My printer HP photosmart all-in-one installs on my computer windows 7

I tried installing this printer several times and tried a few ways to address compatibility issues and get installed it, but it stops at 1/4 on the way through the installation and it gives me this error message:
[this system does not meet one or more of the minimum requirements for the installation of this product. The installation cannot continue. ________
Requirement:
Operating system - information and advice:
The operating system on this computer is not supported. The installation cannot continue until this is resolved.

Current OS: 601.64

Supported: Windows 2000, Windows XP, Windows XP 64 bit, Vista, Vista 64-bit

Action required: click Cancel to exit this software installation. Install this product on a computer that is running one of the supported Microsoft operating systems or refer to your computer documentation for more information on the upgrade of the operating system of your computer.
_____________________________________________
Requirement:

Run as...
Details and advice:-
This software cannot be installed using the command "run under...". ». The installation cannot continue until it is resolved.

Action required: click Cancel to exit this software installation. Log out and log in as user administrator privleges. (Contact your system administrator for more information.) If there is no system administrator, ask the primary user of this computer installation software. [Restart the installation by removing and re - insert the installation CD].

Hate to be irreverent on the issue, but the error is already tell you the problem. Not having no other specifics on what printer you have it is hard to watch even if there is no option. However, there are probably not many, if any. You can check the HP Support to see if they have a Windows 7 driver for your printer. If they don't you won't be able to install it on Windows 7.

There is another option that could be useful to you, but if there are some expenses you will have to balance that and how much it would cost to get a new printer. If you have professional or ultimate edition and your hardware supports Hardware Assisted Virtualization (HAV) you can try XP mode... create a virtual machine that is running a full XP SP3. You will probably need to download XP drivers, but that shouldn't be a problem because your printer is certainly compatible with Windows XP. Windows Virtual PC will provide instructions, a HAV test application and all other downloads required for installing XP mode. Once XP mode is installed and running on your system, you simply need to install your printer under XP. This link will take you to a tutorial on loading USB devices and run in XP mode, to share with the host system Windows 7.

If you do not have the correct version of Windows, anytime upgrade to professional will run $ 90 (everything is free). However, before spending on the upgrade, run the test your HW to make sure that you support HAV. It is the second step of the instructions of Windows Virtual PC. No sense spending $90 if you can't run XP mode anyway. If your HW does not support you'd have to buy a new PC to get there... much more than a new printer.

If you do not support HAV but you really want to keep the printer, you can use VirtualBox.org for virtualization (free) and then load a full version of XP or Vista to create a virtual environment to load your printer. Here, the cost would be about as much as the cost of a new printer.

If you're not too attached to the printer, just buy a new. HP has some photosmart printers that include wireless conectivity and even use separate color cartridges. The latter is very nice as you accelerate rarely out of all colors simultaneously.

Tags: Windows

Similar Questions

  • HP PhotoSmart all-in-One Installer crashes in Windows 7 64 bit

    Downloaded PS_AIO_02_Net_Full_Win_WW_130_140.exe to support my HP Photosmart 7280 connected to the network printer/scanner on my PC running Windows 7 64 bit HP Pavilion HPE . Installation hangs with"control...". ». Patience is not the issue; 8 hours later, it is still "control system". ».

    TAKS Manager shows hpzsetup.exe HPZstub.exe and HPZwup01.exe running but never with CPU not null.

    Before that, the PC had been able to use the printer on the network to print very well with the help of the default driver, but I need to use the scanner, hence the need for the installation of the complete all-in-one software.

    A HP computer with an HP printer by using the latest version of the software downloaded freshly from the HP site: this should work out of the box. Someone please advise.

    Problem solved, but not the way everyone likes, because we know not the root cause. I did a reboot on the PC. After that, the all-in-one installer worked well. (I hate when that happens :-)

  • Wirth problem Scanner printer HP Photosmart all-in-one.

    How can I activate the scanner on my HP photosmart all-in - one printer?

    How can I activate the scanner on my Photosmart all-in-one printer?

  • black ink does not print HP Photosmart all-in-one

    I have new cartridges and after installation black will not print.  All other colors are pring.

    Hi Luv2dance728,

    Thanks for the reply and the information

    I suggest you start as a result of this document for Troubleshooting print quality problems, should be able to help you to get black ink works again. If it isn't, you can also try manually cleaning your print head to make sure there isn't a buildup preventing out black ink.

    If the printer still won't print black ink, it is perhaps an accumulation inside the print head or on the beak and to help solve this problem, you can follow the instructions in Bob_Headrick in this post on soak your printhead.

