My root directory doesn't let me connect to the server.

Similar Questions

• Changed ID apple on iPhone, now it doesn't let me connect on the change on MacBook

  My ID apple was my school email and I'm not going to this school most, so I thought I'd just change it. Apparently, it is not that simple. I changed the email, got it works on my phone, but now I can't change it on my MacBook. I know that I need to log out of the old account, but I can't because the former was "locked for security reasons", and it says I need to change the password in Julian inconu. The password I was using will not and no more than one of the previous. When I change the password, it tells me that this ID there is no apple. I don't know what to do. I am so bored - I locked myself in a lot of things on my MacBook and cannot find how to fix it. I'm afraid he'll sign out me of my cell and not let me.

  UPDATE: I've fiddled around a lot on mine and I think I got it. What I had to do, it was in fact make a new apple with the old address that was appearing as if I could connect ID and sign out of it. (It's really unpleasant to have to connect to disconnect. What the devil. "(But my roommate said that she has never had to do, so maybe I just messed up mine real bad)." Then I had to reboot my computer so I could reconnect to iCloud with my real apple id, and then I had to reboot again to connect to iMessage and FaceTime. It seems to work fine now, but it took me SEVERAL times in fact sign as iCloud and iMessage, etc. because he kept me and give me an error message "not available". The whole process took me about two hours, even after that I realized what I thought I had to do. I don't really know if iMessage, Facetime, etc. are actually functional for now - haven't tested them, really hoping that they are because I have an exam tomorrow and has not had time for this first.

  But anyway, the problem seems to be resolved.

• Unable to connect to the server on my HP Officejet Pro 8100 eprint

  I bought this printer a few months ago and had no problems of implementation. It is configured as a wireless printer and I allowed him to install his own IP (use DHCP). EPrint configuration was also easy to implement.
  
  Last week, it was necessary for me to set up my network home, consisting of 3 computers, NAS QNAP, IPAD3, HP printer, with static IP addresses.
  To set a static IP address on my printer, I had to reset the printer, uninstall the software and drivers and reinstall. Everything is going well until I tried to connect to the eprint server by using the embeddeded web server (EWS). It wouldn't let me connect to the server. I went into the settings of web services, but not a not to connect to the server in one of the topics. On the printer, the symbol wireless is turned on and the printer works with all my devices on the network, but the EPRINT symbol is turned off and not be in power switch manually.
  (My main computer is a HP Envy 17 under Windows 7 Ultimate and the printer has been configured using this computer. 2 other computers running Windows XP
  I would appreciate your help. Thank you very much

  Hi VisionAiry,

  Received an email from HP no later than April 4, after I had been hunting them for a response. I've been away for a few days, so today was the first opportunity to try the HP suggestions, they were as follows:-

  We recommend that you do the following:

  Please, check the following:
  You have a MAC filter or the firewall of the router may be blocking the signal?

  Please proceed as follows:
  -Perform a reset of the NVM on the printer, please find the below steps.
  -update the firmware of the printer, please find the below steps.
  -connect the printer to the router with the Wireless Setup Wizard (dynamic IP address)
  Press the button on your printer wireless
  Choose settings
  Choose Wireless Setup Wizard
  -Enter Google's DNS servers in the EWS (built-in web server) the printer
  Click the Networking tab
  on the left side choose wireless (802.11)
  in verifying the Configuration of DNS manual DNS server address
  in manual preferred DNS 8.8.8.8 Server type
  in auxiliary DNS server, type 8.8.4.4

  -enable Web services
  -If this does not work, please provide us with the exact error message.

  Execution of the NVM reset
  NOTE: Be sure to keep the ink supplies in the unit to avoid to reset the State of the initialization of the device.

  1. press the Power button to turn off the product.

  2. with the product off, press in and hold the wireless button and the button (the button with the rectangle and arrow) and then press the power button.

  3. release all buttons.

  4. wait while the product resets. The screen stays on during the reset process.
  When the on stop button lights or flashes, the product is ready for use.

  Firmware update
  Please follow the link on the hp site for an update of the firmware:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5218794&LC=en&cc=UK&DLC=en&lang=en&cc=UK

  It is absolutely vital that this update via a USB cable or ethernet so it is physically wired to the printer. An update of firmware through a wireless connection is NOT recommended and may cause other problems with your printer.

  I have also attached the link for the User Guide in case you want to review.

  https://external1.collaboration.HP.com/external/tecteam/Shared%20Documents/product%20Line%20Files/TEC%20Inkjet/UG%20OJ%20PRO%208100.PDF

  AirPrint

  Please update firmware as explained above.

  Please turn on the router, the printer and the iPad. Important first to reboot the router.

