My Satellite Pro A300 series number is not found and can not get the upgrade to Windows 7

When I get my Satellite Pro serial number, it is said that it is not in the database and I can't go any following get Windows 7.

Can anyone help?

Hello

What model of laptop do you have exactly?

Which from Toshiba Web site did you use to upgrade to Windows 7?

Are you sure of your laptop is supported and upgraded Windows 7 ready?

Tags: Toshiba

Similar Questions

  • Satellite Pro L300 - 12 H did not get the IP address of the DHCP router via cable

    My Vista Premium SP1 laptop is connected via a wireless connection to a modem/router ADSL Buffalo WBMR-G54 model that works very well. However, I tried the other day to connect the NIC via a RJ45 cable to the router and it won't work! I get the message "limited connectivity" and an IP of 169.254.xxx.xxx that suggests he does not get an IP address from the router.

    I was on various websites and tried all sorts of things as uncheck ipv6 on the properties of LAN card, put off the power of the DHCP Broadcast flag in the registry (according to the number of micrsoft) etc but nothing works.

    Anyone have any suggestions to make it work?
    NB: I took the laptop in work and plugged into the Windows 2003 Server network and got a DHCP IP immediately!

    You asked for help by your Internet provider?

  • Satellite Pro A300-1PW - BIOS flash not successfully

    Hello

    I've updated the BIOS most recent on the Web from Toshiba site and my laptop froze now give a bad BIOS flash.
    All I get now is a white screen and the hard drive light flashes is anyway out of a bad flash

    I have a Toshiba Satellite Pro A300-1PW system
    Model number psag9e

    Thank you
    ADE

    I'm afraid there is not much you can do about it. The BIOS chip is ruined.
    Contact the nearest Toshiba service as soon as possible. They can help you with this.

  • Re: Satellite Pro A300 - DVD drawer will not open most of the time

    I have a portable Satellite Pro A300-1NH. The DVD drawer opens not most of the time. Sometimes it does, but most of the time it isn't.
    Sometimes, if I can get a DVD/CD in the drawer for something to burn, burning works.
    Most of the time the computer does not recognize that there is a disc, and then I can't open the drawer again to get it out.

    Can anyone tell a novice what should I do to resolve this issue please?

    It looks like a mechanical problem. You need to replace or insert a PIN or no folded into a small hole on the plateau near the exit button whenever he is stuck.

  • Satellite Pro A300-15 t does not restart on the current after BIOS update

    Hello

    There is something wrong with my Satellite Pro A300-15 t. I made an update of the BIOS of toshiba recently with the latest Web site and it installed successfully. But after the installation, I noticed that my laptop does not restart when it is connected to the power adapter. It restarts and works perfectly when its power on the battery.

    After restart or start-up the laptop (on battery), it will be well when the adapter is connected.

    But, when I reboot when the adapter is connected, after his stop, just power light turns on for a second or two and gets off automatically. And not even the laptop starts manually by pressing the power button (LCD is turned off when the power light comes on for 2 seconds) when the adapter remains connected.

    So what I do is to pull the plug on the adapter, then start the computer manually by pressing the power button and reconnect the plug of the adapter to the laptop starts. It works well this way. Rest everything works perfectly.

    And this problem started after the update of the BIOS. Now, I don't know how to remedy the situation I don't know if there was a bug in the last update of the bios.

    Details of the update from: http://gulf.computers.toshiba-europe.com/innovation/download_bios.jsp?service=AE

    30/07/08
    Update the BIOS
    This Bios update adds functionality to your system.
    Satellite Pro A300 Toshiba of 3, 60 - WIN

    So please help me to solve the problem.

    Thank you best regards &,.
    Manjit M.

    Hello

    Try to update the BIOS again
    In addition, access the BIOS settings and set the default parameters. Save it and try again.

    Good bye

  • Try to install Adobe Acrobat Pro DC and it doesn't accept serial number, incorrect serial number is entered.  How can I get the correct serial number to enter?

    Try installing Adobe Acrobat Pro DC and it will not accept the serial number.   Receive the message invalid serial number.

    How can I get the correct number to enter?

