My pixma mx922 load from tray 2. I get an edit this tray 1 has no paper.

Similar Questions

• How can I activate Firefox prevented this page from automatically redirecting to another page? This unfortunate thing has now completely blocked me connect to a Web site.

  How can I disable this message blocking? "firefox prevented this page automatically redirecting to another page.
  It used to be boring, but now he has completely blocked me to connect to a Web site.

  Tools > options > advanced > general...
  then uncheck the...
  I myself have this option because I stand bad pages themselves help to redirect to who knows what. Why can't you just go sites where I click?

• PCL5 printing codes to turn off paper tray switching when the tray is in the paper

  We have a HP P4015n with 3 trays, tray we letterhead, tray 2 has plain paper, tray 3 preprinted forms (all dimensions 8.5 "x 11" paper ").  This is related to a Linux system with printing from a legacy software - they are mainly text documents that have integrated the PCL control codes.

  The problem, when a drawer is empty, print will continue to the next state bar, which can have a header of letter or preprinted form, etc.

  Can I turn off automatic tray switching?  Either using a code printer PCL or via the printer control panel?

  If I print on tray 3, this tray is empty, I want the printer to wait until the tray has paper once again and do not use a different tray.

  I played a bit with the 'document type' (letterhead, pre-printed form, etc.) setting found on the built-in printer web page, but when I send a job there, the printer needs someone to hit the 'OK' on the printer. I guess that the printer is looking for the paper incorporated in the corresponding document type.  Is there a print PCL code for that?

  I have done research on PCL5 printer control codes and can not find, or another command.

  Thanks for any help,

  This should help you:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=bpl05272&JumpID=reg_R1002_USEN

  On the other hand moving up to the next plateau, depends on the printer.  Some let not work continue to the next bar if the paper type is defined differently, but it is more common that the printer will just continue.  The only solution I have found is when big jobs you know will exceed capacity of the tray should just make sure that the right paper is in all stores.  The other thing is too, to keep the full trays (just make sure to put the fresh paper under the paper that is in the status bar to reduce interference issues).

  I am including the link to the history of PCL/PJL because inside under the additional Documentation, it links to PDFs of the technical manuals detailing everything that you could ever want to know about hand coding for printing using these languages:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=bpl04568

• LaserJet 4050 - ordinary letter from Tray 1 load

  I get the error 'Letter regular Tray 1 load' every time I try to print to our HP LJ4050. It wants to pull paper from Tray 1 even if tray 2 is full. I thought my being a problem with tray 2 so I moved the bin with a printer of the same work, but always get the same result. It is not a driver issue because I have the same problem when printing a map menu or the monitor configuration page. I checked that Tray 1 is set to the FIRST and tray 2 PLAIN. I restored the printer to the factory setting but I still have the same problem. What could be?

  I had the same problem.  It turns out that I had moved the print and moving it, the paper tray #2 offbeat kind of paper of legal size rather than inch paper standard 8x11.5.  To solve the problem, I removed the tray paper contained the blue tab at the very back of the shelf and pull forward into the right position for standard paper.  This solves the problem for me.

• Photo paper moves sideways when printing on PIXMA MX922

  I have a new Pixma MX922 printer and when you print photos of 4 x 6 paper moves from side to side during the last inch or more printing.  I have tried different paper with the same result, currently have a Canon Photo Paper Plus Glossy II in the printer.  The book seems to begin to move laterally when it makes contact with the paper output tray.  I use the Canon software to print my photos.

  Hi mclark4013,

  To try to prevent the paper to move, we can allow the setting prevent abrasion on the printer paper.  To do this, please follow these steps:

  1. press the MENU key.

  2. Select SETTINGS, then press the OK button.

  3. Select DEVICE SETTINGS, then press the OK button. The device settings screen appears.

  4. use the up/down arrow keys to select the PRINT PARAMETERS, and then press the OK button.

  5. use the up/down arrow keys to select the parameter AVOID the ABRASION of PAPER, and then press the OK button.

  6. use the up/down arrow keys to select Yes, then press the OK button.

  Please try printing again.  Once printing is complete, please be sure to set this parameter to OFF.

  If you still have problems, we ask that you call please 1-866-261-9362, Monday - Friday 10:00-10: 00 ET (excluding holidays) for assistance.  A Canon technical support representative will be happy to help you.  There is no charge for this call.

