My recovery CD does not work, says bad Machine

I have a recovery CD that I used throughout. I used this CD before, but now when I try to use it it gives me the error message bad camera. I took it for repair and after that hats when I started having this problem. Am suspecting that they installed windows XP operating system that is not for Toshiba machine. My model is the Satellite Pro 6100 series. Help, please.

Hello

The case is clear!
The laptop has been repaired but the DMI was not updated by the service partner!
DMI is stored on the system board and sometimes if the information string is empty or incorrect the recovery CD can be recognized as correct.

The DMI string contains, among other things, the model number of the system.
When you use the recovery CD to recreate the image on a system, the installation process examines the DMI string and compares this string to the image being restored to ensure that the right image is applied to the correct machine.

It seems that you have to contact service again for good luck DMI update guys

Tags: Toshiba

Similar Questions

  • For 1000-zx satellite recovery disk does not work

    XP Recovery disk does not work. The 3 options are unresponsive. Is there an easy solution. All other functions of cell phones seem ok. It is a reliable machine for more than 3 years, but now must use the recovery disc. Brilliant ideas greatly appreciated.

    Hello

    Well, I put t know why you recovery CD doesn t work. Have you checked the CD some scratches? Have you tried to clean this CD?
    However if it of impossible to use the recovery CD, you can contact the ASP and buy a new one. It doesn t expensive.
    In addition, you can install an original Windows operating system and then all the Toshiba necessary drivers on the Toshiba site.

    Good bye

  • Portege M200 recovery process does not work

    I want to re format my old M200 of 4 years using the original recovery disks (4).
    The recovery.txt file that is stored on the first disc advise me of a process for this, but also States that "this utility does not if the drive has been formatted or converted to NTFS.

    My C drive is NTFS, and the recovery process does not work.
    I'm unable to find any other documents or files on the drives to advise me what to do help.

    I would be greatfull for anyone who has experience with this issue who can advise me on the correct process to run my recovery on a drive formatted as disks

    NTFS.

    May I ask what laptop do you have: is it a M200 Satellite or Portege M200?

    How have you tried to recover the laptop?
    Have you tried to boot from the CD?

  • My recovery CD does not work and will not install my genuine copy of Windows XP.

    XP Home Edition.

    I bought a computer acer laptop, which came with a pre loaded windows XP Home Edition. As I had to format the laptop for some reason, I used a pirated version of XP.  Now, I want to install the original version. I have the product key. My recovery CD does not work, because I had used the pirated version.  Pls help...

    You need to start using the CD - no existing OS - and install it to clean.

    It will wipe your drive first, back up your data on an external support.

  • Data Recovery Advisor does not work

    In our environment of RAC DB 12 c Data Recovery Advisor does not work? Why?

    The Data Recovery Advisor is only supported by ORACLE DB Single Instance!

    https://docs.Oracle.com/CD/E60665_01/db121/BRADV/rcmrepai.htm#BRADV246

  • got photoshop elements 12 of qvc and its does not work (says it's a pirated software)

    got photoshop elements 12 of qvc and its does not work (says it's a pirated software)

    If not installed, install Adobe Application Manager and then try to install again.

    http://download.adobe.com/pub/Adobe/creativesuite/CC/Win/ApplicationManager9.0_all.exe

    Always the same?

    Try to install using the download configuration file:

    https://helpx.Adobe.com/Photoshop-elements/KB/Photoshop-elements-downloads.html

    Reference:

    Warning: "Adobe software real failure of Validation...". » | Windows

  • Error: The Windows wireless service does not work on this machine and is called autoconfiguration WLAN service.

    Original title: I do not see my available networks

    I get this message when I try to solve the problem: Windows wireless service does not work on this machine and is called autoconfiguration WLAN service. Does not start Windows wireless service failed questions available detection area 5 Windows wireless service does not work on this computer only set not Windows wireless services is also called the autoconfiguration WLAN service.  Network Diagnostics log file name: 5894B3A3-5541-48-A8FE-7A7E2E8E3B10. Detection of Repair.Admin.0.etl detail information name of the computer Collection: RODRIC29 - PC Windows Version: 6.1 Architecture: amd64 time: Thursday, August 23, 2012 12:27:11 Publisher details Windows Network Diagnostics detects problems with network connectivity.  Package version: 1.0 Editor: Microsoft Windows can help anyone? (Windows 7 Inspiron computer laptop)

    Hello

    1 have you checked the State of the wireless autoconfiguration WLAN service in the services window?
    2. do you have security software installed on the computer? If Yes, is it updated regularly?

