my printer hp officejet pro 8600 n9911n series has a "ghost in the machine".
My printer HP Officejet Pro 8600 Premium position of outgoing fax, and then numbers appear, usually of 9 and 6 randomly. As soon as it starts, I can't abandon this process without turning off the printer. My firmware, drivers are all to date. It's maddening! Thank you for the help here!
Model number: N911n
Product number: CN577A
Thank you "Super Dave", just went down to thephone with technical support. We did together a semi hard reset. I hope that this solves the problem!
See you soon!
Tags: HP Printers
printing messages iPhone5 for printer HP Officejet Pro 8600 Plus
How to print on my printer HP Officejet Pro 8600 Plus my messages from my iPhone5
Printer HP Officejet Pro 8600 Plus supports AirPrint. Please see the following article:
I need a printer hp officejet pro 8600 for win2000 driver
Someone in the world has a print driver that works with a printer HP Officejet Pro 8600?
The Officejet Pro 8600 printer does not support Windows 2000. I'm sorry.
However, there may be a workaround solution. To clarify, I don't have a Windows 2000 system to test this with, and it can take a series of changes for the following steps to work with Windows 2000. You may need to find the equivalent Windows 2000 for this process steps/formulation as it was done using Windows 7 (the process must be the same).
It sounds weird, but the Deskjet 990c driver will work for the Officejet Pro 8600, and there's a Windows 2000 driver that is available for download. However, Windows Update already has this driver and it's easier to use it instead to extract the executable driver and ending.
Essentially, the printer must be added manually using the Deskjet 990c printer driver. There may be other resources out there, but I found none on the HP site for the use of this driver instead of the Oifficejet 8600 driver. This will give you only the printing features and nothing else. In addition, there may be problems printing since this isn't an official driver for Windows 2000 for the 8600 (I have not noticed any problems when I did a few test prints).
1. go where your printers are listed and select the option to add a printer.
2. Select the option to add a local printer (maybe it's a network printer in Windows 2000).
3. create a new Standard TCP/IP port.
4. Enter the address of the printer in the field IP address Ip or host name.
5. the selection of the pilot window should now be open. Click Windows update will complete the printer selection screen (may take several minutes using Windows Update). Select HP for the manufacturer and the printer Deskjet 990c for the printer.
6 the name of the printer. The default value will be the deskjet 990c since it is the driver used, but I recommend to name what the printer is so that we know what it is.
7. the sharing screen appears. If you share the printer, enter the appropriate information. Otherwise, click Next.
8. at this stage, the process could be completed. Print a test page to confirm functionality.
Printer HP Officejet Pro 8600 Plus works but the Scanner does not
I recently bought a Toshiba laptop with Windows 7 Home Premium operating system. My previous laptop is a Toshiba also upgraded to Windows 7 Home Premium operating system. I have a printer HP Officejet Pro 8600 more all-in-one printer. The printer/scanner works fine with my laptop more older but with the new laptop that I can't get to the printer. I am not able to get the scanner to work. I reloaded the software several times but the scanner still does not work. The scanner works fine with laptop more old, even if it has the same operating system. I get an error message that says "Scan of the computer is turned on. You can start a scan from the printer. Your computer is not listed as an available computer control panel of the printer. If please restart your printer and try again. "Can anyone help with this?
Even though I'm MVP I represent Microsoft or speak. If I can and will speak
as I think.
The proper functioning of the printer and Scanner is the direct responsibility of the producer of material
and no windows. There are hundreds of these devices that work correctly on Windows 7 if
those who don't have no drivers and other interfaces which are not compatible to Windows 7 should be
written correctly. Of course many older devices are not supported by their creators for later
Versions of Windows. Microsoft passes but does not write drivers and interfaces
Printers and Scanners need to function properly. So, the manufacturer and no one else, is totally
Manager to see if there are interfaces and appropriate drivers.
Many device makers do not write new drivers and interfaces for older hardware because either
they cannot support the new methods or because they want to sell new hardware.
Personally, I don't think that Microsoft is lying because they also say that device manufacturers have the
Omos unique to provide the necessary compatible drivers and interfaces.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
My new printer HP Officejet Pro 8600 causes my computer shuts down after 5 minutes.
My new printer HP Officejet Pro 8600 causes my computer shuts down after 5 minutes. Is there a way to find out why? Is it because I connected to a USB port rather than wireless and telephone connection.
Original title: computer spit
I called the store where I bought the printer. They suggested that I have download the latest driver
from the HP website. I did it and it seems to have solved the problem.
