My satellite will not turn on at all - its just dead

Similar Questions

• Re: My C50-A-156 Satellite will not turn on

  There are 2 days I was at a friend s and I left my charger it and its ws output 19v so I got another charger and its output is 9v then I tried and he came to 30ms then the laptop off completely.

  I got my charger back today and what he tell me his load, the witness orange but when I turn it on it goes for 10secs then turns off and all the lights go out. I have to pull the battery in and replace it for this to try a new fee. He was in charge or 10 hours and still the same.

  Any help will be appreciated thanks. I tried the electric flush

  > ws 19v output so I got another charger and its output is 9v then I tried and he came to 30ms then the laptop off completely.

  The use of bad power adapter with a different value of Volt would damage the motherboard.
  What to say, I think the power of electronic power supply on the motherboard has been affected due to the use of non compatible adapter.

  According to me, the only Toshiba authorised service partner would be able to help you. Good luck

• My acer aoa110 will not turn on wifi all of a sudden. grey button stays...

  Tablet has been fine, but suddenly I can't turn on the wifi

  Thank you. I was hoping to avoid that, so I wouldn't have to put up again, but it worked.

• my laptop will not turn on after a recent windows update

  Windows recently did an automatic update on my laptop and need to reboot to complete. However, it will not turn on at all now. I tried to run the install disc and used to attempt to repair my system and yet it is said that it is not repairable. Ive also tried to restore to a previous point, and yet, he won't do that. Help!

  Hello

  1. the updates are was?
  2. what exactly happens when you try to start the computer? You get the error message?
  3. What are the error messages that you receive when trying to run the system restore or Startup Repair?

  Step 1: Use the option last good Configuration see and check if you are able to boot to the desktop.

  Reference: http://windows.microsoft.com/en-US/windows-vista/Using-Last-Known-Good-Configuration

  Step 2: Check if you are able to boot into safe mode and send back the same.

• Tecra M9 - sometimes that it will not turn on

  Hello.

  I have a Toshiba Tecra M9 who has a problem. Sometimes it will not turn on. You must remove the battery and press the power button. When it loads will work fine until I have move or take it upward and then hangs and crashes. Then, you must take the battery out so he can turn it back on if it will be in all.

  I tried to reload xp, tried without battery, tried a known good ram in both slots, a different hd and took part to see if I can see something loose, I have now run out of ideas.

  any help would be good

  Thank you

  Hello

  Which is really strange, buddy... In my opinion, that sounds like a hardware problem, what do you think?
  You should contact a technician for laptop (authorized service provider). Guys can verify and Exchange defective equipment parts. Maybe a mailfunction of the motherboard or the CPU

  By the way: you have updated your BIOS? If this is not the case, to do this, first!

• Excite AT300 not turn back to all

  Noticed these last days, that the battery icon was red with exclamation point, even if it has been fully charged and when you check in the settings it shows battery with 10 remaining hours information.

  The Tablet since acting very strange.
  From time to time, it starts to vibrate for a second cutting when your working on something and the other day, he is stuck in vibrate mode until I have shutdown and restarted.

  I have no sound now when playing music and videos and the time and date changes randomly too.
  I turned it on this morning and the date was set in 2005?
  I then reset the date and close, now it not turn back at all?

  Any suggestion or help will be appreciated with gratitude
  Concerning

  Are you able to perform the hard reset?
  For that you must press and hold the power button / stop and button volume up at the same time.

  The menu would provide a few options. One of them would be the factory reset.
  Give it a try.

• Satellite L355 not trun on at all even with power

  Hello

  My Satellite L355 will not turn. She lights up indicating that it is powered both the battery and the power cord, but the actual commissioning light won't-is not in mode 'sleep', it's just next door. I took out the battery and re-installed several times also took out the hard drive and reinstalled.

  Could this be the motherboard?
  Any idea is appreciated - thank you!

  Hello

  Is your laptop under warranty?
  If so, an authorized service repair is free and will cost you nothing. :)

• K010 ENVY: my laptop will not turn off

  Hello

  When I shutdown/hibernate/standby/resume my laptop, it will die completely.

  All programs will be closed (when stop or restart) and I think that OS will also close. But the laptop will not turn off. Power LIGHT and fan will stay on.

  And when I try to Hibernate, everything is ok, but I have the same problem.

  Whenever I have to turn it off by holding the power button, otherwise the battery will be discharged.

  After manual turn off, when I turn it on again, everything works correctly:

  -If hibernation: OS will continue to last situation.

  -If start/stop: OS works normally without error or warning.

  After sleep, OS works from the beginning. Because the data stored in RAM and will be deleted after power off.

  Perhaps a portable automatic perevent equipment turned off. All the drivers are up to date.

  Is there a parameter/software to check and fix my problem?

