my printer has stopped working after upgrading from XP to Vista? What should I do now? __

Similar Questions

• Dell Vostro 1510 Audio has stopped working after the update of Windows Vista.

  Nice day!

  My computer (vostro 1510) began to revolt recently and I wonder if you could help me with this.

  Basically, last week I was talking to my friend on Skype when suddenly my computer restarted due to the update of Windows (I have Windows Vista Business 32-bit). After he turned his back, I realized that there is no audio from the speakers. I tried using headphones but still - no sound.

  Immediately, I went to the 'Sounds' menu and checked if my speakers were still 'active '. They have been.
  Next thing I decided to do was to reinstall the Realtek audio driver, however, did not help or the other. Since then, I tried to reinstall several times but, unfortunately, everything remained the same.

  Then, I thought that maybe something was wrong with my hardware, however, audio spent ALL Dell diagnostics audio tests (so my hardware is very good, yes?). I also tried "System Restore" option and returned to the point before the update... Nothing has changed!

  In addition, as far as I know, all the audio settings in Windows (checked in Registry Editor) are OK.

  What should I do now? My last hope is to completely reinstall the system, however, I decided to contact you first.

  Thanks in advance!

  Solved the problem by reinstalling the operating system.

  Thank you!

• Boot Camp has stopped working after upgrade to Yosemite

  Hi all

  I also lost Boot Camp after upgrade to Yosemite. I tried to recover by following the instructions on this forum but did not.

  Issues related to the:

  1. can I get it back? See some of the data below.

  2. otherwise, I can create a new training camp after the recovery of wasted space?

  3 is it better to first upgrade to El Capitan?

  Thank you in advance!

  ➜ ~ diskutil list

  / dev/disk0

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB 950,5 disk0s2

  3: disk0s3 Apple_Boot Recovery HD 784.2 MB

  4: Microsoft database 32.0 GB disk0s4

  / dev/disk1

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS BrontoSSD * GB 950,1 disk1

  Logical volume on disk0s2

  90BC997C-0C7C-40FB-896D-973BC192A123

  Unencrypted

  ➜ ~ list cs diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 46320040-2E97-49D9-A652-87CBA72E637D

  =========================================================

  Name: BrontoSSD

  Status: online

  Dimensions: 950509715456 B (950,5 GB)

  Free space: 18956288 B (19.0 MB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 950509715456 B (950,5 GB)

  |

  + -> 14BD334A-53BE-4C89-949D-2E8E5EF30A59 family of Logical Volume

  ----------------------------------------------------------

  Encryption status: unlocked

  Encryption type: no

  The conversion status: NoConversion

  Direction of conversion: - none -.

  At encrypted extensions: No.

  Fully secure: No.

  Password required: No.

  |

  +--> Logical Volume 90BC997C-0C7C-40FB-896D-973BC192A123

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 950138437632 B (950,1 GB)

  Conversion progress: - none -.

  Reversible: Yes (no required decryption)

  Name: BrontoSSD

  Volume name: BrontoSSD

  Content indicator: Apple_HFS

  ➜ ~ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 1953525167

  start index size summary

  0           1         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 1856464288 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  1856873928 1531680 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  1858405608 32621336

  1891026944 62496768 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  1423 1953523712

  1953525135 32 table dry GPT

  1953525167 1 dry GPT header

  ➜ ~ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 121601/255/63 [1953525168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639]

  2: AC 1023 254 63 - 1023 254 63 [409640-1856464288]

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [1856873928-1531680]

  * 4:87 1023 254 63 - 1023 254 63 [1891026944-62496768] VS NTFS

  You must run Testdisk. Have what you tried so far?

• Pavilion dv5020ca sound does not work after upgrade from xp to vista Home premium

  HP Pavilion Dv5020ca windows vista Home premium

  After the transition from xp to vista will not install the drivers for my sound card and the error message I got was

  cannot find media any help would be apperciated

  Hello:

  See if the works of audio driver XP installation...

  Download and run this driver.  If it automatically installs audio, very well.  If it's not... close any Windows error.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-42513-1&cc=us&DLC=en&LC=en&OS=228&product=3223544&sw_lang=

  Go to Device Manager and click on the multimedia audio controller needing drivers.

  Click the driver tab.  Click on set to update driver.  Select Browse my computer for driver and at the bottom of this window software option, select Let me pick from a list of drivers for devices on my computer.

  Select disc and go to: C:\SWSetup\sp33443\CPL30A5a and select the Conexant High Definition Audio from the list and see if the driver will install.

  Then restart.

• Quark has stopped working after upgrading operating system

  Downloaded 10.11.2 El Capitan and now my Quark Express friggin crashes (Ver 10.1.0.1) advice?

