My printer HP F-340 in one stuck in the queue when I try to print images.

Similar Questions

• OfficeJet 4500 510n - print jobs stuck in the queue when using wireless

  Hello

  I bought just a new Officejet 4500 510n yesterday and I have a Dell with Windows 7 64 bit laptop that I connect to the USB or wireless. The reason for this is that sometimes, the laptop is not right next to the printer and we need to print things (for example, my wife works upstairs sometimes with the laptop and the printer is downstairs in the living room). I was able to get the configuration of the printer on both the wireless and USB without any major problems and it prints fine when I print via USB. However, when I print wireless, the print job appears in the queue and shows that it is printing, but he never curls work all the way. The work gets "stuck" while waiting in line, for example, it gets stuck at 772 bytes of 940 bytes

  I downloaded the HP Print Diagnostic here tool and ran it and and it passed all the tests first time. However, when I goto the last test, which is to print the test page, it sends the print job to the queue and then everything gets stuck as indicated above. I was able to cancel the job and it comes off very well, but restarting the work does not work, it just get stuck again. Meanwhile, I don't get ANY error messages at all.

  Here's what I've done regarding troubleshooting:

  -Ping the printer - spent

  -Restart the service print spooler - no change to the problem

  -Check that the printer is set as deafult - spent

  -Update of HP Ran to ensure there is no missing updates - found 2 updates and install them

  None of the above has solved the problem, so I'mm this ad here in the hope that someone may have had this problem before and fixed it.

  Thank you!

  Thanks for the reply.

  It turns out that I could solve it myself. I went to add the printer wireless on another laptop, I have here on my home network and it printed a page of test very well, so I thought it must have been a bad installation on the main laptop.  I removed everything and reinstalled as a wireless printer, and it worked perfectly. Amazing what can make a bad installation.

• BlackBerry smartphones stuck in the Middle when I try to update my device

  Hello

  I have blackberry bold 9790 my software bundle 7.0 2254 I was trying to update 7.1.0.2039

  so when the unit start back up it stuck in the middle and now I can't use my blackberry or make calls

  Please advice what should I do?

  However, I tried to remove the battary and put it again but its also show that

  

  Hi abucci1990

  Do you have a previous backup of your device, because to recover your device from this current situation you lose data within your device, try the steps to recover your device from this current situation:

  (Credit JSanders)

  There are two methods for recovering for you to try:

  One:

  • Open Blackberry Desktop Software & connect your device with the PC using the USB cable, without inserting the battery.
  • You have three Retry option, update or cancel, and then click Update.
  • Once it is at the stage of the "initialization of pocket" update, then insert the batteries.
  • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

  Second:

  • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failurehttp://www.blackberry.com/btsc/KB17877
  • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
  • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
  • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
  • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.

• E HP Envy 7640 All-in-One-Sanchez: now, I have my documents stuck in the queue and I can get out. Help! I hate this printer...

  Whenever I change the paper (photo paper) when I get back to paper ordinary, it is immediately past offline or it gets stuck in the queue.  Now it is stuck in the queue.  Is it possible to get this printer to print without all these problems.  I am extremely illiterate on computers and this crazy.

  You helped me with "off connection" now can help you with this problem.  Thanks for the help, I really appreciate it.

  Hello @Sam141, greetings!

  Welcome to the HP support forums. I'd love to help you with your printing problems with your printer Envy 7640.

  I understand that you are a new user with this printer, that's why I suggest using an automated tool to correct this and many other common printer related issues.

  Go to http://hp.care/2bZ9w2q to download and install HP print and scan the doctor. This tool will be quickly and automatically perform several tasks resolution known problems for this problem. You can save this for future issues you can still.

  Please let me know if that solves the problem, or if you need assistance.

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• How can I cancel one stuck in the online print queue?

  I have a single document in the queue, it's a http://..., when I opened the window to cancel printing, it shows that removes... but it is not, despite the pages are just 112 KB.

