My Satellite phone stops during the restore recovery disc image

Similar Questions

• Satellite L - cannot create the Vista recovery disc

  Hello. I am trying to create the recovery disk. Takes 2 DVD, no problem with the 2, but when I am burning nr.1 and is about to finish showing me the error message:

  The following question has occurred during the recording of the data on the disk.
  The current process will be stopped.
  A power calibration area error.
  Please check if the disc is scratched dirty.
  If so, please try again with a new disc.
  (error code: 0E01B5-26-00037304)

  I tried 3 or 4 times, brand new DVD each time. Any ideas?

  Hi zombi71,

  What brand of DVD that you've already used? These burning questions can be linked to the mediums of poor quality so it s recommended using mediums high quality only. I have pretty good experience with Verbatim and TDK discs and especially with the DVD-R DVD + R. So I would recommend Verbatim DVD-R. With this brand, it was possible to create the mediums of recovery on my laptop. :)

  Check this box!

• Satellite L450D - cannot use the product recovery disc

  Hello

  I'm new to this forum and have spent 3 days reading this and other forums to try to solve my problem, I found a lot of answers, but none does not work for me so I'd see if I could get the thought some very great need help here.

  Now, I have the problem that when I start the laptop the windows logo appears, then Microsoft corporation through the bottom and then the screen black with the cursor of Pentecost, I tried all possible starting in the bios settings and just goes back to this screen, I can t get no prompt or anything like that , I used knoppix and managed to transfer all the files I need from my external HARD drive, so thought I would not reset to factory settings with the recovery disk of the product supplied with the notebook, the disc never has been used or taken from the package until now is so in perfect condition of the art, so I put in the drive , start computer press f12 and make the primary boot CD, but all that happens is it says windows is loading files and get back to the dreaded black screen and a cursor.

  Can someone please help?

  If you have the original Toshiba Recovery disk I assume you have older model laptop with Windows XP Home edition old. To be honest, it would be interesting to know is you.

  In any case, out of curiosity but can only begin preinstalled OS in safe mode?
  Enter the BIOS settings and set its default value initially. After ding this change BIOS boot order and place the CD/DVD as first boot device. Put recovery media in the optical disc drive, and boot up your laptop. While the laptop tries to start C press several times.

  Usually, this should force your laptop to use ODD as the first boot device.
  Long ago, I had similar problem and such combination helped to force the ODD to read the recovery disk and Windows XP Home edition recovery facility. Of course, I hope that everything is OK with your HARD drive.

  Please test and send feedback.

• Satellite A300 - 20 p - the restoration of the Toshiba Recovery?

  Hello..

  my friend has this laptop: Satellite A300 - 20 p.

  I'm not sure what he was doing, but he installed Windows Vista Home Premium 64-bit, 32-bit and then again. All messed up.
  Anyway, it did not a recovery disk for his laptop (garbage). Now, because I have a Toshiba laptop too I know that there is recovery on the hard disk on partition D (not the windows partition). I tried using "Windows repair" Windows startup, when I try to restore the PC everything from backup media it says 'couldn't find any backup media', now I'm not sure if the recovery of the area still available or not, because Windows cannot start. So far find the recovery media is it?

  If this mission impossible, so I have Windows Vista Ultimate Edition to install and I can download the drivers from the site? The problem is how do I do a recovery media during the installation of the Windows and the drivers?

  Please it's urgent.

  Thanks in advance!

  Hello

  Firstly the Toshiba recovery disc creator can t be downloaded. It s only preinstalled on your laptop and so in your case, you can t more use it.

  Regarding the drivers, install all that you can find on the Toshiba site! Install the drivers step by step!
  I prefer this order of installation of the drivers:
  -Chipset
  -Display driver
  -Sound card drivers
  Drivers LAN-
  -WLAN drivers
  Drivers - Touchpad
  -…….

  Good luck!

• Satellite Pro A10 stops during the installation of Windows

  I have a satellite Pro A10, which stops during the installation of Windows. The installation gets to the part where I need to select the HARD drive to install, then the system off just. I can restart it immediately, and the sdame happens.

  If I enter the BIOS, everything is detected OK, and I've updated to the latest version (V1.4). Also when in the BIOS, the system will remain under tension for ever and a day! and no downtime. I have a couple of diagnostic CD, then run the tests is the same thing, but I ran the seagate diagnostic tool and the HDD OK passes, as does the main map, but cannot perform detailed testing that the system shuts down during the tests.

