My phone cannot automatically connect to my WIFI at home.
I have just Xperia Z3 compact. Every time when I get back home, I have to choose my network home and click on connect. I checked the swift. My phone should automatically connect to my home network. Does anyone know what I need to do? Thank you.
What happens if you forget the network, and then add again
Tags: Sony Phones
Similar Questions
-
Phone will now connect only via wifi to otherwise the web network does not work
My Motorola xprt is less than 1 week old. At first, that everything worked well. I got internet connection etc. So I connected to my wifi at home and it worked fine, then my wifi secure at work. but now I can't connect to the internet without wifi. There is no 3G signal activity. I tried to help out with a representatitve of Sprint and after trying to make an update to profile 3 times in vain, he recommended I take it into a store and maybe get a new phone. Prior to this, however I tried to solve the problems of the site via a USB connection with the drivers properly installed (I think) and he was not able to detect my camera. Don't I have some settings wrong? I'm going crazy because I like the phone but can not use wifi all the time.
In fact the question on the data connection helped because I went to my settings and the title of the data management 'enabled data' has not been verified, now everything is ok - I have my 3G back. It seems that the Sprint guy should have just over my settings rather than suggesting that I might need a new phone. Thanks again.
I have another question, but I'll start a separate discussion.
-
Why my phone will not connect to my wifi
Why my phone will not connect to my wifi
If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network
-
How can I configure my Internet XP connection so that it will automatically connect to my WiFi (wireless) without asking me the password whenever I connect?
original title: automatic Wifi connectionHello
By default, Windows XP attempts to connect to networks without wires in the following order:
- Available networks that are in the list of network preferred (by order of registration)
- Preferred networks in the list proposed (by order of registration)
- Other networks according to selected advanced settings
Check out these articles and check if that helps:
To connect to an available wireless network
To set up automatic wireless network configuration
5 steps: how to set up your network wireless home
http://www.Microsoft.com/athome/organization/wirelesssetup.aspx
-
Can not disable "automatically connect" option on WIFI connections
What I think is really strange or normal.
I have windows 8 on my laptop and a wireless adapter Inter Centrino N-2230.
Recently, all the WIFI connections that appear as available have the option "auto-connect" checked. I uncheck the box, but they will be automatically checked again. I don't know that previously, all wifi connections before the box unchecked by default.
However, this is NOT the case with the WiFi one, I mainly use, IE my home cable connection. I can uncheck the option for this one and it remains disabled. Weird.
I'm a bit worried that if I use my laptop near an unsecured connection, it will automatically connect to it without my knowing which resulted in security problems.
No idea if it's a problem and how to solve?
Thank you
I guess all the machines of boredom that are automatically connect using Intel PROSet Wireless Tools. Simple fix.
Go to the control panel.
Type Wireless in the search panel.
If Intel PROSet Wireless Tools is an option up until it clicks (so you can have another problem)
Under the Intel Wifi HotSpot Wizard option, click settings
Uncheck the box to automatically connect to free WiFi Hotspots.
Click on close
Your DONE!
Problem solved unless you do not use Intel PROSet Wireless tools.
-
I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?
< re-titled by host >
Take it to an Apple Store for repair or replacement.
-
Hello, I have a second hand IPhone 5. I can't it connect to my wifi at home. I tried all the steps here, nothing helps, when I add my Sky network to the he only says: can not find the wifi network. Any ideas please.
Which version of iOS are you running on this device?
-
Problem with WiFi connectivity with new Ipad Pro. Unable to connect to the wifi at home. My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home. I am able to connect Ipad Pro wifi work.
On the Pro iPad, tap settings > general > reset > reset network settings
You will need to re enter your Wi - Fi password.
Then try to connect to your Wi - Fi network.
If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network
-
My Ipad mini will not connect with my wifi at home. Other devices are connecting with the wifi at home. I turned the mini ipad market a few times and nothing. He recognizes wifi but when I touch the password, it continues to request the password. Help! It was working fine earlier in the day.
What has happened with your iPad since earlier today, when it worked? updated App or iOS? nothing at all
If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network
-
Troubleshooting-new HP with Windows 7 spectrum XT, does not connect to the WiFi at home?
So I just got my brand new HP ENVY spectrum XT Ultrabook with Windows 7 Home Premium installed. 64 bit. I start it, everything works fine, except that when I connect to my WiFi at home. I tried to connect, entered my password, but it does not connect. Also tried the easy connection on the router. No luck. I checked my old laptop which runs on Windows Vista to see if WiFi worked always, and this is where it gets interesting. I was able to browse the internet and internet worked, but suddenly Windows informed me that "another computer uses the same IP address" and it stops my internet capabilities on my old laptop. I connected my cable ethernet on both computers, and it works for both computers when it is plugged. While that plugged, I discovered that I could create my own IP address, which I did on my old laptop and so far that seems to have solved the problem. However, my DESIRE is always not connecting to WiFi. Any advice?