  Make sure that the product is connected wireless to the same subnet as your iOS device.
  Check if the printers EWS accessible from Safari on the iPhone/iPad (insert the IP address in the URL field). If this is not possible, then the iPad/iPhone not be connected to the same network as the printer. Open system preferences, and then select the network

  After suggestions from HP and after having re-recorded with eprint and after the email address for a new another eprint choosing, I can now use eprint and print from my IPad with all devices on my network using static IP addresses.

  (I don't have to change all the settings on my router)

  Thanks again for all your help and suggestions along the way

• MS Money 2007 on Win XP doesn't let me connect online telling me that Windows Live cannot check my login information.

  MS Money 2007 on Win XP doesn't let me connect online telling me that Windows Live cannot check my login information.  It happened all of a sudden in the last days.  I have yet to receive a response to this problem that works.  Everybody doesn't know how to fix this?

  The same question in the Windows 7 forum - and it worked

  1. Start Money
  2. In the connect to open your Money file page, type your Windows Live ID credentials, select thework offline check box and then clickNext

     Note If you have recently changed your Windows Live ID password until you have used the money, make sure you use the last password that worked with money. Based on your version of Money, your experience may be different. Basically, start, get the error of not being able to connect and continue so that you get cash itself

  3. On the file menu, click Password Manager (for Money 2002, clickconnection security box ), and then clickRemove .

     Note If you are prompted to disable MSN Money Web access, follow these steps, and then repeat step 3.

  4. Click disable this Passport for use in money , and then clickNext. Again once, different versions of money show different dialog boxes - the key is that you want to delete automatically connect with your live account.
  5. Click Finish , and then wait for the process of change in the credentials to fill.
  6. Click OK .
  7. Output of money.

  Once you disable the passport for use in Money and restart, you can resume your access to all of your financial institutions.  You will not however be able to be synchronized with MSN Money, which is the purpose of doing in the first place. I found that you can always update your accounts as you have always done and during the stock market always automatically up-to-date.

• Upgrade Photoshop CS6 doesn't let me connect.

  Upgrade Photoshop CS6 doesn't let me connect.  When it is ready to download, after that I put in my serial number what it asks me to sign in however when I press the button I get a window that says "Adobe Application Manager has stopped working: a problem caused blocking the program works correctly."  Windows will close the program and notify you if a solution is available. "and makes me close the program.

  Try to contact Adobe Support by chat or phone when you have the serial number and activation problems.

  Here are some links to help get in touch:

  http://www.Adobe.com/support/chat/ivrchat.html

  http://www.Adobe.com/support/download-install/supportinfo/

• I plugged a Linksys router for my Hewlett Packard desktop computer, it shows that it is connected with great resistance, but it won't let me connect to the web.

  I connected the router to my computer desktop Hewlett Packard, it shows that it is connected with great resistance, but it won't let me connect to the web. I also have a mid/fi through Verizon set up on this computer, but I have recently installed Magi jack more and it uses far too much data for the MiFi. What should I do to fix this?

  Hello

  ·         What is the error message or the error code that you get when you try to connect to the Internet?

  ·         What is your Linksys router connected to an Internet service provider?

  ·         Were there any changes made to your computer until the problem occurred?

  ·         What version of the Windows operating system do you use?

  Click on the link below.

  http://Windows.Microsoft.com/en-in/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  To solve the problem related to the Magic jack plu and MiFi Verizon:

  I suggest you to contact Magic jack support. See the link below.

  http://MagicJack.com/customercare.asp

  Contact Verizon support. See the link below.

  http://support.verizonwireless.com/CLC/

  Provide us additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• CS5 save for Web doesn't let me save in the Windows volume

  I have a Windows Server 2003 volume mounted via the Services for Macintosh (AFP, SMB, no I'm pretty sure). Even if the Mac and the Windows volume can control independent of filenames longer than 31 characters, due to the sustainable management of FORESTS (I guess) I've never been able to record directly from any application to this volume of Windows with a > 31 char filename. This has never been a problem that I kept my short file names.

  After installing just CS5, however, save for Web is not let me save any file, no matter how the nickname: "names of more than 31 characters only are not supported on the destination volume. I can't save for the Web very well on my desktop and save under... the volume of Windows, but not save for Web for Windows volume.

  The save for Web is set to 'Pictures' only (no slices so it's only to create a single file).

  Any thoughts? Known issue?

  Thank you.

  Maybe that's part of what happens (and is not something like our names, internal files or anything else I recognize).

  It's probably something internal to save dialog box (NavagationServicesSavePanel), and it assumes that the file systems will be able to handle the long names.

  Again, via SMB to connect to the server may remove part of the restrictions.

  CS3/4 was based on carbon and used the different APIs for a large part of the file structure.

