my phone is turned on, but I get a blank black screen

Similar Questions

• When I turn on my computer, I get a blank black screen and must disable it again.

  When I turn on my computer, I get a blank black screen. Then, I turned off the computer and turned it back and a message says turn on in safe mode, safe mode with networking, or safe mode with command prompt.  I turned on in safe mode with network, then I got a message saying check your network settings or material in your control panel, but I don't know what to check. Then I did a system restore to an earlier date. Everything was well computer works well again. Then when I turned on my computer this morning the same thing again. I did the same restore to an earlier date and then was able to use my computer. Someone at - it ideas why this happened? the computer worked fine until two days ago. I use windows xp home addition.

  Hi jantravis,

  ·         There were no significant changes made on the computer before the show?

  ·         Have you installed new software, hardware or Windows updates?

  ·         You get any message on the computer when the problem occurs?

  ·         What is the exact message that you receive in safe mode?

  Check to see if this article helps you.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

• I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows."

  * Original title: start Windows 7

  I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows." When it disappears, the screen just goes black and nothing else happens. Logins appear not at all. I also tried to run in safe mode and safe mode with networking mode, but it has not loaded yet even to the windows splash screen. I ran Startup Repair 3 times now and he has not yet fixed my problem. I was wondering if it might have been damaged in the fall.

  Probably yes it is damaged in the case otherwise he would start.

• I get a blank white screen popping up, I do alt f4 but he returned

  I get a blank white screen popping up I do alt f4 but it comes back

  Hello

  1. Once you get this white screen?

  2. What is the operating system of your computer?

  Provide more information to solve the problems on this issue. Refer to article How to ask a question: http://support.microsoft.com/kb/555375

  Step 1:

  Try to start the computer in safe mode and check if it works fine. To start the computer in safe mode, follow these from the link: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode (also valid for Windows7)

  Step 2:

  If it works well and then start the computer at startup clean and check: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

• Given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen to enter Windows. STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

  Help.

  I just got a refurbished Compaq 7700. It has Windows XP for drives of the refurbished computers.

  I try to boot from the hard drive (HD) and infinite loops, it is never past the initial home screen (black with blue status bar).

  I can't open the safe or the HD mode, it freezes at kmxstart.sys and then restarts again.

  Original title: given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen, to enter Windows.

  I tried to boot from the disk and created Windows appears, then load the files, but then automatically tries to start Windows (without repair option). It then jumps to the BSoD with error code (after advice to verify sufficient disk space, to disable the driver identified, to change video cards, BIOS updates...)

  STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

  Usbccgp.sys - address F773B15F base at F7737000, DateStamp 480254d 2

  Apparently, this driver is a printer driver? I don't have a printer, but do not know how to disable it without access to windows.

  I got a new Philips 18.5 "monitor, an optical mouse and a keyboard with it.

  My guess is that the screen is the problem, because it was full again when I received and therefore not tested with the system before shipping. Not sure about the mouse and the keyboard.

  I tried a few options in the BIOS screen as well, but no dice.

  Help! Before shipping the brand new...

  I thank you and have a wonderful new year.

  Craig.

  Howdy Daavee and Shekhar,

  I hope that your day is going well.

  It turns out that it was the hard drive, it was defective. The new unit arrived and it works beautifully. Thank you very much for all you help. I wish you a happy new year.

  Craig.

• My computer is not properly wake up from its sleep, it is powered, but it gives just a black screen

  Well my pc sleeps properly the problem is when I press the power button to wake up to the top the power turns on and the green lights are on but it sends no signal to the monitor, so all I get is the black screen and the only way to put it back on is to make a vigorous reboot by pressing the Start button. either way, I have Home Basic windows installed on the same pc and I didn't have this problem, now I have windows home edition premium with service pack 2 and installed all available updates. any suggestions?

  Hello

  1st I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem
  and similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in
  Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network adapter power management,
  WiFi, Modem and other devices. (Double click on the device and the power management tab)

  All the default power plans and then set them as you wish.

  ==========================================

  I would also update the main especially video drivers - check again the power management
  Settings after installation.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your
  System. For each driver in the list, additional useful information is displayed: load address
  of the driver, description, version, product name, company that created the driver, and
  more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
  and then go look for new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• my laptop turns on and immediately goes to a black screen with a request for password

  my laptop turns on and immediately goes to a black screen with a blue pop up asking you for a password.

  Getting started doesn't let me go to F2 or F11 or F12.

  THE SCREEN STOPS JUST AFTER 3 ATTEMPTS.

  Help!

  I don't know who installed it but I can't use my computer. (I have teenagers, and no one will admit to it)

  Sounds like someone put a hardware/BIOS password on your computer.  You see the Windows logo?  If this isn't the case, then you must know about this, which has put the password and have them removed.  If we cannot help you.

• Computer does not start, all I get is a black screen

  I use family Vista premium and everything worked right up until the other day. My computer froze and I stopped it to restart. After the reboot, it gave me the ability to start windows normally or in safe mode. I selected at startup of windows. After that, I got was a black screen. The computer is still running, I can hear the fans and the ligts are on.

  I have been looking for a solution to this problem and would really like to fix it myself. I tried all the options menu-f, but all I get is the black screen. Vista came pre installed on my computer, so I don't have the cd/dvd of Vista.