Hi ZachRhodes3,
· You get the error message?
Follow these methods.
Method 1: Temporarily disable the security software .
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Follow these steps:
Step 1: Start the computer in safe mode with network and check if the problem persists.
Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.
Method 3: Follow the steps in the article.
Windows wireless and wired network connection problems
5 steps: how to set up your network wireless home
For reference:
-
Q10 Q10 blackBerry does not connect to my WiFi at home
My new Q10 see my protected WiFi password but authentication times out when I try to connect. As a sidebar, I'm alse unable to connect my wireless HP printer and have been told it is because of Mac settings to the printer. My printer and telephone connection problems may be related. My priority is to get my new BB to connect to my WiFi. I have connected successfully to a Telus passwork protected WiFi is probably not the phone.
Thank you
I talked to the former, IT supports a colleague (I worked for SW Co.) and he confirmed that all the settings are OK. Router was 8 years old. Went and bought DLINK updated now, printer and Q10 connect.
-
I changed ISP from BT to Sky & my laptop does not connect to new router from Sky, I can connect to other wifi in the Guest House, but not my own, other laptops can connect to my home wifi without difficulty, have tried for weeks to remedy, but does not, sky on phone Adviser took me through various corrections but the woman has admitted that she was not very super-friendly upward as of yet promised callback to track my problem not is not did not materialize at the moment.
At any time.
Glad to be of assistance.
-
laptop is no longer connects to the wifi at home
Computer Dell laptop for my son will connect is no longer our home wifi. It's just less than a year and work very well so that there is one month. Other devices (other laptop Windows 7, Windows 8 Wallpapers xbox) connect without problems. It is a Dell Inspiron N7110 under Windows 7 Home Premium, Service Pack 1. The laptop detects the network and said that the signal strength is 'good' or 'excellent', yet he seems stuck in the login process, cycling between saying 'sign in' and 'limited access' next to the network name. At the top of the login window, it says currently connected to: identification... (network name) not followed by any network access. I tried running the convenience store and reset the network card, but this has not solved the problem.
Any help would be greatly appreciated!
HelloIt seems that you are facing problems with connecting and using the wireless connection.Method 1: I suggest you to follow the steps from the link and check if it helps.Method 2: If the problem persists, I suggest you to follow the steps from the link and check.How can I troubleshoot network card?
http://Windows.Microsoft.com/en-za/Windows7/fix-network-adapter-problems
For reference:Hope this information helps. -
PC does NOT automatically connect to the wifi network, other devices do
I have a pc windows 7, and we have used to have a SIEMENS router + modem via a wifi network. The pc would always auto connect to it.
We now have a new feature called HOTBOX, used by the new company of internet infrastructure that we moved - HOT.I did change the password first because who really cares? His writings on the HOTBOX, my family and my guests can know, and thanks for the auto connect, which i obviously checked when I connected to it, everything should be good. Alas.Other devices connect, it's my smartphone nokia, iPhone, PC. Only this computer can not.Note: the first time where I put the password on this computer to connect, there is also an option for a fast connection or something like that. I did with my nokia phone, but not with pc - it's an easy way by pressing on a button of twinning on the refrigerator, then you can easily connect or w/e.IN ANY CASE! This option seems to have disappeared! Now all that appears when I click on the network name is the password field and a checkbox to auto-connect, no quick option.Any help is appreciated. Thank you.Hello
Welcome to the Microsoft community.
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
Hope this information helps.
-
also when I do connect it has the logo of cable instead of the wifi bar but my ethernet is disable
I got running again by refreshing the windows 8 under Refresh your pc
Maybe you are looking for
-
Freeze screen on the Qosmio X 770 - 107
Hello I have Toshiba Qosmio X 770 - 107 and sometimes a lot of * line and different colors * appear on the screen, and after that this laptop is freezing. I can only turn off the computer by pressing the power button to fix and get back to normal. I
-
Permission to apply penetration tests using blue windows
I am currently creating a book of penetration test. Can I use the free trial of windows azure to conduct my work of penetration test in a Cloud Computing environment and publish the result in a book.
-
Can't download the driver software for FSUP-related
Hello I tried to download the driver for R & S FSUP. It took a third-party Installation. When I click on "Go to the download Site", it's weird retractable coding. Something like that UNHANDLED EXCEPTION: ORA-20802: ORA-20802: ORA-20802: error in T_NI
-
change password administration and don't rember it
I changed my user account password and do not rember how can I recover or create a new password
-
Upgrading to Windows 7 no sound normally use the monitor for audio. Message Hd headphones/speakers connected not Help!