  The printer is everything is OK.

  vidalamadeo,

  Try to run delete print jobs to delete the print job stuck in the queue.

  Rick

• HP2710 print jobs stuck in the queue even if test page prints

  I have a HP Photosmart 2710 all-in-one printer attached via the USB port of a laptop ASUS G73Jw running under Windows 7 64-bit. The printer worked fine with a Toshiba laptop running Windows XP 32-bit only. But now cling all the documents in the queue if thay are Word, pdf or Notepad. I tried everything I could find on the HP forums. I downloaded the last software update. I ran the diagnostics HPPDU utility. After that I ran this utility test page prints fine, but nothing else gets stuck in the queue. I obeyed different instructions to disconnect and reconnect the printer, do a reboot etc after running the diagnostic utility. I tried other 'solutions' various users have suggested, including disabling bidirectional printing, restarting the spooler service and directly without the print spooler. Nothing works.

  Given that I can print a test page I doubt that it is a mechanical problem. I suspect some sort of driver incompatibility. Because I downloaded the driver more once in frustration I think there could be pieces of drivers still present, although I can't view them with the uninstall command or the Device Manager. In fact, I can't find any file with any HP device software. Maybe it's because the driver is downloaded directly from Windows 7 when you do a Plug-and-Play.

  There are a large number of driver files under everything in the printer properties. But I don't know which driver files should be there.

  I'm about to trash this printer unless someone has an idea what to do.

  Help!

  It could cause a conflict if the printer is stuck which occupies the port because it could block all communication with anything that is not this printer.  It may be something wrong with the way that ASUS manages virtual USB drivers, but I have not heard anything.  You might try to give them a call if you're really curious, just to see if they know anything.

• HP8100 print job stuck in the queue

  I have a print job stuck in the queue of my HP Officejet Pro 8100.  I tried to delete the file, but it's been blocked for a day and I can't print anything else, it seems as if the job locked up in the queue stops other jobs.

  I did the following:

  tried to delete the file-will not remove status said "deletion" for more than a day.

  power cycle

  connection direct USB printer

  power cycle - unplug the power cable, the power button for 1 minute - leaving only machine for 30 minutes.

  Nothing has worked so far.

  Help, please.

  Thank you

  DITT

  Hello

  Try the following.

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the document has been deleted.

  Kind regards

  DP - K

• HP officejet pro 8600 printer: print the job stuck in the queue for a printer hp officejet 8600

  I try to print a document on my 8600 pro hp officeject and printer, but it will not be printed because there is a print job stuck in the queue.  I tried to cancel the print job stuck but will not remove. I tried to turn off the printer, but it still won't delete. Can you tell me how to cancel a print job that is stuck in the queue?

  Hello

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.

  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.

  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the document has been deleted.

  Kind regards

  DP - K

• Everything I print gets stuck in the queue, but the document is printed

  ORIGINAL TITLE: Spooler

  I installed a printer on a pc windows 7 64. Everything I print gets stuck in the queue, but the document is printed. The printer is on the network, I tried to restart the spooler and erased the record of the spooler, but perisisted of the question, given that the document gets stuck, no other agency will be able to print, remove the paper and print again to print but the file gets stuck again on the queue. I tried to change the IP address, but the same thing happened. Can someone help me?

  Hi, Omorguz,

  Printer brand and model, if you please.

  Start > run > type services.msc

  Press enter

  Scroll down to print spooler

  Select stop

  Let Windows stop the spooler

  Control Panel > printers and Faxes folder

  Right-click on the printer icon, then select open

  If you see pending orders in the queue, select the

  Click file > cancel all Documents

  If a job shows the deletion, but never finished, open the command prompt window

  Start > run > type cmd

  Press Ok

  Enter Net Stop Spooler

  Press enter

  Wait for the DOS window opens and is

  Open the command prompt window

  Type Net Start Spooler

  Press enter

  If that does not cancel the print job:

  Your directory of spools Windows XP is located at

  C:\WINDOWS\SYSTEM32\SPOOL\PRINTERS

  It will usually contain files like these:

  FP00008
  FP00008. SHD

  There are two files for each remaining print job.  Just delete these and restart the computer.  Your queue should now be provisioned.