  Thank you

  Tony

  Please download and install EtreCheck from http://etrecheck.com/

  Run it and post the report here.

• All-in-One L7550: all-in-One printer L7550 stop working after a Win 10 update

  In the last two days my printer has stopped working after many updates to Win 10.  Functions in fact any printing has stopped (swirling points) to include my PDF SW.  I downloaded the last SW all-in-One and tried to install it.  The first thing that happened is that he tried to remove the previous SW.  Hooked to halfway through it.  Then, it was a nightmare.  I can't get the rest of the SW uninstalled nor can I install the latest SW.  I even tried to install the previous SW in Win 7 compatibility, but after extraction it just stops.  Tried to install the current version in Win 8 conpatibility, but it also wrong on.

  Any ideas wher can I start?

  Welcome to the Forums of HP, @CharlieCC,.

  I hope to help you with installation and uninstallation issues you are having with your Officejet L7550 on Windows 10. Before you get any software troubleshooting, try to make a copy of the front of the printer. If copies work fine, continue with the steps below to work on the issues of software!

  Step 1: perform a level 3 Uninstall to remove completely all the files to your system printer.

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose to save money, save it on the desktop: all-in-one printer, HP Officejet Pro L7550
  4. After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the folder Util
     
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe (or .bat).
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.

• stopped working after upgrade

  Firefox has stopped working after the upgrade to version 27. I reinstalled 26, it's been a while so I thought that the problem had been sorted out, so today tried to install the latest version. Same problem as 27, just does not work when you click it. I have Zonealarm later, and I have disabled all the internet security, control applications and anti virus. The same, followed instructions to remove firefox so reliable programs it tempt me the fact still. But there is no prompt . As a last resort, I uninstalled Zonealarm. Still does not work after a new installation.

  I am a website developer, and all my tools are on Firefox. Chrome never problems with the update, so what is happening here? Surely with the power of Mozilla, that sort of thing shouldn't. AM also on XP SP2 which deserves to be supported on the nocturnal compilations, I just read (cannot upgrade to SP3 for compatibility with other software).

  New version looks ace, so please help.

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• on dv6 fingerprint reader has stopped working after installing Norton 2012

  Fingerprint reader has stopped working after installing Norton Internet Security 2012 on both of my notebooks from HP.

  Product name: HP Pavilion dv6

  Operating system: Windows 7 64-bit

  Error message in Device Manager under biometric devices in Device Manager displays an exclamation mark beside validity sensors (WBF) (PID = 0018). The following message is under the general tab: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  Driver is present and seems to be up-to-date.

  Appreciate your help.

  I have finally isolated the problem of my software lack of HP dv6 fingerprint reader. I think Norton Removal Tool, available online at www.symentec.com/nrt, was the reason. I am sure this conclusion because the exact same problem occurred after I installed Norton Internet Security 2012 on laptop HP same as my wife. I tried, in vain, to uninstall and reinstall the driver for the biometric fingerprint device provided by Validity Sensors, Inc.

  After spending a day and a half to try to "solve" the problem, I decided to restore my system and go back to the prior agreement of the point of the installation of Norton. Thank you HP to make this process quick and painless. Don't forget that if you installed anything after the restore point, it will have to be reinstalled.

  Fortunately, there's a less intrusive on CD of Norton removal tool. This utility uninstalls an older version of Norton you are requested to restart and then installs the latest NIS. It is a method of removal safer that wide brush offered by the Norton Online link, which wipes everything remotely suspect.

  After reinstalling Norton Internet Security 2012 from the CD, everything works as it should, including the fingerprint reader.

• Printer error: "Print filter Pipeline host has stopped working" Dell V505 whatever that means and what is the fix?

  Printer error: "Print filter Pipeline host has stopped working" Dell V505 whatever that means and what is the fix?

  frohnj,

  See if This THREAD helps. It is for another printer, but should work for you printer, too.

  Rick

• Sony motion eye cam on my sony vaio vgn-fe48g has stopped working after installing win7

  Please could someone help me to set up the Board Sony motion eye cam and FN keys that don't work after upgrading from Vista to Win7, Sony are no help at all.

  Device Manager can't even see the cam. I tried to install it manually and the nearest me am added the cam, I was able to start.

  Maybe you are missing the drivers. Are there drivers available for this W7?

  You should check with Sony for your specific model and area/region Web site to see if they provide any W7 drivers at all. If Yes, have you installed them for the web cam?