    3. have you done any software or hardware changes on your computer before this problem?

    4. What are the troubleshooting steps you have tried to solve the problem?

    Refer to these methods.


    Method 1:

    We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service.

    (a) click Start, type Services.msc and press enter.

    (b) locate the autoconfiguration WLAN service, double-click to open its Properties window.

    (c) on the general tab, change the Startup type to Automatic and click on the Start button.

    (d) click apply and then click ok.

    (e) try to connect to the wireless connection and check the result.

    See also:

    For more information on the wireless settings, see this link:

    http://TechNet.Microsoft.com/en-us/library/ff802404.aspx

    Method 2:

    Using the troubleshooter from network in Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    See also:

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Check if it helps.

  • Satellite A100: Recovery DVD does not work

    I want to restore my Toshiba Satellite A100 laptop to its original factory condition, but the DVD that comes with the package of recovery does not work...

    I have load to start computer press F12, and it starts on the DVD. It says "Loading RAMDISK Image", after which I am told by Toshiba customer service there should be options to clean up the hard drive or restore Windows XP.

    However, after VIRTUAL disk, I see a cursor on a black screen, and then the laptop off and restarts. After the connection, NO CHANGES made...

    What is the problem with that? How can I really use this recovery DVD?
    Someone help me please.

    Thank you.

    Hello

    The recovery procedure is not difficult.
    Just try to boot from the recovery CD or DVD and follow the Guide on the screen line.

    Your problem is very strange. You have created all the partitions on the HARD drive?
    I put really t know why your recovery CD doesn't work properly, but I think you should try to completely format the disk (also partitions), then try to boot from the recovery CD.

    Don't forget that the laptop is in the boot mode. (don t mix the standby or hibernation mode)

  • Satellite A30 - 203 - recovery disk does not work

    Hi all

    I have an old Satellite A30-203 and have a problem. I tried to format my laptop but the product recovery cd does not seem to work in deletion the data on my disk, its becomes blocked during loading files of ntfs? Now I am not able to retrieve a windows session would I need a new product recovery cd and would be able to get it?

    Thank you

    Hi dimation,

    It is difficult to say what is the reason of this but made is either it s a laptop problem itself or the recovery disc (e.g. scratches) causes this problem.

    In my opinion the best way to check this using a Microsoft Windows disk. If the installation completed successfully, you need a new recovery disk. As a result, you can ask a service provider authorized in your country! :)

  • I'm trying to recover my Windows Vista, but one of my #2 recovery disk does not work... What can I do?

    I copied 2 cd on my hard drive disk recovery & disk #2 does not work. I tried to get through the system recovery to restore the computer to its original factory shipped State. It calls into original form and content reinstalles. Then it restarts to finish and said: ERROR LOADING C:\PROGRAM FILES\WINDOWS MEDIA PLAYER\wmssetup.dll THE SPECIFIC MODULE COULD NOT BE FOUND!

    THEN IT CONTINUES TO THE NEXT WINDOW WHICH SE BED:
    INSTALL WINDOWS
    WINDOWS COULD NOT PARSE OR PROCESS UNATTEND ANSWER FILE FOR [SPECIALIZE]. THE SPECIFIED IN THE ELEMENT OF THE RESPONSE [MICROSOFT-WINDOWS-DEPLOYMENT] FILE.

    AFTER THIS WINDOW IT SAYS PRESS OK BUT MY LAPTOP DOES ME NOT LEAVE THE REST OF THE ARROW IN THE MIDDLE OF THE WINDOW & WON'T LET ME CLICK ON IT! WHAT CAN I DO TO GET THROUGH THIS PROCESS!
    YOUR HELP WOULD BE GREATLY APPECIATED! THXS
                                                      

    Contact the computer manfacturer, who provided the original discs.