  If you are printing over a network, and the queue is not clear after the above steps:

  Go to the computer that has the shared printer connected and perform steps 1 & 2 above.

  If this does not work, then go to the computer when he was sent to the printing of the task and perform the steps 1 & 2 on this computer.

  Run chkdsk

  Start > run > type CMD

  Press Ok

  Type C: chkdsk/r/f

  Press enter

  You will receive a message re: volume must be locked and you want to start scanning reboot?  Press y and press enter

  Type Exit to close the CMD window

  Restart the computer for the scan at startup

  This will check the integrity of your data on the hard drive of computer as well as find and fix errors that could corrupt your data or program files.

  I even recommend that you uninstall the printer and when you are done uninstalling, restart computer.

  When you reinstall the printer, reinstall it using the compatibility mode

  How to install a hardware device using the compatibility mode driver.

  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/80cae5ee-dc98-4A2F-8284-a1ab826059b7

  It works on Windows 7 Professional, comprehensive and business - Windows XP Mode - it's free

  It's the best of both worlds: the new Windows XP Mode allows you to run Windows XP older right on your Windows 7 desktop business software.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-XP-mode

  e FAQ or choose a link from the top of this page.

• Jobs FRUSTRATED stuck in the queue on Officejet 6500 with IP printing

  

  I'm especially frustrated because I just typed in many details, and when I click on "Preview" my text disappeared. Thank you, HP!

  Like others, I have an Officejet 6500 E709n. Print a test page, the diagnosis, the HP printer utility page, I cannot print any document. "They simply wander in the queue with the message host ' 192.168.2.6 network ' is busy. retrying in 10 seconds... forever. Yes, I tried to delete and add the printer again and he gets found very well.

  I can print with USB.

  I can print with Hello (but which is slow, so I turned off)

  It's okay if my OS X 10.5.8 laptop is connected wirelessly or through ethernet.

  The printer is connected to the router Wireless Ethernet. At the present time, my mac is connected to the same router by ethernet. I just started the HP printer utility and printed page setup very well, showing the ink levels.

  I'm guessing that it is a problem of intellectual property, and that the HP printer utility uses a different protocol to connect to the printer. Yes?

  Fine, I can print from Windows 7 computer that is connected by ethernet on the same network. IP addresses are correctly reserved.

  Please, someone help. I have a forthcoming major surgery and won't be able to walk upstairs to the office, so I really want to be able to print wireless from below. I bet once wired print jobs, the wirelss go, too.

  Well well, thanks to the kind soul who wrote this:

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/duplex-printing-with-HP-OfficeJet-6500-wireless/m-p/129735#M3716

  (useful text cited below)

  You can also modify an existing printer driver:

  (1) system preferences > Print & Fax

  2) click your printer

  3) click on the Options button & supplies

  4) click on the driver tab at the top

  (5) in 'print using... '. "drop-down, choose Select printer software...

  (6) locate HP OfficeJet Pro L7700 in the list

  I followed the instructions to turn my printer OfficeJet OfficeJet Pro L7700 6500n driver. Let the JetDirect Protocol.

  Now I can print when connected to the Ether - and I can print duplex. AND I can print wireless.

  To sum up: If your print jobs stuck in the queue to print on a HP OfficeJet 6500n, but you can ping the printer or you connect via the HP printer utility, the following workaround solution:

  Change the IP to JetDirect Protocol

  Change the 6500n to OfficeJet Pro L7700 OfficeJet printer driver.

  SOLVED.