    Hi chrise68847178,

    You can check your serial number of this link:find the serial number of your product Adobe quickly

    Also, you can check this link:error of incorrect serial number

    Let us know if that helps.

    Concerning

    Sarojini

  • Satellite P200 - 1 K 8 - could not get the display and audio drivers to work

    Hello.
    I'm getting desperate. I tried everything I could imagine.

    First of all - do not get the control center catalyst to work, I don't have the graphics driver installed now (I tried both - Toshiba and Mobility Modder modified driver ATi - none works.)
    Second - when I install the audio driver Realtek audio Manager is encoutering the problem and needs to close every time at startup. And Yes, I updated the BIOS to version 5.20 installed XPSP3, chipset driver installed (the most recent Intel homepage or one of Toshiba, anyone, always the same question).

    Help, please. I don't want to spend the rest of my life trying to get XP on my laptop.
    Thanks in advance.

    Can you please send the number of full model of your laptop?

  • Can not get the upgrade of our special email

    I received an e-mail offer to upgrade for $29.99 per month, but when I go to the link there is only the option of $49.99. How can I get the offer before it expires 26?

    You can check with Adobe sales support team:

    Cat phone and link number is provided in the link below.

    Pricing plans and creative Cloud membership | Adobe Creative Cloud

  • Satellite Pro L300 - 27H: number invalid would be and model

    The school that I work for bought recentley 32 laptops from Toshiba Satellite Pro L300 - 27H.
    All laptops have been saved for the extended 3 year warranty and Cashback 2010 promotion.
    One of these laptops has now developed an error and needs to be repaired under warranty.

    I tried to do it via the website of Toshiba, but the system refuses to accept the serial number or model number of the laptop, saying there are not valid.
    I sent support in this regard, but had so no response or ackknowledgment.

    Anyone know why this model is not listed?

    John

    Hello

    If the laptop needs to be repaired, I recommend you get in touch with the local ASP in your country.
    The authorized service provider might be able to help you don t send or wait for the mails, but call the guy. It s a common number is your country.

    Here you can find the ASP, responsible for you:
    http://EU.computers.Toshiba-Europe.com-> supported downloads &-> locate an authorized Service partner

    Good luck

  • Satellite Pro L300-PSLB1E: XP does not control the wifi to the power connection

    * + Hello + *.

    I have a model Satellite Pro L300-PSLB1E and a XP Professional SP3 on it.
    Already everything works because I had a compilation of drivers copy of the past.

    The problem is that XP does not control the WiFi works without danger the and it disconects when I close the lid.

    So I tried with the power that said safety program to:

    Bq. [06/04/08 Power Saver Toshiba Windows XP 7.04.02I | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpwrsav-es-20080519173239.zip] + doesn't work-error 0 x 0 +.
    And I tried also with the thought of program Toshiba wifi on 32-bit compatibility:
    Bq. [Intel PROSet/Wireless Software | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpro-ncs-20080416140552.zip] + doesn't work too-Said controller is not installed when you and full work +.

    So, how to control the peripheral power turn off on?

    Bq. * + thanks for your attention and patient. + *

    Hello

    Firstly the Toshiba Power Saver requires the installation of the common Module.
    The common Module for Win XP v1.00.05 can be downloaded from the European pilot page Toshiba.

    So before installing the energy saver, install common Module, restart the computer, and then try the energy saver.

    In addition the Intel PROSet/Wireless Software can be used only with the Intel Wlan card.
    Is the laptop supports the Intel wireless network adapter?

    AFAIK the L300 series can be equipped with a Realtek, Atheros and Intel Wlan card
    Check it!

  • Satellite Pro 2100: card network wireless not recognized after upgrade

    I have a Satellite Pro 2100 ad I used successfully a PCIMCIA 802. 11b card wifi for two years.

    Studying the manual, I discovered that the notebook is "wifi ready" (it has a wifi switch, a switch wifi of Alt - F8, and a section of the manual).

    I opened a Bay and found out a mini-pci slot. That's why I bought an Intel 2200 BG wireless adapter and I put it inside, which connects the sons of two antennas, located in the Bay. Finally, I was ready to son mask 11 and 13, as suggested in many forums. But when I put the card inside, unknown electrically. It seems that the mini-pci slot must be Electric.toutes impossible. My Bios is not impossible, but it.

