My Satellite P100 will not read the SD/Media card after reinstalling XP - SP3

I have a P100 and the model number is PSPA0U-1W0012 (this is what is printed at the bottom, it is a measure).

I just installed Windows XP with Service Pack 3 on it because it was full of junk. I used the original recovery CD to install the drivers and installed the SD card reader driver, but it does not yet recognize the cards I used generally (xD and SD). To install XP, I used one CD other than the one supplied with the computer (I didn't want to not all of these free software that come with the recovery CD)

I tried to look on the Toshiba online support, but I have found no information on the issue.

Please advice, thank you.

Hello

First of all, you must make sure that your card reader driver has been properly installed and that the card reader works without problem and it appears in Device Manager.
Second, you must make sure that the inserted cards are compatible and supported.
I think that the details could be found in the user manual.

By the way; I advise to always use the recovery disk because the operating system and drivers are always configured and everything should work fine.
If you don't need some installed applications then you could easily remove it from the system. You can also use a free tool like CCLeaer to clean the registry after that some programs have been uninstalled.

Tags: Toshiba

Similar Questions

  • Satellite P200D - will not read the Memory Stick Pro duo adapter

    Kia Ora
    My Satellite P200 will not read my Memory Stick Pro Duo adapter, both brand Sony.

    I am running Vista Home Premium. SD cards are read OK.
    The adapter works fine in my PC running XP Home premium. I tried two cards different pro duo. Help, please!

    Hello

    I think you should consult your user manual because this type of card is not supported:
    + Memory Stick Duo/PRO Duo and Memory Stick adapter are not compatible with the multiple digital media card slot. Do not insert the Memory Stick Duo/PRO Duo into the slot. Data lost or damaged if you use one card other than those supported. +

    Do you have more questions? ;)

  • Windows will not read the disc media

    For some reason, windows will not read dvd or cd or the floppy one and the flash drives or cards of the camera with a usb drive. What would cause this and how then I get back to work? All media works on the other pc.

    Always connect these devices to drive/USB card edge USB connection (for desktop Front panel USB ports); never use a connector of the control panel back or USB hubs.

    Read the page and manually or just download & run fixit MS; It just automatically all the steps

    http://support.Microsoft.com/kb/817900

    With regard to the FDD. I'll say change the player as FDD get very often defective & now a days it is difficult to get a new one. For the majority of them are now short lived to over-exploitation.

    Remember to answer.

    S.Chatterjee

  • My Advent KN1 series laptop will not read the SanDisk micro card on my mobile

    ADVENT 6001

    Hello Yamaha03,

    Thank you for your message.  This happens with all the cards that you are trying to read from where is it just this one?  We need the problems if the port/player card on your computer could be the problem.  If your computer has a built-in card reader, go to your computer manufacturer's website and download/install the latest driver for your card reader.  Please let us know if this or help to solve this problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Satellite A40-231: SD-R6112 will not read the DVDs I burned

    I finally got my DVD burner to work, but now the drive will not read the DVDs I burned, which, of course, defies the point of having a dvd burner in the first place... When I insert my dvd recently burned, "working" light lights and stays on. Same thing happens no matter how many times I take it out and put plug back in, restart my computer, etc... any ideas anyone?

    Hello

    @Magnus:
    Sometimes, CDs and burned DVD cannot be read with no closing sessions of engraving. You should check this option.
    In addition, this burning program did you use?
    I use Nero. Form is the program better combustion and I never had a problem.
    What you need to do is to test several DVDs. not all media work on the disc.

  • USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

    USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

    It's a new 12 '' MacBook

  • Satellite A100 - will not charge the battery

    Hello

    I have ned to help. My Satellite A100 will not charge the battery. He works the power adaptor for the led indicates charging status, battery shows 1% of loading tatus information, but none does change - no loading any time. When disconnected everything just stops off like normal desktop.

    I've already put battery in and out, made upgrades to the antivir software, makes Toshiba controls, tests, but what ever he did did not any change. If there is no way for restoration of battery how to check what the problem is I have no second battery or AC I can always buy new batttery but I don't know if the old one is broken and weather new would work properly?

    Best regards
    pawelg

    Hi pawelg,

    I agree with the user above. The battery can be charged only up to 500 times, and after that, it must be replaced. I think it's the case now, I mean that everything works correctly on the AC adapter so I think that the battery must be the reason for this.

    By the way: you can buy a new battery to an authorized service provider. ;)

  • Carpet * a DVD-RAM UJ-820 s will not read the cd rom cd-rom dvd

    OK, I read the other posts on these discs. Mine will play DVD movies and play them. It will not read the dvd ROM CD CD-ROM etc.
    This cannot be a hardware problem, it must be the software should not it?
    Can anyone help?
    Does anyone have information on how to remove these disks of the computer? Im sure I can install a new one myself if I really need to.
    Unfortunately the computer is just out of warranty

    Hi Robert,.

    Unfortunately, your problem sounds like a problem with the hardware with the optical drive. The player itself must be able to refocus its lenses to switch between DVD and CD formats, and also to pass the pressed DVD and DVD burned.

    I suggest you tyre remove the device from the Device Manager Control Panel, then restart your laptop so that the optical drive will be recognized as a new component hardware and Windows will then be re - install with standard drivers etc. If this does not work then it looks like a new drive will be necessary.

    Unfortunately you say not what model of laptop you have (the removal procedure is not the same in all cases), but in general if the car is equipped with in-house it is held in place with one or two screws accessible from the bottom of the laptop that should be removed first, then the optical drive can be slid out of its location.

