My reading and writing system does not recognize the DVD. For this CD. I don't know why.

Similar Questions

• Account Internet preferences system does not recognize the password for my AOL account... and so mail does not read the email in my AOL account

  Account preferences Internet system does not recognize the password for my AOL (Internet) account... and so Mail does not read the email in my AOL account

  Mail asking me to "Enter your password for [my AOL account] in Internet accounts."

  When I enter my password Internet accounts says it is "Impossible to verify the account name or password."

  iMac (24 inch, early 2009)

  Processor clocked at 2.66 GHz Intel Core 2 Duo

  Memory 8 GB 1067 MHz DDR3

  OS X 10.11.1 (B 15, 42) El Capitan

  Remove the password in Keychain Access (Applications/Utilities). While there, menu Keychain Access of relief.

  The problems of Keychain - see post of khati

• Power mac g4 does not recognize the DVD/CD drive.  It has worked very well in Leapard

  I just newly installed Tiger on my PowerMac G4, and now it does not recognize the DVD/CD drive.  I did all the updates and it does not see the DVD in the DVD drive.  It works perfectly before a new clean install DVD of the Tiger.

  What is your indication that the DVD is not recognized?

  Run the utility disc with the disc in the optical drive.  The drive will appear in the sidebar of disk utility?

  I did all the updates and it does not see the DVD in the DVD drive.

  If you put another type of disc in the optical drive, as a music CD, it is recognized?

• Western Digital WD10EARS internal hard drive Caviar Green 1 TB - my system does not recognize the new drive

  I recently bought a computer Dell 4700 to a friend with Windows XP installed. I've updated the memory to 2 GB and now seeks to install a WD10EARS 1 TB harddrive. The new works of fine memory is not the hard drive. My system does not recognize the new drive. I contacted WD for help and they told me to try diferent rider combinations that were Jumper 1-2 and 5-6, still does not work, I checked the hardware compatibility list and he said he would start uo without modification. This isn't. I would be very greatlyful for any suggestions, to HELP!

  I've had several people tried to help me solve my problem. They were all, I thought, more than I am computer savvy. As time progressed, solutions became more complex. After they all left without resolution I thought and it appeared to me that the simplest solution might be correct. One person had checked. I turned on the computer and when the Dell logo came I pushed the F12 key to open the Dell configuration screen. The drive on which the new drive has been installed has NOT been activated! Duh! I activated the he and the program Acronis recognized and everything went like clockwork after that. Phew! What relief! Thank you for your comments I am just glad that my problem it doesn't require resolution. Are Mod

• LG C500-G. AEE5GE1 with Windows 7 home prem OA MEA have been formatted. But despite giving the product key and Windows registry does not recognize the activation. Help, please

  LG C500-G. AEE5GE1 with Windows 7 home prem OA MEA have been formatted. But despite giving the product key and Windows registry does not recognize the activation. Help, please

  Name of the operating system Microsoft Windows 7 Home Premium

  Version 6.1.7601 Service Pack 1 Build 7601

  Manufacturer of operating system Microsoft Corporation

  System name HANDSOME-PC

  System manufacturer LG Electronics

  System model C500.-g. AEE5GE1

  System Type X 86-based PC

  Processor Intel (r) Core i3 CPU M 390 @ 2.67 GHz, 2666 Mhz, 2 Lossnay, 4 logical processors

  H46YSF00 Version/Date of BIOS American Megatrends Inc., July 2, 10

  Product key:

  X 16-96084

  CONCERNING

  TUESDAY BIOJY

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader. Do you have any suggestions?

  My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader.  I have just upgraded to Windows 8 of Window Vista. Do you have any suggestions?

  Hello

  I see nothing unusual, except that there should be a "0001", or even "0002"...

  When you have made the registry change, you used the command line (Admin)?... the process may not work with the regular command prompt...

  Also, try to go to Device Manager, right click on your DVD drive, click on uninstall and restart.

• My Dell laptop does not recognize the DVD / CD player or D drive more.

