My Satellite Pro L Gets a BSOD after going into sleep

Similar Questions

• Satellite Pro C870 - Internet connection fails after a fashion 'sleep'

  SATELLITE PRO C870-19N. Internet through an ethernet cable. Windows 8.1

  Hello

  My problem:
  I turn on the computer. It recognizes the connection internet (Ethernet cable). I work without any problem... and I left (a few minutes)... I come back. Black screen, computer sleeps. I wake it up - I have to enter my password - and he says there is no internet connection... I have to stop it and restart it.

  Can you help me?

  Thank you.

  This problem occurs using only the LAN connection or have you noticed the same situation using Wireless LAN?

  In case this happens only by using the LAN connection, I recommend you to check if you can update the LAN driver.

  You can also right click on the network icon (in the taskbar) and could choose to diagnose and repair.

• After going into sleep mode after automatic update of Windows 7, Pavilion p6210y PC won't sleep

  In two weeks, after an update of HP launched automatically, my monitor is not recognized - I tried to restart my PC via the power button, but the action brought everything back without interruption to the place.  Finally I made the necessary update HP closed down and all was back to normal.  Last night I made a full stop and a Windows 7 launched updates (do not turn off your computer, etc..).  This morning when I powered back upward, I got messages on the windows during Setup, etc, then everything returned normally.  I worked for a few hours and left the machine - it entered into mode 'sleep' and now I can't get out of fashion "Eve".  If I power cycle the monitor, I can messages same "cannot detect.  If I try to shut down the PC via the power button, the light is orange/sleep, I hear a humming, then seeing if off, then back to orange/snoring, reverse, etc..  Keeps the bike like this.  I'm afraid that question a couple of weeks may have been a sign of early warning of a problem of h/w, but am not sure.  Can anyone help?  I am not very savvy h/w... and hope that it is something more simple than that.  The PC is 2.5 years.

  Your need to deactivate "standby" as soon as POSSIBLE to determine what is happening. You have 2 numbers because your motherboard is the infamous M2N78 - LA.

  That hum maybe the CPU fan:http://h30434.www3.hp.com/t5/Other-Desktop-PC-questions/To-all-with-M2N78-LA-CPU-fan-constantly-changing-speed/td-p/704265

  The other issue is more complex. Overheating the Nvidia chip. This chip share logic and circuits with the SATA hard drive controller and the graphics port. http://h30434.www3.HP.com/T5/desktop-hardware/m8530f-desktop-PC-with-a-M2N78-la-mother-board-doesn-t-see-my/TD-p/181716

  Your need to read each section and each answer. I suggest you save and move forward with all the measures that you feel is of advantage.

• Satellite L50-B-1HU randomly goes into sleep mode

  Randomly, my laptop (Satellite L50-B-1HU) goes into sleep mode.
  It happened at least 10 times in the last two weeks.

  Once by chance, he goes to sleep he requires the power button to turn, but the power button should be 1 to 3 times, as it can to sleep just after pressing the power button.

  Its happen even if the pad is in use. In windows power options, I turned also to disable the mode 'sleep'.

  The laptop itself has been used for two weeks (which has passed since the first use)

  Any advice?
  Thank you

  Like Notepad running in the power of the battery or also using the power adapter plugged?
  From my point of view of a few notebook could enter the mode "sleep" due to low battery.

  Also some 3rd party application preinstalled on the laptop could set the camera in mode "Eve".
  Guess what: try to start the laptop is safe mode and let it run for a longer period of time. It would be interesting to know if the laptop would be access to the sleep mode using safe mode.

  You can also use the command "powercfg. Windows 8 PowerCfg has a useful switch called - energy.
  This technique is valuable to solve sleep problems.
  Start the console with the command: cmd.
  In the console type: powercfg-ENERGY

  Now it takes 60 seconds and will create an HTML file that you can open in your web browser to get the full report of energy. Now quite sure if the information could be useful, but it might be interesting what details this report would provide.

