My previous internet provider set a VPN on my IE8. They have now failed and I have to delete.

Similar Questions

• Get too many conections dropped to internet. doesn't seem that internet provider is Comcast or Qwest. Any suggestions on the causes and fixes?

  It seems that every 10 to 15 minutes if I use Hot Mail or IE, I get a message saying that the internet is temporary. not available.
  Sometimes my computer seems to hang up when you go to another site. Each operation is much slower that I experienced last fall.
  Restart does not help the situation.
  I had this problem for 6 to 8 weeks.
  I have friends who also have this experience, but another Internet service provider.

  Hello

  1. what type of connection you are average (wired or wireless)?

  In case you use the connection drops of connections and wireless, you should check with the provider of Service Internet (ISP). Just make sure that you have the latest drivers for Windows Vista. You can uninstall the driver from Device Manager and update it again from Device Manager.

  You can also try the steps of troubleshooting provided in the link below.

  How to troubleshoot network connectivity problems in Internet Explorer

  http://support.Microsoft.com/kb/936211

• Can not connect to Thunderbird. My internet provider told to contact you for resettlement because I clicked on a link in an email and it is empty. The link

  Cannot activate Mozilla Thunder Email. I clicked on a link in an e-mail and the screen went white. My internet provider [time warner cable] has suggested that the link was spam and viruses. Need to uninstall and install Thunderbird and I need help. Bill Huston such # 858-453-5364 thank you
  Bill Huston

  I see you just posted.
  Try restarting your computer. If is starts OK, open programs to see if they are working properly. Open your browser and simply go to one or two trusted sites. Then, open Thunderbird and check your messages.

  If you cannot successfully restart your computer, or if the program will not work as it should, take your machine to an approved computer repair shop and have them check.

  Make sure that you install a good antivirus program.

  BTW
  It is not recommended to put personal information such as a phone number, in the forum messages.

• I can't add/subnet mask 31 255.255.255.254 ISP WAN > static IP setting in VPN Firewall SRX5308

  Hello

  I can't add/subnet mask 31 255.255.255.254 ISP WAN > static IP setting in VPN Firewall SRX5308. When I try to apply it, I get the popup error message like "invalid IP subnet mask. Please enter 0/128/192/224/240/248/252 for octet 4 ". I try to add provider NTU fiber optic internet service in one of the 4 WAN settings. The vendor gave me a 31 block IP and the subnet as 255.255.255.254 mask. It is a limitation in this firewall? I have to ask the provider to give me a 30 block the IP instead? With 30 block IP subnet mask will be 255.255.255.252 who is authorized by this firewall setting. I tried this on another (SnapGear SG560) firewall and it works without any problem. See the screenshots below. Can someone please?

  

  

  concerning

  Ridwan

  / 31 would be used in specific scenarios where you * really * need to keep the address space and on links only point to point. To be honest I've never met anyone, or any ISP that uses it. It works on point to point, because, well, there no need to broadcast address because there are only two devices on the link (one on each side of the cable)... IP address ranges would be;. 0-. 1,.2-. 3, etc.

  Most (if not all) Netgear devices will prevent you from setting 31, but you will probably be able to use without problem in all 30 cases, according to the setup of the ISP I do not think that it would cause you problems really. But if you can, I would certainly ask a 30 instead.

• Moved and change Internet provider, send no emails Outlook Standard 2007

  We moved and changed Internet provider.  We have Outlook Standard 2007 and now I can't send emails.  They sit in my Outbox. At first I was getting, but not more.

  Hello

  You need to log on the new site of support to provide. Whether they take over the pop3/SMTP protocols.

  If so, read the instructions and set up a new account in Outlook using information found on the website of the provider.

  http://support.Microsoft.com/kb/287532

• How to change internet provider

  I've already implemented the valet with my dsl internet provider and everything worked fine.  I'm spending internet suppliers in a few days to a cable company.  I'm not sure how to proceed.  I just unplug the old valet dsl modem and plug in the cable modem connection?  just valet reconfigure itself to a cable connection and keep my old username, password and ssid? Or do I have to redo a facility?  If a new s setu necessary I don't think I can just insert the easy key because it has the old configuration data on it.  How can I make the new configuration?  In addition, the first time that I put in place I wanted to use my printer a network printer shared - but may not have connected it to my pc and using shared network protocols.  I plugged the printer directlyinto the router, but I forgot the instructions given to me both for the addition of this device.  It seems to be instructions for adding a printer wireless, but do not to run just a rigid cable connection in the valet.  I tried to ask questions by email to the valet to support with a no case of a person who has helped me before but noone evergot back to me. Any help is appreciated. Thank you.