  My laptop does not recognize the DVD / CD player or D drive more. It is built in and included with the computer is a Dell. Can't use it because the computer can't find it. All ideas

  Original title: DVD player

  If it just happened all of a sudden, you can restore the registry files of the system in working order by following option n ° 1 on this page.  If this does not work, you can be reasonably sure that the configuration of the system is not the problem and start looking into other possibilities as a broken drive or a bad connection inside the cable.

• Windows does not recognize the DVD drive at startup

  Laptop: Dell E6410 ATG wt / verzion A15 Bios

  OS: Windows 7 SP1 with the latest updates.

  The question I have is when I log on Windows 7, the laptop does not recognize the DVD drive. The reader will not be displayed in my computer or Device Manager. I can get around this physically ejecting the disc and reinsert. If I do this drive appears in my computer Windows and Device Manager. It will read DVDs and CDs fine. I am able to reproduce the problem above mentioned question if I restart the laptop. If I restart the laptop the DVD drive won't be recognized and reinsert the drive will get it appears again.

  This problem occurs if I try a DVD - RW drive and an old DVD - ROM drive. If I go into the BIOS before windows, I can see the BIOS recognizing drives ok but not when initially get into Windows without having to eject and inserting the disc.

  Thanks in advance for any help.

  I guess that this must be a hardware problem then.

  Seems odd.

  The only other thing I can think of, after reinstalling W7, is a BIOS problem eventually. A strange setting it may be an older version of BIOS with a bug in it. If you decide to update the bios, make sure that you get the latest version for your make and model PC and follow the instructions. You can destroy a PC with bad BIOS or update the procedure.

• I am trying to create layers with a JPEG originally published in LR6. I converted the JPEG in a TIF format for my PES 11. PSE does not recognize the file for purposes of superposition; None of the routes command works. Just to see if PES was grateful the

  I am trying to create layers with a JPEG originally published in LR6. I converted the JPEG in a TIF format for my PES 11. PSE does not recognize the file for purposes of superposition; None of the routes command works. Just to see if PES was grateful the file at all, I tried to turn the file. Fortunately, he rotates the photo and turned it back. Why the program allow me to create layers?

  You click on Expert in pse before trying to add layers?

  Or it is possible that the image is 16-bit/channel.

  In photoshop elements go to Image > Mode and click on 8-bit/channel and see if that makes a difference.

• Recovering the Windows system does not recognize the hard drive

  Computer does not recognize the hard drive when booting.  Guard gives me 1782 disk error.  Then try to use the ROM installation thing and throw a disc hard test there is no option to test anywhere.  Computer was working fine this morning and then I stop when I turned it back on it was not properly start.

  I have a zt3000 running xp sp3

  someone please help me, thanks

  Hello

  Please reinsert the drive from the rear panel and check if the device detects the drive hard in case you have the same problem, then the hard drive is bad, you need to replace the hard drive and reinstall the operating system on the unit to return to its operating state.

• DreamColor LP2480zx does not recognize the USB for calibration

  Hello

  I have a DreamColor LP2480zx, which does not recognize the USB connection to the computer during calibration.  I have my eye HP connected through this monitor, so I know the connection and the cable is good and mouse, keyboard.  My setup is like this:

  Reference Dell 690 running 64 bit + Windows XP

  DreamColor LP2480zx

  Apple Cinema Display 23 "

  I bought the DreamColor used, and in all other respects, it seems to work very well.  The original owner didn't have it calibrated within a certain time, but said that having had no problem with the previous calibration.  I installed the last APS (version 2.0) and updated to the latest firmware.  These updates produces no change in recognition USB problem.

  The interesting thing is, I was able to calibrate the Apple Cinema Display, using the same configuration of connection (mouse, keyboard, and HP eye connected to the computer via the LP2480zx) APS was able to see the USB connection and this very well calibrated monitor.

  I had trouble with this problem for a few days.  I've looked around quite a bit online and found a few others who have this same problem, but I did not yet find someone who can point out a solution.  If anyone has had this same problem, or has heard of results that correct it, please let me know, because it's very frustrating.

  Thanks for any help

  Clay

  An update to my previous post, I realized a work around for this problem.

