my professional qxdm has stopped working. An error message that indicates a problem caused program stop working correctly.

Recently, I activated my qxdm but after some time it stopped working. It gives the error message as mentioned by me above. Please help me to solve the problem as soon as possible.

Thank you

Hello

I suggest you ask the Qxdm support professional for assistance.
QxDM Professional®
Hope this information helps.

Tags: Windows

Similar Questions

  • I am able to get a local connection... but an error message that indicates a problem with the ping with the host?

    Hello.. I tried all of the fixes recommended to connect to the internet, but I still receive a message that the host does not respond? I have a strong signal and "local". Thoughts?

    Hello

    1. what difficulties have tried?

    Follow these steps and check if that helps.

    Step 1:

    Configure the connection to obtain an IP address automatically

     
    a. click "Start", enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
    b. right-click on the network connection, and then click "Properties".
     
    If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    c. click Select 'Protocol Version 6 (TCP/IPv6) Internet' and then click 'properties '.
    d. check "obtain an IP address automatically" and "Obtain DNS server address automatically".
    e. click 'OK '.
    f. click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
    g. check "obtain an IP address automatically" and "Obtain DNS server address automatically".
    h. click on 'OK '.
    i. restart the computer.

    Step 2:


    If it works, you could do an ipconfig/flushdns
     
    a. Open command prompt.
    b. type: ipconfig/flushdns

    Note:

    * To open a command prompt, click Start, point to programs, point to Accessories and then click command prompt. If you are prompted for the administrator password, type administrator password
    * To view the complete syntax for this command, at a command prompt, type:
    ipconfig/Help
    * The command ipconfig /flushdns gives you a way to clear and reset the contents of the cache of DNS client resolution. During DNS troubleshooting, if necessary, you can use this procedure to remove negative cache entries from the cache, as well as all other entries that are added dynamically.
    Resetting the cache does not eliminate entries that are preloaded in the local Hosts file. To remove these entries from the cache, remove them from this file.

    Step 3:

    Reset TCP/IP and check if the problem persists.

    How to reset the Protocol Internet (TCP/IP)
    http://support.Microsoft.com/kb/299357

    Step 4:

    Test in safe mode with networkproblem.

  • When Skype attempts to run an error message comes saying "a problem caused this program to stop working correctly. Windows will close the program and notify you if a solution is available.

    Windows will close the program and notify you if a solution is available"is the latest version of Skype 5.3... Initially it was working fine but now I'm not able to download same Skype server. the same error appears saying that windows cannot download server.

    Hello

    read this:

    http://www.Skype.com/intl/en/welcomeback/

    System update A small number of Skype clients have problems using Skype. For more about the system status and solutions, visit Skype Heartbeat.

    http://heartbeat.Skype.com/

    Skype INTERNET phone service says a small percentage of its 170 million users have not not connect to its service, a problem that he is expected to be fixed with a software update.

    Skype said on its Internet site the problem resulted from the corrupted data that affects computers using the operating systems Windows, Linux or Macintosh.

    He has published a new version of Skype for Windows late Thursday to deal with the issue, said the company, which is based in the Luxembourg.

    He has released a version for Mac.

    Linux users have been told to delete a file manually.

    Skype said people using its services on mobile phones, TVs or other appliances are not affected.

    _________________________________________________________

    If before is not the issue, repost in Skype forums

    http://Forum.Skype.com/

  • OSB console error messages: how to see the cause of the error

    Some of the error messages from the OSB, like the one below

    BEA-382612
    : Error to prepare the message for shipping
    Description
    A runtime exception has occurred during the preparation of the message out for the routing node. This occurred due to an error during the execution of the actions of the node routing request. There should be a specific error message that will point the cause of the problem

    How to view the cause of the error, such as described in the "BOLD" above. I'm not on the console when an error occurs.

    THX
    Ashwani

    Published by: Ashwani Kalra January 16, 2012 16:27

    Try to keep track of the message in the test console. Change the server debug logging level to see more debugging messages. Enable tracing in an operational framework of the proxy service and business.

    Most likely your proxy is not able to find the business service to route the message and it is why throw above mentioned error.

    Kind regards
    Anuj

  • I get messages that support and problems Windows has stopped working. and also that I have no more memory on line 2. What can I do to fix this?

    I get messages that support and problems Windows has stopped working.  I told myself that I will advise if a solution is found, I get another box saying that I have to close becausse that Windows does not work.  I also get messages that I have not more memory on line 2.  What can I do to fix this?

