My product key of windows xp home edition does not work?

Similar Questions

• Driver Ethernet for Windows XP Home edition does not work on Satellite A100

  Satellite A100-784 PSAANE-02L011G3 ethernet driver for Windows XP Home Edition does not work. Cannot successfully install driver, downloaded all the drivers and still does not.

  As a sign of Device Manager yellow. I bought my laptop with Vista BASIC and I put XP - SP2. Country is Croatia! Help me please!

  Hello

  I can't believe that you are not able to install the LAN on this Satellite A100 driver!

  However, the satellite A100-784 supports a chip 82562GZ Intel 10/100 Mbit (Ekron) of Lan.

  If you want you can download and install page Intel network driver:

  http://Downloadcenter.Intel.com/Product_Filter.aspx?ProductID=999&lang=eng

  You will find the drivers Intel 8256 x Ethernet controllers

  Good bye

• Satellite Pro S300-11Y - downgrade from Windows XP Home edition does not work

  Hello

  I have a SAT PRO S300-11 since January 2009. It came with CD to downgrade to Windows XP, and I did several times over the years without any problem. But now I do and what finish to downgrade, when done last reset, windows starts to have problems and doesn t work.

  But if I do not the last reset on arrival of the downgrade the machine works perfectly, but when I do reboot then when windows starts it works. I try 5 times and still the same. I come back to windows original vista (I did CD to do) and it happens the same problem.

  Any help greatly appreciated,
  Thank you and sorry for my bad English.,.

  Jordi

  My English is not so perfect, but to be honest, I don't understand you.
  Do you mean by reset? Do you mean, finally, restart?

  By default the BIOS settings and try to reinstall Windows XP Home edition recovery image.

• Satellite L450D - 13 X - audio driver Windows XP Home edition does not work

  Hello

  I have a Satellite L450D-13 X, who was on Windows 7 64 bit, but I just put XP on it, hoping for better game performance.
  I downloaded all the drivers XP Toshibas and all seem to work except the sound. I've been following discussions about this anywhere and try some of the suggestions that end up being for a slightly different model, but nothing will do.

  Help, please.

  What exactly is the problem?
  Sound card is properly installed in the Device Manager?
  What version of Windows is installed (SP2 or SP3)?

• The product key on my Satellite Pro P300 does not work

  The product key on my Satellite Pro P300 does not work.
  I entered the key from the sticker on the back of the computer. What I am doing wrong?

  Hello

  Why use this product key?

  Firstly the Toshiba recovery image is already enabled and you don t need this key more activations.

  Second, it's an OEM key and it will not work with other versions of Vista!

  Cheers mate

• How can I get my number and product key for windows xp home edition 2? ___

  my mother-in-law is trying to reinstall windows xp home edition 2, but does not have its product number or key... How can I find out who it is?

  Thank you very much!

  What brand is the PC?  Most system builders put the key on the side of the Machine.  If it's a laptop, it should be on the bottom of the laptop.

  It is all the information that we will be able to give you.  If you are unable to find the key, then you will need to purchase a new license.

  Serving the community a computer at once [link to paid support not allowed in this forum] Please post a reply to let us know whether or not our response helped.

• Satellite C660-108 - Windows XP Home Edition does not install

  I try to install Windows XP Home Edition on a Toshiba Satellite C660-108, without success.

  I changed the BIOS disk in "Compatibility" mode (what is the same thing as "Legacy IDE"?) by following the instructions on a Yahoo Answers question on the same issue.

  What has improved the situation, in what I now get an error message a few minutes after installing XP said "Starting Windows" instead of immediately after. The error message is the same that I have already received and is as follows:

  "A problem has been detected and windows has shut down to prevent damage to your computer...". "Technical information: * STOP: 0x0000007B (0xF78D663C, 0xC0000034, 0x00000000, 0x00000000).

  Thanks in advance for any help,

  Luke

  PS - I'm a mac user and do not have much experience in the use of Windows laptops, so I need instructions spelled out clearly enough if possible.

