My photosmart more B210a printer displays error "use cartridges setup", even if they have disappeared-

It was supposed to be an insert ordenary fees cartrides - HP of root cause and good for the printer - but diplay repeat myself that I need to use startup cartridges? It's impossible cause - how to solve this?

(I can't access all the features of the touch screen - the screen is locked on the error message)

If the printer is demanding cartridges Setup, then the device will not work until these cartridges are installed.  If you do not have these cartridges, it must make these cartridges of HP Technical Support.

Click here to see full details of HP's global technical Support.  I hope this helps.

Tags: HP Printers

Similar Questions

  • Photosmart Plus B210a print or copy black

    My B210a Photosmart more to print or copy in black mode 'Copy' or 'Print PC'. Black cartridge is almost new and has worked for 2 weeks; color cartridges are between 25% and 33% of ink left. Colors will be printed, and there is no error message. Wireless printer works from a PC with Windows Vista.

    Help, please.

    Hi, if the printer is on a thing of warranty that may be worth soaking the print head...

    (1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
    (2) remove all ink cartridges, then remove the print head Assembly.
    (3) gently put the printhead nozzles down in water and soak for 5 minutes.
    (4) remove the print head and gently dry the electrical contacts.
    (5) replace the print head in the printer and then reinstall the ink cartridges.

    http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/HP-6500-Office-Jet-E709a-black-printer-cartridge-HP-920-not/m-p/447545#M36315

    Can you please let me know how you go?

    Thank you

    Ciara

  • Reset password on photosmart more B210A-Mac. How are you?

    Reset password on photosmart more B210A-Mac. How are you?

    Good,

    If you have changed the password for your wireless network and you must reconnect the printer to the network, is that OK?  If so, then restore the default settings is remove the printer from the network and allow to run the Wireless Setup Wizard again.  This will allow to connect to the network again, but with the new password that was setup.

  • HP Officejet Pro 8710: How solved Do not use cartridges Setup

    My ink in the printer was low and I change the cartridge with the new full ink cartridge, but the printer was show "Do not use cartridges Setup..."
    Pleasw, help me, thanks.

    Hello

    Thank you for using the HP Forums.

    Cartridge installation is for a one time use. The following cartridges must be un-installing that is bought in stores.

    Hope that helps.

  • Photosmart more B210A: B210 printer, error message "Scanner component is broken.

    Out of the blue, the control panel flashing. "Turn the printer off and on again. If problem persists, compenent scanner is broken and you will not be able to scan, photocopy"was after no use in a week. Had not analyzed in more than a month. Turned printer works. Scanner bar makes a horrible noise as it slipped into the glass back on the start of the printer and I get the same message. Click OK, and now all I can do is printed. Any help as to why after not using the printer and no use of the scanner that it would happen? And perhaps how to fix without having to buy a new All in One Printer?

    Hello Macguyver,

    It seems to be a problem with the scanner and the printer needs to be REPAIRED.

    Please call the HP Technical Support for assistance.

    If your printer's warranty, you can be equipped with a resume option.

    If you are in the United States, toll-free # is 1-800-474-6836

    If you're not in the United States, and then connect to www.hp.com , bottom left it is an icon of the world map, click it and then select the region that you belong to, which would then provide the support options for you for this region.

  • PhotoSmart more B210a: how to remove a ghost printer

    I tried to install wireless a B210a on a home network. I finally gave up that effort, for reasons that I won't go into this thread. I decided to go back to a USB connection. First of all, a bit of history.

    This printer has been used in this household for about 3 years. A person who had knowledge a bit these things here performed the installation, and it never got the connection wireless set up. This person is now out of the picture, and I was managing IT chores.

    My first step was to uninstall the printer and try again.  Before I did, I noticed he seemed to have two instances of the B210a on the system, but in devices and printers, one of the icons has been grayed out. I deleted both. I also deleted all programs HP printer software.

    Now, I have reinstalled the printer with a USB connection. I found it weird that the printer installed as 'HP PhotoSmart Plus B210 Series (copy 1)', but I let that slide. I opened a Word document for a series of tests. In the print dialog box, I was surprised to see two lists of the same printer again! See the additional printer with exactly the same name, less stuff "(copie 1) '." To add to the confusion, it also displays a message: ' error - remove: 3 documents pending. "

    Huh? What happens here? How to remove these three documents, and how do I get rid of the ghost printer?

