my printer tells me to check my ink (color cartridge) but Istill get the same disorder. When Iput returns continuous blinking light.
my printer in a single hppsc1610all, keeps telling me to check my color cartridge, so I remove and reseating it still continue to do the same. I USE A NEW BASKET. THIS CAN BE CORRECTED? OR DO iBUY a NEW PRINTER? AND IF SO BUY A WIRELESS NETWORK?
Contact HP for help with this, as it is a hardware problem with the printer. It is not a problem of Windows, or Microsoft.
Tags: Windows
Similar Questions
-
I installed a new tricolor cartridge and it still gives me the same message. I am very frustrated at this point. He now will print mode reserve with the cartridge removed. Help, please! I bought the color printer to print in color!
Thank you
jdokos95
I enclose a link that might help you. Let me know how it goes.
Let me know how it goes.
-
Printer Lexmark Pro 200. Does not print the correct colors. I restarted my computer and the printer is off but get the same result.
Hello
- What were the changes made before the problem occurred?
You try to run this fix and check.
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
If above does not work, try contacting Lexmark support for assistance.
http://www1.Lexmark.com/en_US/global-services/customer-support-services/index.shtml
-
OUR HP PRINTER NAME IS J3608ALL ALL-IN-ONE HP OFFICEJET. PORT DOT4_001MODEL CB07QA. OUR OPERATING SYSTEM IS WINDOWS XP, IF THE NEW COLOR CARTRIDGE IS INSERTED IN THE PRINTER FOR HOW LONG TAKES IT FOR CARTRIDGE IS EMPTY. ALSO, PLEASE INFORM HOW MANY A4 PAGES CAN BE PRINTED NORMALLY WITH THIS CARTRIDGE.
Hello ImranNagoor
It depends on print quality settings what you use with the printer as well as other factors such as the HP cartridges. You can see the available black and tricolor cartridges available for Officejet J3608 at the following link, including the returns estimated for each Page. To use the least ink use quick project for a print quality.
HP Suresupply (Officejet J3608)
Also for more information about how we measure the ink Yield the article below.
-
true copy endorsed XP,
I have a laptop of 2005 which came with XP. I lent it to a parent and it came back up. I did a clean reinstall with XP and now Microsoft tells me I don't have a real copy endorsed XP, but it's the same copy supplied with the computer. Because if it can't get the bulk of the safety at work. That is what it is.Refer to this article to get tips on how to validate your copy of xp.
-
CS6 has stopped working when I try to print. I reinstalled CS6 but still has the same problim
CS6 has stopped working when I try to print. I reinstalled CS6 but still has the same problem. He seams to have started when I downloaded the ICC profile
reset your preferences-
Acrobat: https://forums.adobe.com/thread/1595848?start=0&tstart=0
Adobe media encoder: https://forums.adobe.com/thread/1713540
Legacy: http://helpx.adobe.com/after-effects/using/preferences.html
hearing: https://forums.adobe.com/thread/1079494
Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html
Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
InCopy: https://forums.adobe.com/thread/526990
InDesign: https://forums.adobe.com/thread/526990
Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
Photoshop: https://forums.adobe.com/thread/375776
Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html
First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
If that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall
-
I want to print my Bill, but I get the message that I'm not allowed? I just paid my creditcard dads
Hello
Did you follow: print a receipt of payment or invoice for your subscription to creative cloud ?
If problem persists, please contact customer service
Kind regards
Sheena
-
Printer copier scanner says check paper/ink cartridge
Printer HP PSC 1410 all-in-one will not print a lot of the time, and I wonder why. It usually prints a small black dot in the upper left corner of the document and then says check paper/ink cartridge. I have paper in there, and I was just buying ink. It will even scan and copy something and print it, but when I want to print a document from the computer, it does not work. any help?
Hello
1. do you get an error message when you try to print?
2. what operating system is installed on your computer?I suggest that you follow the steps in this article and check to see if they help.
-
I have a Brother printer. I have a lot of black ink, but am very low on color. The printer always tells me that I can not print even if I press the black and do not want to use black to print a document of law. Is there a way to get around this?
You must ask brother if this is possible or not.
-
V313 detects no ink color cartridge
Greetings! My V313 just started telling me that my color ink is low and the cartridge needs to be replaced. I just put a new cartridge in 3 days ago, it printed very well then, and I barely used it. I put in another cartridge new, unused and the V313 told me that it is low on ink as well. I tried to pint in black only (another new cartridge), but simply of gives me the message "low ink color" and do not print. I lived on the website instructions troubleshooting Dell; and I reset the printer nothing helps. Of course, I checked both cartridges to ensure that all packaging had been abducted and that they were correctly statelye.