• Keeps print job stuck in the queue and is not over

  Mavericks OSX 10.9.2 running.  Whenever I have print the print job gets just stuck in the queue.  I already removed restart printer, uninstalled existing SW and downloaded and installed the current drivers and (v12.34.37) and always without success.

  Now my son also reports the same problem on his Macbook (I think it also unfolds 10.9.2.)

  Someone knows how to fix this?

  Hello MrRob,

  Sorry, you have problems with the printer queues.  I have a couple of things to do which should solve this problem quickly.

  The first is to reset the printing system.  This puts the system of Mac OS x to a default known good state.  This is a doc from Apple on how to do it.  http://support.apple.com/kb/PH14141.

  The second thing to do is to check/repair disk permissions.  I do this on a monthly basis and after each update.  Anytime something weird is happening, as a feature that allows to work is not, or the options are no longer available, etc..  I repaired disk permissions.  This is done via disk utility in the Applications/Utilities on your Mac folder.

  After doing both of those, restart your Mac and power cycle the printer, readd the printer to printers and Scanners and try again.

• printer crashes after printing 1-2... stuck in the queue of work

  Just installed HP printer and have a recurring issue.  I can send 1-3 print jobs to the printer and print correctly.  Then, the next task will be stuck in the queue and I can't remove it.  If I restart the computer, the print job goes through then the computer restarts... allowing me to print a few pages before it crashes again.  I tried the process step 10 HP to resolve problems printing, but in vain.  I am running Windows 7 and it's a HP LaserJet aio color 200 printer.  Using a USB connection.  Thanks in advance.

  I'm baaaack!

  I finally got this printer to work by uninstalling the software once again, then set up to work wireless.  Not sure if reloading is or if there is a problem with the USB cable...

• Printing HP Officejet Pro 8600 stuck in the queue - Wireless Intermittent

  We have a HP Officejet Pro 8600 (CM947A) that we used it for several years without problem.  I use the version of Windows 7 Professional 64-bit.  We have two PC that print wireless.  There were several days of work began to get stuck in the print queue of the printer for both PC to print.  I can cancel the printing of the queue, but the next task will be stuck again.  I print Microsoft Word documents contain a single sentence.  The problem goes away if I restart the printer, but the problem comes back the next morning.  I have re-installed the software print and changed the channel on the router on channel 8 that uses the null in the region.  The printer firmware is up-to-date.  The HP printing software and doctor Scan has not solved the problem. The indicator on the right side of the printer's pale blue wireless is enabled when the problem occurs.  When print jobs are stuck in the queue, I can not connect to the printer by typing the IP address in a browser window.

  This problem has been resolved by the above phone support number.  We have solved the problem by changing the encryption on the router to WPA2 to WPA + WPA2.   The router is a Belkin Wireless G Plus MIMO Router P57746-B.

• Jobs stuck in the queue on hp psc 1215.

  After crossing solutions 1 to 10 in "impossible to print. Jobs stuck in the queue", I have now lost my printer.  Tried shutting down, unplug all the cables for laptop & printer & re connected every 12 hours later. But no sign of the laptop to find the printer.

  Copier & scanning work ok & pressing the "Cancel and color" keys on the printer, I have a very good test print.

  Printer.  HP psc 1215 all-in-one & OS, Dell inspiron 1721.

  Eamon.

  Open Control Panel-> audio & -> printers-> add a printer-> add a local printer *-> use an existing Port-> select the manufacturer & model-> name of the printer of Type-> Views-> Refresh.  (This shows the icon of the printer).

  N/B:-* ignored this "use this option only if do not have a USB printer" & have chosen this option.

  Eamon

• I have a paper stuck in the queue that stops all the impressions

  I have a paper stuck in the queue that stops all prints! The status shows deleting, but nothing happens. I tried normal deletion methods, but it is always the point in the queue. All the other battery printing upward behind and unable to print. Help

  TerryPickett,

  Try to run delete print jobs to remove all print jobs stuck in the queue.

  Rick