    Hello and welcome to the community of HP @Caesar1948,

    I understand that you are having trouble installing your HP Photosmart Plus. I'll be happy to help you.

    To resolve the error message "error - delete: 3 documents pending ', below, I've posted a link to a document that offers solutions of troubleshooting on this issue.

    HP printers - print jobs stuck in the print queue (Windows)

    Regarding the 'Phantom' printer, see the link below. This document provides instructions on how to uninstall the printer software and remove the printer from the list of devices.

    HP printers - uninstalling the software of the printer (Windows)

    Please try all the steps in order and get back to me with the results. If this helps will testify for my answer before hitting the 'thumbs up' below, or c lick the 'Accept as Solution' button if I helped you reach a solution.

    I hope this helps and have a nice day.

  • Photosmart more B210a no impression and the poor print quality options

    I have a Mac running osx10.9.4 and a connected wireless, B210a printer all-in-one. Everything works well until a recent update that removed all the printing options (color / gray scale / etc. of paper type and print quality)

    The last thing to print very well were some photos in July. Since then whenever I try to print, the black is so fake and colors too bright - almost as if she always strives to pring on photo paper. When we do a re alignment or own heads, prints in black as it should, but every other time, it is terrible. I am a independent and I occasionally print estimates out to customers... but I can't at the moment.

    My son has the same problem with the same printer of his macbook (unknown model / system information)

    Don't know what to do and don't want not throw everything out the window in a fit of anger... Please help!

    Hello

    Welcome to the Forums of HP Support!

    Sorry to hear about the recent issues with the B210a Photosmart on Mac 10.9.4. The printer will copy without any quality problem?

    I would try the following on the Mac;

    1. Reset the printing on Mac system. (Mac OS x: how to reset the printing system)
    2. Repair disk permissions (ignore the statement about 10.7)
    3. Download and install this: v.2.16.1 for OS X HP printer drivers.
    4. Add the printer using print and scan from system preferences.

    Let me know if this helped.

  • HP Photosmart more B210A: black ink cartridge will not print.

    The black ink will print on my printer.  I installed new ink and cleaned the print heads.  I did a review of the printer and the ink of color appeared only.  The printer is recognizing the cartridge when I check the ink levels.  The first page after cleaning came out very faint then anything.  At first, I thought that the new black ink cartridge was defective.  So I replaced it with another new - no difference.

    The only change is that I have installed all new cartridges when all printing has become very low.

    Help, please.  Thank you.

    Fushing did not work, however, we used a demo on Utube and has not used the distlled water.  That could be the problem. The printer is about 8 years old, we decided to get a new one.  Thank you very much for your help.

  • Photosmart more b210a

    I had my B210a Photosmart more for awhile & went through several sets of ink cart.  However, after the last cartridge change, something strange happened.  I do a lot of printing labels, & the printer began to print about ¼ "too high, to align with the grid of the print.  It does now, on every print job.  It seems that the paper is not synchronized qued. with the print job, & picks it up just a little too late.  The first line on any job 'print page' is split in two, on the top edge of the page.  It was always perfectly aligned before.  This is the first problem I've had with this printer, otherwise, it was just great!

    Jason;

    I've tried it & it has not corrected the problem, however, while there, I found a button that says "default printer"!  Ta - Jean Pierre, back to normal!  Thank you very much for the help.  Because even if this didn't solve the problem, I found the button restore everything by working on your suggestion !  I had spent several days trying to troubleshoot & fix the problem in the computer program, & this button does not exist here!  Have a wonderful day!

    Thank you & God bless;

    Jim

  • the Photosmart b110 series printer: Ox19a0020 error code

    My printer has error code ox19a0020 I looked for alternatives to the HP site and I cleaned the printhead manually according to instructions and pulled the plug and replace etc etc and yet it still has the same error message. Help

    Hi @nannie07

    Thanks for getting back to me.

    I agree, you probably need a new printhead.

    Printhead replacement games are available from HP customer or authorized service providers assistance.

    Contact HP for service in all countries except Asia-Pacific.