    Hello

    1. could you give us the exact error message?
    2. Once you get this error message? This is when using Internet Explorer?

    In the meantime, check out the articles below and check. Try to increase the size of pagefile.sys and check.
    http://support.Microsoft.com/kb/2267427

    I hope this helps.

  • at startup I get the error message that the gamevance.exe stop working

    original title: gamevance.exe for vista

    at startup I get the error message that the gamevance.exe stop working, I went to start to delete, but do not have the option to remove it.

    Hi JoAnneKimmey and pugmolly,

    When looking for this, it seems to be malware, so I'll include a link to a useful thread in which you can find a solution:

    How to get rid of malware

  • Windows gives me an error message that the selected drive has been "marked as potentially damaged - check disk before use as back up.

    I am trying to set up a window to the top-

    -follow the instructions of top to select a backup disk - I did
    -Windows gives me an error message that the selected drive has been "marked as potentially damaged - check disk before use as back up.
    -in the past, this disc has been used ONLY as a backup disk
    -When you try to check (after Windows links) a message tells me the drive cannot be checked while it works - I have no problem with understanding that.
    -I wonder so I wish "disassemble this first volume" - "... all handles opened to this volume will become invalid..."
    -Do not understand what was required - and having no idea of the consequences (the disc 'way up', and what happens to the invalidated handles?) I replied "Cancel".
    -l' screen after you ask then if I want to check for errors at the next startup of my computer - I clicked on the button "schedule disk check.
    -When I started my computer nothing happened - what happened to "schedule disk check? How can I check the disc when firstly, it seems to be 'in service', but is only a backup to disk, and I thought that it only came into use when the reverse began to run?
    (I also tried to leave a message on one of the FAQ pages on back ups, but it appears that the number of characters is set to limit so low that you can't describe why the FAQ response is considered to be "not useful"
     
     
    Original title: Back Up system - disk and check

    Since this is a secondary drive chkdsk/r can be run without having to reboot.   Close all the programs that can access training and and when you run chkdsk say yes to "remove this volume first...". ».  This will cause no harm.  Although not strictly necessary, I recommend you to reboot once completed the disk check.   This will solve any problem related to the file handles.
    If chkdsk/r reports bad sectors, you should replace the disk.

  • Computer stops with an error message that he was arrested for environmental safety and of him having served

    my computer guard stop after about 15-20 minutes when I turn it back on I get an error message that says: it was closed for the safety of the environment and of him having served. I got servised at least 4 times and it still has the same problem after a few months.

    If its still under warranty take it back. Tell them to fix it properly. Or replace

  • I am a student and I have a free subscription to adobe (who, when I go into my membership, says I have free membership of Creative Cloud) again, when I try and download the Adobe Photoshop CC 2015, it gives me an error message that my trial has expired an

    I am a student and I have a free subscription to adobe (who, when I go into my membership, says I have free membership of Creative Cloud) again, when I try and download the Adobe Photoshop CC 2015, it gives me an error message that my trial has expired and then heading to an error 'No subscription found' when I type in my ID. My other updates for the applications worked and they open yet Photoshop is not.

    Hello

    Free trials of Adobe are for 30 days by app and it's clean and not mail electronic id specific, which means that if anyone with any email used Photoshop test on your machine, then it won't work not it will show you that the trial is expired.

    But if you think that this is the first trial for Photoshop has been downloaded on this machine and is not expired, please see the links below:

    Adobe trial software has expired at the beginning

    Please HELP in "Trial Expired" is anyway to reset my account so I can reuse them?

    Let us know if that helps.

    Kind regards

    Bani

  • Got an error message that says C:/WINDOWS/SYSTEM32/CONFIG/SYSTEM has been corrupted

    I've recently updated to WINDOWS XP Pro SP3.  Thursday morning, when I tried to boot my pc, I got an error message that says C:/WINDOWS/SYSTEM32/CONFIG/SYSTEM has been corrupted.  I've ever seen at the windows startup screen.  What can I do?