  The error could be related to drive HARD and the setting in the BIOS of the controller...
  Probably, you need to install Win XP using SATA AHCI mode and to add the driver SATA as described here:

  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm
  http://APS2.toshiba-tro.de/KB0/SPD4603LT0000R01.htm

  I found a similar description in the MS forum:
  http://answers.Microsoft.com/en-us/w...4b511ed?auth=1

• Windows XP Home Edition does not load in any mode after reboot to uninstall Norton

  I wanted to get rid of Norton anti-virus, then, I have downloaded and run the Norton Uninstaller. After what seemed an eternity he finished and asked me to restart the computer to complete the uninstalation. I clicked the botton "Restart now" and after the screen, which shows the bios is nothing. No loading screen, no beeps or anything else, just black. In addition, it does the same thing in all modes.

  I removed the HDD and an IDE to USB for connecting to my mobile backup (Win7 Ultimate) and performed a virus with TrendMicro Titanium antivirus scan + and scan with malewarebytes paid version maleware. No virus or maleware found. So, I ran a check/repair through backup with no found error disc.

  I do not have a XP or 7 CD repair/install, nor am I money right now. I really need to get going again.

  Infected computer:

  Compaq Presario M2000

  Windows XP Home Edition SP3

  Processor Intel Centrino Pentium M 1.5 GHz

  1 GB of RAM

  Intel Extreme Graphics 2

  Machine backup:

  Dell Inspiron 1501

  Windows 7 Ultimate Edition SP2

  AMD Turion 64 MK - 36 2.0 GHz

  3 GB RAM

  Integrated ATI Radeon Xpress 1150

  Looks like you somehow corrupted the bootloader.

  If I'm not mistaken, you can technically download disc for Microsoft Windows XP SP3 OEM HOME legally, as long as you use your current license.

  You can also communicate with Compaq and request a repair disk.

• Windows XP Home Edition does not start: System Configuration Error Code purple?

  I ran recently on my Windows XP Home Edition SP3 computer system recovery and once the recovery is finished I rebooted the system and then this message and I'm stuck here.

  I don't have any disc that came with the computer because it was very long ago already. I tried to download the 'Home Edition Set Up disk for Floppy Boot Installation of Windows XP"Microsoft, but I can't launch the ff:

  Windows XP Home Edition
  Windows XP Home Edition SP1
  Windows XP Home Edition SP2

  I can't create the configuration of disk for home edition, SP1, and SP2 because this computer I use currently is a 64 bit and no floppy drive. That's why I downloaded this instead:

  Windows XP Service Pack 3 - file to Image CD ISO-9660

  From:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=2fcde6ce-b5fb-4488-8c50-fe22559d164e&displaylang=en

  I burned a DVD ROM, but I don't know what to do next. After burning, I reinserted the disc to your computer from the active autorun. Then I inserted the disc for my Windows XP that has "System Configuration Error" and I tried to restart it but theres just no autoplay or anything that the computer always crosses the "System Configuration Error" message and I don't know how to access the set up disc. What should I do? Help please... :(

  Hello

  Try the methods listed in the section below and check.
  How to resolve configuration errors by using the System Configuration utility in Windows XP
  http://support.Microsoft.com/kb/310560

  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• See 4.6 Client installed on Windows 7 Home edition does not connect to the Manager

  Dear friends,

  I just joined this communitity, need help with a small problem of debugging that arrested me in the track.

  I recenty view upgrade 4.5 to 4.6 view, upgrade some services don't prevent not problems, but I have overcome by reading the blogs on the internet. After the upgarde I can't connect to connection Manager from the view of my Client to view 4.6 - Vesrion - 4.6.0 366101. Only thing I can think that my view client 4.6 is installed on Windows 7 Home Edition. But I had no problem connecting to the connection manager when I saw 4.5 client installed on the same workstation.

  Any help will be much appreciated...

  In VMware View Administrator go to

  Display Configuration > servers > discovers the connection to the server > edit.

  Uncheck the box for «use a tunnel connection is secure on the desktop»

  then restart the view connection server service

• Windows 7 starter edition does not work with Java 7 (unable to load the chat room) how to fix?

  Hello

  I have Windows 7 edition - starter and Java 7 when I try to use a school chatrooom - java won't load properly - tech school says it's because Windows 7 does not support Java 7 - any ideas on how to fix?
  THX,
  Maja

  If he believes that the school needs to get a new technology.

