My Readyboost does not work. When I click on dedicate to Readyboost, it gives me an error: failed to create the cache.

Similar Questions

• I have my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it might

  Can I get help with a problem please? my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it. I tried to delete some files, but it wouldn't let me not make a right click on it to remove

  could you please email me at * address email is removed from the privacy *.

  Thank you very much. I hope hear from you soon. Thank you once again :)

  Can I get help with a problem please? my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it. I tried to delete some files, but it wouldn't let me not make a right click on it to remove

  could you please email me at e-mail removed for privacy

  Thank you very much. I hope hear from you soon. Thank you once again :)

  You have a laptop. So try the right button on your touchpad. It work?
  If so, the only remaining possibilities are:
  1. bad mouse. Get a new one.
  2. defective UBS port. Plug the mouse into a different port. See if the right click of the mouse works this time.

  P.S. We do give advice to users via e-mail. All responses must be published and remained in this forum so that others with the same problem will use the answer.
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• There was an update on adobe readerX10.1.3 but its does not work, when I click it it says check the patch that created it and I do not understand my daughter must have put it there

  my adobe reader software does not work, how can I make it work? his x (10.1.3)

  Troubleshoot the installation of Adobe Reader for Windows
  http://kb2.Adobe.com/CPS/403/kb403923.html