• Canon PIXMA MX922 printer will allow no 2-sided Word documents

  I just installed a new Canon PIXMA MX922 printer to replace an old MX882.  Everything works fine and I am able to print on both sides documents from web pages and e-mail by checking the 'duplex' box on the menu drop down print...  However, I am unable to both sides print all Word documents.  No check box 'two-sided' descend, and no "duplex" option is available, as it was with the MX882.  I never had this problem with the old MX882.  Can you help me?

  Thank you very much.

  Hi LonnieC,

  To set the option to print double-sided on a Mac, please open the printer driver:

  1. Select layout... in the file menu of the application.  The Layout dialog opens.

  2. Select print... in the file menu of the application.  The Print dialog box opens. In the print dialog box, you can set the paper type and print quality for printing.

• I have a Canon pixma mx922 and seems to only print photos... How do I print a document?

  I bought my mom a mx922 pixma to print from your iphone / ipad.  She was printing documents, then pictures, and now she doesn't know how to print the document.  Can anyone help with this?  I'm not in the same State as him, and she is not very tech saavy...

  Hi RONNA999,

  Please check that the PIXMA MX922 is connected to the wireless network:

  1. press the

  button on your MX922 PIXMA.

  2. Select Setup and press the button.

  3. Select device settings, and press .

  4. Select settings LAN, then press .

  5. Select Configuration Wireless LAN and press .

  6. Select your wireless network and press .

  7. Enter the wireless network password and press .

  The PIXMA MX922 will now be connected to the wireless network and it will be able to print from the iOS device.

  Please note that Canon Forum is not intended for immediate help, but a place for the community to give you help and comments. If there is a need for emergency assistance, please use the link below to join our friendly technical support team:

  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

• Try to put in place the PIXMA MX922 on a student network. Help!

  My PIXMA MX922 does not place on my student network. My network is the kind you will first need to get on the student network, then download software so you can connect. I need to print wireless and I can't do and I already have stuff to print. Anyone out there that can help, I appreciate it and get it quick print! I'm on a MacBook Yosemite running.

  Well, I think that after pouring on the manual online I found a solution for wireless printing. Bluetooth. I ordered a dongle used on Amazon for $10 - a Canon suggested, the D - Link DBT - 120 Bluetooth USB Adapter Wireless. There is absolutely no way printers can work on most college networks. The reason being that they are public networks and basically anyone can use the printer from anywhere. Therefore, the only other option is a local printing solution. But instead of a cord that need three people to connect whenever they need to print, optional Bluetooth works great and it is easy to put in place.

• HP LASERJET 4050: HP LASERJET 4050 PRINT JOBS WILL NOT PRINT FROM TRAY 2

  I have a HP Laserjet 4050 printer and it won't tank prnt 2.  It prints from the manual feed tray 1.  It does not recognize tray 2 printing, but it will let me know when the tiroir2 is missing.  No idea what this could be or how to fix it?

  Any help would be greatly appreciated.

  Toni

  If you print a configuration page using Tray 1, then you can look and see what paper size and type it thinks are in tray 2.

  You will see probably is one of these elements is bad and most likely it is misdetecting the size of the paper due to a failure of the Board of Directors that detects the position of the fingers on the side of the status bar.

  I think you have probably found a message on the screen that says load paper in Tray 1 whenever you try to print from tray 2, if this is the case it should also allow you to hit the go button and print using any type of paper or the size it considers is in tray 2.

• Device - Why won't my ipad connect/load from my pc?

  Why won't my ipad connect/load from my pc?

  Hello

  1. What is the brand and model of the iPad?

  2. what exactly happens when you connect to iPad?

  3. you get any error message?

  4. what operating system is installed on the computer?

  5. don't you make changes to the computer until the problem occurred?

  I suggest that you try to run the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Hope this information is useful.

• Canon Pixma MX922 problems

  I have a Canon Pixma MX922, I liked when he was running wireless on Windows 7 on my old computer.  Since I replaced my computer with a Windows 8.1 running a new, it does not work, it crawls.  If it moves at all.  Sometimes it will print a full page, but there usually prints some lines and spits half done page.  He's literally printed a page on a single line at a time - at about half the speed of old matrix printers!  What gives?  I have not changed wireless service - only operating system.

