restart the computer. Immediately after the chime, press Command + Option + R until a globe appears.
  2. The Utility Menu appears in 5 to 20 minutes. Be patient.
  3. Select disk utility, then click on the continue button.
  4. When loading disk utility, select the drive (generally, the entry Out-bumpy) in the list aside.
  5. Click the Partition tab in the main window of disk utility. A panel will fall.
  6. Set the GUID partition scheme.
  7. Define the type of Format Mac OS extended (journaled).
  8. Click on the apply button, then click the fact when it is active.
  9. Quit disk utility and re-enter the Utility Menu.
  10. Select reinstall OS X and click on the continue button.

  This should install it the version of Mac OS X that has been previously installed when the computer was new.

  [Permission to use any part of the foregoing has been granted by khati, exclusively, to theratter.]

• Win 10 overview steam 8 became a brick

  The latest version of win 10, preview generation 10041, on my Stream 8. The installation seems to work very well until the final reset. When it came, it was just in rear flashing between the office and the splash screen. I let this for about 10 minutes and finally propelled it works.

  Now, it is used to show a picture of a river flowing through a forest and it won't go beyond this screen. Turning power on and off several times will give the same result, no matter how long it sits. No gestures or taps won't do anything.

  Performing a power on reset (button + volume down / stop) gives the screen to choose the restore options, but by pressing the F11 key takes no action. After a few seconds an error screen appears saying:

  Your PC needs to be repaired

  A required device is not connected or is not accessible.

  error 0xc000000f

  Press the Windows key

  The Windows key is not recognized as anything other that the screen goes blank after a few seconds.

  Repeat the same results, but some other Fnn keys do not work:

  F1 - work information system

  F2 - system diagnostic work

  F9 - Devide Boot options - no work

  F10 - BIOS Setup - has not changed the settings

  F11 - translated by above error

  Currently, 10 of Windows is not yet supported on 8 Stream. Try to return your device to Win 8.1 using system recovery (low-flying + button / stop). If the recovery partition is deleted due to win 10 update, you must bring your unit to service center to get back to the previous operating system.

• are iOS 7.1 and itunes 12.2.2 - compatible?

  I just updated my iPad iOS 9.1.

  My computer won't let me not synchronize with iTunes because I'm under 12.0.1.26 and must at least 12.2.2.

  My question is...

  I have an iPhone 4 running iOS 7.1 s.  I decided it's not iOS update, since I've had a lot of friends who have had their phone became useless bricks when they have updated iOS.

  Can I update my iTunes to 12.2.2 and always sync my iPhone running iOS 7.1?

  Thank you

  Wendy

  Yes.

  (136636)

• Watch is now no paired phone. The watch displays now wrong password, which must be changed on the phone.  However, given that the watch is more matched with the phone, I can't the available option to change the password.  Help please!

  I have a watch that has become not matched with the iPhone with it's Setup.  It is locked with a password and the dial of the watch indicates "Wrong password" and I have to open the App to Apple Watch on my phone to re - activate the entry of access code and try again.  However, the iphone has stated that on the phone became not paired with the watch, so I can't do anything, there is no option to change the password and I can't pair the watch with the phone because it is locked.  This is my boss's phone... Help, please!

  If you have forgotten the password for your Apple Watch - Apple...

  < edited by hosts >

• Plays strange things in my phone

  Hi guys,.

  I already have an iphone5 using the last 3 years, last weekend I bought an Iphone5s more.

  I took the backup from your old phone in my laptop then loaded the backup into the new phone using the same apple account.

  Now my concern is when all incoming calls in mobile from there is also an another phone starts ringing.

  The two phone has different different operator sim. And vice versa for the other phones.

  If the call comes on the new phone also old phone starts ringing.

  It's like the two phone became replicas of each other. I can answer any of the phone.

  
  

  If the call is coming in numbers1, telephone2 also starts to ring and I can answer the call of telephone2 who actually comes from numbers1
  

  
  

  Can someone explain to me why it's happening?
  