• Vista goes into sleep mode automatically just after the restart

  The following problem was irregular. Sometimes, other times not. I'm totally frustrated as to why it is happening and I would like to solve this problem, now and forever.

  Yes, first facts: I have an Asus G71Gx laptop game with Nvidia Geforce GTX 260 M. 6 GB of memory, Windows Vista 64-bit. Do not think that other information is necessary, unless I'm mistaken.

  The problem: well, just after the start/start my laptop goes into sleep mode. As in, Windows starts fine and I see my desktop with all the shortcut icons and the background, and then all of a sudden the screen goes black (with two Dim lights blue on the screen - fellow Asus G71Gx users will know it), and the power led button flashes slowly in and out, as if it was in sleep/hibernation. The led light cover mode monitor "sleep". I did the whole "all never put under power options. I've updated my Nvidia graphic drivers for later. I even disabled Hibernate in the command prompt. Seriously, I have above average PC knowledge. But it has trampled me... everything short.

  Sometimes, I have to go through this cycle up to 9 or 10 times and then stops. Other days there is no question. But I still have to reboot just to be safe and to avoid the game stutter (another question that I don't know what it is, since I was the latest GPU drivers). But I can live with that.

  It cannot be an overheating GPU. I mean, it's at the start and at the present time, it is cold enough to have this piece as a cooler for the GPU! Haha.

  I thought about possible power supply problems. But how to test it? The laptop doesn't have it, the first week I got it. I use an adapter to put the American card in European decision-making.

  It is the ONLY major problem I have with this laptop. Sleep at startup. The other two, being game stutter if I don't restart my laptop and double tapping (seems to be an Asus problem according to the forums), are quite minor and I can live with that.

  Any help with this would be GREATLY appreciated. I'm VERY tempted to get windows 7 and do a clean install, but Vista was not really giving me any problems. But if I know that this issue is associated with Vista, then I say Bravo to Vista...

  Edit: Apologies for writing this thread Windows 7 and explore the internet forum. Don't know how it happened! Well I'm leaving here now, and hopefully this will get sorted.

  After 2 replacements of mobo that apparently caused this same prob, what finally fixed for me has been updated the chipset drivers.

• external unknown device after device, hard drive or the printer goes into sleep/hibernation

  I guess that the problem occurs when each device goes into sleep/hibernation because this is happining to only my external hard drive and printer.  All other devices connected by USB have never no problem and will not go to standby or Hibernate. Difficulty I should close down then cold restart without connected device. then after the system is installed and running reconnect the device then it is recognized and works. I tried to just the printer powerdown (cables power and usb for printer peripheral but comp still running while still not recognized after that repower printer and then usb connection get 'unknown device'.)  The only way to obtain a recognized device, DHM or printer is as above full stop and then reconnect.  Any help would be greatly appreciated because it really is a pain and has cost me a printer that I threw out the window, luckly the window was open.  Thanks again for your time and your help very frustrated JK

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  I suggest for the link and try to run the Troubleshooter:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2:

  Try to update the device drivers and check if it helps:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Check out the link for more information:

  Looking for drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/finding-drivers-what-to-do-when-your-hardware-wont-work-with-Windows-Vista

  Method 3:

  I suggest you to disable and re-enable the USB controllers:

  a. click Startand then click run.

  b. type devmgmt.msc, and then click OK. Device Manager opens.

  c. expand Bus USB controllers.
  Note: You need to scroll the list to find this point.

  d. right-click the first USB controller under USB Bus controllersand then click Uninstall to remove it.

  e. Repeat step 4 for each USB controller is listed under Bus USB controllers.

  Note: restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  Let us know if it helps.

• Satellite Pro A200 - Webcam stop working after 10 to 15 minutes

  Hello

  I need help to solve this problem. I use the Satellite Pro A200 with Windows Vista. When I use my computer online my web cam stop working after and never restart again until my computer restarts.

  Please send me some suggentions how to solve this problem.