    * original title - I got an error message that says C:/WINDOWS/SYSTEM32/CONFIG/SYSTEM has been corrupted. What can I do? *

    System 32 system config is missing or currupt

    How to recover a corrupted registry that prevents Windows XP startup
    http://support.Microsoft.com/kb/307545

    Install and use the Recovery Console in Windows XP
    http://support.Microsoft.com/kb/307654

    See also

    How to Troubleshoot Registry Corruption issues
    http://support.Microsoft.com/kb/822705

    How to fix a missing or corrupt Windows\System32\Config\System file
    http://xphelpandsupport.MVPs.org/how_do_i_repair_a_missing_or_cor1.htm

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • Whenever I do a right click on a file I get the error message that Windows Explorer has a problem and needs to close

    original title: problems of files

    Whenever I do a right click on a file I get the error message that Windows Explorer has a problem and needs to close.

    Sometimes, the problem is caused by a third-party extension. ShellExView can be useful to see what shell extensions have been introduced in the Explorer. Lire read on this topic, then scroll down to download the x 86 (32-bit) or x 64 (64 - bit) version here near http://www.nirsoft.net/utils/shexview.html

    When you run it, click the column of company for sequence entries in alphabetical order. Suppose Microsoft entries are in good faith and focus on others. Is something listed that is useless or unknown? If so, select it and click the Red (on top left) task to turn it off. You can find more easy to disable them all and then reactivate (green area) one at a time and Explorer of execution until the culprit is found.

  • When I try to open the Task Manager, I got an error message that says that it has been disabled by the administrator. How to enable Task Manager?

    original title: whenever I try to open the Task Manager, I get an error message that says that it has been disabled by the administrator.  But I never turned it off.  How to enable Task Manager?

    How to enable Task Manager?

    Try the solution in one of these KB articles:

    "Task manager has been disabled by your administrator error.
      <>http://support.Microsoft.com/kb/555546 >
      <>http://support.Microsoft.com/kb/555480 >

    HTH,
    JW

  • Several installed programs give me error messages that they cannot work properly because I'm not the administrator

    original title: Administrator status

    Several installed programs give me error messages that they cannot work properly because I'm not the administrator.  I double checked with control panel to change my status and I AM ADMINISTRATOR. What is the problem and how to fix this?

    Several installed programs give me error messages that they cannot work properly because I'm not the administrator.  I double checked with control panel to change my status and I AM ADMINISTRATOR. What is the problem and how to fix this?

    Hey Honeybe2

    When you want to use the right click on it and run as administrator

    Walter, the time zone traveller

  • Installation 6 Lightroom from a disk and get an error message that says OS not met obligation / no support for Windows Vista.  Vista has never been loaded on this PC.  It is running Win7

    What installation Lr 6 to a disc, I get an error message that says OS obligation has not met.  Windows Vista not supported.  Vista has never been installed on this PC.  Operating system is Windows 7.  What now?

    Copy the installation files to a desktop directory.

    Right-click on the Setup file in this directory > click Properties > compatibility > win 7 > ok: Finally, double-click the configuration file.

  • I have the first Pro 2015 but when I try to open a project that has been registered with the Premier Pro 2015 on another machine I get an error message that says that the project has been saved with the latest version.  Help!

    I have the first Pro 2015 but when I try to open a project that has been registered with the Premier Pro 2015 on another machine I get an error message that says that the project has been saved with the latest version.  Help!

    It seems that your version is not the latest.

    Check help / about... what version it reads.

    It should be 2015. (9.2.0 build 41)

    Otherwise, please update your version via app updates... or cloud in respect of aid.

Maybe you are looking for

  • SSD not included does not in disk utility

    I have Macbook Pro 2014. during the day something happened where I got a folder flashing with the? Select this option. He held the repair shop and they said the hard drive was completely gone. O bytes of data. Instead of paying $150 for them to repla

  • I recorded the wrong number and I cannot remove it.

    Hi all I signed recently a number in Skype to Go, which is the number of mobile phone of my boss (I thought I'd save the number I wanted to call, not my own number). It is the Canada and I'm at the Chile. I can't delete his number to record my own nu

  • Full screen does not work when watching video clips of type 'tube '.

    When I look at a tube clip video (You Tube, etc.), the function full screen gives me just a white screen but I can hear the clip still running. When I reduce the screen to normal size, all right. This problem started recently. During the last many ye

  • How to take courses online on the Flyers.

    Original title: Flyers I have Windows 7 and Microsoft 2003.  I like to make flyers for various events using clip art and graphics online in our community of retirement but as Learn tips, ideas, etc., in order to improve my work.  Does anyone have any

  • How to determine the server message on existing unity store

    I have an existing unit with a separate message store. The recovery of message for the voicemails stored user is about 5 to 8 seconds. This just started happening. How can I determine which server has the message store and what could cause me behind?