My sansa clip has a foreign language on the menu screen

Similar Questions

• How can I create an intro clip that plays when before inserting the menu screen in PE7?

  I PrE7/PSE7 and want to create a dvd where during the insertion, it will play a clip short introduction before moving on to the main menu.  I did some tests and was not able to make it work.

  First, a play that precedes the main Menu is not possible in pre. One needs to use an another design program, such as Adobe Encore, which, starting from CS3, supplied only with PrPro or Sony DVD Architect. PrE has some limitations.

  Sorry,

  Hunt

• How to change the language of the Welcome screen

  Hello

  I put windows 7 password when I put the password, the language was Arabic. After that, I changed the language to English. Now I can't type my password and therefore cannot access my account. Please give me a solution

  Kind regards

  Christèle

  Hi Alex, if you cannot access the menu language of the splash screen then you might be looking at a recovery/repair operation: http://windows.microsoft.com/en-us/windows/what-are-system-recovery-options#what-are-system-recovery-options=windows-7

• Disable the language on the logon screen

  Hello

  is it possible to disable a language on the login screen of PeopleSoft PIA? I know that I can change the signin.html for does not the ability to change this language, but which would be incomplete since the language is recognized automatically. For example, when a timeout occurs and a user is disconnected, the warning page promting the user connect is in the language automatically. How can I change this behavior? I want to only keep ENG as the only available language. I believe that this will not be configured so the application PS itself, rather, I need to change java scripts and use html pages for weblogic.

  I'm on PeopleSoft 9.2 and 8.53 PeopleTools, running Weblogic 10.3.6 I think.

  Thank you very much for the input.

  Take a look at

  E - PIA: in PT 8.50, end users see "language that you have selected is not enabled for this database." Error. (Doc ID 988042.1)

  Kind regards

  Bob

• How to change the language of the Server screen?

  Hi all

  How to change the language of the Server screen? I got in Japanese and I would like to turn it into English.

  Thx for your help,

  We use Japanese strings only when your server locale is 'jp': FindNoCase ("Japan", GetLocale()) NEQ 0. So you may not be able to individually change the flash client server monitor, but there are two ways to return to English at the server level

  (1) check your locale of the server and change it to something else than Japanese.

  (2) rename smresource_en.xml in smresource_jp.xml in CFIDE\administrator\monitor (take a backup).

  Thank you

  Chandan Kumar

• I upgraded the firmware Sansa Clip & now I don't see the files I had previously in

  Hi guys, this is my problem: I have a sansa clip v2, it worked fine until yesterday, when I updated the firmware with sansa updater; the upgrade went smoothly, but now my windows xp sp3 detects the drive because it was a normal penstick/external hd and I cannot see the files I already had in it: I can still listen to their - players works as usual - but, as I don't see them, I can't delete them! I tried the "hidden and system files" in folder options, but it did not help. I think that after the upgrade of the internal structure of the file has changed a bit, now it is: sound, music, audio books, podcasts, record, WMPinfo.xml, MTABLE. SYS, RES_INFO. SYS, SYS_CONF. SYS, version.sdk. I try to put a few new files in the folder "music" and it works perfectly, they appear in the player, so the problem is only with the 'old'; in fact, I would not delete them mind these files if it is not necessary, because I have them on my hard drive).

  I hope someone can help me, thank you very much! (and please excuse my bad spelling & grammar, I'm Italian!  :-))

  1. pick up your player Sansa Clip - the physical drive you bought.

  2. activate.

  3. press the small 'home' button, the small button on the front of the item located at the top right of the Ferris wheel - it's the small button with the little house printed on it.

  4. press on the lower part of the wheel (at 06:00 position) until the screen shows the settings.

  5. press once on the right side of the wheel (at 03:00 position) to access settings options.

  6. press on the lower part of the wheel (at 06:00 position) until the display shows USB mode.

  7. press the right side of the wheel (at 03:00 position) once to enter USB mode options.

  8. tap up or down the Ferris wheel (at 12 and 06:00 positions) and select the USB setting menu is currently not checked (I think that this will be the PSG; ignore the setting "Auto", for the reasons I stated above), then select it by pressing the right side of the wheel (at 03:00 position).