  • Problem of Pavilion dv67023tx, drive damaged, recovery system recovery cd does not work

    Hi all! I really need help

    I bought my computer hp laptop Pavilion dv67023tx July 2012.  When I bought it, they gave me a set of recovery disks. January 2013, I did a system restore. It was fine then.

    Later, after some software hp update my cd player began to eject automatically. The light of the hp on the lid logo disappeared also. My audio jack went wrong from the beginning. So for all these problems together, I took it to the service center, and as it was in warranty period, they sent to hp. 3 months later I have my laptop back, I was informed that hp has changed the hard drive, motherboard, cover, screen.

    There is a month Itried to install some of my software I used earlier, but they were not working. If I had no other way than a system recovery using this link

    http://support.HP.com/us-en/document/c01867418

    Then the main problem occurred. I couldn't do a system recovery from disk on my laptop. Then when I tried to do the recovery disks and he says, the system recovery disks do not support this computer. You are not able to restore this system with these discs.

    http://support.HP.com/us-en/document/c01868346

    This link said, maybe its because hp has changed the motherboard.

    Now what should I do? I need a factory. But recovery in my laptop drive does not work, my recovery disks do not work. Please help me out of this. Or give me email ID so I can contact HP directly with problems, I do not find anything.

    Others suggesting me to install a pirated Windows 7, I don't want it. I had a real windows 7 pre installed, why should I?

    I'm sorry but I can't help you with recovery disks not working is not on your computer, but I don't have an alternative. If you can still read the 25 characters on the COA affixed Microsoft Windows product key at the bottom of the computer, you can install Windows 7 Home Premium using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7 SP1, create the installation media and install Windows 7 SP1 by using the 25 digit product key from the COA Microsoft on your computer.

    If you have any other questions, feel free to ask.

    Please click the White Star of KUDOS to show your appreciation

  • Win 7 64 bit HP recovery CD does not work

    Hi all

    I ordered the HP Windows 7 64 bit recovery CD and it doesn't work.

    When it separates partitions, and it displays its progress as usual for example

    1/7 full
    2/7 full
    3/7 full (files copied etc..)

    but around 3/7 or 4/7, the sound of the CD in road changes and it seems that it restarts continually.

    I am confident that the problem is related to this CD because the other disks work properly and the 32-bit recovery CD, I had with laptop computer reinstalled Windows very well.

    I wonder what could happen? I have contacted the company on this topic and am waiting to hear. I see no damage to the evidence on the record, and I take great care in general. All I know is it does not work. Any ideas?

    Thank you

    > I ordered the HP Windows 7 64 bit recovery CD and it doesn't work.
    What do you want with a HP recovery disk?
    If you have a Toshiba laptop, then you must use a recovery disk Toshiba

  • Satellite L350-170 - recovery disk does not work

    Hello

    I have a L350-170 running Windows Vista home, I recently buy a Toshiba restore CD and now that it's happened, it does not work.

    I put in the CD and boot from the CD drive, I can hear work and the display shows "Windows loading files" and a bar appears at the bottom of the screen, after that, the screen turns white and all I'm left with is a pointer of the mouse and a black screen.

    Thank you
    Jackie

    Hello

    Have you tested if the laptop would start using another bootable Linux Live CD, WinPE or Win XP disc?
    Please check that would help determine if the problem is related to the computer laptop or recovery disk.

    Please also check if the HARD drive is ok. For this test, you can use a test called Drive Fitness Test free HARD drive tool. Google for it.

    However, it could also be a defective recovery disc and in this case, you should get in touch with the guys where you ordered this drive may be you need a replacement.

  • Internet worked well until I have Reinstalled windows vista 64 bit, now my Internet does not work, says that I don't have a driver from the Internet.

    Internet worked well until I reinstalled windows vista 64 bit on my Dell laptop, now my Internet does not work. Went into Device Manager and there is no network adapter. I tried to reinstall the driver that came with my laptop disk but it doesn't seem to work, says that I need an updated driver. I don't know what else to do, I have to install a new driver from the Internet? Ugh becomes very frustrated!

    http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

    Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

    The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

    See you soon.

    Mick Murphy - Microsoft partner

  • My recovery key does not work even after resetting it. How can I solve it

    I signed into my account but lost the other device, so generate new key. This new generated key still does not work. Anny sugestion please?


Maybe you are looking for