  I suspect an overheating issue but would like advice.

  Hmmm it s very strange. I thought that the HARD drive could malfunctions but it of very impossible if the HARD drive has passed the Seagate diagnostic test.

  However, it would be very interesting to know if the installation of the OS would end with another HARD drive.
  You know, it of always difficult to provide an exact solution without any diagnostic tests.

  For me, it really looks like a hardware malfunction. So perhaps it would be advisable to contact the authorized Toshiba maintainer for a control of the laptop.
  Guys could run tests and would situate the fault quickly.

• Satellite L300 - fails during the installation of recovery

  Today I took delivery of a recovery disk bright, shiny, new, directly at Toshiba. I was under the impreession it would erase all HDD and recreate a factory install with the recovery of HARD drive partition (which is what I want), but it fails every time in the same place with the following error message:

  [WARNING] W\:Sources\Boot.wim [unzip the file: (seq. 90)-> file corrupted block at offset D 024 8020]

  Any ideas how to solve this problem, or I've been waiting for 2 weeks for a failed CD?

  TA, Fred

  Hello

  I also have Satellite L300, but never had a problem with the Toshiba restore disk.

  What happens if you install Windows using a disc of Microsoft? It works or you get an error message too? If so, it could be a hardware problem, HDD, RAM, or something else.

  Also I've read here in the forum that it sometimes useful to format the whole HARD drive before using the Toshiba recovery disc.
  Check it!

• Satellite A210 - 4 1: Winload.exe problem after having used the product recovery disc

  Hello

  I could really do with some help here. I have a PC laptop Toshiba Satellite A210 - 1 4. Disk partitioned with Vista home premium service pack 4.0.

  Last night, I used the product recovery disc supllied with the laptop in an attempt to restore its initial configuration.

  and the end of the procedure, I find myself with a prompt cmd with X:\windows\system32\cmd.exe in the high bit blue box indicating:

  Error: imageX could not apply vista F:\05993xsp.swm Index 2 of ODD to C:\!

  Press a key to continue. Box disappears then an administrator: X:\windows\system32\cmd.exe in the top blue bit indicating:

  waiting for ODD vacancies...
  STRANGE drive f: loan.
  Look for support in the F: drive...
  Failed to initialize the raid class.
  No RAID - continue normally...

  X:\Windows\System32 >

  Now every time the laptop trying to restart it just comes up with the error message:

  CANNOT START WINDOWS. A RECENT HARDWARE CHANGE OR SOFTWARE MAY BE THE
  CAUSE
  FILE: \WINDOWS\SYSTEM32\WINLOAD. EXE
  STATUS: 0XC000000E
  INFO: THE SELECTED ENTRY COULD NOT BE LOADED BECAUSE THE APPLICATION
  IS MISSING OR DAMAGED

  Below I have then have the possibility of esc or continue with the same result of the system attempts to restart.

  The recovery disc has no option of repair on this subject.

  need help please, I have no idea.

  Thank you

  Hello

  Looks like something was wrong during the recovery procedure.
  Have you tried to recover the laptop once more?
  If this isn't the case, you should definitely try this!

  You are right; hasn t drive recovery option for the repair because the recovery disk is not the same as a MS Vista drive. The recovery disk contains image files (it s a package) and the files contains Vista, Toshiba drivers, tools and additional software.

  So if something was happening well wrung out during the recovery procedure, you will not be able to repair the installation of the OS, but you need to run it again.

• An order has been cancelled or stopped during the processing of multiple files

  I use Photoshop elements 13. I'll save the files from my camera on my desk. Upload photos, edit them, and then while trying to save the changes, I get an error message: "an order has been cancelled or stopped during the processing of multiple files. Continue with the next file or stop? "How I lost my job. a large part

  I was not able to find much about this error online then consulted for relief in this case.
  
  

  Thank you in advance!

  Partial solution.

  The problem occurs when the application is in the State 'restore down' (the middle between ____ and the X button). If I have the maximized application files do not delete.

  Just an info.

• During the restore system to a previous restore point, I got this error 'access denied 0x80070005.

  original title: 'access denied 0x80070005.

  During the restore system to a previous restore point, I got this error "Access denied 0x80070005" Any Solutions?

  During the restore system to a previous restore point, I got this error "Access denied 0x80070005" Any Solutions?

  Possibilities:

  1. you are not the administrator. You don't have to enter the admin password valid when he asked for it.

  2. you probably have the problem with the infection by the virus.

