My project will not move past slide 7. I created a new project using a ppt presentation and the porject won't move past slide 7 even in preview. Help?
My project will not move past slide 7. I created a new project using a ppt presentation and the porject won't move past slide 7 even in preview. Help?
I was pulling the presentation ppt to a network drive, so he didn't fully assume. I saved the presentation on my desk and imported again and it worked fine.
Tags: Adobe Captivate
Similar Questions
-
I work in a sensitive project where I have a specific slide which will not move forward. I created a click box that goes to the next slide, and it remains in the same blade if it is in a loop. Very strange. What might be missing?
You can check the Advanced Interaction Panel? You have a note attached to the interactive objects in the simulation? If so, check the desired option Quiz, more specific preferences.
-
Windows XP will not load past the Blue error screen
Hi, wondering for a while if someone can help me...
My xp system will not load past the Blue error screen that is displayed when the computer stopped suddenly or inadequate.
No matter what are the measures that you choose to take (safe mode, the most recent configurations... etc) the system will just beyond the blue screen on the windows logo download page, where the loading bar moves about 10 seconds before returning to the blue loading page.
So far I have tried to leave the computer as long as an unused months while I was abroad, remove the battery for varying amounts of time and leaving the computer as long as a day.
In the absence of a recovery disk, I have no idea how to do to return to the form and would like to receive advice or suggest, keeping in mind I'm not a computer genius (if had'nt you may have guessed). Preferably, without losing my element pictures and videos stored on the hard drive, but it's just preference.
Thank you, Jay
Hello
It does not seem good friend if the Windows operating system does not start even using safe mode, then I don t think you will be able to run the operating system without new OS reinstallation. :(
To back up data from the HARD drive I recommend that you connect the internal HARD drive to external USB HDD controller and a backup of the HARD drive on another computer.
Then you could try to reinstall the operating system on your laptop using the Toshiba Recovery CD
See you soon
-
When I start my leptop Lenevo my cursor will not move and after clicking on a key sometimes it start to move... and when the window open an item on the top left most corner of the desktop is activated itself and any items on the desktop, I clicked on the selected item open... during this problem touchpad does not work when I press any key some time then he start working side effect... of this problem are
(1) when we assume that slider in the middle of any page because of this problem just started automatically... Suppose that you read the number 10 on any book page and when that happens u don't come on the page no 1 automatically...
what I've done
I did a key recovery... even I am facing problem... Please tell me the steps to fix
Original title: DESKTOP PROBLEM
Hello
Check with Lenovo support, their drivers and documentation online and ask in their forums
on known problems.Support from Lenovo and downloads
http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.doLenovo forums
http://forums.Lenovo.com/Be sure to check that you have the latest driver for touchpad - updated or reinstall at Lenovo.
=============================
More troubleshooting if necessary:
Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911Crashes Windows or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">->
http://support.Microsoft.com/kb/2681286#method22Performance and Maintenance<- check="" these="" especially="" the="">->
http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1Other methods of troubleshooting to use according to your needs:
Use the startup clean and other methods to try to determine the cause of and/or
eliminate problems.---------------------------------------------------------------
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Include
everything you've ALWAYS had on this machine, including those you have uninstalled (they
remains of leave behind which can cause strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows
Vista or Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1Optimize Windows 7 for better performance
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performanceOpen the troubleshooter of Performance
http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-TroubleshooterTo see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at Applications.
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor file system, registry, process, thread and DLL
activity in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.asp
Many excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded: run DriverView - set
SEE drivers to hide Microsoft - update those with Dump in their names. (Also
updated the BIOS and drivers from the chipset on the site of the constructor/the system motherboard).-Free - DriverView utility displays the list of all device drivers currently loaded
on your system. For each driver in the list, additional useful information is
Poster: load address of the driver, description, version, product name,.
company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit Maker as replacements and system manufacturer of device which are
the most recent. Control Panel - write - graphics card - device manager
the brand and complete model of your video card - double click - tab of the driver-
Note the version information. Now click on UPdate Driver (this can do nothing
MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
If there are 3rd party with their own software and drivers and the other main device drivers
you have.Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
their latest versions. (Look for the system to update the BIOS, Chipset and software updates
Site of the manufacturer here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
REBOOT after each installation.Always check in the Device Manager - drivers tab to be sure the version you are
installation actually appears. This is because that some rollback of drivers before the
later is installed (particularly that audio drivers) so install a driver - reboot.
Make sure that it is installed and repeat if necessary.Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
SCANNER - check manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using
the above methods is preferable to ensure the latest drivers from the manufacturer of system
and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable driver facilities
in the updates of Windows, which leaves on Windows updates, but it will not be installed
pilots who are generally older and cause problems. If updates provides a new
driver then hide it (right click on it) and then go get new ones manually if
you want.How to stop Windows 7 automatically install drivers
http://support.Microsoft.com/kb/2500967===========================================
Refer to these discussions because many more excellent advice however remember to check
your antivirus, the main drivers and BIOS update programs and also to solve problems
with the first method cleanboot.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
How can I remove a program which will not move to trash?
How can I remove a program which will not move to trash?
What program? If she has an uninstall program, which allows to remove it.
-
Browser hangs and will not move through or around the office. Using
rt click disobeys. (sometimes it also locks).
Other browsers are moving very well with
Same or similar pluginsThank you
Dale
I had this problem with Firefox version 15 and found out it was because of the theme I had installed. As soon as I changed back to generic theme of firefox browser was able to move freely again. Some themes work very well but there are some that causes this problem of the browser do not move with left click the top title bar.