  If you replace the cable DSL internet service provider in this case you need to uninstall the existing Cisco Connect software on the computer... Reset the router and the power of the network cycle...

  Do the following connectivity Modem router---> computer--->... Then install the Cisco Connect software... It will help you in the configuration of the router...

  If you want to provide the old SSID and password for your network without wire then you can set those as well...

  As far as do the printer as a shared network printer, it depends on the operating system running on your computer... Let me know which operating system you are running on the computers.

• No info from internet provider to my E3000 router from a bridged walkway to Arris T268G

  I am a customer of Comcast and had my gateway Arris T268G filled so that I could use my E3000 router for a wireless/wired network. My configuration is: on the bridge in bridge at the entrance to the internet of my E3000 then the cable coming out at my SE2500 Ethernet switch which I then cable to my PC to the cable connection. No internet. My wireless router is broadcasting because I'm picking up signal but no internet connection. Looking at the dashboard of the E3000 'Status' tab there is no information for the internet provider. I hit the button refresh and renew the IP button and still nothing.

  (1) is my correct configuration?

  (2) is there a setting I should change to communicate correctly with the T268G gateway (defined in bridged mode)?

  Peyates, it is possible that the IP address of the modem and the router's IP address are both in the same IP range. Change the IP address of the E3000 to, say, 10.10.10.1 before you connect it to the modem. In addition, if the DHCP server on the own modem is enabled, you can configure the E3000 and cascade via LAN to LAN to the modem.

  See this article.

  http://Linksys.custhelp.com/cgi-bin/Linksys.cfg/php/enduser/std_adp.php?p_faqid=3733

• I changed my internet provider and so I have the new email address. How can I delete my old e-mail address and put them in a new in Outlook express?

  I changed my internet provider and so I have the new email address.  How can I delete my old e-mail address and put them in a new in Outlook express? AND another problem, if I want to send pictures by e-mail... default .it my no more used by email, not allowing to send because I do not agree with them. Thank you

  original title: outlook express

  XP was the last version of Windows to use Outlook Express and that you are in a forum of Vista. Assuming that Windows Mail:
   
  Tools | Accounts and add the new address/provider and remove the old.
   
  Windows Mail: Setting up an account of end-to-end
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish 
  Once the old account is removed, your second issue must be without object.

• "These files can not be opened","your internet security setting prevented one or more files being opened.

  I followed aid guidelines that provided me by windows, but it does not solve my problem,

  I'll click on Device Manager and I get this error message which is "Can't open these files", "your internet security setting prevented one or more files being opened.

  I have tried everything that windows told me to do but without success!

  I click on options internet and changed levels of security around but yet once, without success! Does anyone have an idea?

  Thank you very much for the support, I thought of a solution, I bought Windows 7, I installed it on a partition again and fortunately I no longer receive errors

• Cannot connect to internet after connecting to VPN Cisco ASA 5505

  Hi all

  I am an engineer of network, but haven't had any Experinece in the firewall for the moment, I'm under pressure to take care of a ASA 5505 were all VPN and incoming and out of bounds have been set up, recently I've had a few changes and re made the change, but unfortunately, he took some configurations that are ment for VPN now I am facing a problem,

  VPN connection, but impossible to navigate on the internet is my problem, I tried inheriting tunneli Split, but I coudnt get through it seems, I did something in a bad way, I use here for most ASDM,.

  I paste the Configuration for the investigation, although he's trying to help me.