  EXAMPLE - this site is for the India, they have a few drivers for Vista HP 32 bit, but none that seems for W7 HP 32-bit. - http://www.sony.co.in/support/product/vgn-fe48g

  This is a missing driver for W7 then issue you might try to install drivers vista in compatibility mode, but this is not guaranteed and can cause other problems. Back up your data first to be safe. See http://www.sevenforums.com/tutorials/98073-drivers-install-vista-drivers-windows-7-a.html and you need the correct version of the pilot 32 or 64 bits depending on the case.

• Microphone does not work after upgrade from Vista Home Premium to Win 7 Home Basic-Sony Vaio VGN-NS25G

  Microphone does not work after upgrade from Vista Home Premium to win 7 Home Basic Edition. Laptop model Sony Vaio VGN-NS25G, bought in India

  My built-in mic not working anymore after the upgrade from Vista Home Premium to win 7 Home Basic Edition. Model laptop Sony Vaio VGN-NS25G was bought in India. I have taken the loacl Sony Service Center and they said that Windows 7 drivers for the microphone Sony was not yet available. They mentioned that the only way to fix the problem was to upgrade to Vista. Is this true? Where can I get these drivers for the microphone, and they are not available, when will they be available?

  Hello

  Method 1.
  Interestingly, I found the drivers for Windows 7 for this particular model of Vaio. Here is link thye:
  http://www.Sony-Asia.com/support/download/362654/product/VGN-ns25g/sectionfirst?subpage=detail

  I suggest updating all your drivers from the link above and drivers Realtek especially.

  Method 2. Set the default Microphone.

  Once the drivers installed to check if the microphone is the default value, here's how:

  Exercise the functions mentioned below to adjust the Microphone as default:
  1. Click Start and click on Control Panel.
  2. click on sound, then a new window will open.
  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
  4. now check if the Microphone is listed there and right-click on it and choose activate.
  5. turn highlighted that Microphone and click "set as default".
   
  For more information see the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• G72-a20EM screen has stopped working after updating the BIOS F.48.

  How is it possible that BIOS update recommended could turn off the LCD screen.

  Currently I see almost anything on the screen, but vga port works. But increasingly,.

  Intel graphics card is not recognized.

  G72-a20EM screen has stopped working after updating the BIOS F.48.

  What can I do to fix that?

  Good news!

  I found the working version, and it is version F.08.

  Supposedly new version have different Active cables, and this is the reason why the screen is dark.

  So, case closed, everything is perfect.

• My illustrator CS3 has stopped working after I updated my OS to Yosemite 10.10.5

  My illustrator CS3 has stopped working after I updated my OS to Yosemite 10.10.5, but my InDesign and Photoshop work very well. How can I get Illustrator to start working again?

  NOTE: I read a previous thread on the opening of the Java Control Panel in the system preferences (because I installed the new java my computer asked me for marketing immediately after in the new yosemite), but there is no icon Java not found. I installed this new java download more than once and still can not find it. Help!

  olou,

  If the suggestion on possible recording by Larry fails, see this page

  https://www.Adobe.com/account/my-products-services.html

  I'll try to ask a personal forum friend who knows what to do.

  For download, read this

  http://helpx.Adobe.com/Creative-Suite/KB/CS3-product-downloads.html

  and update, see

  http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Macintosh

• "First Pro CC 2014.2 has stopped working" after a few moments of running and usually after you import a video clip.

  "First Pro CC 2014.2 has stopped working" after a few moments of running and usually after you import a video clip.

  I use a Lenovo T440p with Intel Core i5 @2 laptopp. 60 GHz, 8 GB of RAM. Windows 7 64-bit with Service Pack 1. Intel HD 4600 graphics card. All the drivers are up to date.

  All other non - CC Adobe video editing programs work.

  Help, please. Thank you.

  Dennis,

  Changing the video rendering engine should have solved the problem. Is it still pending?

  Thank you

  Regalo

• Get error "ggsci.exe has stopped working" after the upgrade of OGG 12.1.2.0.0

  Hi gurus of the Oracle,.

  I'm testing the OGG Version 11.2.1.0.19 to 12.1.2.0.0 upgrade. But after upgrade, I am getting below error while trying to access ggsci.exe

  ggsci.exe has stopped working

  If followed the steps (GoldenGate 12.1.2.0 Install/Upgrade on OEL 6.4 x 86-64 |) Blog of Maaz Anjum)

  1. stop all processes Ogg

  2. has taken the old OGG home backup

  3. call the YES program and gave the location of the OGG existing House 11 G

  4. once the upgrade has completed, I tried to access the ggsci.exe but by mistake. Setting error image.

  

  If someone has solved this problem. Please help me.

  Best regards

  Jamsher Khan

  I strongly suggest to talk to support.