My router does not correctly ping

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
C:\Users\I LOVE U DI DARLING > ping 192.168.2.1
Ping 192.168.2.1 with 32 bytes of data:
Reply from 192.168.2.1: bytes = 32 time = 2ms TTL = 64
Reply from 192.168.2.1: bytes = 32 time = 2ms TTL = 64
Reply from 192.168.2.1: bytes = 32 time = 2ms TTL = 64
Reply from 192.168.2.1: bytes = 32 time = 2ms TTL = 64
Ping statistics for 192.168.2.1:
Packets: Sent = 4, received = 4, lost = 0 (0% loss),
Time approximate round trip in milli-seconds:
Minimum = 2ms, Maximum = 2ms, average = 2ms
C:\Users\I LOVE U DI DARLING > ping 192.168.2.1
Ping 192.168.2.1 with 32 bytes of data:
Reply from 192.168.2.1: bytes = 32 time = 2ms TTL = 64
Reply from 192.168.2.1: bytes = 32 time = 2ms TTL = 64
Reply from 192.168.2.1: bytes = 32 time = 2ms TTL = 64
Reply from 192.168.2.1: bytes = 32 time = 4 ms TTL = 64
Ping statistics for 192.168.2.1:
Packets: Sent = 4, received = 4, lost = 0 (0% loss),
Time approximate round trip in milli-seconds:
Minimum = 2ms, Maximum = 4ms, average = 2ms
C:\Users\I LOVE U DI DARLING > ping 192.168.2.200
192.168.2.200 ping with 32 bytes of data:
Reply from 192.168.2.200: bytes = 32 time = 3ms TTL = 64
Request timed out.
Reply from 192.168.2.200: bytes = 32 time = 3ms TTL = 64
Reply from 192.168.2.200: bytes = 32 time = 2ms TTL = 64
Ping statistics for 192.168.2.200:
Packets: Sent = 4, received = 3, Lost = 1 (25% loss),
Time approximate round trip in milli-seconds:
Minimum = 2ms, Maximum = 3ms, average = 2ms
C:\Users\I LOVE U DI DARLING > ping 192.168.2.200
192.168.2.200 ping with 32 bytes of data:
Reply from 192.168.2.200: bytes = 32 time = 10ms TTL = 64
Reply from 192.168.2.200: bytes = 32 time = 3ms TTL = 64
Reply from 192.168.2.200: bytes = 32 time = 1ms TTL = 64
Reply from 192.168.2.200: bytes = 32 time = 2ms TTL = 64
Ping statistics for 192.168.2.200:
Packets: Sent = 4, received = 4, lost = 0 (0% loss),
Time approximate round trip in milli-seconds:
Minimum = 1ms, Maximum = 10ms, average = 4ms
C:\Users\I LOVE U DI DARLING > ping 192.168.2.200
192.168.2.200 ping with 32 bytes of data:
Reply from 192.168.2.200: bytes = 32 time = 5ms TTL = 64
Reply from 192.168.2.200: bytes = 32 time = 3ms TTL = 64
Reply from 192.168.2.200: bytes = 32 time = 3ms TTL = 64
Reply from 192.168.2.200: bytes = 32 time = 2ms TTL = 64
Ping statistics for 192.168.2.200:
Packets: Sent = 4, received = 4, lost = 0 (0% loss),
Time approximate round trip in milli-seconds:
Minimum = 2ms, Maximum = 5ms, average = 3ms
C:\Users\I LOVE U DI DARLING > ping 192.168.2.200
192.168.2.200 ping with 32 bytes of data:
Reply from 192.168.2.200: bytes = 32 time = 907ms TTL = 64
Reply from 192.168.2.200: bytes = 32 time = 6ms TTL = 64
Reply from 192.168.2.200: bytes = 32 time = 3ms TTL = 64
Reply from 192.168.2.200: bytes = 32 time = 2ms TTL = 64
Ping statistics for 192.168.2.200:
Packets: Sent = 4, received = 4, lost = 0 (0% loss),
Time approximate round trip in milli-seconds:
C:\Users\I LOVE U DI DARLING > ipconfig/all
Windows IP configuration
Name of the host...: ILOVEUDIDARLING
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.
Bluetooth network connection Ethernet card:
State of the media...: Media disconnected
The connection-specific DNS suffix
. :
... Description: Device Bluetooth (personal area network)
Physical address...
. : 00-26-5E-DF-BF-F1
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Wireless network connection Wireless LAN adapter:
The connection-specific DNS suffix. :
... Description: Dell Wireless 1397 WLAN Mini Card
Physical address.... : 0C-60-76-0B-BB-8E
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::fca2:dd8:de36:24dc % 11 (Preferred)
IPv4 address: 192.168.2.100 (Preferred)
... Subnet mask: 255.255.255.0.
Lease obtained...: Monday 3 December 2012 13:03:46
End of the lease...: Tuesday 4 December 2012 13:03:48
... Default gateway. : 10.10.10.1.
192.168.2.1
DHCP server...: 192.168.2.1.
DHCPv6 IOOKING...: 202137718
DHCPv6 DUID customer...: 00-01-00-01-18-3D-9D-2F-00-25-64-4E-62-4B
DNS servers...: 192.168.2.1.
NetBIOS over TCP/IP...: enabled
Ethernet connection to the Local network card:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Marvell Yukon 88E8040 PCI-E Fast Ethernet
Controller of
Physical address.... : 00-25-64-4E-62-4B
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Network adapter Ethernet VirtualBox:
The connection-specific DNS suffix. :
... Description: VirtualBox Host-Only Ethernet adapt
Physical address.... : 08-00-27-00-00-2E
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::2d38:a401:a662:ae85% 18 (Preferred)
Autoconfiguration IPv4 address. . : 169.254.174.133 (Preferred)
... Subnet mask: 255.255.0.0.
... Default gateway. :
DHCPv6 IOOKING...: 554172455
DHCPv6 DUID customer...: 00-01-00-01-18-3D-9D-2F-00-25-64-4E-62-4B
DNS servers: fec0:0:0:ffff:1 1%
FEC0:0:0:FFFF:2 1%
FEC0:0:0:FFFF:3 1%
NetBIOS over TCP/IP...: enabled
Tunnel adapter isatap. {39FBB145-05ED-43E9-A687-CB0C92FE087F}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft ISATAP adapter
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
Tunnel adapter isatap. {56C60401-8681-45C1-8943-0A936C7FF74F}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Adapter Microsoft ISATAP #2
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
Card tunnel Teredo Tunneling Pseudo-Interface:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
Description...
. : Teredo Tunneling Pseudo-Interface
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
Tunnel adapter isatap. {FB6ACE66-A350-4D7B-BE23-261F2818F22D}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Adapter Microsoft ISATAP #3
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
Tunnel adapter isatap. {B7455C4C-CCFB-438B-8D40-8A0DF55FDBD3}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Adapter Microsoft ISATAP #4
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
C:\Users\I LOVE U DARLING DI >