  If you ARE the admin, suggestions:

  a. run a full scan.

  b. If the machine is clean, do your Safe Mode system restore.

  How to go in safe mode?

  Restart > immediately and repeatedly tapping the F8 key until you see a black and white scree > top? Touch down arrow, and then select Safe Mode > Enter > now that you are using safe mode. Make your system restore.

• Inject third-party drivers during the restoration

  During the restoration, is there a way to inject third-party drivers like Nvidia video card drivers?

  Hello

  Take a look at this post with all the information required by you. "' en.community.dell.com/.../19637349 '
  

• I get error code 0 x 80070005 that reads "system restore failed during the restoration of the registry since the restore point.

  Original title: Windows 7 system restore always fail.

  I get error code 0 x 80070005 that reads "system restore failed during the restoration of the registry since the restore point.  I don't have Norton AntiVirus.

  If anyone can help solve me this problem I would be very grateful.

  Thank you for your response.  I forgot to mention in my first post, I tried both methods without success.  However, I finally understand how to solve the problem that led me to want to do a restore of the system in the first place. for now, I am therefore able to avoid a system restore.

  Thanks again.

• Satellite Pro A200 - where to get the new recovery disc?

  On Thursday of last week ended with the blue page of death, tried to use the product recovery disc and found to my horror, it has a large crack in it.
  Can someone tell me is that I can download a new disc of?

  Have managed to cost to get the laptop to the top and running but Windows vista had to install windows 7 Originaly the laptop came with windows XP. Any advice greatly appreciated.

  You can get [Recovery disk | https://backupmedia.toshiba.eu/landing.aspx] Toshiba

• Satellite L40 crashes when you use the product recovery disc

  When you use the product recovery disc to repair my laptop it hang after language page display.

  Select meaning when it displays the language, I select language and press next, no action more far there... I can move one pointer.

  Some may help how to solve the problem.
  Thank you

  > Select sense when it displays the language, I select language and press next, no action more far there

  Perhaps, your recovery disk is corrupt. What happens if you try with Windows disk copy?

• Pavilion 20-b313w: HP Pavilion 20-b313w reset and reinstall with the full recovery disc

  I tried to remove malware from my system so long, so I decided to do a complete reset. Before I have it I order the recovery for my computer disk to reinstall but unfortunately reinstall option disc never came. The recovery partition has been used to reinstall so my computer. I think my computer is still infected because it is in the partition. And because after the reset there are 3 programs in the control panel to uninstall the list of programs that have been updated without an internet connection because I unplugged my computer to the modem during the reset process everything and I am 100% sure that I have not reconnect before seeing these programs. Also, list of updates installed on the Control Panel showed that the 3 programs had updates installed. As these data are still on my system please tell me it is possible for me to do a true thorough reset that removes hard disk and recovery partition then and I can reinstall everything with the HP recovery discs. And please also give advice on the update after. Should I do Windows updates first or updates of HP first. And when it comes to updating the BIOS there are 3 available updates. Can I download and install all 3 starting from the oldest to newest or just the new version? Then when my Windows 8 is fully updated with the HP and Windows tips on how to reinstall Windows 8.1 (free update of Windows Store, no disc) and update? I know I'm asking a lot, but I want to just make sure I do this right so I can enjoy my computer again and if there is a problem, I'll have some kind of reference to look to see where I was wrong. Thanks to all who read this and I am particularly grateful to those who take the time to share their knowledge with me in response.

  Thank you for the additional information.

  Your best option is to use the recovery media that you should have made when you purchased the computer.  If you do not do this, the only other option you have is to buy the media at HP.  The recovery media will restore your computer to its original configuration and reinstall the recovery partition.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Reinstallation of the product recovery disc DLL file

  I recently reformatted my hard drive and reloaded Windows XP Home Pro on my M100 Satellite (PSMA0A) from the product recovery disc.

  Everything is OK except that I get an error 'Unauthorized repositioning of system DLL' whenever I start the computer?

  The exact error message reads;

  RTHDCPL. EXE, DLL unauthorized system

  "The user32.dll system DLL has been moved in memory. The application will not work correctly. The move took place because the dll C:/WINDOWS/system32/HHCTRL. OCX occupied an address box reserved for windows system DLLS. The vendor supplying the DLL should be contacted for a new DLL.

  I contacted Toshiba who suggested I need to set up a new user account and then delete the original user account, and this should solve the problem.

  .... I did as suggested, although this has not solved the problem...

  Any suggestion please

  It will be nice if you can post the link.