  CS5 moved to cocoa and has a new set of API files to process.

• Windows cannot connect to the printer. The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.

  A Windows Server 2003 Standard Edition SP2 32-bit computer is a field, the file and print server.

  A computer on the domain is a machine of Windows 7 Ultimate 64 - bit with HP DesignJet 500 24 printer connected via USB.  The printer is running the latest firmware.  The PC is running the latest 64-bit drivers with no problems to the host machine printing.  The host also has the latest drivers 32-bit (x 86) installed by downloading by other computers on the network.  The printer is configured to share with the share name of HPDJ500.

  Now, on a machine Windows XP Pro SP3 32 bit on the field, I'm trying to connect to the shared printer.  Add a printer > click Next in the wizard of > check "a network printer or a printer attached to another computer" and then click Next > click on "Find a printer in the directory", then click Next > click Find now > HPDJ500 in the list below (the XP machine can see the shared printer on the Windows 7 computer!) and click OK.  At this point, I get an error that says: "Windows cannot connect to the printer.  The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.  For more information, click Help. »

  Alternatively, if I right-click on the HPDJ500 printer listed, then click on connect, I get the same error message but I also see a separate window that says "Connecting to HPDJ500 on H2.ws.net" with the lively projector.  This window also disappears as soon as I clear the error message.

  Please note that this printer worked perfectly as a printer shared, hosted on a machine XP 32 bit on the field.  It works perfectly for the new Windows 7 64-bit machine, but we cannot connect from anywhere else on the network (including the server which translates the same exact error message).  On the server, I also preinstalled drivers thinking there was a problem with a 32-bit computer, trying to grasp the correct drivers from the host 64-bit Windows 7, but that doesn't change anything.

  How connect to this printer?

  Try using the path UNC path of the printer in the Add Printer Wizard.

  Add a printer > network printer > connection to this printer ((deuxieme point)

  Click next to browse (leave blank, the name field) or type the UNC path of the printer (i.e. \\Computername\Printername) path

• Trying to access a virtual machine using Blast and VADC configuration without a connection to the server

  Unless I misread this article , it should be possible.

  It is true that step ' not is not particularly clear, but I'm assuming they meant put the content of all unzipped in a folder called 'portal' on the folder root of IIS (C:\inetpub\wwwroot\portal\). In any case I tried this and create a virtual directory in IIS called 'portal' with the wwwroot files, all two complain that there is no such thing as MainUI.html (and it's not! Learners, I can't find this file on a connection or Security Server - which leads me to believe it is generated by one of the .json files)

  Anyone could pull this off? Any suggestions as to where I have gone wrong?

  You can do this by locating the file portal.war on the login server and copy it to the virtual desktop running VADC in view. The procedure is on page 18 of the VADC Administrator's Guide.

  We will make this procedure easier by allowing this portal.war file be downloadable via VMware-Horizon-View-HTML-Access-y.y.y-xxxxxx.zip instead of first needing to install a connection to the server, but for now just copy the file portal.war and unzip it.

  Mark

• Photoshop rpet 'attempts to connect to the server.

  When I try to install Photoshop, it guard saying "trying to connect to the server" for a long period and rest in the same place. Help me please?

  Hi Abel.

  Please go through the link and try the Solutions listed sign in, activation or connection errors. CS5.5 and later, Acrobat DC

  If it doesn't solve the problem.

  Here's a similar Post that might help you resolve the issue.

  Photoshop continues to try to install an update and said "trying to connect to the server" and it is permanently stuck there and does not work, someone has an idea how to please?

  Let us know if this helps

  ~ Assani

• 'Unable to connect to the server' msg on Palm Pre to the IMAP e-mail server

  I am trying to connect to a server of Courier IMAP on my Palm Pre. It happens to be a Lotus Domino 7 server, but I don't think that is relevant, unless someone can suggest a better Protocol IMAP (don't want to use POP, because I want access to records). I was able to use it very well on my Palm 750 (Win Mobile) and now for the test, on Outlook Express as a Windows client, so I know that the IMAP server does not work correctly.

  On the Meadow, when I press the "Sign In" button at the bottom of the page of manual configuration of account, I always get the message:

  Error

  Unable to connect to the server

  I am able to sync the Pre with EAS system based on Zimbra to my business and my personal Google gmail account without any problem.

  On the Meadow, in the manual configuration of the account, I entered

  E-mail type: IMAP

  nom_ordinateur.nom_domaine.com

  user name [no @domain.com]

  password

  Port: 143

  Encryption: no

  [And yet once again, I know that the values that I have entered are correct, because I just enter values in Outlook Express and it worked fine.]