There's at least one thing wrong... but it's not ping your router:

Wireless network connection Wireless LAN adapter:
The connection-specific DNS suffix. :
... Description: Dell Wireless 1397 WLAN Mini Card
Physical address.... : 0C-60-76-0B-BB-8E
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::fca2:dd8:de36:24dc % 11 (Preferred)
IPv4 address: 192.168.2.100 (Preferred)
... Subnet mask: 255.255.255.0.
Lease obtained...: Monday 3 December 2012 13:03:46
End of the lease...: Tuesday 4 December 2012 13:03:48
... Default gateway. : 10.10.10.1.
192.168.2.1
DHCP server...: 192.168.2.1.
DHCPv6 IOOKING...: 202137718
DHCPv6 DUID customer...: 00-01-00-01-18-3D-9D-2F-00-25-64-4E-62-4B
DNS servers...: 192.168.2.1.
NetBIOS over TCP/IP...: enabled

Most home networks should not have two "default gateways', and in particular a single NETWORK card should not have two of them.  Did you do that deliberately?  The second default gateway is connected to your virtual machine?
Multiple default gateways can cause connectivity problems
Configuring multiple gateways on a network

Tags: Windows

Similar Questions

  • with firefox 43 yahoo and yahoo mail doesn't work does not correctly

    With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

    I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

    Thanks for the help!