  9. you have now set your video mode MTP USB drive.  Press the small home button twice to return to the regular game mode.

  And that's all.  Now when you connect your player to Clip on your computer, your files should appear on your computer.  If they don't, repeat the above, but set the USB to the MSC mode.

  I hope this helps.

  PS As I said earlier, the USB modes, the MSC mode (compared to the MTP mode) is more universal and will work on multiple computers.  If you use a video player on other computers, you can set your video player in MSC mode, to ensure that it will connect to other computers.  If this is the case and if your video player has been set to MTP mode so far, before changing the setting of mode USB mode MSC, to be able to see all files in the reader of your video on your computer, first copy the files from the drive of your music back to your computer delete them out of your video player, set the Clip Player USB Service mode weather of the Canada (see above) and then copy the files to your video player.  This ensures that you can see all the files of your video player when it is connected to your computer.

• Sansa Clip freezes at startup and on the firmware update

  After unplugging my video to my computer, it is hung on the screen "Connected".

  I forced a reset by pressing the power switch it 10 seconds

  He then restarted and hung on the Sansa screen

  I followed the instructions given in these forums in order to download the update of the firmware, mount the Clip in MSC mode and install the firmware.  Unplug the Clip, it hangs at "Update Firmware in progress" screen.

  I then re-mounted the Clip in MSC mode and deleted all the files of music and the update of the firmware.  After disconnection, he hooked again on the Sansa screen.  I then mounted in MSC mode and re-installed the update of the firmware.  He is now suspended again at the screen to update the firmware.

  Any suggestions would be greatly appreciated!

  The following procedure restored the Clip, but requires access to a Windows operating system:

  1. Tower Mounting Clip in MSC mode off camera (now switch is in position 10 sec If necessary 'on'). Set the switch to position 'Hold '. While pressing the "Select" Center, plug it into the USB port on a Windows computer. Wait for Windows to recognize the device before you release the "Select" button

  2. format of the Clip Double click on 'My Computer' to open a window of the Explorer. You should now see the video listed as a reader. Right click on the video player icon and select "Format". Select "FAT32". Do not check the box "quick format". Format the drive.

  3. Finish you can now disconnect the Clip of the computer and it should behave as a Clip of the new out-of-the-box. If you wish, you can download Sansa Updater software from the web site of Sansa (Sansa > support > Clip > downloadsansa Firmware Updater) and run it to install the latest version of the firmware on your device.

• Sansa Clip 2 GB shows "Connected" when the charger is plugged

  I have a Sansa Clip 2 GB is around the age of 6 months.  He played very well for 5 months, but for the last month, he periodically left the game and shows 'Connected' when the charger is connected.  I can sometimes turn off and on and it will start working again.  He will play for awhile, sometimes minutes, sometimes a few days and then stop playing again and see the "connected".  When he is in this state it will load but not play.  I tried 3 different Chargers and all have the same problem later.  I updated the firmware of 01.01.32 but no help.

  Someone knows how to fix this?  TIA for any help.

  OK, here is the last, this problem is resolved, but he caused a new sorta related problem.  What I did I deleted all my files and just put all the songs in the Music"" folder.  This seems to have solved the problem where it says 'connected' and stop playing, however, now it plays a day or two and then stops himself.  I just press 'Play' and he starts going again, so it is not much more than an annoyance I can live with that, and I could see where maybe he could do so on purpose after she played all the songs, but why it not it that way when I got it?  He played continuously day and night for months as a first step.  I'm confused, but I can at least live with the Clip now.

• Sansa clip-drag & drop shockwave object corrupts - the error of the operating system "refreshing database".

  If by mistake, you drag and drop an object flash shockwave from your local directory from the PC to the sansa clip, corrupt you the operating system of the sansa clip. When re - start the sansa clip, clip progresses by up to 70% with error message "refreshing database", but fails to start successfully. If the press-'hold' button on sansa clip, the appliance does not start. It crashes with the error message "refreshing database' but doesn't load is not the operating system.»