  You will find the Adobe Reader support in this forum: http://forums.adobe.com/community/adobe_reader_forums/adobe_reader

  ~~~~~~~~

  Note: Adobe Reader v10.1.4 was released August 14, 2012 & should be installed now. See http://www.adobe.com/support/security/bulletins/apsb12-16.html

• Windows media player does not work when I click on the drive icon in the taskbar

  Player does not respond to an initiation. I have a windows system 7, not sure about the edition of player. Was it somehow been deleted?

  Player does not respond to an initiation. I have a windows system 7, not sure about the edition of player. Was it somehow been deleted?

  Pin this WMP icon in the Task bar by right clicking on it. Now look at WMP in the program, menu-right click and select PIN to the taskbar. This helps.
  I have that it doesn't then try to reset wmp12.

• Full Tilt Poker - allow or block the screen keeps coming back, and it does not work when I click on one of them.

  A screen is constantly on Full Tilt Poker. It says I can allow or block. I keep clicking on allow, but nothing happens. I played Full Tilt for a long time...

  
  

  Hi Lydia,.

  1. what browser do you use to play this game?

  2 have you logged in as administrator ?

  It could be virus, I suggest you start a scan using your security software or a scan online using the link below.

  http://OneCare.live.com/site/en-us/default.htm

  If this little help, please get in touch with the Full Tilt Poker's Web site and ask them. They should be in a better position to answer this question.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Open with does not appear when I click on a URL in Firefox on my desktop

  Click right 'open with' does not appear when I click on a URL in Firefox on my desktop. The codec-c no longer works with 9 update of Firefox, so I would like to open with Internet Explorer instead until the Codec-C is compatible with Firefox again.

  Add - ons:

  • See-> https://addons.mozilla.org/en-US/firefox/addon/open-in-ie/
  • See-> https://addons.mozilla.org/en-US/firefox/addon/open-with/

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Event does not work when I have my variable of variable mutual FUND!

  Hello

  I programmed a labview vi to add a field to a list view when a Boolean variable value is changed. I used a case Event (value change event) structure to determine if a variable value is changed, it works when I force the Boolean control with my mouse click, but it does not work when the value of the variable is modified by the mutual FUND. What should I use instead?

  Value change events are based on the interaction of the user (or the same ejection programmatically based on the value property node (signaling).)  It is not based on a control change via a regular, variable property node local, terminal or any other connecito0n programmatic or binding.

  You must simply query the variable and determine when it changes.  In this case, you can then use the node value property (signs) in the case of event fire.

• Sound does not work when it is connected to the TV with HDMI

  I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance

  Hello gematz,

  The sound does not work when it is connected to the TV via HDMI.

  Go to start.

  Type sound.

  Click sound

  On the playback tab, click with the right button on the HDMI interface, and then select set as default device.

  If you do not see the HDMI, right click and select devices see off, then set as default.

  I would like to know how everything goes.

• LAN does not work when the Cisco E1000 router hangs

  Original title: Download sp3

  Remember - this is a public forum so never post private information such as numbers of mail or telephone! I bought recently a new Cisco E1000 router. My computer is a laptop model Lenovo 0769.

  I am running windows XP with sp2. The cisco software requires sp3. I called support of cisco and even they couldn't get to download sp3. My network is wireless on the router and I had to install from another laptop computer on the system. My LAN does not work when hooked. What do you suggest to me.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi mdenrique,

  1. what exactly do you mean by LAN (Local Area Network) does not work? You get the error message?

  If you have not installed Service Pack 3, try the following steps:
  Step 1: Download Service Pack 3
  see How to obtain the latest Windows XP service pack .
  b. scroll the window and click on "Download now the Windows XP Service Pack 3 package" to download the service pack.
  c. save the file on the desktop.

  Step 2: Install Service Pack 3
  a. open the file downloaded and follow the instructions in the wizard to complete the installation.
  b. restart the computer once the installation is complete.

  For more information, see steps to take before you install Windows XP Service Pack 3

  Note: Once you have installed service pack 3, install the router and check if the problem persists.

  Step 3: To troubleshoot LAN, run home and small Office Networking Troubleshooter
  a. Click Start and then click Help and Support.
  b. under Pick a help topic, click Network and Internet.
  c. under network and the Web, click on resolution of networking or Web problems and then click on home and small Office Networking convenience store.
  d. answer the questions in the troubleshooter to try to find a solution.

  For more information, see the following articles:
  1 see How to troubleshoot a network in Windows XP
  2 see two resources to solve the problems of connection network in Windows XP

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with the .exe file programs + System Restore does not respond when you click

  I have Windows Vista. This problem started a week ago. I tried at first to use my "ccleraner" already installed, but this program does not open when you click on it. I was asked to choose the program that the application to use to open it. This has also happened when clicking on itunes. My avast program when you click also asked which application is required to open it. When it finally scanned my system it does no propblems. In addition, I tried to turn on windows defendrer as he told me that it was off. Clicked on 'Turn on..' and nothing happened. Help!

  Hello

  See the following message to solve the problem of .exe if necessary once you are sure that the system is clean.

  Try Mode safe mode with networking - repeatedly, press F8 that you start.

  The best two methods allow scanners to run and/or AV.exe out of the way or removing.

  1.
  CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

  Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

  If necessary use start - computer or Windows Explorer to navigate to

  C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
  necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
  is installed.

  Right-click on it and rename it to ZZMbam.COM (or something different than now), then
  Double-click it and run it like this. You can rename it back later. Do the same with others