    Kind regards

  • I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

    Original title: no dvd

    I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

    Hi Lesliestones,

    ·         Did you do any change on the computer before the show?

    Follow the suggestions below for a possible solution:

    Method 1: I suggest refer you to the article in the Microsoft Knowledge Base and check if it helps.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/982116

    Method 2: You can run the fixit and check if it works.

    Your CD or DVD drive cannot read or write media

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    I hope this helps.

  • I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or the usb ports

    Help with my computer of dumping

    I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?

    If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.

  • E T5226 machine will not read the SD,.

    E T5226 machine will not read the SD card, is there a driver for this problem? If I use a USB drive, the computer will read the card but when the SD reader support it don't read nor even appear in my computer screen.

    Using Microsoft windows 7 Ultimate

    Hi Larry,

    Thanks for posting your query in the Microsoft community!

    I understand that this E T5226 machine won't read SD card. I will try to help you with this.

    (1) did you make any changes before the show?

    (2) you receive an error message/code?

    1. check if the device is detected in Device Manager. Follow the steps to go to the Device Manager

    i. click on start, type devmgmt.msc and then on enter.

    II. research the name of the device

    If the device is not detected in Device Manager, and check if it is the hidden device.

    i. click on view under view hidden devices

    II. develop all winks in Device Manager

    III. there would be multiple entries in the device in gray Manager uninstall all entries shaded under all the winks and then restart the computer and connect the external device to the computer and check if it works.

    2. install the latest drivers from the manufacturer's Web site and even ensure that the driver is compatible with the version of the operating system installed on your computer. check if it works.

    Downloads & Documents - Support Desk / series T / T5226

    http://support.gateway.com/us/en/EMAC/product/default.aspx?modelId=1626

    Link: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

    Installing the driver in compatibility mode:

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    3. check with any other card SD one another if it is get recognized or detected or you can even check if the same SD card becomes recognized or detected on the other computer.

    Please post back if you have any questions about Windows. I will be happy to provide you with the additional options that you can use to get the problem resolved.

  • I am trying to download Adobe Acrobat 8 Professional, because the disk drive on my computer will not read the disc. I can't link to this download.

    I am trying to download Adobe Acrobat 8 Professional on my PC, because the disk drive on my computer will not read the disc. How can I associate with this download?

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • LR4.0 will not read the traces for iPhone App "Traces GPS"

    Hello

    I tried to understand, looking at this forum and another search on Google, why LR4 import tracklogs from the iPhone App GPS tracks.

    As far as I can tell, the tracklog information and format corect seems to me. Here is a sample of the app:

    <? XML version = "1.0" encoding = "UTF-8"? >

    < gpx version = "1.0".

    Creator = "traces GPS - " http://highorderbit.com "

    " xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "

    " xmlns =" http://www.topografix.com/GPX/1/0 "

    " xsi: schemaLocation =" http://www.topografix.com/GPX/1/0 http://www.topografix.com/GPX/1/0/gpx.xsd' > .

    < time > 2012-03-18T 23: 20:59Z < / time >

    < trk >

    < name > Track Log 2 < / name >

    < number > 1 < / number >

    < trkseg >

    < trkpt lat = '+ 48.473296' lon = "-68.429246" >

    < model > + 65.511414 < / ele >

    < time > 2012-03-18T 23: 20:13Z < / time >

    < / trkpt >

    < trkpt lat = '+ 48.473379' lon = "-68.429238" >

    < model > + 63.738411 < / ele >

    < time > 2012-03-18T 23: 20:15Z < / time >

    < / trkpt >

    < / trkseg >

    < / trk >

    < / gpx >

    Any idea?

    Thank you

    Steve,

    The problem with the tracklog is the '+' in the specifications of the latitude. Remove the brands '+' the legible tracklog. Now, I'm not sure if a '+' is valid or not (http://developer.garmin.com/schemas/gpx/1.0/oxygen/index.html_h882410155.html), but for this time Jeffrey Geoencoding Plugin will not read the tracklog...

    Beat

  • Satellite 2410-303 will not read the product recovery CD

    My satellite 2410-303 will not read my product recovery CD.
    When I turned off my pc with the drive in, I get messages saying that the disk is not formatted correctly.

    Hello

    It of weird, is your CD the other disc drive? Have you tried to read your cd of restoration with another computer? If the same error occurs on another computer system, then the cd is probably defective.

    Just a question: I guess you want to recover your machine, Don t you?

    See you soon

  • My E drive will not read the DVD-RW/DVD-ROM

    So here is the problem
    I have a vista Home premium 32-bit with sp1 computer laptop
    who will not read DVDs or games that are in DVD-ROM format (specifically, the game command andConquer 3: Tiberium Wars)
    but it will read the games more alumni who are PC - CD (such as Command and Conquer: Generals) well it will nt installs successfully

    I tried to clean my computer and reinstall using operaing system came with my laptop drive, but the drive E may not even read that
    the CD turns, stops, turns, makes a strong ' loading ', but stops then
    nothing happenes
    I restart my PC with the CD in there because he says I'm supposed to o, but nothing happens, my restartes just PC normally

    Help, please

    Hello, tyINtrouble

    The device is listed as a DVD player?

    You can check by clicking on start, click computer, and to check the label of the hard drive, he may mention DVD or DVD - RW etc.

    You can also check your connections are secure.

    If possible, you can try to test the drive in another machine, or another drive in your computer to see if it works properly.

    If your hard drive and DVD/CD player are on the same parallel cable connection, it can cause problems as well.

    We can't wait to hear back on your part.

    David
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for