  ASA Version 8.0(4)16 ! hostname yantraind domain-name yantra.intra enable password vD1.re9JLbigXJxz encrypted passwd hVjSWvtgvNN21M./ encrypted names ! interface Vlan2 nameif outside security-level 0 ip address Outside_Interface 255.255.255.240 ospf cost 10 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 switchport access vlan 2 ! interface Ethernet0/6 switchport access vlan 2 shutdown ! interface Ethernet0/7 switchport access vlan 2 shutdown ! boot system disk0:/asa804-16-k8.bin boot system disk0:/asa724-k8.bin ftp mode passive clock timezone GMT 0 dns domain-lookup inside dns domain-lookup outside dns server-group DefaultDNS name-server 192.168.0.106 name-server 192.168.0.10 domain-name yantra.intra same-security-traffic permit intra-interface object-group service Email_In tcp port-object eq https port-object eq pop3 port-object eq smtp object-group service DM_INLINE_TCP_2 tcp port-object eq ftp port-object eq ftp-data port-object eq www object-group service RDP tcp port-object eq 3389 object-group service DM_INLINE_SERVICE_1 service-object icmp service-object icmp traceroute object-group protocol TCPUDP protocol-object udp protocol-object tcp object-group service voip udp port-object eq domain object-group service DM_INLINE_TCP_1 tcp port-object eq ftp port-object eq ftp-data access-list outside_access_in extended permit tcp any host  object-group Email_In access-list outside_access_in extended permit tcp any host FTP_Server_Ext object-group DM_INLINE_TCP_1 access-list outside_access_in extended permit icmp any any echo-reply access-list outside_access_in extended permit tcp any host ForSLT eq www access-list outside_access_in extended permit tcp any host Search object-group DM_INLINE_TCP_2 access-list outside_access_in extended permit tcp any host IMIPublic eq www access-list outside_access_in extended permit tcp any host eq www access-list outside_access_in extended permit tcp any host SLT_New_Public eq www access-list outside_access_in extended permit object-group TCPUDP any host 202.133.48.68 eq www access-list rvpn_stunnel standard permit 192.168.0.0 255.255.255.0 access-list rvpn_stunnel standard permit 192.168.1.0 255.255.255.0 access-list nat0 extended permit ip 192.168.0.0 255.255.255.0 192.168.100.0 255.255.255.0 access-list nat0 extended permit ip 192.168.0.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list nat0 extended permit ip 192.168.100.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list nat0 extended permit ip 192.168.0.0 255.255.255.0 COLO 255.255.255.0 access-list nat0 extended permit ip host IT_DIRECT 192.168.0.0 255.255.255.0 access-list inside_access_in extended permit object-group DM_INLINE_SERVICE_1 any any access-list inside_access_in extended permit ip any any access-list inside_access_in extended permit ip 192.168.0.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list inside_access_in extended permit ip 192.168.0.0 255.255.255.0 202.133.48.64 255.255.255.240 access-list inside_access_in extended permit ip 192.168.100.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list inside_access_in extended deny object-group TCPUDP host 192.168.0.252 202.133.48.64 255.255.255.240 access-list inside_access_in extended permit ip 192.168.0.0 255.255.255.0 COLO 255.255.255.0 access-list outside_1_cryptomap extended permit ip 192.168.0.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list outside_1_cryptomap extended permit ip 192.168.100.0 255.255.255.0 192.168.1.0 255.255.255.0 pager lines 24 logging enable logging timestamp logging console debugging logging buffered debugging logging trap debugging logging history emergencies logging asdm debugging logging host inside 192.168.0.187 logging permit-hostdown logging class ip buffered emergencies mtu inside 1500 mtu outside 1500 ip local pool rvpn-ip 192.168.100.1-192.168.100.25 mask 255.255.255.0 ip verify reverse-path interface inside ip verify reverse-path interface outside no failover icmp unreachable rate-limit 1 burst-size 1 icmp permit any traceroute outside asdm image disk0:/asdm-61551.bin no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface nat (inside) 0 access-list nat0 nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) netmask 255.255.255.255 dns static (inside,outside) FTP_Server_Ext FTP_Server_Int netmask 255.255.255.255 dns static (inside,outside) ForSLT SLT_New netmask 255.255.255.255 static (inside,outside) Search LocalSearch netmask 255.255.255.255 static (inside,outside) IMIPublic IMI netmask 255.255.255.255 static (inside,outside) SLT_New_Public SLT_Local netmask 255.255.255.255 static (inside,outside) netmask 255.255.255.255 access-group inside_access_in in interface inside access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 202.133.48.65 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication http console LOCAL aaa authentication ssh console LOCAL http server enable http 192.168.0.