  • disc eject does not correctly persist

    I get several error messages that my external hard drive was not ejected correctly. I ejected it, turned off, unplugged and then reverse the process. Whenever my screen locks when I open it there are several messages not eject disks does not correctly.

    Restart your Mac, and then drag the disc on the desktop for the external drive to the trash.

  • HP jet 7500 a desktop: office jet 7500 a print does not correctly

    Hello
    After you run the print doctor, cleaning and aligning the print heads that it is still print does not correctly. the first page comes out perfect so the print quality gets worse, with bits wilted and things missing. just print a page of print quality and black looks at all and the first steps of pink and yellow are strong, blue stripes and then 2nd very faded pink and yellow bar.
    any ideas?

    Hey watch this video of HP, how do I solve this https://www.youtube.com/watch?v=c422Q-EhMXI if this fixed your problem can you give me a point of congratulations. Thank you

  • I have an index page that does not correctly load the css and css works on all other pages of the site.

    http://www.boulderridgecondos.com/ does not correctly load the css, but all other pages of the site loading the css correctly. There is nothing (that I can identify) between pages.
    http://www.boulderridgecondos.com/news.htm

    I guess something is wrong in the css, I inherited this site and have exceeded the css but can't find a problem that would cause this to happen.

    Any help or suggestion looking for something would be appreciated.

    This page is saved in UTF-16 format (Content-Type: text/html (UTF-16 BOM, litte-endian)) in your text editor. The CSS file is sent as ISO-8859-1. Firefox fun to see all the files in the same encoding. The other pages are send as ISO-8859-1 and so use the CSS file. You will need to re - save this page as ISO-8859-1 and download the corrected version.

  • Satellite A200 does not correctly reduce or increase the volume

    Hello

    Our Satellite A200 is having problems with its Volume control wheel.
    If I turn the wheel (on the left or in the past), it does not correctly to reduce or increase the volume level.
    He jumps rather the volume level in seemingly random directions (with a preference for the volume).
    Turn the wheel slowly improves responsiveness a little, but it remains quite impossible to increase or decrease the volume control that to be.

    BTW, I am well aware that the volume control wheel is a wheel of puls-encoder rather than ye olde potentiometer.

    -Can anyone you tell me where I can find the configuration that is responsible for this Volume control wheel?
    -Which driver/firmware is attached to the order of the volume control?
    -How can I determine if this is a hardware or software problem?

    Advice would be welcome.

    Stephan

    Hello

    There is no software or hardware problem.
    It is a new generation of volume control.

    First of all there is no mechanical limit turning right or left.
    In addition, this volume controller works a little different than the old volume controllers. The volume can be increased and decreased using the fixed rate

    By the way;
    > Can someone tell me where I can find the configuration that is responsible for this Volume control wheel?
    You can change the volume as in the sound settings that could be found in the control panel.
    > Which driver/firmware is attached to the order of the volume control?
    Audio driver controls the volume controller.
    > How can I determine if this is a hardware or software problem?
    There is no problem

  • error code 259 does not correctly updated to sp62736.

    I have a Hp Pavilion 500-141ea im trying to update the IDT audio driver for windows 8, I supported SP sp62736, it passes through the installation procedure, then it stops and comes up with this error code 259 does not correctly updated, I even disabled etc still the same antivirus software.

    Any idea?

    Hi Apache1968,

    If everything works at the moment, with the exception of downloading then I would leave it as it is. The whole "don't mess with what works" thing.

    Thank you

  • Why is one of my 4 5893 Modules doesn't work does not correctly?

    Hello

    This is the configuration of my HW and SW:

    LabView 2013 SP1

    1 x cRIO 9076

    4 x NI 9853 CAN Modules

    CAN0 - 1000 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

    CAN1 - 500 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

    I worked on a program for a test system, where each Module 9853 control two devices (CAN0 and CAN1), the same type of systems is controlled by other 9853 3 Modules in parallel.

    So basically, I use exactly the same functions for each module. So far, everything has worked correctly on module 1, but now that I started to test all other modules I have the problem that Module 3/CAN0 does not correctly read the information.