  You have installed the latest driver

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx922#Dr...

• Problem with new pixma mx922 and Canon Menu fast

  Just buy a Pixma MX922. Analysis of and print well. If I use the Quick Menu of Canon, it shows the scanner but not the printer, so I can't use all the photo print settings. I'm on a MacBook Pro with OS - X El Capitan version 10.11.2. It's connected to an AirPort Extreme wireless. Can anyone help?

  If you go to System Preferences, and then select Printers & Scanners 922 MX is listed as a printer Hello?

  If Yes, click the '+' and wait a minute or two IJ version appears and install it.

• Canon Pixma mx922 screen begins to turn

  Just bought my Pixma MX922.  Its been great so far, the only thing is the screen continually without reason.  Looks like it is awakened by something random.  I have disconnected the telephone line, disabled all services cloud, and even when all the computers are off the screen lights up as his is about to do something.

  Someone at - he seen elsewhere or have a fix?

  Hello.

  The LCD display will wake up if the printer receives the signals.  If the printer is used on a network, monitoring of utilities such as a firewall or even your router may be peripheral Ping on the network.  This signal to wake up the display.  The nature of proprietary routers and firewall programs, it can be difficult to identify what is broadcast signals through your network.  If the printer is rarely used, you should consider switching off the printer on when it is not in use.

  It has not responded to your question or problem? Find more help contact us.

• loaded from the PC?

  Hello, I'm Antonio again

  I'm new Sansa 2 GB ususario... It is normal that the appliance does not work all is loaded from the PC?

  Yes it can not be used when it is connected to a PC, or even 'written' to the device.

• Why does take so long to load from the time wherever I power up until it takes to get to the login screen? help taking too long

  Why does take so long to load from the time wherever I power up until it takes to get to the login screen? help taking too long

  You should take a look at your startup programs and decide what is really necessary and what is nothing more than useless clutter. There is nothing wrong with the startup programs, some may be really useful or even necessary for your personal needs. But keep in mind that many programs build to start when you start the computer and that most of them must not start when the computer starts, all they do is slow down your boot time and clutter of things when you're trying to solve problems, and some are downright harmful!

  I mean, have you really need things like real Planner and Gadwin Print Screen running all the time? These programs will run very well, even if they are not started automatically every time that you start the computer. Go to these programs and change/disable their boot option. Some may be difficult to kill for public assistance services can be useful when you try to control startup programs. Try CodeStuff Starter, it's safe and easy to use, I think you'll like it, download it here:

  http://CodeStuff.tripod.com/products_starter.html>

  Use AutoRuns to check axis start, Richard:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx>

  Use Cclenar-> tools-> start

  http://www.CCleaner.com/download/builds.aspx>

  I can't tell you what to keep, startup items it is a personal preference, but pretty well all the startup items indicated by CodeStuff Starter are safe to disable, and changes are easy to reverse if you change your mind. Searches for items it shows you and decide whether or not these things are really useful or necessary. Some programs will be started at startup without your knowledge and over time, that list can expand to include useless parasites, part of good computer maintenance includes regular control of these startup items and the removal of the unnecessary.

  Suggest that you first spread malware as the cause of the problem by following these steps:

  I. - delete your temporary files

  Clean the system (compensation to all temp/tmp folders and included all the content offline, the tif browser, delete the cookies of compensation.)

  Do a disk cleanup. Click the Start button. in the search box, type disk cleanupand then in the list of results, click Disk Cleanup. Better and easier to use - ccleaner.

  Download the basic version (slim) via

  http://www.Piriform.com/CCleaner/builds>

  The basic version (slim) does not contain the toolbar disgusted

  DO NOT USE ANY cleaning of the advanced options. DO NOT TOUCH THE REGISTRY OR TOOLS. At least not for now.

  Reset

  II. - have your system scanned as a result of security/antivirus installed.

  III. - download, install, update and run both of these tools to a-squared free scans:

  MalwareBytes anti-malware (MBAM)

  http://www.Malwarebytes.org/products/malwarebytes_free>

  SUPERAntiSpyware (SAS)

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html>

  UTC/GMT is 18:16 on Wednesday, January 18, 2012