New HP OfficeJet Pro 8600 more - can I install and use the 2nd tray of my HP OfficeJet Pro 7700?
I would like to install the 2nd tray of my old HP Office Jet Pro 7700 under my new of OfficeJet Pro 8600. Can I do this?
The 2nd of the Officejet Pro 8600 paper tray is quite different from the 2nd series printers Officejet L7700 paper tray.
* The 2nd tray for L7700 series is compatible with: L7580, L7680, L7780, L7550, L7650, L7480, L7750, L7590 and L7555.
Click on the link provided here to access the HP Shopping site where you can buy the tray paper 8600 2nd. The current price is $79.99 usd.
HP Officejet Pro 6230: validation failed to print on printer HP Officejet Pro x 64 series
Why I get the message"Validation of the printer failure '? It worked very well, but as soon as my warranty expired, my printer isin can't work, not AT ALL.
I bought the new ink through the HP online store and it is unusable because of this problem of 'Validation '.
Can someone help me please?
HP Officejet Pro 6230 x Series
Service ID: 25077
Serial number: [personal information]
Firmware version: AGP1FN1423AR
I would uninstall all the software for the printer. Here is a document of support for reference, if needed - uninstalling the software of the printer (Windows).
Try using the HP printer installation wizard to install the software. This tool with to find the most recent version of the printer software and help with the installation.If it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.
Direct print wireless OfficeJet Pro 8600 s
Sales for OfficeJet Pro 8600 site clearly states that wireless direct printing is available on this model. It's not on mine. I don't have a menu direct HP wireless on my printer? What is going on?
Nevermind I figured it. Do you have a update online printer and wireless live is now enabled.
How to install printer HP Officejet Pro 8600 software more? Windows 7
How do we install printing to my HP Officejet Pro 8600 software more? I had trouble with the wireless connection, but that is fixed. The printer now shows the menu, but I can't find how and when to install the software. Thank you
Please visit this site to download the package of right of the printer and install it on your machine.
Cannot start "Printer Assistant" Officejet Pro 8600
The Printer Wizard and my 8600 worked well for over a year. Now, I can't start "printer Assistant". This may have been triggered by an 8.1 Win update. Others on the Discussion Board have said to uninstall all programs, HP, reboot and then download the package "full of features" on the HP site.
Everything I did. Installation works very well. Print, fax and scan all work very well during a test. A shortcut has been installed on the desktop. But I can't start the "printer Assistant", either in the upper part of the counter, the Start button, the program file.
I used the Trouble Shooter to try to find the problem. Since the troubleshooting I could open "Scan HP - HP Officejet Pro 8600". From there, I could launch a successful analysis. But the only way to this page that I found through the Trouble Shooter.
The Printer Wizard is loaded on my computer: worm 28.0.1315.0 file; 5.16 MB. Last updated on 17/10/12.
You have any ideas?
Thank you for your reply, I appreciate the clarification. I still think that the patch is a good idea to try.
If it still does not respond, try the following in the following order:
- Uninstall the software. Uninstalling the printer software.
- Clean boot the computer. How to perform a boot in Windows.
- Disable all antivirus programs. Turn Windows Defender on or off. (This works in Windows 8.1).
- Disable the firewall. Turn Windows Firewall on or off. (This works in Windows 8.1).
- Create a new user account. Create a user account.
- Re-install the software using the printer HP install wizard for Windows.
Hope this works for you and have a great day!
Duplex printing HP Officejet Pro 8600 using Mac OSX 10.7.5
I have OSX 10.7.5 and I recently purchased the Officejet Pro 8600. I noticed that when I choose to print from Firefox browser, I see the duplex printing option. I don't see this option when printing from Word, Excel or Adobe software.
Is selected in system preferences, then why can't two-sided printing from these applications?
I wanted to share what I found, in case someone else has the same questions (I got a quick help of Apple Support communities/forums). I don't know if this applies to versions of Microsoft office, but my key learning is that the checkbox will appear not at all for these programs. You will need to set by other means.
Go to the print dialog box
Choose the submenu "Layout" (I think that this menu by default to "Copies and Pages")
There is a "double" option, and choose 'off', "mandatory long edge" or "short edge binding.
Once I did this and the saved settings, he worked also for Excel and Adobe.
The only problem with Adobe, it's that you must follow these steps whenever you print. If I just hit print without following the steps below, it will not print duplex. The steps are on the following link.
I was expecting the same dialog box that is displayed on the browser also seems with my other apps, and this is not the case.