  programs as needed. Use this method for other necessary - DO NOT ASSUMER one
  program removes all or that there is no other malware.

  ---------------------------------------------------

  2.
  Another method is to use them:

  Use Process Explorer to "Suspend" the process will not stop

  Then use AutoRuns to delete the malicious program startup items.

  Now use UnLocker to delete the files in the malware.

  You may need to do a file at a time.

  Process Explorer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  AutoRuns - free
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  UnLocker - free (do not install the adaware Ebay)
  http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

  AV.exe

  ==============================================

  There are MANY varieties of these with many names, but all can be eliminated with the same methods:
  
  Win 7 Antispyware 2010 XP Internet Security 2010 and Vista Antivirus 2010 is rogue antivirus.
  scams to get you to pay for them while they have no advantage at all.

  How to remove all THE varieties of this malware - please read carefully the removal Instructions.
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
  
  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the
  in the regular when windows you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
  UnHackMe execution)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download
  here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
  It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
  How to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
  Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
  taken (such as the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• screen saver does not work when magic jack is pluged in. unplug mj it works

  screen saver does not work when magic jack is pluged in. unplug taking magic, the screensaver works properly.

  09/05/10 the MagicJack has released an update that prevents the screen saver and "standby" mode. They are aware that people are upset on this issue, but they seem not to care.

  Here is a simple solution to the problem. I've used it since 10/09/10 and it works perfectly.

  Restore the functionality of screen saver / display after MagicJack diverted these features...

  Click on the Start button in Windows 7

  type cmd in the search box

  Right click on cmd and run as administrator if you are not running as an administrator it will not work!

  type: powercfg /requestsoverride PROCESS magicJack.exe DISPLAY

  Make sure that you type the capitol letters and lowercase no look of magic make 'J' ack it's capitol as well!

  Press enter

  Now unplug your magicjack

  Restart your computer and let the unplugged MagicJack

  Once the computer starts together your screensaver for a minute then let it sit for a minute activate screen saver...

  Now plug your magic let sit for one minute Alto screen saver is now active!

  If you want to activate the sleep as well, follow the same instructions as above, but simply type this line instead.

  type: powercfg /requestsoverride PROCESS magicJack.exe DISPLAY SYSTEM
  
  If you follow these instructions, your sleep/screen mode will work as before.

  Kind regards
  ZzyzxDude

• Explorer Windows doesn't do not work when left clicked in the taskbar. Explorer.exe is running in the Manager of tasks for only a few seconds then cuts.

  I have a problem with the Windows Explorer. When I left click on the taskbar Task Manager indicates that explorer.exe is running, but deletes then after a few seconds. I can right-click in windows Explorer and select any file frequent or pinned and who opens, okay, right click in windows explore does not work. I clicked the windows Explorer and checked the properties that appear to be identical to my second PC that is also running windows 7 and works very well. I also open the location of the files and tried to launch explorer.exe in c:\windows which gives the same result. Can someone help me please.

  Hello
  Welcome to the Microsoft answers forum.
   
  I suggest you perform the clean boot.

  To perform a clean boot on a computer that is running Windows Vista, follow these steps:

  1. click on start, type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  When you are prompted, click on restart.
  After the computer starts, start the program or game and see if the problem is resolved.
   http://support.Microsoft.com/kb/331796

  You can also perform a full scan of your computer, please visit this link:

  http://OneCare.live.com/site/en-us/default.htm

  You can also try running sfc scan, follow these steps:

  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  2. type the following command and press ENTER:
  sfc/scannow

  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions
     http://support.Microsoft.com/kb/254649

  You can also check in safe mode, please visit this link:

  http://windowshelp.Microsoft.com/Windows/en-us/help/d063548a-3fc9-4723-99f3-b12a0c4354a81033.mspx

  Thank you and best regards,
  Azam - Microsoft Support

• Question 1: The button "Buy now" does not work when you select a plan. Question 2: Can not select "Monthly Plan" for a "unique App."

  Question 1: The button "Buy now" does not work when you select a plan.

  How to reproduce the problem:

  1. go in terms of pricing and membership creative cloud | Adobe Creative Cloud

  2. choose a plan, then click on 'buy now '.

  3. you go to a blank page instead of the next steps in the payment.

  Question 2: Can not select "Monthly Plan" for a "unique App."

  How to reproduce the problem:

  1. go into "https://creative.adobe.com/plans".

  2. under "Unique App", select a product and then try to select the "monthly Plan" in the second menu drop-down.

  3. for some reason, it isn't get selected and the price is replaced with the ellipsis (...). I expect the monthly price to appear.

  Please notify.

  Thank you.

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• As I installed Sierra, my Trusteer account to my Bank quit and does not work when I reinstall. Neither will Quickbooks!

  As I installed Sierra, my Trusteer account to my Bank quit and does not work when I reinstall. Neither will Quickbooks! Help!

  Trusteer (report) has caused a lot of problems Mac users such noted search Apple Support communities here.

• My DVD player does not open when I click on the button

  Hello

  I hope someone can help me.
  My DVD player does not open when I click on the button.

  I tried clicking on eject on the DVD drive icon in my computer and it comes up with an error message.
  I think I deleted the cookies the other day. Who would have something to do with the problem?

  Any help would be greatly appreciated that I really don't want to send my phone to a technician.

  Hello

  Try to manually open the CD/DVD drive.
  Near the eject button, you will find a small hole.

  You can use a small object like staple and could push gently into this hole.

  Usually, this should help to open the drive manually.