-
If I just powerdown (overnight), leaving a/c, connected, the cursor appears and moves, as my mouse moves. HOWEVER, if I powerdown and completely disconnect the PC, 110V, to keep safe from one close shot of lightning, THEN the problem appears. After the storm passed, I plug the PC into the 110 outlet, turn on the computer and restart it. The cursor appears in the center of the screen, but it will not move when I move my mouse. THE ONLY THING I can do is hit briefly, the power button to turn off the back and then click New to reboot (twice now)... then the cursor appears in the center of the screen and moves when I move my mouse.
Yes, I still think it's the battery. If the computer is turned off but still plugged into the wall, food always provides a small amount of power to the motherboard to keep a ready"" State. In fact, if you stop it, but keep it is plugged, you can send a packet to 'Wake-on-LAN' through the Ethernet that would then turn on your computer so you don't have to press any button at all. This requires that some things are always under tension even when the rest of your computer is turned off. Remove the plug from the wall removes this standby power and now the BIOS of your motherboard must hold his memory by falling back on the battery.
HTH,
JW -
After you have installed an in place upgrade to Windows Vista, it will not move beyond the 'Welcome' screen after you enter the administrator login password. The computer works fine in safe mode with network, however I am unable to boot normally without hang on the screen 'welcome. '
(the system is running pre - SP1)
Hello
Start the computer to boot in safe mode with network and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135
Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.
-
Vista will not go past the login screen.
Recently, I added 2 user accounts for my children. When I restarted windows would load the login screen, it would go no further. I click on any of the newspaper in the icons or the icon close / restart and they apear highlighted, but nothing happens. CTRl ALT DEL does not work either. I've tired of loading in safe mode and may still not exceed this screen. I tried restoring the sytem using F11 and select System Restore, and once again, I get to the login screen and will not move any further.
If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc. Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html. You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD. To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation. Push it quickly. Make the changes, save your work and exit. Put the CD in the drive and reboot. When you are prompted, press any key to boot from the CD.
If you do not have a disc, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.
I hope this helps.
Good luck! Lorien - a - MCSE/MCSA/network + / A +.
-
Gadget screen appears on the home page but will not move anything to the homepage
Original title: you had to send a solution to my problem of gadget #1194371707
gadget screen happens on my home page but will not move anything on the homepage, you said you would email me a solution, but you responded never please, my case is 1194371707
Delwyn salvation,
Thanks for choosing Windows and thank you for providing an opportunity to help you.
According to the description, you are having problems with gadgets.
1. which browser is installed on the computer?
2. have you visited a support Chat or call?
3. What do you mean by 'will not move not anything to the homepage'?
Since it's Forums Community Microsoft, unfortunately we have not information on case # 1194371707
Answer to us if you are having problems with gadgets or any other problem of Windows, and we would be happy to help you.
Good day!
-
What is the error code: 213:19... Photoshop Elements will not start past this error message
-
InDesign objects are not locked and will not move with the mouse click.
I rebooted, uninstalled and reinstalled. Objects interact with when the mouse is clicked. The contours of the block came and the object can be selected and changed, however it will not move with a mouse. Objects respond to the arrows when the issue is raised; but it's heavy at best.
I gave in my computer image. What was the origin of the problem, is now gone. Thanks for your help.
-
I used the Direct link to bring in a sequence of CCPP at SG. Everything was to find work until I started to create masks for the thumbnails. Then I noticed that my HEAD will not move. It seems locked in place. I can click on other shots and different things, but I can't move the PLAYHEAD. I have saved and reopened its doors and it is always the case. Any help would be appreciated.
sorted now thank you Neil, it seems that I need to add empty frames or key to move, which, in itself, seems strange.
Thanks anyway
-
Can someone tell me why the Google button + will not move?
Ive been looking for ages but just cant figure it
Thanks in advance!
Jenny
Google styles with their own JavaScript button.
Wrap your Google Plus button inside a div and give it a style inline, like this:
Nancy O.
-
My iphone will not suddenly be updated to icloud photos? It has been working well recently and I tried restore, reboot, turn iclould off photos and return, etc... can anyone help? well worked yesterday and now not... most of the time the number of photos don't match same new how I am download to icloud...
Have you tried the signature to iCloud and then reconnect?
Try a reset.
Maybe you are looking for
-
How to get back more than one page at a time?
Surfing on sites like eBay, I often look through several pages of a search. When I finished. I would like to be able to 'Go Back' to the page where I started. It may be several pages back and using the button 'Go Back' is heavy, when I need to go bac
-
I have problems of space on my iPhone 6, I have only 21 photos and 2 videos on my phone. However, I am part of a chart group on whatsapp. The problem now is that my storage space is almost full. How can I create more space for photos and everything?
-
Write directly to CD through the Explorer
I have to be able to write data directly to a CD using the CD - RW in my sitting A40 Pro but the software that came with the laptop does not seem to support this (I get only a form any drag 'n' drop software). Anyone know of a certain form of DirectC
-
We made a music video about a month ago, and somehow the largest part of the screen next to the 5.6 TVLogic and a Sony Oled would not show a picture. Is it because of the RGB? Is there a setting I need to change? Thank you Chris
-
Backup HD on the external hard drive with/without Time Machine backup
I use a drive external iomega hard so that I can save my Mac hard drive. I used the iomega to back up my old computer before and succeeded with just drag / drop the files I needed. I simply slipped fell the Mac HD icon in my iomega DHM and was able t