Printers HP Officejet Pro 8600 keeps going offline... but the menu of the printer says it's online
I had continual problems when you try to print to my HP Officejet Pro 8600. For example, when I try to print a word document, it indicates that the printer is offline. I checked the printer by clicking on "see what's printing section, and then click printer. When I view this screen, the printer offline is not checked. In addition, the printer screen is showing that the printer is online as well. I have a wireless connection and I am running Windows 8.1. Thanks in advance for your help.
Thank you for using the forum. You can try the following:
Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem
Hope that helps.
Beautiful copies. Print programs Officejet Pro 8600 N911a
Just ran 20 copies without any problem. When I try to print from Access, Word, Excel, etc. printer behaves as if it's going to print, but then displays the message 'Out of Paper '. Windows 7 64-bit. HP Officejet Pro 8600 N911a. Is about to resume
See if this troubleshooting article helps you resolve the problem you are experiencing.
' A ' Out of paper ' or 'Choose the motor at a standstill' Message is displayed and the product do not pick up or feeding the paper
Change the default print for all printing on OfficeJet Pro 8600 Plus
OfficeJet Pro 8600 more
10.8.3 OS iMac
I want to change the value print factory set in the default print setting. I want the documents I send to the printer via AirPrint to print in black and white, not color. But the 8600 by default is always color. Sometimes, I am able to change this setting for individual tasks, but sometimes I can't. I wish that the default to be always in black and white. Is this possible?
The steps above refer only to the Mac, indeed.
AirPrint provides all color configurations, but only allow printing in color... all available Airprint parameters are listed in the What are the printing options are available? section below:
You can install the HP ePrint app and print through it, like black and white, know that color options are available for the types of documents only (PDF, TXT, MS Office files, Web sites or email), but not for the types of photo files:
When you print envelopes Officejet Pro 8600
I replaced my set two Officejet 7410 due to age, with the top two Officejet Pro 8600. Default tray position #1 (above) works fine and prints the paper standard and photographic paper nicely. Lac #2 (bottom) may receive envelopes #10.
I use Win XP Pro service pack #3 and the suite MS Office (Word SP3) 2002. When I write a letter, it will be printed correctly in the default tray paper #1, Word allows you to go to the fall of the low 'TOOLS' to select "envelopes, their size, (#10), printing the job-oriented and if you want to add a postal bar code, and then you select the status bar (#2) and click on print.»
This is the problem, it is unable to select a #2 tray package, even after you ask him to take the envelope tray #2 (low) instead, it takes the default bin #1 a page and print the address on this subject information!
HP Tech support response was to "Exchange the trays' when printing envelopes! How lame is that? Over the years I owned the model 7410, I never been faced with this question...
Before buying the 8600, I asked him at dealerships and even supported HP, if the 8600 worked similarly to my 7410 loving... The consensus was Yes.
Which seems not to be true (at least for me). Please advise me how to solve this evolution very dissappointing. Thank you
Hello: Unfortunately this model does not support the envelopes from the T2, you can change your settings and load the envelopes in the Tray1 and the Plains media on tray 2,
Here is a link to the "user guide".
Please look at page 165, there is a table which shows all the formats supported by shelf support.Please indicate the position that solved your problem as "acceptable Solution".
I am employed by HP
Maybe you are looking for
Thunderbird will not email (after years of functioning), download says "connection was refused when attempting to contact direct mozillamessaging '.
When Thunderbird opens or when I click on "Get messages" I get a message that says: "the connection was refused when attempting to contact the living mozillamessaging.com ." This has happened only since 18/12/14 after working many years. I checked al
HP 10 G2: HP 10 G2 does not meet any stylus
Recently received a HP 10 G2 and noticed a few things right out of the box. The screen is completely insensitive to any type of pen. I have a variety due to the use of the tablets to sketch. Everyone knows this problem. I was sent a replacement and h
Satellite A500: When will be released Windows 7 64 bit drivers
Hello as the new owner of toshiba A500-132 immediately, I installed Windows 7 64 bit and I only just now realize there is still no driver for it.This is when they come out because I can't wait! and I refuse using vista! I installed most of the 64 bit
I am not able to download the drivers for Fluke 8846 IVI. Help, please.
I have a video performance and 3 separate video testimonials. I want to severate 4 videos in scenes in Win DVD maker. How can I do?
Help! Also, I made a blunder to the top and erased a video on the computer after that I put on a DVD and wound up the burned DVD. I having trouble getting the video from the DVD and then turn the computer so I can work with it.