  Thank you

  Hello

  You are welcome

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online

  NEW HP computer bought in September, already updated to Windows 7 with HP upgrade kit. I installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online. Also can not get a pop window to activate by phone. HP says that I must fully restore Windows Vista x 64 Home Premium AGAIN at the factory all MICROSOFT updates, and THEN... so I can reinstall Windows 7 upgrade. Why now only after 30 days Windows 7 refuses to ACTIVATE! Nothing but run between Microsoft and HP > Please HELP without having to reinstall EVERYTHING on my computer.

  Please go to http://www.microsoft.com/genuine/ and click on the button to validate Windows, and then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  -Online Windows XP: double-click the executable file to run the tool.

  -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

  2. after running the tool, click the Windows tab and then click on copy to the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new post in the appropriate Microsoft Genine Advantage forum and paste the results of the WGA diagnostic data in a detailed post: http://social.microsoft.com/Forums/en-US/category/genuine

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Have VFC Z216Gx/b, which suddenly will not turn on.

  Have VFC Z216Gx/b, which suddenly will not turn on. AC is on but nothing happens when you press the button 'on '.

  Hello Bob,

  Welcome to the community of Sony.

  Try to perform all the steps here: https://us.en.kb.sony.com/app/answers/detail/a_id/35540/c/65%2C66/kw/35540

  If the problem persists, contact Sony Service support here: http://esupport.sony.com/US/perl/service.pl

  Kind regards

  Miguel

  Note: If my post answered your question, please mark it as an "accepted Solution".

• My Toshiba Satellite will NOT connect to the WiFi in my house of employers, but connects everywhere else I will!

  My Toshiba Satellite WILL NOT connect to WiFi in my house of employers, but connects everywhere else I go; I have Windows XP Home Edition SP3, and there a router Linksys WRT16ON. My network card is an Atheros AR5001X + Wireless Network Adapter (and says "this device is working properly". I tried disabling, entering all information, penetrates is not in the news was unchecking the "Enable IEEE 802. 1 x authentication"(and whenever I go in there, he checked again) changed on 'Open' and 'AES' TKIP, WPA (which is) and the password is correct, restart the router, moved the laptop around (the router was in my room, now it is in the thnxt room and it Me REPEAT JUST : 'Validation of identity' and 'impossible to find a certificate to connect to the network'.) I can connect with ethernet, but not with this new situation of the House, do I have the wireless. WHAT ME MISS? I did this for weeks and even now, it says I'm connected, the signal strength is very good, often great, but Explorer cannot display this webpage. Can someone tell me what to do? Thank you!  Allie

  Your old Toshiba equipped with an adapter wireless which is likely to be used for Wireless-a, b, wireless and wireless-g (the project).   Your employer has a newer version (not the last and larger, but much more recent than your equipment) router Linksys that is capable of wireless-b, wireless-g and wireless - n.

  Your most likely problem is that your employer has set up his router to "N-only.  Wireless n uses the same radio frequency as wireless-g (this is why detect you the "excellent" signal strength), but uses a different protocol (this is why you can't connect).

  Politely ask your employer to change the mode 'network' from the back of the default router of "mixed".

  The router manual is here: http://homesupport.cisco.com/en-us/support/routers/WRT160N see p. 13 ' Basic Wireless Settings.

  Looking for a certificate message was probably bound to have the box 802.11 x checked.  This box should NOT be checked for home wireless networks.

• My trusty 2410xi has a mechanical jam and will not let me do all the work

  recently, when I turn on my trusty 2410xi all-in-One, it of a mechanical blocker and will not let me perform all tasks. I tried to disconnect the supply of the data lines, nothing helps. Looks like the print head may be stuck? I remember having the same problem a long time ago but don't remember what could be the solution to the problem.

  There are a few things that you, and not when this happens. Most of the time it's a very small piece of paper holding things to the top, or the printer just need a reset to zero more deep. The document following the link will take you through all the things you can try. If this does not work, you will need to replace the printer. Let me know what happens.

  http://goo.GL/BnGuX

• I have 6 phone is dead.  Will not turn back on

  I have 6 phone is dead.  Will not turn back on

  See Troubleshooting in the paper support. If your iPhone, iPad or iPod touch won't turn on - Apple Support

• iPhone 6 s more. The music will not play an entire album. Just of repetitions the first track.  How can I get it to play all tracks in order?

  iPhone 6 s more. The music will not play an entire album. Just of repetitions the first track.  How can I get it to play all tracks in order?

  In-app music, press the "mini player" (the narrow ribbon at the bottom showing the song that is playing).  Which opens upward from the view of work full screen of the song being played - down at the bottom of this screen are icons for shuffle and repeat, press Repeat until the gray background disappears.

• I went to pay my own Bill Bill of my family, now nothing will work if I'm on WIFI, no internet, my IMessage/Facetime will not turn on. I've tried everything. Help?

  I went to pay my own Bill Bill of my family, now nothing will work if I'm on WIFI, no internet, my IMessage/Facetime will not turn on. I've tried everything. Help?

  Honestly, this sounds like a problem of carrier. Are you able to make/receive calls or send and receive text messages? I would first check with the carrier to make sure that your phone is still set up to use mobile data. Something was accidentally deleted when they merged your bills.