  
  

  Another Point, I would like to add that I did factory restore the old phone.

• HELP: Phone won't turn on, completely insensitive

  My Moto X (XT1058) has been fully charged and plugged.

  When you use the Chrome browser, the screen went all black (as if I hit the power button), but the phone became completely unresponsive. No button or combinations of Chargers/cables anything.

  I tried:

  -Different Chargers and cables for the minutes and hours (but the phone was fully charged), no loading screens

  -Plug on laptop, no recognition

  -All FLIGHT and PWR key combinations for up to 3 minutes

  Any other suggestions? or I am the GROUND?

  Thank you

  Chris

  Well, after a few days of using my old Nexus S, I decided that the only chance to fix my phone would be to bite the bullet and get a new one. So yesterday, I picked up a used Moto X off kijiji for $100.
  
  Before that I got the money, I tried to turn on the old phone one last time... Nothing.
  
  Reloaded the new phone from the day to the next, and while he was starting this morning, I decided to try the phone again for s & g's, JUST held the power button for about 5 seconds and... LIFE! Starts perfectly, not 'optimization applications' or whatever it is, battery fully charged and no sign of what anyone ever be wrong.

  So now I have two 2013 x bike!

  In case someone has similar problems in the future, after the first day of load with different Chargers and based on each unique combination of button, he had sat the charger for two whole days before finally deciding to start normally.

• BlackBerry Smartphones Brick Breaker

  How to reinstall the bricks. I know this has been asked before but I tried the fixes and none does not work for me. When I open the desktop software, I only get Applications and not App Uploader. All of this shows me it's the apps that I have on the circuit breaker of the phone and not brick. It of a phone of the company and has all kinds of object on him, but he came with brick breaker installed.

  All ideas welcome.

  Download it's

  Here:

  Brick Breaker

  http://mybbota.com/download/4620

• Cannot activate windows 7 - accepted not Legit "Application not found" license key

  I have an old Alienware m17x R1 with a copy of Windows 7 Home Premium Service Pack 1 installed. I bought it for the birthday of my son out of craigslist in July 2012. He had so many things about it I not rub and the operating system was already authorized, enabled and recognized as legitimate.

  Yet once the operating system has already been verified as legitimate and fully active and I used Windows Update and Windows Security Essentials broadly I have prepared the machine for her birthday and there is no problem.
  In any case, in mid-2012 October my son suddenly begin to see updates cautioned that "this copy of Windows is not genuine" and he needs to activate it. So, not having contact with the person that I bought the computer from, I advanced and bought a copy of Windows 7 Home Premium for $220.00 rather than download and online Microsoft store online and wipe the machine and re - install (us Mac people never have to deal with such nonsense) just to "fix" things I logically and wisely clicked on Start/Control Panel/system and then clicked on "Change Product key" and entered him valid, legitimate, product key that I had just bought.
  But by entering and submitting the valid, legitimate product key, official, based on my download page on the Microsoft Store returns the following error:
  Code: 0xC004F050
  "The Software Licensing Service reported that the product key is not valid"
  So, thinking I can buy the wrong operating system I checked and checked that I have in fact Windows 7 Home Premium SP1 installed, and I indeed bought Windows 7 Home Premium. So, I seem to be tight. True, Microsoft normal 'solution' in such a situation is to destroy all of your years of data and spray your machine and then rebuild from scratch, but as a Mac guy, that I hope that I'm not yet at that time here and we'll find a clever solution to the problems of this operating system.
  Also, when I run slui.exe and click "go online and fix now" link, I get the following arcane error:
  "http://go.microsoft.com/fwlink/?LinkId=89429&OSV=6.1.7601.2.00010300.1.0.003.09.1033&LS...". »
  "Application not found".
  I tried to rebuild the license store by the great reviews on this page: http://www.sevenforums.com/windows-updates-activation/227921-windows-7-all-sudden-saying-its-not-genuine.html, but it has not solved the problem.
  Then, I spent a lot of money on a new operating system on a platform of big game that is quickly became a brick. Advice on how I can fix it is to have this Windows 7 machine and may he accept the valid license key that I bought at the store Windows online and get active and legitimate, again, would be most appreciated!
  Thank you
  Wulf