  Apparently, this problem has to do with the Dreamcolor screen and/or software APS do not like working with 64 bit systems.  I'm not saying that it is always the case, but I saw the other posts on this problem on 64-bit systems, and I spoke with two other people personally who told me that they also had the same problem, try to calibrate its Dreamcolor monitor when it was attached to a 64-bit system.  HP does not seem to be concerned about this problem, because they do not even recognize its existence, but since I'm far from being the first to report this problem, he's obviously not a one-time problem.

  My solution was this: I had connect the monitor to a regular running XP 32 bit system.  After I did, I could re - calibrate the monitor without the problem of USB connection.  This isn't a very good solution because not everyone has access to several machines, running different operating systems.  But it's a work around, and it worked for me.

  Hope this helps other people who have this same problem with their Dreamcolor monitors hooked to their 64-bit systems.

  Clay

  PS- I posted this as resolved, only because I was able to calibrate my monitor.  It's not really solved the problem, but it gets the monitor working again.  Maybe HP will address this problem in the future, but I'm not holding my breath.

• Tecra M1 does not recognize the DVD drive after replacement

  I am trying to install a new drive CD-RW/DVD-RW on a Tecra M1; However, when the computer does not recognize the drive.

  Is there a solution to this?

  Thank you

  Colin

  For me it s case.
  I would say that the BIOS can't handle the new player properly because of the wrong master/slave/c-salt settings
  Readers slim for computers laptops support setting master/slave/c-salt settings and these settings can only be changed by changing the rider as on desktop drives.
  So it is very important that you purchase a compatible player and supported because disks with incorrect settings will not work.

  Before buying a car, you should ask the service provider to Toshiba for a caught player supported and compatible

• Acer Aspire 5517 does not recognize the DVD in the drive

  I just bought this new laptop last night. The DVD player does not recognize any DVD or CD placed in the tray. All if the player starts but nothing appears on the monitor. I have the auto-play configured to recognize any software install cd/dvd.

  http://support.Acer.com/

  As it is new, it is under warranty.

  Contact Acer A.S.A.P. > and make a claim.

  See you soon. Mick Murphy - Microsoft partner

• Sync system does not recognize the device

  original title: synchronize the system used to recognize my device. Now it is not. Device driver indicates that it works correctly, but I can't download songs or videos.

  My system to Sync Windows Media Player does not recognize when my Samsung Captivate phone is connected.  When I got him on the phone, all worked fine, but now it doesn't.  I would like to transfer new songs and videos to my phone, but the system doesn't seem to know that the phone is connected.  All drivers are in good working condition.  Computer knows the phone is plugged into the screen of pilots, but not on the generic details screen.

  Hi michie75,

  1. you remember to make changes to the computer before this problem?

  Step 1:

  You can run the fixit available in the link below and

  Equipment and devices not getting not detected

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Step 2:

  Check if the sync settings are correct. To do this, follow these steps.

  a. open Windows Media Player.

  b. click the arrow below the Sync tab, point to the device and then click Advanced Options.

  c. the Properties dialog box for your device is displayed. Tab sync, box start sync when device connects checkbox.

  d. restart the media player.

  e. the next time you want to sync, connect the device to your computer, click the Sync tab, and then click Start synchronization.

  For more information, please visit the links below:

  Set up a device to sync in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player

  "Windows Media Player sync: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• CD/DVD drive does not recognize the DVD media disc.

  Greetings,

  Had problems with my CD/DVD drive not being able to recognize that a DVDmovie disc is in the drive.

  I tried to turn on/off, reinstalled the driver, update the driver, check if AutoPlay is enabled (currently set to invite me) and have used the Microsoft Automated Troubleshooting system which could not solve the problem.

  I am able to burn data and audio files on CD/DVD very well, it will read the same types without problems.  But whenever a DVDmovie disc is, it does not recognize, there is a disc in the drive, or Autoplay hit.

  Also clean the laser lens with isopropyl alcohol.

  Thoughts?

  Honestly, I had not checked immediately after I cleaned the lens, but it works now.  I am convinced that cleaning the lens resolved.

  I had posted this, and then read somewhere else to clean the lens, has made, edited my post saying I had it done and then tried a DVD and it worked.