    If after these three things, black is not always print, it's a hardware problem with the printer print head and I suggest to call HP Support and inquire about their exchanges of and the trade program.

    Hope this helps, have a nice day!

  • How to print on a printer HP photosmart all-in-one C310 mirrored premiun?

    I want to print on paper photo transfer. People and landscapes are printed ok regularly, I'm the only one who will know that they are back when transferred to the fabric but words are a different story, so I would like to know if it is possible to print with this printer and how if it is mirror.

    According to Google's Picasa web guide, rotate the image (create a mirror image) to open an image in edit mode.  To flip the image, horizontally press Ctrl + Shift + H.  Rotate the image vertically pres Ctrl + Shift + V.  That's all you need to do to put an image in the mirror.  I hope this helps.

  • Printer HP Photosmart all in one printer scanner

    I can not get this camera to be my default printer.  It has been disconnected for a while and now has the yellow!.    I can get a different default printer but it is not what is wanted.

    Why do not all reinstall the printer?

    http://www.shopping.HP.com/en_US/Home-Office/-/products/printers/printers

    below is a link to hp support

  • Cannot connect HP printer photosmart all in one single 6510 with my windows 7 Home Edition PC

    Stuck!  Help, please.  I' ERVs uninstalled and reinstalled several times: restore PC previous working time. check all passwords and IP addresses.  Wireless network connection (group home) - says that it cannot connect to the top by evenb wireless, if it says printer is connected to the internet, as is the PC.  USB connection, it blocks on the drawing of the ethernet connection.  PC does not accept updates - they all fail.  Last week I had no such problems.  Rolfus

    FIXED!  Go back and do a «how to perform a clean boot in Windows»  Follow the prompts long enough and a bit complicated.  This will also solve the problems of a number of HP users with various issues.  Rolfus

  • Message says one of my ink cartridges printing HP Photosmart all-in-One is empty, without.

    Message says that it will only print in black.  The icon of the printer on my computer says printer is ready.  When I check the colors in my HP Solution Center on my computer, it displays the cartridge in question in the complete form.  Can I print in color of the scanner.

    You have a problem with HP software/hardware, contact HP:

    http://welcome.HP.com/country/us/en/contact_us.html

    Otherwise, try the Support Forums:

    http://h30434.www3.HP.com/

    See you soon.

    Mick Murphy - Microsoft partner

  • Printer HP Photosmart all-in-one, the box of Windows 7 lost my status of the printer at the bottom on the right

    Lost the small box at the bottom right which shows when printing to the printer.  When I send a job to the printer, it prints OK, but recently after some other printer problems (need new ink cartridge), the small boxdoes not displayed.  Because the printer is in another room, it's a good feature to have the work.

    Any suggestions?

    Hello

    Please try:

    Click Start > devices and printers.
    Click Print Server properties (in the box "toolbar" above the list of devices).
    Click the Advanced tab.
    In a local printing: check "Show notifications of information for local printers.

    Kind regards.

  • Printer HP Photosmart all-in-One 6515

    New desktop running Windows 7 computer does not list 6515 as an option to choose to connect. The only option that is close is 6520 series.  It works but when Windows Live Gallery opens import, scan option does not appear.

    -NO AVAILABLE SCAN!   What is going on?  No problem with the previous (old) computer.

    PLEASE ADVISE!  Thank you.

    Have you installed the software from here? If not, give it a try.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=5191794

    I hope this helps.

  • HP photosmart all-in-one C2780: installation problem

    I have a printer HP photosmart all-in-one C2780

    You download the software and drivers for this printer on HP site

    When I start the installation of the software from starting the program after that extraction does not work and a message appears saying:

    Microsoft Visual C++ Runtime Library

    Runtime error

    Program C\users\FALVES\Appdata\Local\Temp\7zS1B01\Setup.exe

    This application has requested the execution to terminate in an unusual way.

    For more information, contact the application support tema.

    I ask?

    How can I contact the Support team

    What's wrong

    How can I solve this problem

    Ok

    Knowing that you use antivirus software can help to understand it better, it will be great if you can clarify that.

    So, try the following steps in the meantime:

    1. Click on the Start menu and type %temp%
    2. Open the listed temp folder, and then open the HP folder that begins with 7z.
    3. Open the UTIL folder.
    4. Open the folder of the CCC.
    5. Double-click on the file Uninstall_L4.bat

    A prompt should appear and several unisntallers should run, if only a black window appears, click enter once.

    Follow the steps of screen on until the uninstall ask to reboot the PC.

    Reboot it and try to reinstall the software.

