My Satellite L350 keeps disconnecting and then restart.

Satellite L350 keeps disconnecting and then restart.
The fan is free from dust. I have reinstalled Windows
There is a new battery for 1 year

If the laptop is turned off, the battery can be charged. The laptop runs normally on the battery.
As soon as the power adapter is connected, the computer turns off.
When I use the computer without a battery but with the AC adapter, the computer shuts down. Test with a different AC adapter, the computer turns off.

If the cable between the motherboard and the CC is originally the problem whether it is unlikely?

Someone has an idea to help me with this problem?

> From the moment when the AC adapter is connected, the computer turns off.
There must be some kind of electronic problem of power on the motherboard.
I put t think that the AC adapter is affected since you have already tested another (good job?) Power adapter.
I think in case of malfunction of the motherboard, the laptop fix can be a costly affair
The motherboard is one of the expensive parts for laptop and I think that that's not worth buying a new part for this old model of laptop.

Tags: Toshiba

Similar Questions

  • My Mozzilla Mail keeps freezing and is unresponsive. I need to keep closing and then restarting him. it.

    I am running windows 7 Professional. I have mozilla Mail 38.2.0 and it is open all the time. After several hours Mozilla constantly collect new messages and when I try to refresh or open an existing e-mail, nothing happens. None of the works except close buttons. I have to close and reopen the program by using the close 'X' in the upper right. When he re reopens it works fine and no error message appears.

    Hello

        I think I've found the problem. My laptop is set to sleep after a set time. It's when it awakens that causes the problem. I have set the laptop to never sleep and I have tested it for 4 days and up to now it has worked flawlessly. Fingers crossed.
    

    Thanks to all who tried to help.
    Concerning
    Millsyx

  • blue screen - PC keeps freezing upwards and then restarting

    Signature of the problem

    Files helping to describe the problem (some files may be is no longer available)

    Mini091810 - 02.dmp

    SysData. XML

    Version.txt

    Additional information about the problem

    BCCode: 1a

    BCP1: 0000000000005000

    I keep having this problem that my pc keeps freezing and then restart and makes me nuts blue screen appears dumping things then memory dump appears I can't crun my repair for any hope of reason that can help guys

    BCP2: FFFFF70001080010

    BCP3: 0000000001080498

    BCP4: 0000000000014C 48

    OS version: 6_0_6002

    Service Pack: 2_0

    Product: 768_1

    Problem event name: BlueScreen

    The system version: 6.0.6002.2.2.0.768.3

    Locale ID: 2057

    Hello

    To see how to use BlueScreenView and MyEventViewer to troubleshoot the Bluescreens see the
    Methods indicate in this thread - top 3 answers.

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    -------------------------------------------------------------

    Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
    in fact, remove and replace - don't do not just tight. Make sure that the vents are clear and that the
    the fans are working. Even if the temperature is OK assume no heat does not affect the video,.
    sound or other system functions that it these get hot. Try adding a small fan blowing in
    the vents as a test. (These are especially for a PC not a laptop.)

    Have you recently added any hardware? Have you updated any drivers just before this started?
    (Check control panel - updates of Windows to see if all drivers have been updated it on the)
    This started the time) likely guilty hand are video driver, other great drivers, memory, and
    antivirus/antispyware/security products could be at fault as well as reader questions.

    Use the troubleshooter below and refer to the following message to drivers and memory when
    you get these sections and then back to the resolution of the problems according to the needs.

    BCCode: 1a 0x0000001a<-- read="">
    http://www.faultwire.com/solutions-fatal_error/memory-management-0x0000001A-* 1041.html? order = votes

    -------------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during ' blue screen of the.
    death ' crashes and displays information about all accidents of a table.
    Free

    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
    However, there are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Does not work
    tell all possible driver issues).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Why do I often keep my modem closing and then restarting in order to stay in touch?

    It is a modem from Verizon and about 3 years.  I'll be in the middle to send him something, or by browsing a site, and all of a sudden the lights start blinking furiously.  I have to then turn off, wait and start again then compose a message.

    Thanks for all the help, and I don't know there will be MORE questions, because I'm not as savvy PC, but try to learn ;-).

    Bobbie

    You must determine if the modem is in fault, or something else.

    Next time the problem occurs, instead of power cycling your modem, stop and turn off your PC. Then restart your PC. See if the problem has disappeared or that it still remains.

    If the problem persists after restarting your PC, then the problem is probably in the modem. Call Verizon and INSIST that they replace it.