    While watching the FPGA façade, I see that each 10000ms one value is read, but only on that ONE module (frames are sent every 1ms from my unit)

    I tested the HW itself using the included examples and it works correctly, the only difference is that the example used only 2 Modules, one to send data and the other to receive it.

    I included my FPGA program as an image, I really don't think there is a problem with my RT SW, because all the other modules are working properly. Basically, my SW FPGA bed CAN Modules and puts the information in a FIFO, if there is an error (no information), it will make a loop once more and check again.

    Thanks for your help

    I solved the problem, it was an error of configuration on my side.

    The entry for Module3 CAN1 time-out was set up NOT as 0ms and 10000ms as I thought! , so that was my reading for DUT3 loop run only every 10000ms.

  • Update KB976902 now the mouse doesn't work does not correctly

    I had the KB976902 recently updated on 2 of the 3 computers and 2 who got now have a mouse that does not correctly.  The computer number 3 does not have the update and still works fine.  All three are almost identical hardware and software and have legitimate versions of windows 7.

    The problem of the mouse made play almost almost impossible. Left click crashes, lag mouse click one or two times when I I try to do a restore from the left eventually drag a shortcut of the thing, I clicked on and don't know how or why.

    I did a restore on a single computer, but it did not help.

    Norton and McAfee applications are notorious for not to uninstall (or upgraded) themselves. Since you are not sure, I'll have to have executed two removal on all of the computers in question tools.

    NB: If a step said to reboot, reboot!

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. right click on the file saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

    3B. right-click on the file saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

    4 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

    5. open Internet Explorer 32-bit (only!) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

    6. restart a last time & test.

    ~~~~~~~~~~~~~~~~~~~~~~~~
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Acer site does not correctly display the specification.

    Acer site does not correctly display the specification.

    Example when you click on the link on M5 Explorer - 581 T-6405 please as to the specification of the model of S7-191-6447. Please check

    Thank you bring to our attention. We will ensure that it is transmitted.

  • My computer does not correctly display web pages?

    On some web pages the boxes are stacked, for example on the MSN homepage ads pop up in the left corner of the screen on the top of the page instead of on the right side, and on the right hand side where they should be it's an empty box? Other pages display does not correctly? I don't know how to fix this or why it happened?

    Hi ChristineDupre,

    1. what browser do you use?

    2. don't you make changes on your computer before this problem?

    If you use Internet Explorer, you can follow these methods & check if it helps.


    Method 1

    You can follow this link and check if the problem persists.

    Some sites Web may not behave as expected in Internet Explorer


    Method 2

    If you have Internet explorer 9 installed, please follow this link.

    Web pages displayed incorrectly in Internet Explorer 9

    Hope the helps of information.
    Please post back and we do know.

  • Router does not not after installing updates

    I installed the updates on my computer and the next morning my wireless does not work!   I can go on the internet when I plugged my ethernet cable.  Whenever I try to go on the internet without being plugger to the ethernet cable that wireless network connection not connected, he said.  Already contacted AT & T to know is that they were having DSL problems in the region, but they said no.  Apparently my router does not work after I made my Microsoft Updates.

    Hi Racer29,

    -Who were the updates (KB) that you have installed?

    Does restoring the system to a point when it wireless was working and install the updates one by one. Restart the computer after installing each update and check the update at the origin of the problem.

    See How to restore Windows XP to a previous state

    Gokul - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • My ipod does not correctly install when I plugged in now mobile USB keeps freezing

    My ipod does not correctly install when I plugged it into USB. Since then, my laptop keeps freezing / crashing.  Start repair found the problem mentioned but could not fix it and just send an error report.

    I tried restoring the system and installed the updates of windows, but I still have the problem. I reinstalled itunes and my AV is up to date, I can't find a solution.

    Hello

    1. are you confronted this question all the time or only when using the IPOD?

    2. What is the brand and model of the computer?

    3 Please, try to connect the Ipod to different USB ports in the back and the front of the tower and check if you face the same problem.

    Please follow the links below to solve the problem.
     
    Method 1
     
    Start your computer in a clean boot and check for conflicts with third-party software.
     