    If you have completed all the above steps and your product still has a problem, the printer service
    First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
    Cost of repair out-of-warranty printers may apply.

    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number
    File number and phone number are displayed.

  • Photosmart more b210a no installation no option for OSX version 10.8.3 on macbook pro

    Can anyone help?

    You just bought a macbookpro and the operating system is version 10.8.3 and it doesn't seem to be an option to install this OS for our printer HP Photosmart Plus B210a

    Is there a way around this or do I have to buy a new printer?

    Thanks for any help that anyone can give!

    Hello

    First upgrade your operating system to its latest version (10.8.5) to avoid problems as possible, click the Apple, then software update.

    Then download and install the software below:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-107726-1&cc=us&DLC=en&LC=en&OS=4142&product=4021935&sw_lang=

    Once you're done, restart your Mac and run the software update once more to get the latest drivers from HP.

    Shlomi

  • HP Photosmart Plus - B210a printing problems

    My photo printer prints now all my photos in red.  First of all, this occurred when the ink cartridges were low.  I replaced the time and the Red pictures disappeared.  When photos started printing in red, I have replaced all cartridges with HP ink cartridges and made sure all cartridges have not all the bands on them to restrict the flow of ink, but still to print photos in red.  I also cleaned and aligned printheads several times but the problem persists.  By tools, my ink levels is now up to 50 percent of the Red photo printing.  I use photo paper bought at Costco, which is the same paper used when the images did print correctly.

    What should I do for the photo printer to get the pictures to print correctly?

    I don't know exactly of what has caused the problem, but I have speculations. It is possible that the ink pipes have stamps, air preventing the ink being subject to a push of the ink cartridge for the print heads. That's why it took 2-3 printheads clean processes to get the ink out. Another possibility is that the print nozzles are blocked and the print head cleaning process after several tests. Regarding prevention, the only thing that I could think off is to make sure to use the power button when you want to turn off the printer. This is to ensure that the print heads is capped correctly to avoid the obstruction. So basically when you get the power failure, be sure to turn on the printer as soon as you get back power. Run a clean print head immediately.

  • C410 Photosmart will not print red after magenta cartridge replaced

    Hello

    I just replaced the cartridge Magenta on my Photosmart C410, it was a genuine HP cartridge and the printer shows ink levels are now full but when I try and print anything in color that it is, or printing of the Red hues.  Any suggestions as to what I can do?

    Thank you

    Hello

    Please click here here for access which should solve the problem.

  • Failed to load the local profile. IO error. All files in My Documents have disappeared. How to restore

    did a normal turn on the computer.  Message came back failed to load the local profile.  IO error.  When he signed me, all my documents in My Documents had disappeared.

    A corrupt profile is fairly easy to recover with minimal losses.  Refer to the following procedure:

    "How to recover damaged Windows XP user profile"
      <>http://support.Microsoft.com/kb/555473 >

    Corrupt profiles are almost always accompanied by hard drive corruption.  After recovery, scan your hard disk for errors using chkdsk with the /f or/r option

    "How to perform disk error in Windows XP check"
      <>http://support.Microsoft.com/kb/315265 >

    The disk check procedure can take hours depending on the size of your hard drive and the amount of corruption and cannot be interrupted, then run it when you won't need your computer for awhile.

    HTH,
    JW

  • HP Photosmart more B210 - display error Message: cartridge door is open!

    the window display printer says 'ink cartridge door is open' and made useless printer! I can't do anything, cannot access the menu on printer, just nothing done! I rebooted the cartridges, no luck. Impossible to get a new printer code to reinstall. clues?

    Hi Shaysappa, sorry to hear that you have found errors on your printer. If you haven't already done so, connect the printer directly to a wall outlet power cable. The reason why I ask for you to do is just simply because the printer has already constructed in the surge protector and if the product is connected to a bunch of bar /, it will get all the power necessary for the proper functioning and it will give false errors on the screen or on the computer. Here is a link that explains the problems when connected to an uninterruptible power supply/Strip/surge protector power. If this does not resolve the problem, it could also be the sensor in the printer that the cartridge door snaps. If this is the case, you will need to contact HP Total Care at 1-800-474-6836 or if you are outside North America, please contact HP worldwide.

    Thanks for your time.

Maybe you are looking for