  It was a user error to drag - move all the MP3 files in the directory of the PC, one of whom was of type shockwave flash object file.

  Help!

  André

  Try the clip board.  This is the map of the e200 series.

• FDM - errors with characters of foreign language in the charge files

  For our data Netherlands import file, our descriptions of the source account contains the character 'e '. The decription of account is not charged at HFM, but we receive error messages when you import. Is it possible to ignore the foreign language characters? Another post suggested 'Administration', ' configuration settings: ', 'Type of coding file' then 'Unicode' value, but the version that I use does not have this option. Version is 11.1.1.3.
  
  Thank you!
  Melody

  Make sure that your file is saved as "Unicode" file format, and then retry the import process.

  (a) open the file in a text editor such as Notepad
  (b) choose file > save as
  (c) select the encoding of the file "unicode".

• Sansa e280 is not usb mode in the menu settings and is not recognized by pc

  My sansa e280 is recognized by my pc where it was originally regestered, but is not recognized by another identical pc. It also has no usb mode in the settings menu, so I couldn't use the suggested by forum solution.

  Thank you very much! I understand it on my own through the main page of Sansa.com. Now, after the last firmware download it has 3 settings/USB modes: detect the DPW, msc and auto. Still no problem on my PC. The another, unfortunately, is 5000 miles away. Hope, it will work here, too. Thanks again.

• How can I change the language of the menu?

  I just installed Firefox, and the menu I receive is in Thai language. I can't seem to find a way to change English menu. Help, please. I use Firefox 42.0 and Mac OSX 10.11.1

  Thank you.
  Vira

  To choose your language, download from this page:

  https://www.Mozilla.org/Firefox/all/

  Now, I'm not a Mac person, but I understand that to pass one version of Firefox to another, you 'trash' current application of Firefox - without removing data to personal or settings - and then install a new.

  But you can wait for a Mac person confirm the details.

  See also: How to download and install Firefox on Mac

• Sony NEX - 3 does someone knows how to change the language of the menu?

  Hello. bought an invisible viewfinder of the NEX-3... it turns out that the case was too good to be true, because it is a Japanese model (takes great photos!) Downloaded the NEX - 3V5_Update1112a.exe, but do not want the camera in brick. Am I able to run firmware update so that it will turn the menu in English? If not, how I'm able to get the camera to disply the menu in English?

  Hey yliess thanks for the comments. It's what the English user manual said, so on the right track... in the menu of the camera is in Japanese, it is a challenge to follow in English. Went on to translate the instructions below for Japanese but could not match the characters. Assuming that the menu options are in the same place, please let me know how many choices for scroll down in the 'Menu' then? 3? up to "Setup" then? 3? up to "Main Settings" then? 2? Up to "language".

• language of the menu dnf 1536

  Hello

  My 1536dnf printer is stuck in a language I can't read (thai I think). Can someone help me with the key sequence to English?... being unable to read the characters means that I can't navigate the menu at all.

  Any help much appreciated.

  All the best,

  Ben

  Hello.

  The sequence going blind (not having is not the printer in front of me) would be:

  • Setup
  • 3 x right arrow - OK
  • Ok
  • and then click the arrows until you find the English.
  • Ok

  See you soon!

• SanDisk sansa e280 V1 keeps looping (stucks) on the spalsh screen

  Hello

  I had a serious problem with my Sandisk e280... The other day I was listening to just when all of a sudden my mp3 restarted without any warning... now it's keeps looping on the home screen (black screen and "Sandisk" in white letters). Normally after the splash screen, you will see the main screen (menu), but my screen goes white then leaves (splash screen).

  Someone at - it suggestions?

  Thankss!

  Try:

  1 - holding the power button for 20 seconds to "reset". (and then turn it on)

  2 - take the battery for 30-60 seconds, then put the file in

  3 - switch to recovery mode, create a folder called "Sansa.fmt" and drop it onto the Sansa. It reformats itself when you turn it off. (DO NOT NEVER FORMAT the disc "16 MB format"!)

  4-if those who do not work, sometimes the 'Chip RAM' wiggles loose. Please dissamble it, push it in firmly and try again. Photos and instructions are HERE.