    If the problem goes away after you restart your PC, then the problem is likely to be caused by a problem (hardware/software) in your PC. Check / replace the cable between the modem and the PC (or between the modem and your router).

    Try closing your browser, and then restarting your browser... the problem goes away.

    If you have (or can borrow) a second PC, unplug your PC and connect the second PC to the modem and see if the problem persists.

    If the modem is connected to a router (and your PC is attached to the router), then cycle power to the router to see if the problem goes away. If it's a very old router, consider replacing it.

    If your PC is wireless, try to fix your PC with an ethernet cable (and disable your wireless network card and allowing your ethernet adapter) to see if the problem goes away.

    Good luck!

    EDIT: You can also use your antivirus software to perform a full scan of your hard drive (just to rule out the possibility of the problem caused by a virus trying to 'phone home').

  • Error "Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. "When you try to install Windows.

    How can I configure my windows 7 after restoring my laptop to the factory conditians?

    My laptop had a blue screen and I couldn't get rid of it, I went into safe mode and restore my computer to factory conditions. When the computer says "the installation program starts services" you stop and I couldn't turn it back on for 15 minutes. When I turned on and tried to contained my setup, a message keeps poping up "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. "But no mader, how many times I reboot my laptop, the same message appears. What should I do? I've restored my computer several times and never had this problem.

    You should try another recovery.

    New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

    If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

  • Internet keeps disconnect and reconnect every 3 minutes

    Original title: network programs network networking Internet Web site Site Web Web Site URL

    Internet keeps disconnect and reconnect every 3 minutes approximately. I changed the computer so its near the door (the router is in the room) but I never had this problem with my laptop.

    Hello

    1. which version of the Windows operating system is installed on the computer?

    2 did you a recent software or changes to the material on the computer?

    You can go through the steps mentioned in the link and the Coachman.

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  • I can't access my Windows Live Hotmail account more because of a message that tells me to disconnect, and then click my web account to outlook.

    I can't access my hotmail account more because of a message that tells me to disconnect, and then click my account from Outlook web; which then brings back me to ordinary sign in because I have no direct application on the web.

    original title: can connect is more.

    You have posted the answers Feedback Forum. I'll pass this to the Windows forum space.

    I'm not clear on exactly what your problem may be, but I suspect you have find better assistance in the Windows Live forums (which are part of a different forum platform).

    Help and Support for Windows Live Hotmail can be found at http://windowslivehelp.com/product.aspx?productid=1

    -steve

  • the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I am disconnected and then reconnected___

    the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I disconnected and then reconnected.

    I just ran windows update on a large number of files all successful before this happened, it happens when I am connected to the internet, I use dial-up access

    added on 25/11/09 still have the problem mentioned above, even explore two windows are runnibg on the system, or two IE browsers running?

    Added 27/11/09 I ave followed all instructions up to and including thefix tool kb/93623, stiil I have this report of windows Defender quickly appearing twice in a row, then I'm disconnected from the internet. any more ideas thanks sam

    Visit this link:
    http://support.Microsoft.com/kb/936213

  • I've updated my explore since the MSN site and then restarted it said I was running a version of Windows.

    I've updated my explore since the MSN site and then restarted it said I was running a version of Windows. I then re installed Vista with my drive of origin as suggested and created that created an old file from windows to save older files and now it will not recognize the key of the product code.

    original title: reinstalling vista

    From you description of the problem you encounter, the scenario where this can happen.

    Windows vista was preinstalled by an OEM or by using a Volume license installation. The problem does not occur on retail versions of Windows Vista. For example, the problem will not occur if you bought Windows Vista and installed the operating system on a computer yourself. If this is the case with your system

    Solve this problem by referring to the article below.

    http://support.Microsoft.com/kb/935791

    To activate windows vista manually, you can follow the steps described in the links below.

    http://support.Microsoft.com/kb/940315

    I hope this helps.