  Thanks for the reply but I am a little confused. Having enjoyed that a Windows operating system to the given address of the bios never stopped an operating system to be activated in my nearly 20 years of using Windows

  
  
  An OEM SLP key requires a compatible bios marker in order to activate. OEM system builder and retail keys are not. When you bought your computer probably an OEM SLP key has been used with a hack of activation.
  unless there is something wrong with the operating system.
  There is something wrong with the operating system. It's been hacked and therefore is not authentic.
  
  
  Normally, Windows Activation Technologies runs every 90 days so it can sometimes can take awhile, especially if the WAT update is disabled.
  additional information:

  Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

  (A) OEM SLP: this key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

  (B) SLP COA: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

  
  
  
  

• How to download fotos of iCloud to iOS10

  I would like to know what to do to trigger my iPhone 7 to download all photos in iCloud.

  I had an iPhone 6 with 128 GB that has reached its limit of capacity on 10,000 + photos and 500 videos + and the phone became very slow and unresponsive. To free up space I used the 'optimize' function and downloaded 90 GB of photos and videos in iCloud. (After upgrade to iCloud storage)

  With the new iPhone 7 256 GB I want to download the photos again to get them back on the phone. Apart from disabling the feature 'optimize' (i.e. the original store on the iPhone) I could not find any arrangement that would begin the download process. I'm afraid that the parameter only works for new pictures, especially since nothing happened and I still 213 GB free on my iPhone. I have connected the iPhone to the wall charger and waited, as with the download process. WiFi connection is good with 40MBit/s. When you transfer pictures to iCloud his status is displayed in the photos on the iPhone app, but nothing similar is available for display on the download progress.

  Anyone with an idea of what to do to trigger the download to my iPhone? I would like to cancel my subscription to iCloud.

  Also where can I see if the phone is finished downloading all the pictures and videos?

  If you want pictures on your iPhone without using iCloud, you have to disable iCloud photo library (settings > iCloud > Photos), but I must warn you that if you do this, you will realize very quickly that this quantity of photos and videos that you will not be able to simply hold on to your iPhone.

  You will realize that you need to either use iCloud and continue to pay for storing extra iCloud, or you will need to use another third-party application to store your photos and videos.

  If you think you can do without iCloud and save money, and store photos and videos on your phone, then you're wrong because iCloud does not work like that.

• Last software update - 10.0.1

  Updated software sent over the network to my phone today is too much, and now my phone became unresponsive to click on options, i.e., Favorites, Recents, Contacts, keypad, voicemail.  Sounds have changed, Facebook Messenger messages have changed, how I get to my password has been changed; What else could go wrong with this update and then I go back to the previous?

  "Sounds have changed...". ».  Yes, it happened in the iOS 10.

  In any case, the elements you mention that sound like defects may well be through storage of your iPhone being too full.

  Check the settings > general > storage & use iCloud > Storage manage and be certain that you have absolutely no less (and hopefully a lot more) 10% of total storage of your iPhone free.

• AppleTV doesn't work after software update

  I have a new generation AppleTV and upgraded to the latest version of the software, as it has been invited. After the upgrade, I can't see an image more. It is not the HDMI cable that I joined my old AppleTV and it works. And now the part of the frustration. I called Apple Support and they advised me to go to the Apple Store to get an Exchange because my unit was still under warranty. However, the new unit had the same problem. He works first, and after the upgrade, it became a brick.

  Hello. Please see my response to your previous post Re: Apple TV update allows playback of video tvOS 10.0 breaks.