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map rvpn_map 65535 set pfs crypto dynamic-map rvpn_map 65535 set transform-set ESP-3DES-SHA crypto map outside_map 1 match address outside_1_cryptomap crypto map outside_map 1 set pfs crypto map outside_map 1 set peer  crypto map outside_map 1 set transform-set ESP-3DES-SHA crypto map outside_map 2 match address outside_cryptomap crypto map outside_map 2 set pfs crypto map outside_map 2 set peer crypto map outside_map 2 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic rvpn_map crypto map outside_map interface outside crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=yantraind proxy-ldc-issuer crl configure crypto ca server shutdown crypto ca certificate chain ASDM_TrustPoint0 certificate f8684749     30820252 308201bb a0030201 020204f8 68474930 0d06092a 864886f7 0d010104     0500303b 31123010 06035504 03130979 616e7472 61696e64 31253023 06092a86     4886f70d 01090216 1679616e 74726169 6e642e79 616e7472 612e696e 74726130     1e170d30 38313231 36303833 3831365a 170d3138 31323134 30383338 31365a30     3b311230 10060355 04031309 79616e74 7261696e 64312530 2306092a 864886f7     0d010902 16167961 6e747261 696e642e 79616e74 72612e69 6e747261 30819f30     0d06092a 864886f7 0d010101 05000381 8d003081 89028181 00f6d1d0 d536624d     de9e4a2e 215a3986 98087e65 be9f6c0f b8f6dc3e 151c5603 21afdebe 85b2917b     297b1d1c b3abf5c6 628afbbe dda1ca27 01282aff 6514f62f 2965c87c 8aab0273     ab59dac6 aa9f549b 846d93fd 44c7f84f b29545bb d0db8bbb 060dfbbf 592a15e3     3db126be 541003c4 38754847 0b472e62 d092fec2 d556f9e3 09020301 0001a363     3061300f 0603551d 130101ff 04053003 0101ff30 0e060355 1d0f0101 ff040403     02018630 1f060355 1d230418 30168014 9f66b685 2ebf0d5a 97a684ba 9a9518ca     a8ed637e 301d0603 551d0e04 1604149f 66b6852e bf0d5a97 a684ba9a 9518caa8     ed637e30 0d06092a 864886f7 0d010104 05000381 81003b49 2a7ee503 79b47792     6ce90453 70cf200e 943eccd7 deab53e0 2348d566 fe6aa8e0 302b922c 12df802d     398674f3 b1bc55f2 fe2646d5 c59689c2 c6693b0f 14081661 bafb233b 1b296708     fc2b6cbb ba1a005e 37073d72 4156b582 4521e673 ba6c7f7d 2d6941c4 9e076c39     73de21b9 712f69ed 7aab4bda 365d7eb3 39c05d27 e2dd   quit crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh 0.0.0.0 0.0.0.0 outside ssh timeout 15 ssh version 2 console timeout 0 dhcpd address 192.168.0.126-192.168.0.150 inside dhcpd dns 192.168.0.106 192.168.0.10 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics port threat-detection statistics protocol threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 webvpn group-policy DfltGrpPolicy attributes dns-server value 192.168.0.106 vpn-tunnel-protocol IPSec l2tp-ipsec svc split-dns value 192.168.0.106 group-policy rvpn internal group-policy rvpn attributes dns-server value 192.168.0.106 vpn-tunnel-protocol IPSec webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value rvpn_stunnel default-domain value yantra.intra username rreddy password 6p4HjBmf02hqbnrL encrypted privilege 15 username bsai password 41f5/8EINw6VQ5Os encrypted username bsai attributes service-type remote-access username Telnet password U.eMKTkIYZQA83Al encrypted privilege 15 username prashantt password BdrzfvDcOsnHBIdz encrypted username prashantt attributes service-type remote-access username m.shiva password p5YdC3kTJcnceaT/ encrypted username m.shiva attributes service-type remote-access username Senthil password qKYIiJ9NmC8NYvCA encrypted username Senthil attributes service-type remote-access username agupta password p3slrWEH1ye5/P2u encrypted username agupta attributes service-type remote-access username Yogesh password uQ3pfHI2wLvg8B8. encrypted username Yogesh attributes service-type remote-access username phanik password inZN0zXToeeR9bx. encrypted username phanik attributes service-type remote-access username murali password Ckpxwzhdj5RRu2tF encrypted privilege 15 username mgopi password stAEoJodb2CfgruZ encrypted privilege 15 username bill password Z1KSXIEPQkLN3OdQ encrypted username bill attributes service-type remote-access username Shantala password aCvfO5/PcsZc3Z5S encrypted username Shantala attributes service-type remote-access username maheshm password Fry56.leIsT9VHsv encrypted username maheshm attributes service-type remote-access username dhanj password zotUI9D6WWrMAh8T encrypted username dhanj attributes service-type remote-access username npatel password vOfMuOZg0vSkICyF encrypted username npatel attributes service-type remote-access username bmandakini password Y5UZuahgr6vd6ccE encrypted username bmandakini attributes service-type remote-access tunnel-group rvpn type remote-access tunnel-group rvpn general-attributes address-pool rvpn-ip tunnel-group rvpn ipsec-attributes pre-shared-key * tunnel-group  type ipsec-l2l tunnel-group  ipsec-attributes pre-shared-key * tunnel-group type ipsec-l2l tunnel-group  ipsec-attributes pre-shared-key * ! class-map global-class match default-inspection-traffic class-map inspection_default ! ! policy-map global_policy policy-map global-policy class global-class   inspect esmtp   inspect sip    inspect pptp   inspect ftp   inspect ipsec-pass-thru ! service-policy global-policy global prompt hostname context Cryptochecksum:7042504fefd0d22ce4de7f6fa4da14fa : end 

