My Satellite A200 - 1 M 8 need all drivers for XP?

I am installing XP on a Satellite A200 - 1 M 8 and ask yourself if this is a must for ALL drivers to install...

To do this, delete: I use this system for a specific application where wireless lan or SD card reader or build in camera will not be used.
My question is: so that the system works correctly, next to respect the correct driver installation order, is it mandatory to have ALL the drivers installed?


In my opinion, you must install only the common drivers like chipset, drivers of graphics cards, LAN, WLan, etc.
These drivers are important and necessary to use the laptop and get the best performance from the system.
But as card SD or Webcam drivers are not needed if you n t intend to use these devices

> I want to keep my system as light as possible and possibly to avoid interference of any buggy drivers
Hmmm. don't think that there will be all the disturbances until you will not use the devices that the driver is missing ;)


Tags: Toshiba

Similar Questions

  • Need all drivers for Win XP for Satellite A50 PSA50A

    I need all drivers for Windows XP for Satellite A50 (PSA50A-07K04Z)
    I found Lan and wireless for this model drivers...


    Try the XP drivers from the European pilot of Toshiba page.
    You have to search the area of the Archive.

    Archive-> Satellite-> Satellite A-> Satellite A50-> PSA50E-> Win XP

    Welcome them

  • Need all drivers for Windows XP for Satellite L40-139

    Need all drivers for Windows XP for Satellite L40-139

    Welcome to the club! It seems that the drivers of Windows XP Home edition are not yet available. Check the Toshiba download page days. Meanwhile try to find drivers Googling autour.

    Chipset - Intel® 943GML + Intel® ICH7-M
    Graphics controller - Intel 943GML
    Card sound - ADI AD1986A
    LAN - Realtek(10/100M)
    WLAN Atheros 11 b/g (13ch) XB63L

    Sorry, but you must be patient if you want to have all the tools of drivers and utilities. Also check the other topics L40. Maybe you will find some useful information.

  • Need all drivers for Win2000 - 1801 Satellite PS181N


    I need all drivers for my laptop Satellite 1801 (PS181N-02NSZ0).

    I don't have any CD or info on my video device... Help!

    Thank you
    model name: 1801system Satellite unit
    model number: PS181N-02TSZ0

    Need: Drivers for Win 2000
    Please, I beg you.

    Post edited by: talgat_m

    Looks like a series of Japanese Satellite
    Hmm maybe European drivers would go too.

    Check the page of the Toshiba Euroepan driver and go to the _ARCHIVE_.
    Then choose Satellite Archive Satellite 18xx Satellite 1800-100.

    Satellite 1800-100 has the same number; * PS181n *.

  • Need all drivers for Win XP on Satellite L40 - 14G.

    I want to change OS Vista on XP Pro OS. Need all drivers L40 - 14G for XP operating system. Thank you very much!

    Sorry, I can not confirm your photo... I was there 2 minutes on the site to download drivers and the link WORKS!

    Click on the link and download the drivers, the link works! Please try with another browser (internet explorer, Firefox)!

  • Satellite A135-s2266: where to download all drivers for XP

    Where to download all drivers for satellite a135-s2266 for Windows XP?

    I recommend looking at the pilot site Toshiba us because this laptop seems to be developed for the American market.

    Check this box:

    If you find any XP drivers, you always need to wait!

  • Satellite s1900-704 - need all drivers for Windows XP


    I need to all drivers and utilities for my Satellite 1900-704. The operating system is Windows XP SP3 and I can't find the drivers on the home page.

    The mouse pad and the mouse wheel no longer work!


    I put t have problems to find drivers and utilities for your laptop. Everything is listed on the Toshiba site: decision-making supported Downloads & => Download drivers

    Don't forget that you must search in * Archives *! You can select this option on the first area known as product type.
    Check it!

  • Satellite L30 (PSL33): need all drivers for Win XP


    Can someone show all links to * drivers * for * Win * XP * TS I need. (Satellite L30 (PSL33))

    Thank you. :)

    Where is the problem?
    Go here:

    and choose mobile-> Satellite-> Satellite L-> Satellite L30 PSL33

  • Need all drivers for Win XP on Satellite L40 - 12 X

    Hello. I have Satellite L40-12 X and I need drivers for xp... .can someone help me pls?

    After installation of all hotifxes XP and patches, you will need to remove the sound card in Device Manager. After restarting again the operating system should find the sound card and you must install the driver of his newest Realtek card.

  • Need all drivers for Win XP on Satellite L40 - 13 s.

    Hello. I have a 'Satellite L40-13s' and I need drivers for windows xp.

    I had 5 missing drivers:
    * Video controller
    * The video controller (VGA compatible)
    * Unknown device
    * Ethernet controller
    * Audio Device

    Can someone help me please?...

    ... Thanks ;)

    As I wrote in another topic, but with the same question: until Toshiba offer all the drivers you need to improvise. ;)

  • Need all drivers for my Satellite L300-14 x


    I hope you will be fine.
    I have a problem:

    I have not ever the drivers for my computer laptop satellite L300-14 x

    I need your help

    Thank you


    What operating system do you use?
    Satellite L300-14 x belongs to the PSLB0E series.

    You can find all the drivers on the European driver Toshiba page.
    Choose your model laptop and you will find drivers for Win Vista, Win 7 and XP!

    While you need more?

  • Satellite Pro A100-02Y (PSAAPE): Need XP drivers for LAN

    Having recently bought a Toshiba Satellite Pro A100-02Y (PSAAPE) it came with Vista which I removed and placed a copy of XP pre-installed.