  Thank you [email protected]

  Hello

  How did you notice this problem? You get an error message or something else?

  It's really hard to say why this happens, but first I would try to update the driver for the webcam. You can get the latest version on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Install the latest version and try again.

  By the way: you run factory settings or you have installed your own version of Windows?

  Welcome them

• Satellite Pro U400 - 15 p hangs after enabling the Realtek RTL8187B WLan card

  Hello

  I recently bought the Toshiba Satellite Pro u400 - 15 p. This notebook is originally without any operating system included. I installed Windows XP Home SP3 on it and downloaded all the drivers from the Web from Toshiba website. Everything works well except the WiFi - RTL8187B.

  Driver has been installed correctly, when I turn the WLAN on everything is always OK, but when I connect to a network wireless Windows XP hangs after some time - without notice or BSOD - and the only thing I can do is to restart the PC holding down the button for 5 seconds.

  I have:
  -installed the latest BIOS (v3.70),
  -installed the last version of drivers available (v6.1150.1112.2008)
  -tried how it works on Vista Home Basic - it does not either, but on Vista only connection must be reset.

  I searched on the web (perhaps not all), including this forum, but I was unable to find a solution.
  Now I am seriously considering warranty claim, please help me to avoid that it ;)

  Hello

  It's really strange.
  Are you sure that this happens because of the WLan card activated 100%?
  I mean there could be another reason for this gel

  I'm U400 too and I m running Win XP and Vista without problem!
  At that time, I m using WiFi and everything works ok

  I think it s not a Wlan related question, but there must be another reason why this laptop locks maybe a problem of RAM or something like that.

• Satellite Pro C850 does not work after Bios Update

  My satellite pro c850 cd does not work after updating the bios of toshiba.

  What should I do?

  Saying: don t work do you mean it does not fuel upward or what do you mean exactly?
  Flash the BIOS correctly?

  Maybe something went wrong during the upgrade, which means that l ROM flashed module isn't properly

  In most cases a special disc of crisis of the BIOS would be required to operate
  Not sure if you can get it repaired by your own
  Check this thread. Maybe this helps:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59637

  Otherwise you need help of the authorized service provider available in your country.

• Satellite Pro L670-16Z - XP installation after using Windows 7?

  Regards to all forums. I'm new here.

  Next week I should get a new pc, * Satellite Pro L670-16Z *. I have a few questions.

  * 1. * If, during some weeks, use my computer with Windows 7, after that I can downgrade to Windows XP?

  * 2 if I downgrade to XP, you can reinstall Windows 7 new?
  Thank you for the replay.

  If you want to reinstall Windows 7, you must first create the recovery disk. There should be an icon on the desktop. Use good quality DVD discs since those of poor quality can cause errors during recovery.

  To install XP, you buy XP in a store (which may be difficult).

  You can run XP in Windows 7 Professional or higher using a Virtual Machine.
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

• Satellite Pro L40 does not start after changing the BIOS settings

  Changed some settings in the bios last night and now when I boot I get a screen black lights flash and hard drive lights up but nothing on the screen.

  There is no password on the bios... How would a BIOS reset to normal?

  I put a windows disc now, I hear the disc spin but nothing on the screen

  (I think that I have come to the right place on the forum)

  It s a Toshiba Satellite Pro L40 model psl4be.

  Thank you

  > There was no bios password... How would a BIOS reset to normal?

  You can set the default BIOS ONLY inside the BIOS access BIOS by pressing F2 or at the beginning of the initialization of the order

  But I doubt that this problem is related to the BIOS.
  Maybe it s just a simple bad luck that this problem happened exactly after change something in the BIOS.

  Try connecting an external monitor and check if you can see something on the 2nd screen.

• Satellite Pro L870-18R - no boot after upgrade CPU

  Hello

  Bought the "SATELLITE PRO L870-18R" alongside a "Intel Core i7-3740QM 2.70 GHz FCPGA988 L3 6 MB 4 Cores CPU 2.70 GHz" to upgrade the processor and get a beautiful machine.