    If it persists, remember to specify accordingly.

    Shlomi

  • Photosmart all-in-one HP C4480: printer will not print. Incompatible ink cartridges

    My printer has suddenly stopped working, of course, comes "incompatible cartridge". For the next two weeks, I tried everything I know and everything that I could find (even the Forum Support HP's. I received a response from you, but it was a response to a problem that I didn't ask) now I'm in the never never land. This is the third set of cartridges that I have tried. They are all HP cartridges.  My computer is s3700f Slim line, my printer HP Photosmart all-in-one, C4480.     Thank you for any information you can help me on this aggravating problem.         Meiko

    Hello Meiko,

    Welcome to the HP Forums.

    I see that you have a problem with incompatible ink cartridges.

    Please click on the link following which treats a 'cartridge problem', "Incompatible cartridge" or "Cartridge missing or corrupted" Message is displayed on the computer or the printer control panel.

    If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 for all other regions: click here.

    Thanks for your time.

  • Photosmart all-in-One b210a: Black is not printing

    Hello world
    I have a problem with my printer, a Photosmart all-in-One b210a, connected wireless to my network. The problem occurs when printing: it seems that the printer doesn't print anything that uses the color black or black color itself.
    I tried to clean the print head and it only prints the other colors (one line). I tried also to change the ink cartridge, but nothing to do; I tried to align the cartridges aaaand it is said that the alignment is not (it only printed the blue lines) and everything in the Tools menu, but not reset the configuration.

    I also tried to print 10 Windows and OS X (a color and a black and white document). The same result at a time when black and white document printing: not black.

    Any ideas? Thank you.

    Alexander.

    Hi @AlexandrCerutti,

    Welcome to the Forums of HP Support!

    I understand you are having print quality problems on your HP Photosmart Wireless e-All-in-one printer - B210a

    Printer. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    Looks like you did most of the resolution of the problems already. The print head is probably clogged or will need to be replaced.

    NOTE: I would be cleaning several times to try to resolve the problem with the print head.

    Please confirm that you have tried the steps in this guide: HP Photosmart Plus B210 printer - color or black ink printing not.

    If the problem persists, the print head should be cleaned.

    Check the status of print head warranty:
    If you have a faulty cartridge or print head, it might be under warranty. To check the warranty on your ink supplies, go to tohp.com/go/learnaboutsupplies, select your country/region, and then review the information of limited warranty for your supplies.

    Printhead replacement games are available from HP customer or authorized service providers assistance.
    ATTENTION: Wait until you have a new available print head Assembly before you remove the ink cartridges. Do not leave the ink cartridges out of the printer longer than 30 minutes. Can result in damage to the printer and ink cartridges.

    If the printer is out of warranty, you can try the procedure in the video below. Please use at your own discretion.

    Video: Manually clean the print head on the HP Officejet 6500 printer

  • HP PSC 2410 Photosmart all-in-one compatibility issue with Windows 7

    My HP PSC 2410 Photosmart all-in-one does not work in Windows 7.  Said that there is a compatibility issue.  Can someone please?  Thank you!

    HI JourneysLady,

    I understand and would like to mention that as I said in pilots are a basis of drivers and they have the ability to print and you can scan through Microsoft Paint or scanner and camera, but would not be able to scan using any software complete features and driver software is required for this but unfortunately the full feature software and drivers is not available for the device that you use.

    --------------------------------------------------------------------------------------------------------------------------

    Please click on "CONGRATULATIONS" If the problem is resolved and you want to say thank YOU.

    ----------------------------------------------------------------------------------------------------------------------------------------------------------

    Although I am an employee of HP, I speak for me.

    ---------------------------------------------------------------------------------------------------------------------------

  • Not able to find driver Win 7 (64 bit) for printer "hp psc 2410 photosmart all-in-one. pls help

    While I insert the printer USB cable to the laptop, it runs the Windows Live Update automatically and fails in the final task, the installation of the driver. It says "hp psc 2400 series - has failed.

    Then I removed the USB cable, removed the device of "devices and printers", reboot the laptop and then tried to load the driver manually. But in the window "install print driver", I could not able to find the driver for my printer ' hp psc 2410 photosmart all-in-one ' for the operating system of Windows 7 Professional (64 bit) under the "HP" manufactured.

    Can someone help me get this printer driver to use the Win 7 (64-bit) operating system? Thank you.

    Thank you, Sean. It has not solved the problem. Instead, I got to know that this will work with the 'HP Deskjet 6980 series' pilot and his summer work after I chose that one through the configuration of the local printer.

Maybe you are looking for