    Start your computer in a clean boot.

     
    Note: Please follow step 7 of the article mentioned below to start the computer normally, after completing the necessary troubleshooting.
     
    Method 2

    Step 1

    What is safe mode?

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-safe-mode

    Step 2

    Install this update and check if the problem is resolved.

    Update for Windows Vista (KB925528)

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=620

    Also try to update the latest version of the drivers your controllers USB host, on the manufacturers site.

    I hope this helps.

  • HP 8600: HP 8600 does not correct tray

    Hello. I'm having trouble with my HP 8600 is not pulling from the correct tray. This is a recent problem that everything was working properly until a few days ago. I have an accessory to two tray with tray #1 used for special dimensions (photos and envelopes) and standard #2 to 8.5X11paper tray.  I have the default to tray #2 and locked bin #1 in my settings (#1 on the top tray, tray # 2 down). However, when I send a print job for normal letter format, he tries to send the job to use the Tray #1. I can get around this by changing the trays, but it is a real pain and much slower. I checked all software and firmware is up to date. I hope someone has a solution for this problem.

    Hi @Desertboy,

    Thank you for joining the HP Forums!

    I have seen your post on how your printer HP Officejet pro 8600 does not correct status bar. I'm happy to help with this problem!

    Follow these steps to change the print settings by default for all printing from the desktop of Windows 8.

    1. Right click or touch and hold the bottom left of the screen to open the menu. In the menu, click or tap on the Control Panel, then click on or type printers and display devices.

    2. Right click or tap and hold the icon of the printer () for your printer, and then click or tap Print Preferences.

    3. Select your new default print settings, and then click or tap on OK.

    Source: change of print settings (Windows 8).

    I would use these settings to set the default to tray 2 for plain paper. So if you want to print to Tray 1, you can change the settings manually. Or, you can add the same printer again in the devices Panel and printers and together this is the default for Tray 1 for specialty paper and rename it to 8600 (Tray 1) as an example.

    If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

    I hope these settings help!

  • Brand new Dell 2808 router does not work.

    1. the 2808 is not connected to the internet.

    2. when it is received, the 2808 under tension with the disabled DHCP server and port active routing. It is the default setting. Not good to use normal, but worked as advertised. The DHCP server is usually needed in a small switch. I needed an active DHCP service.

    3. I've changed managed and connected fashion. A "saved to restore configuration screen" appeared. Horrible thing. Trashed the router. There is no saved configuration, the 2808 restarts. 2808 completely stopped working after that.

    4. after resetting 2808, the 2808 seemed no longer routing packets, so nothing works now with the exception of the web client, which does not seem to do anything for the networking.

    5 I did activate the DHCP client and configure the IP pool. However, no routed packets, nothing works. Port au port data routing does not work. The DHCP server is not required to allocate IP addresses.

    6. I paid 80 dollars to a so-called "Dell Customer Service" held to solve the problem. They have failed. It turns out that they did not know how to work the 2808.

    7 I have not understood how to contact customer service the Dell directly for the 2808. Not good. I bought a T7810 workstation in 2015 with 5 years of service from Dell, and I don't know how to contact Dell support technical support. I use the 2808 with the T7810. Both should be covered if the customer service could be found.

    8. bottom line, I bought the 2808 on July 27, 2016, and many hours later my effort and more hours of a consultant, I am frustrated trying to run home mode: a router 8-port 1000-baseTpacket with a DHCP Server enabled. I'm about to box 2808 router back to Amazon because it does not work and cannot be implemented.

    Any ideas?

    Thanks in advance to 1 million.

    Keith

    The simplest method to contact support is to enter the serial number on our support site.
    http://Dell.to/20VqlwQ The site will then list the various methods to contact support for this range of products.

    The 2808 PowerConnect doesn't have a console port, so recovery is somewhat limited. If the switch is on firmware version 1.0.0.38 or earlier, then a factory reset can be done by simply changing the transition from managed to not managed and then again. If the switch is on more recent firmware, however, this process does not reset the switch to factory default.

    Being a new switch, it should be under warranty. If the switch is not recoverable, support should be able to get a replacement sent to you.

Maybe you are looking for