  He actually let me same hit "Sign in" until I set up outgoing mail server also (which seems weird and as a minor bug - it should let me retrieve messages, even if I don't have an available SMTP server to send responses). So, I also implemented the mail out with authentication server. I don't know I have a valid for sending SMTP system, but let's assume that is not related to the error, as I just want to do my incoming mail and be able to deposit in the IMAP folders respective, at least for now. I'll worry send later.

  Initially, I left the empty root folder option. I also tried to put a "/" (single, slash, ignore the quotation marks) in there. No effect.

  (Question on semi - the Pre does support multiple connections EE without getting confused? In general (on Win Mobile anyway), you can only have 1 per device. If it was an option on the Meadow, perhaps I could empty Domino in favour of another Exchange Server, but this would be a term much more time here, I hope with my IMAP question).

  Thanks for any help,

  Colin

  It seems that you need a smtp server configuration that is valid for the step of the link set.  In the test here, if the SMTP connection is refused/incorrect login it will not create the account (verified by looking at the packet stream, newspapers of IMAP connection fine, SMTP connection refused, account refused on the Meadow).

  So now, it seems that you need a valid SMTP server in order to create an account.

• iPhone cannot connect to the server to iCloud

  Hello!

  My son IPhone cannot connect to the server iCloud. App Store is not available. In the iTunes and App Store from the settings app, I can't log in. IPhone resetting is not possible. Restore from iTunes on Mac is not possible, because find my iPhone is active on the iPhone, and it cannot be turned off, because in the pane of the application of the iCloud settings can't do anything until I have to accept the new terms and conditions, which cannot be made.

  WiFi on the phone works great with Safari, Mail, but cannot get new e-mail messages. The weather application does not connect.

  His iPad that is connected to the same iCloud account has no problem and there is no problem to connect to his account on iCloud.com.

  I tried to restart and reset hard iPhone and updated to 9.3.4 via iTunes on Mac (which went without pain, but doesn't change anything).

  Any help much appreciated!

  Does anyone have advice at all...? Aside from throwing the thing?

• Help! Safari cannot connect to the server

  I really need help! I tried to forget the network and turning it back on, I have disabled the firewall and remove all extensions of safari. I seems that nothing works.

  I get the message 'Safari cannot connect to the server' on almost every site except this and facebook. I can't enter same Urbanoutfitters.com or ASOS. I just got the message "Safari could not connect to Server" I'm not a computer genius so hopefully someone here can help me...

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• Firefox beta 9, coming continuous update window, click on update, but it nevers connects to the server, the link 'click here for more information' is dead.

  I go about Firefox and click on the updates button control the browser downloads the update, I restart Firefox and behind the browser window is a window that says: it is strongly recommended that update Firefox. It is also a link to get more information about this update. The link is not responding, so I click on 'Next' and connect to the server and it never connects. I let it run all night and it connects. I get this window even after that I updated to Firefox. How can I do that, go away? Is this a legitimate Update window or something try to redirect to a malicious site?

  In fact, the window just jumped upward once again, as I was typing this message.

  If there are problems with the implementation at day then best is to download the full version and uninstall the currently installed version and remove the Firefox program folder to remove all remaining files.

  Download a new copy of Firefox and save the file to the desktop.

  • http://www.Mozilla.com/en-us/Firefox/all-beta.html

  Uninstall your current version of Firefox if possible and delete the folder of Firefox beta program to remove all remaining files.

  • Do NOT remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Computers stops after the connection to the server

  Hello geniuses.

  I'm having a strange problem and I know it won't be easy to diagnose, but let's give it a shot.  I have two iMacs in my studio, a 4 k and a 5 k, with El Capitan 10.11.2 and both connected to an ethernet network and talk to a server on a Mac Mini (latest OS and OS X Server).

  I mention the server, because I think it may be interesting, but that's just a guess.

  Basically both of these computers have a strange inability to stop.  You choose stop and they go through the motions all the way to the black screen with the toothed wheel turn, and then it just lingers there.  Forever.  Well, at least 24 hours because it is the longest, that it went unnoticed at the time.  Usually, I wait a few minutes and then make a stop of the force.  (I wait a few minutes because sometimes, not often, but sometimes, the computers will be correctly closed.)

  Both machines are wired on the server and use frequently shared fire (SMB and AFP) to load files on networked drives.  Yet once again, I mention this because this is the common point between these machines that seems to be the exception to a common use, and I wonder if the connection to the server is the process that prevents computers from closing properly.

  If anyone can help point me in the right direction would be great.

  Thank you!

  Well I guess this problem is unique to me, however, if someone else liquidate the same problem, I think I have it solved.  I changed the file sharing preferences to just AFP (disabled SMB).  This seems to have solved a variety of issues that I had with my network, including iMacs hanging on closing down.