Why the V313 does think that the ink cartridge is low when it is not? Thanks for any help.
Mike,
You can have a cartridge with a bad sensor. You can try a replacement, it may or may not work. I've heard of some members that some generic brands work, but I don't post brand names, in the case ethey do not work, so nobody can say I said it worked.
I tried the cartridges refilled in the past and the print quality was not as good as expected. I'm trying generally to buy cartridges high capacity Dell series and they last a long time, for only a few dollars more.
Rick
-
I have a new color cartridge, but the printer will only print b/w
Original title: printer
My color cartridge was low so I replaced my color cartridge. Although even I have a new color cartridge in my printer does not print in color.
Hi Paulawagner,
· What operating system is installed on your computer?
· What is the brand and model of the printer?
· Did you do changes on the computer before the show?
Please answer the following questions so that we offer in addition to the steps to solve the problem of troubleshooting.
First of all, make sure that the color cartridge/toner is not empty or blocked.
You may have accidentally changed the print options that caused the problem.
Check out the following articles for more information about changing the printing options, printing a photo, etc.:
Print a photo
http://Windows.Microsoft.com/en-us/Windows7/print-a-picture
Choose printing options
http://Windows.Microsoft.com/en-us/Windows7/choosing-print-options
I hope this helps.
-
So I try to reinstall a printer on a computer and I get the message that the printer cannot be installed and the environment specified is not valid. It was working a week ago and now it is not. The printer has already been uninstalled, so I'm stumped. Any help would be appreciated.
Printer is HP Laserjet 1020
Hi miket219
I suggest refer you to the below provided the link and download the latest drivers available for Windows XP on the Web site. Check that if the installation of the last driver put up-to-date helps you solve the problem-I hope this helps.
-
Ink color cartridge not detected
Pls can some1 help me out here?
My printer (hp deskjet 2050)
stopped to dictate "color ink.
cartridge. Same nine.
He accepts and prints black only. I have
feel its slot of ink cartridge on the printer.
Pls how can I change / den
It?Hi @AKWUDERAJA,
Welcome to the HP Forums!
I noticed that your color ink cartridge is not detected with your HP Deskjet 2050 printer, and I'm happy to help you!
Please take a look through these guides:
- "Incompatible print cartridge" or "Print cartridge problem" Message appears on the computer or the printer control panel.
- Solve the problems of print quality for the printer HP Deskjet 1050, 1050 A, 2050 and 2050 all-in - One Printer Series.
If these guides do not help, then please call our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.
Hope this information is useful and thanks for posting!
-
I had to reinstall windows 7 a failure and now I can't print sever system.
I have an epson 1160 printer connected via USB cable and is installed according to the instructions in connecting it and let windows do its thing. It is set as the default printer.
Whenever I try to print from office 2010 for example, I get the message saying unable to print because no printer is installed. I reinstalled several times, checked the settings and still nothing. Can anyone help please.
Hello
I suggest to download and install drivers from the following link and check.
http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=14436&infoType=downloads
-
If I always try sharing printer on another computer error and get the massage "this operation has been cancelled due to restrictions in effect on this computer"., I have so confiuse and little dizzy... What can I do to solve this problem
Hi Miknugraha,
Welcome to the Microsoft Community and thanks for posting the question.
According to the description provided, its looks like you are unable to share the printer, it would be great if you can answer these questions to help you further.
1. have you made changes on the computer before this problem?
2. is it a security software installed on your computer?
I suggest you to see the steps in the following Microsoft article:
How to use Windows XP to share a printer with other people on your network: http://technet.microsoft.com/en-us/library/bb457001.aspx
If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
Maybe you are looking for
-
How to change the language of the operating system?
I know it's really a silly question, but my lap top is the Spain and won't let me change the language to English. Does anyone know how to do? I tried the obvious way, but it still doesn't work. I get a cd of English restoration? or is it a lot more s
-
Hello Can someone tell me how to program to predefine preplot lines that appear as an attachment. Such that the top line is upper limit, and the bottom line is the lower limit. And midline of the actual data which, being to draw. Thus, the top and
-
time and date of the waste of time
my clock will not keep at the right moment and date.tried reset several times, without success, someone can help.
-
Why some programs only list their size to uninstall
There are many programs listed under "Uninstall" that are not its size, why
-
Line opacity on Clip Glitch?
Hi, I'm trying to figure if I have a small problem or if I'm just something stupid. The opacity on my video clips line moves to the middle of the clip and allow me to move or add keyframes. Normally it is at the top and I can add keyframes in the tim