    I downloaded and installed all the drivers for XP but have Ethernet conflicts and mass storage controller and can't seem to find the drivers to correct this.

    Can anyone help please.

    Thanks in advance


    I Don t know what your problem is, which is not a real-time onboard support where are sitting 10 technicians from toshiba and waiting for
    be asked. We are normal people, where we're helping another.

    So, your comment was helpful, NOT! ;)

    And now about your problem:

    A mass storage controller is usually a RAID controller or something else and the word ether-'net' is self explainable... :)

    Try it here, I found the drivers for my computer to my Vista / XP-performance @ home. : O
    (It s the Canadian toshiba site)

    Hope you have a chance and find something.

    Welcome them

  • Need all drivers for HP Pavilion G1M18EA 17

    Hello, I just bought a new laptop, and I have problems with the search for drivers for it. Laptop came with no cd and a Wi - Fi connection does not work without a driver, just FYI I'm a real beginner in this kind of things.

    Windows 7 64 bit

    HP Pavilion G1M18EA 17

    Best regards.

    Here are the specifications of your laptop HP Pavilion e115sm 17. According to the specification, this model left the factory with FreeDOS installed. HP provides only 8.1 Windows drivers on the page of drivers PC laptop HP Pavilion e115sm 17.

    WARNING *.

    HP cannot provide the drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

    Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

    The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

    You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

    After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

    If you install from a USB key and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '.

    In addition, as the hard drive is probably partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

    I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

    From the top...

    (1) turn on the computer and immediately start typing the key "ESC".

    (2) when the MENU is displayed, press "F10".

    3) navigate the BIOS to the "System Configuration", 'USB 3.0 pré-OS Config' and the value 'Auto '.

    4) navigate the BIOS to the "System Configuration", "Startup Options" and "Secure Boot" the value 'Legacy Support' the value "Enabled" and "Disabled"

    5) press "F10" and click "YES" to "Exit Saving Changes".

    (6) computer should restart and display "Change of operating system startup Mode"... type the four digit code, then press "ENTER".

    (7) let Windows 8 boot-go to top and place the support of Windows 7 SP1 in the drive to DVD or a USB port, then logout / shutdown.

    (8) to turn on the computer and immediately start typing the key "ESC".

    (9) when the MENU is displayed, press the key "F9" and then select the correct boot UEFI source (CD/DVD drive internal, USB drive, CD/DVD, USB Flash drive, etc.). ... Press any key to start the CD/DVD, if prompted.

    (10) select "Language", "time / currency ' and 'Keyboard' settings and then click"Next ".

    11) click on 'install now '... Check "Accept terms" and click "next". Click on "Custom (Advanced)".

    (12) you may need to provide AMD SATA/RAID drivers at the moment... Download the AMD Chipset Drivers (Chipset / AHCI / USB 3.0)

    (13) follow the instructions and answer all questions as required. Enter a valid Windows 7 when key requested.

    (14) Please install the Windows 7 64-bit drivers following;

    AMD Chipset drivers

    Device Manager position "Hardware ID" (text only) for all remaining missing or unknown devices, as shown in the example below.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • 8 to 7 64-bit, I need all drivers for windows 7 64 bit on an HP 2000

    I have a laptop HP 2000 with AMD radeon hd graphicis 1.30 and realtek HD audio. I removed windows 8 is it came with, formatted the hard drive, installed windows 7 pro 64-bit.  I need all the drivers for it. Is not connected to the internet. It say need dirvers for the Ethernet controller and SM bus controller. My model is 2000 TPN-108-2B19WM. CAN SOMEONE HELP ME GET THE CORRECT DRIVERS FOR THIS LAPTOP?  I CANNOT USE OR DO NOT WANT WINDOWS 8 FOR WHAT I SHOULD DO WITH IT. Thank you, Don

    You are the very welcome gift.

    You need this driver for wired ethernet controller.

  • I need all drivers for windows 7 32 bit r007tx Hp15

    Dear team,

    I buy hp 15 r007tx and need all the drivers for it. I installed windows 7 32 bit. Please give me the link.


    For graphics on W7 x 64 you can see if these drivers work.

    Chip set.  First, install and restart.

    Intel, 64-bit graphics card.

    NVIDIA graphics, 64 bit.

    The rest of the drivers on the support page should work.

Maybe you are looking for

  • HP Pavilion 500-559na: upgrade to i5 to i7 processor

    Hi, I recently bought a 500-559na for games desktop computer and want to upgrade the processor and graphics card. Currently, I have an i5 - 4460 and concentrated on processors i7 with 1150 taking online and wonder if they adapt and work? and if possi

  • Activation of license on the Touch Panel TPC-2106 problem

    I activated the license for the Touch Panel Module on our Labview PC, but so far no screw test running on the TPC-2106 himself timeout after 5 minutes IE. It is still in trial mode. I tried the trigger, then the reactivation of the license, uninstall

  • What is the difference between hard links and junctions?

    Hey, if my computer is bogged down and I'm working on speeding up. I have two hard drives, and C: represents 87% of full while D: is very empty. I play PC games so I installed Steam on my computer in my C: drive and its about 45 GB. I want to fly ove

  • Windows 7 no longer work with my Bluetooth Mices

    I have the mouse following BT who used to work with my Lenovo X 200/Win 7 Pro. -Microsoft Bluetooth Notebook Mouse 5000 -Logitech V470 -Kensington PilotMouse Mini Bluetooth Recently, after that I restored the operating system to a previous state, my

  • Change the default value for the field selection at run time

    I would like to know how can I keep persistent information in Sib. My problem is I want to change the default value of the choice field when running so that when the user starts the application again, it can retrieve the new default value.