  Boots of machine as expected with its stock i3, but white LED will blink once and no post when upgrading the processor is applied.
  Is their a bios that will support this CPU, otherwise what is the max processor that toshiba will move to. Little bit discouraged, I can't upgrade.

  Is their a bios that will support this CPU

  BIOS updates are not released to allow new media of CPU, but the BIOS updates are released to fix possible problems for laptop...

  If this is not the case, what is the max processor that toshiba will move to. Little bit discouraged, I can't upgrade.

  Still is it that manufacturers of mobile phones do not support updates on own laptops... This means that there is no further information on the possible processors and supported.

  However, a new processor usually requires a BIOS and chipsets support... so in case you want to make these updates (of course only at your own risk) then you will need to use a CPU that is supported by the Intel Chipset. But there is no guarantee that this notebook would functions even if you use a processor that would be supported by the chipset...

• Satellite Pro C50-A-154 - battery after automatic update problems

  Hello world!

  First of all, I must apologize for my bad English, if it is not as good as be... after that, I could start to tell you all what happened to me in the last few weeks...

  I have an a C50-A-154 Toshiba Satellite Pro and I use it for stuff like watching youtube videos, listening to music, and do this kind of thing than a normal user.

  A few weeks ago a Toshiba Tempro Alert remember that there are software updates avaliables to download for my laptop, so I installed them, I normally unplug my battery when I have the power cord plugged in, so I didn't realize after a week after that my battery was not recognized as it should be for my toshiba.

  Initially, windows said that it is fully charged and no need to continue to load, so I unplugged the power cord and the laptop shutted down (with battery connected and therefore be charged to 100%).

  When I plugged it again the power supply cable, windows said that the battery was empty and told them, hip but not load...

  At the same time, a new toshiba update was released, this time was for the bios, if I have that it is probabbly fix the problem with the battery, so I updated the BIOS and windows says that the battery was full charged... I couldn't believe...!

  But the system always goes down when yo unplugg the AC cord, and now battery said once again that it is empty...

  Yesterday was a new update for the Bios, so I give another chance, but nothing has changed... I can't use the battery, and I have no warranty, so I don't know what to do...

  I read a lot of posts on battery of problems lately, in the forums of europe and US forums... maybe it's a software problem? Maybe toshiba boys don't have any idea about this problem?

  Thanks for your replies!

  Ruckmess

  Hello

  I think it might be a software related issue.
  In Device Manager, you will find the battery input compatible Micorsoft ACPI method. It belongs to the Advanced Configuration and Power Interface.

  I recommend you to uninstall the three topics that you might find in the battery area.

  Reboot the laptop. After restarting again, the system should install all devices removed once more.
  Usually, this should help to unravel the question in the case of its just system problem

• Satellite Pro C660 - 21 d - BSOD when installing Win XP

  Hi all

  I bought 5 Satellite Pro to join my domain name which is a network of Server 2003.
  I am wanting to downgrade windows 7 home windows XP Professional laptops, but I'm having no luck.

  I tried to boot from CD but I have the blue screen of death.
  I also used a windows 98 Startup disk to format the HARD drive, but I still get the error message on blue screen.

  Hoping that someone could help me with this problem.

  Thank you very much
  [email protected]

  Hello

  You must load before installation of WXP start is SATA driver.

  Check, please follow the documents from Toshiba:
  http://APS2.toshiba-tro.de/KB0/TSB7B020R0000R01.htm
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

• Satellite Pro L300 will not start after the Bios Update

  Help please.

  I simply formatted laptop Satellite Pro L300.
  I used all the drivers updated Toshiba and everything is fine.

  I then updated the bios with the latest version.
  After this laptop computer is unbootable but continues to scroll through the start menu and any which option to choose it just keeps doing the same.

  The ides welcome

  Hey Buddy,

  What start menu, you mean?

  I put t understand how it is possible until you wrote that your laptop does not start?