  Please help me if you can.

  Hello

  May I ask what computer do you have?
  Why you n t post this important information?

  You can start in safe mode? Maybe a driver or a virus has something confused upward in the Windows registry and the computer can start t more correctly.

  In the worst case, you must reinstall Windows using Toshiba recovery disc. :(

• Problem re-installing VISTA after the removal of Windows 8 Preview Release, all I get is a black screen with a message "Not found operating system"

  I recently tried Win 8 on my VAIO laptop spare parts on which I ran Vista, after having previously deleted all the files and documents (I don't use often the laptop). Having concluded that Win8 will really work correctly with a touch screen (and the display size was bad as well), I uninstalled WIN 8, understand that I have to re - install Vista from my rescue disks. This I tried successfully a few months previously to make a clean reinstall. However, after removing 8 WIN via the Control Panel, I can't re - install Vista now. All I get is a black screen with a message "The operating system not found" and the rescue disks do not register. What can I do? I like Vista (although I now run Win 7 on my PC) and really want to put it back. Grateful for the advice.

  Well I finally fixed it by tweaking the BOOT BIOS settings and find something along the lines of VAIO Setup. I'm afraid, I just don't remember exactly what I did, but suddenly I found and ran 'VAIO Hardware Diagnostics' gave me a heart when it announced "no error was detected on the Vaio. Then I saw there was an entry for 'VAIO Recovery Utility - Recovery Wizard' and everything started to load. Since the 2 recovery discs I had. Finally, I ran MS Office and Small Business CD-ROM and now everything is back the way that it used to be. Here I had taken more note of how I got to the well Recovery Wizard. I hope that I never have to do it again!

• My refuses Samsung R700 Vista start all I get is a black screen saying a disk read error occurred, press Ctrl alt del to reatart.

  My refuses Samsung R700 Vista start all I get is a black screen saying a disk read error occurred, press Ctrl alt del to reatart.  I can not get to the windows screen, cannot get in safe mode, only the BIOS screen. I managed to get the Samsung recovery screen once, but he said that he did not find the repair disc in! Help, please?

  It is possible that your hard drive is damaged. You can download Windows recovery disk (if you haven't) and run Startup Repair this one.

• When I try to open an all new video I get is a black screen, how can I fix this to see the video

  When I try to open any video feature posted on my comcast home page all I get is a black screen. the same thing when I try to open
  videos in my message. I can't even open a training video.
  How can I solve this problem.
  Thank you for your help.
  Y_Brown

  This does not happen on my computers.  Try to download Firefox from http://www.mozilla.org and see if that makes a difference.  I also recommend the safe boot and checking the virus.  Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Good luck.

• When I open Photoshop CS4 all I get is a black screen with photos

  I can't get the pictures to open in CS4, all I get is a black screen.

  I have Vista Business operating system.

  I install the admin, I have video gforce3, ops Windows Vista Business card.

  1.67 GHz Intel Core 2 Duo
  cache of 64 kilobytes main memory
  secondary memory 2048 k-cached

  2046 megabytes installed memory

  You need to update Photoshopto to version 11.0.1.

  What is the exact model number and manufacturer of the video card? Have you checked for drivers updated on their website?

  If you have done all that, see if the problem goes away when you turn off OpenGL in PS preferences.

• cannot re start my system by getting only a black screen with recovery of window failure

  original title: do not re start

  I have a dell inspiron laptop and tried to install windows7 vista upgrade, since, so I can not re boot my system by getting only a black screen with insufficient recovery window, I followed the instructions on the screen to re-boot without success, and when I insert the disc of the operating system for re install nothing happens, Pls help TKS.
  Myrna

  Hi myrnaspiers,

   

  1. What is the exact error you get when you try to start windows.

  2. what type of installation you have done, it's a custom Setup or an upgrade.

  3. check if you have the option to go back to the old version of windows.

  I suggest you follow the link to black screen when I start Windows 7 below.

   

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

   

  I also suggest you start in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you have not used the repair which is a system repair option in Windows vista start DVD, you can use it and check if the problem persists.

  To open the Startup Repair refer

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  For more information about the Startup Repair, refer

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

• I downloaded the application, and all I get is a black screen. It will not start. What's wrong?

  I downloaded the application, and all I get is a black screen. It will not start what is wrong?

  Sign-in black screen | Creative cloud desktop application

• Trying to copy and paste a screenshot of a video game and stick it on the paint. All I get is a black screen Uni I put any graphic setting. How to paste it on Paint? I am able to do it on Vista, but not on Window7.

  Screenshots to work in painting with Windows7, unable to work, all I get is a solid black screen capture.

  I thought that is no longer a problem in the current version of Windows. In previous versions all that depended on what you were trying to catch and how it was made.

  First, make sure the game doesn't have its own ways to make screenshots. There are a lot of games that allow you to do and screenshots that are just after that saved to a folder. You must search settings keyboard... maybe you will find a similar option. What is the name of your game... maybe I can try to find this option.

  Other things... maybe it will be possible to intercept a tool cutting, then try this: when you're in the game, press the Windows key (it will open menu start without closing a game) > all programs > Accessories > capture tools > press an arrow next to new , and select full-screen Snip