  To check if the problem is that the cat does not work with Java 7, uninstall Java 7 and install Java JRE 6 from here:

  http://www.Oracle.com/technetwork/Java/javase/downloads/index.html

  You must specify the exact error messages see you or post links on the screenshots so that your problem can be better understood.

• Basic purchase of product key for Windows 7 Home Edition

  I would like to install Windows 7 Home Basic Edition in my Netbook. I can't find a link to download/buy at the Microsoft Web site. Can I just install my drive friends without entering a product key, then buy the product key after installation?

  Or Microsoft stops selling Windows 7?

  MS stopped selling win7 with the introduction of win8

  You need a legal version to a third party, original sales site, try Amazon.com

  I guess that your netbook supports win7, check that the makers site they provide drivers win7

• Windows XP Home edition does not charge up - screen Toshiba and then nothing

  I opened my computer to stand by earlier. And received an error message such as:

  WINDOWS CANNOT CONTINUE RUNNING BECAUSE THE FILE IS DAMAGED AND UNREADABLE...
  Then he had a countdown until it restarted. After the computer restarted (loads of screen toshiba upwards) then nothing happends. I managed to get into the safe mode start page, but when I select start in safe mode, it does nothing, actually freezes. Seems that the problem is with XP.

  I also tried to "last good configuration" but who also refuses to load.
  I can, however, in the BIOS.

  The black and white background writes startup screen that flashes briefly upward when after that the toshiba screen doesn't even come to the top.

  I have a P100-429 Satilite using XP SP2 (or 3) does not remember.

  Is this a hardware problem? I lose data?

  I am aware that my system was clean and I was using a good anti-virus.

  Please please let me know if you have any suggestions or comments.

  Thanks in advance, Max...

  Hi RisSsky,

  you are in a deep deep sh... t... No. not really...
  Looks like the filestructure hard disk is damaged.
  the hard drive is recognized by the bios? means, it is listed as a device?
  There is a sound of the hard drive? scratch or buzzing or ticking?

  CHKDSK may help, but I would 'safe mode' where you want not to lose data on disk.

  don't panik, we will do things.

  2 options to solve this problem:
  the first and save:
  -Remove the old hdd (you need later)
  -get a new hard drive and make a recovery/installation on the new drive.
  -also get a usb - hdd connector to access old data hdd and copy on the new disk.
  or the 2nd:
  -run chkdsk on your hard drive, maybe you need to do this with a "live-system-on-cd.
  Be aware that if there is a problem it will get worse...
  -start in safe mode

  If you're lucky, the 2nd option will do.
  as said before I'd do it "the safe way.

• Windows 7 Home Premium - "does not work Windows genuine" pop up

  My Windows 7 Home Premium has been installed, activated and working perfectly for the past 18 months. I've been on the last few days PF, make popup windows telling me "this computer is not running genuine Windows" (0x8004fe21). This is obviously false because I bought the upgrade directly from Microsoft in November 2011 and it has been fine.

  When I click "Pay online now", the Microsoft site runs a quick scan and then points me to a download page of Windows 7 for £75.

  I have already tried to get the license key, restart the laptop, launching an update of Windows and reboot again - all to nothing does and I still get seriously irritating popup.

  Any ideas why this has suddenly started happening and how to fix it?

  Any suggestions gratefully thanks received.

  Try to activate Windows 7 by phone, post back with the results.

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  J W Stuart: http://www.pagestart.com

• Windows XP Home edition does not recognize new HDD on the Qosmio G20

  I have a Qosmio G20/390LS bought a year ago, when I worked at the Japan, I tried to upgrade the hard drive with a new HD 100 GB Hitachi SATA but I faced a problem that XP does not recognize the HD.
  For your reference, the Bios sees the new HD, when I install the XP operating system I load the driver downloaded from the Toshiba Web site but no way RAID with F6... XP does not recognize the HD.

  Do you have any idea how to fix?
  Thank you

  Hello

  Computers portable Japanese are unknown to me, but if this laptop comes with two hard drives and RAID option do not forget the good option is set in the BIOS. Without the right BIOS setting you will not be able to install the OS.

  On Qosmio G30, I was able to install Vista when for two HDD HARD drive settings were 0-RAID-1. Check it please and let us know.