  • updated Windows, it does not update these files each time that I update and then restart my PC, she just asked me to update their new please help

    MSXML 4.0 SP @ a security update (KB927978)

    A security update for Microsoft XML Core Services 4.0 Service Pack 2 (KB954430)
    Update for XML Core Services 4.0 Service Pack 2 (KB973688) Micrisift
    He will not update these files each time that I update and then restart my PC, she just asked me to update again please help

    Hello

    · What status appear in the historical versions?

    a. Click Start, in the search box, type in update

    b. click on windows Update

    c. click view update history

    Follow the steps from the link that has steps on how to troubleshoot Windows Update or Microsoft Update when you are repeatedly offered an update: http://support.microsoft.com/kb/910339

  • Windows vista installation interrupted, click OK to restart the computer, and then restart the installation

    I was doing a reformat of the factory for windows vista on the laptop of my son (packard bell EasyNote LJ 65) when the battery is dead and the computer turned off. When I started it back up it gives the message: the computer restarted unexpectedly or encountered an unexpected error. Windows Setup cannot continue. To install Windows, click OK to restart the computer, and then restart the installation.
    Everything I try, I get no further than this message, I don't know where to go to continue the installation. The computer does not see that the installation was not completed. I tried to enter the menu with F9 where I had to do the reformatting of the factory of windows but it will not give me the option to continue installation, it shows just the vista Windows, but when I click brings back me to the error message
    Help, please!

    http://support.PackardBell.com/UK/

    For questions about the recovery process, contact the manufacturer of the computer.

    This isn't their recovery process, Microsoft.

    See you soon. Mick Murphy - Microsoft partner

  • Windows 8 refreshment stops at 77% and then restarts and displays an error

    I can't update my Windows 8 Pro because when I do, it stops at 77% and then restarts and displays an error (there was a problem during the update of your PC)

    Hey Sajjad,

    I understand that you cannot update your computer Windows 8.

    1. did you of recent changes to the computer?
    2. Why are you trying to refresh Windows 8?
    I suggest you follow the steps mentioned below and check if it helps.

    Method 1:

    I suggest to disable all external devices except the mouse and keyboard and try to refresh.

    Method 2:

    Use the check disk command for all errors on the hard drive.

    Warning: We recommend not to interrupt the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. Security, you can back up your data before using check disk drive.

    Use the drive control as follows:
    a. press the Windows key + X, and then choose command prompt (Admin) on the shortcut menu.
    (b) in the search box type 'cmd' and ENTER. Right click and select "Run as Administrator".
    c. type at the prompt in the command CHKDSK/p and press ENTER to scan the drive.
    d. type CHKDSK C: /F /R and press ENTER to repair corrupt sectors, if there are.

    NOTE: The root drive must be C: and drive can schedule a task to start the system, if this is the case, press on is to schedule a task, and then restart the computer to run chkdsk.
    When chkdsk is finished, boot up to the desktop, and then check.

    Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

    You can follow the links below for more information.

    How to restore, refresh or reset your PC:


    http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

    How to create the installation media for a PC refresh or reset:


    http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

    Refresh and reset your PC:


    http://blogs.msdn.com/b/B8/archive/2012/01/04/refresh-and-reset-your-PC.aspx

    Warning for update: the applications that came with your PC or you installed on Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. You will find a list of applications on your desktop after you refresh your PC.

    Warning for the Reset: all your personal files will be deleted and your settings will be reset. All the apps that the is come with your PC will be reinstalled, but all other applications will be deleted.

    Hope the above information helps.

    Let us know if you have other questions about Windows in the future. We will be happy to help you.

  • This is the message I get this morning cannot launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure that you have the appropriate permissions and then restart Adobe InDesign.

    need help this is the message that I have this morning cannot launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure that you have the appropriate permissions and then restart Adobe InDesign.

    Hi amyturnkey,

    What operating system do you use? (Windows / Mac?) What version number?)

    This thread pourrait be useful: error starting InDesign CC: '... ". lack of sufficient permissions to access the folders preferences'

    Kind regards
    Maurice

  • error: could not launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure that you have the appropriate permissions and then restart Adobe InDesign.

    A new installation of indesign CC 2014 - I got this error message:

    Cannot launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure that you have the appropriate permissions and then restart Adobe InDesign.


    I tried to uninstall the application and reinstall it, still get the error


    I tried to install a previous version - indesign 9; also get the error


    I tried logging out CC and return, still does not work


    I tried restart my desktop computer, still does not work.


    went to the disk utility to verify and repair permissions. repaired all of an existing, still does not work


    Apparently, a permissions problem, I don't know what to do to fix this

    See does not start under new inDesign CC | Adobe Community

  • MP3 plays for a few seconds and then restarts

    I created an MP3 player that works perfectly fine on my local machine but online plays the song for a few seconds and then restarts the song. He then played completely. The next songs also have the same behavior.

    Someone at - he meets away the problem before? Do you know a solution?

    Thank you in advanced for your help.

    I found a way to preload the mp3 before you play. Thank you for the help kglad.

Maybe you are looking for