  Thanking you in advance

  Hello

  If you want to have Split-tunnelin in use. One you have patterns for.

  Then you will need to fix the configured "private group policy" under the "tunnel - private-group

  tunnel-group private general-attributes

  strategy - by default-private group

  Then reconnect the VPN Client connection and try again.

  After that the VPN Client connection only transmits traffic directed to the LAN on the VPN Client connection and all Internet traffic beyond the VPN connection directly to the Internet through the current connection of the users.

  -Jouni

• How do I allow a pop-up from a trusted site IE chat from my internet provider Help Center?

  I need help with a problem with Shaw.ca- my internet provider. They have a chat online Help Center which I can't access because Firefox is blocing their popup. I can't find anything about him on my computer but I'm not very computer literate. I can't find any help on your website either. Please HELP QUICKLY >
  Thank you
  Ann

  Hi Annmac,

  Generally, you will see a bar at the top of the page asking you if you want to allow pop-up windows. This happens to you?

  If this isn't the case, you got nothing to worry about. You can add an exception for the blocker. Take a look at this article and it will show you how to allow popups for a particular site.

  Hope this helps!

• I had to change the Apple ID due to a new internet provider and the subsequent new e-mail address.  My iPhone and iPad constantly ask the password for my old user ID.  This is the password I know more knowledge or records.  What should do?

  I had to change the Apple ID due to a new internet provider and the subsequent new e-mail address.  My iPhone (5 c/9.3) continually pray for my old user ID password.  This is the password I know more knowledge or records.  How can I get the iPhone to recognize and use the new Apple ID rather than the old?

  What function or service on your phone asking you the code of the older?

  If iCloud, you must provide the Apple ID and the password that was used to connect. Call the Apple Support if you can't give it. They may be able to help. You are the original owner of the phone? You have the invoice/proof of purchase?

  Any service can be disconnected and then again.

• LaserJet M1217nfw MFP: HP laserjet printer stop printing after the change of internet provider - solution: Reinstall...

  Hello

  my all-in-one HP laserjet has worked on my computer laptop windows 7, via a wifi connection, in the past;

  internet provider has recently changed, and since then, I can't install the printer so that it works continuously.

  After installation initial (via cable between laptop and printer), everything seems fine;

  I select "share with everyone".

  = > everything OK, everything prints, for two users.

  Problem:

  The next time myself or another user trying to print, just a few days later - nothing works anymore.

  NO error message;

  use of the printer is visible in the queue;

  printer is visible (and selected as the default printer) in "devices and printers" with a green check mark, but in light grey, as if idle.

  When (right) by clicking on "help", no error is found... but nothing prints, always.

  How can I avoid to do the reinstall whenever I want to print from my laptop?

  (Printing from my Tablet works great!)

  Would be very grateful for your help... Thanks in advance!

  Hi @KatLe ,

  I see that you have problems printing to different user accounts. I will definitely do my best to help you.

  I have provided a document for the definition of security permissions for printing to see if this will help.

  Can the administrator account on the computer printing, or were they also intermittent problems?

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. Find and fix common printer problems using the tools of diagnosis HP for Windows?

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If you need help, let me know.

  Good day!
  Thank you.

• Satellite U400 - new internet provider, in trouble with Wi - Fi access

  Hi all

  I have a satellite u400 laptop and
  I changed my internet provider.
  Before that, I have never issue with wifi access.
  But since a few days, I lose my internet access lost time...
  Now, I stay connected to the wifibox, but only the internet is down with limited access.

  I restore all the computer, reinstall the latest drivers and it works well.
  But after that, I start all update of Windows
  And the internet connection is down yet again...

  What is the problem?
  I already checked the settings of the card stack and the laptop...

  Thanks in advance

  Hello

  Have you noticed this fault Wlan using the laptop with the battery only or also with AC adapter?

  Have you installed the latest version of the driver WLan?
  If this is not the case, this!

• Internet provider has changed, now cannot print

  Hello-

  I hope that I can ask a good question.  We just changed to a new internet provider today, and my computer will connect is no longer on my wireless printer.  It is said, 'Impression', but then the progress bar moves and no printing occurs.

  Operating system Vista, HP 6500 wireless (all-in-one) printer.

  Should I reload my drivers?  How can I find out what Vista I am running?

  Thanks in advance for your help,

  drmony

  Try to reset the wireless settings and connect the printer to the new network.

  First press settings > network settings > network by default.

  And then tap Settings > network settings > Wireless Setup Wizard.

  This should reconnect the printer to the network.