    In another Bay close to the mini-pci card, I discovered an empty shell for a chip. Is this an impossible chip?

    Hello

    As far as I know that this unit is about 4 years old and at that time the unit is tested with the wireless network card with the PA3212U-1MPC part number. This map has been tested, is also compatible and can be used.

    I put t know what is going on exactly in your case, but new material should be recognized and the driver must be installed. I put t know what you mean exactly, but can you please explain exactly the situation?

    The card is correctly recognized and installed in the Device Manager?
    You can use FN + F8 key combination to activate the wireless card?

  • Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

    I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

    Hello

    All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

    Order of the facilities is as follows:
    -Windows XP
    -Display driver
    -Audio driver
    Toshiba - common modules
    -SD Card host driver
    -SD Card Driver
    -BlueTooth Stack
    BlueTooth - Easy Connect
    -Mouse driver
    -Modem driver
    -LAN driver included with Windows XP
    -Infrared driver
    -Toshiba Power Saver
    Utilities - Toshiba
    Toshiba - post Mobile
    -Toshiba Console worm.
    -Toshiba Hotkey for display devices

    I hope that you will be able to install Windows XP Home edition successfully.

    Good luck!

  • Satellite A300 - Chicony webcam does not work after upgrade to windows 7

    I'm frustrated so I came here to see if anyone knows a way to help solve this problem.

    I have a Toshiba Satellite A300, which came with Windows Vista 64 - bit pre-installed. After about a year or two to have the laptop, I decided to upgrade to Windows 7 64 bit. In the process, I believe that the driver of my webcam (Chicony usb 2.0 camera) has been eliminated.

    When I go into the Device Manager in the Control Panel, the webcam is not listed; nor is "imaging devices."

    I tried to download the driver manually, but I get an error message "Webcam open fail." Restart the computer or the camera. »

    My computer has registered my webcam as 'unknown device '.

    If anyone knows how to solve this problem, please, I beg you, let me know.

    > My computer has registered my webcam as 'unknown device '.
    > I tried to download the driver manually, but I get an error message "Webcam open fail." Restart the computer or the camera. »

    This means that the the webcam driver is not installed correctly.
    Visit the page of European driver of Toshiba and install the software/driver webcam just for this model of laptop.

    If the installation fails, restart the laptop and the tent.
    This should solve the problem.

  • Satellite Pro M70 - USB port does not recognize the device

    My Satellite Pro M70 has three USB slots, one on the left and two (vertically one above the other) at the back of the laptop.

    The top slot to USB in the back started giving problems. Sometimes, my computer can't see all that I plugged in there. But if I unplug anything - usually the printer or the mouse - the computer will usually see it then.

    What is the problem? Can do nothing about it?

    My operating system is XP. and my laptop is 4.33 year.

    Thank you.

    Hi Mannix,

    Have you already updated the chipset drivers?

    I read in the forum about these questions and normally helps to reinstall the chipset driver. :)

  • MacBook Pro & Samsung Smart TV: could not get the display via HDMI

    Hi Forum members,

    I'm not able to get the display of macbook to smart tv via HDMI cable.  Here are some of the conclusions that I have. Can someone please shed some light on this weird question.

    MacBook Pro Rentina 13 "El Capitan 10.11.5.

    Samsung Smart TV 48 "UA48J6200

    Crush - HDMI cable.


    -TV says 'No Signal'.

    -J' checked the cable is good since I'm able to get my Dell Latitude processors E7450 and controller display.

    -Go to Preferences > display. I see no possibility to detect the display etc...

    -Able to connect same macbook to the sony smart tv at my friend using the same cable and it's all good.

    At this point, I am not able to understand where is the problem... TV or Macbook

    Thank you.

    Hmm. Have you tried to get your friend or someone connect to your Samsung Smart TV?  It does seem like your Macbook or the cable are the issue.

    Edit: actually re read your post. I think that to see the option detect go to Preferences > poster under view press on and hold down the option key. bottom right, it should appear.

Maybe you are looking for