My screen brightness settings do not stick after that I reboot my computer

Hello

When I put my screen brightness for the "connected" by setting the parameter changes on the same level as the 'on battery' setting after I reload. How can I fix it?

Thank you

Christi

Advertisement

Hi Christi,

Windows can store the brightness level of DC correctly in the brightness of the AC setting. When this happens, you can see that the screen is set to the brightness level set for the battery after you start in Windows 7. To resolve this problem, you will need to adjust the brightness of AC in power options plan. To do this follow the steps below:

1. click on Start, click on Control Panel

2. open hardware and audio

3. Select the Power Options

4 Select Change Plan settings

5. under AC section adjust the Plan brightness to the desired level.

Bobby

Tags: Windows

Similar Questions

  • The screen brightness setting does not appear in the mobility Center

    original title: how is the screen brightness control does not appear in the center of mobility?

    In the past the mobility of my laptop Vistas Center contained a slider to set the brightness of the screen.  My computer screen is dark and I want to adapt it to a brighter screen.  How can I get my rear screen brightness adjustment?

    Hi bigwaterboy,

    1. you remember to make changes to the computer, after which the issue started?

    I suggest updating the graphics card driver on the computer and check if it helps:

    Updated a hardware driver that is not working properly

    Reference link:

    Using Windows Mobility Center

    I hope this helps.

  • Portable keyboard on Vista you will sign in with my password, but will not type after that

    * Original title: keyboard on my laptop computer vista will allow me to connect with my password, but will not type after that. I use a screen keyboard and mouse to this type. I even restored to factory settings. Always won

    My keyboard on my computer vista laptop will only sign in with my password, but will not type after that. I use a screen keyboard and mouse to this type. I even restored to factory settings. Still will not work. Checked ease of access settings and language settings, running of ideas. I tried another keyboard, failed to mention. Re-installed drivers as well. Any help would be great.

    Thanks for your reply. I tidied up my lap top for about 5 months and just used my office for awhile. One day I was in the mood to tinker around with my lap top, then when I turned it back B I N G O!  My main advice worked again. Matter of fact, I use it now. Thank you for your effort in the e-mail back me on this issue. good karma can follow you anyway yoy travels take you.

  • Keyboard does not. Able to use for the connection does not work after that.

    The keyboard works to connect. But does not work after that.

    Hello Sml15,

    The embedded screen keyboard should still work even if the physical keyboard isn't.

    Try this first...

    Press and hold the Windows key and the space bar.

    If no joy, go to the search bar and with the built-in keyboard, type the filter keys and choose key filter on or off.

    In the window of the ease of access to the keyboard, disable FilterKeys.

    If all goes well, which will fix the problem.

    Let me know how it turns out.

  • I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

    I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

    I think you're looking in the root folder not your home folder.   Tilde ~ in front of the first slash indicates the folder.

    Try this...

    Quit Safari.

    Open a Finder window. In the Finder menu bar, click go > go to folder

    Type or copy paste the following text:

    ~/Library/preferences/com. Apple.Safari.plist

    Click OK, and then move the com.apple.Safari.plist file to the trash.

    Restart Safari to test.

  • roboformtaskbaricon process does not close after that firefox 9 is closed

    Hello

    roboformtaskbaricon.exe (v754) process does not close after that firefox 901 is closed. Even if I'm wrong, my guess is that firefox pushes this process of firefox, forcing him to run on its own. If it's a matter of roboform, then I will contact them.

    Thank you, specialist

    On the next page, scroll down to "RoboForm controls", then scroll down to 4. The taskbar icon under this heading. It seems that maybe the item to which you are referring. Taskbariconroboform .exefile name, it involves the Windows taskbar rather than the Firefox tool bar.

    Clarification on roboformtaskbaricon.exe, its function and that it should close when you exit Firefox, Roboform online technical support contact and leave all the details of your question:

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  • My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

    My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

    What can I do?

    Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  • Epson Aculaser C 1100 printer does not print after that the text of the error 'install C Tnr basket' black and printer doenst photography black and white or grayscale pages

    Epson Aculaser C 1100 printer does not print after that the text of the error 'install C Tnr basket' black and printer doenst photography black and white or grayscale pages

    the printer is not the shades of grey even print cartridge is not yet empty

    y at - it software for hauler color printing?

    Thanks for your comments

    Hello Nilsvolkel,

    Thanks for the reply.

    I'm sorry for the late reply.

    I appreciate your patience and time.

    Do not require any special software.

    However, you can use the steps in the following articles and check.
    Reference:
    http://eSupport.Epson-Europe.com/ViewArticle.aspx?LNG=fi-fi&kbid=328037&data=FCFfEfoyEiGLYDIUqzWyE0QE3127X87y&CL=1

    http://Windows.Microsoft.com/en-us/Windows/choosing-print-options#1TC=Windows-7

    Please keep us informed.

    Thank you

  • Why DW does not close after that I downloaded to my site and push the closebutton?

    Why DW does not close after that I downloaded to my site and push the closebutton?

    Hello sorent26443032,

    This kind of problem occurs usually when there are 2 cases of software are running.

    If you are on a windows machine Please make sure that there is that no duplicate instance is running in the the Task Manager for Dreamweaver.

    If you are MAC please check the same in the activity monitor.

    Concerning

    Vivek

  • Slide show not repeated after that some buttons are used?

    Hello

    I have this slideshow that I am so close after completing, but there is a problem I'm having with it not repeated after that some buttons are used. I tried to understand what could be the cause, but I can't see what it could be. According to me, that I'm so very close to having this if it wasn't for that matter.

    Slide show buttons '1' and '2' work perfectly, however '3' to '6' buttons do not work completely as it should. During the presentation, as he plays through the slides, if you click on the button "1" or "2", you are taken to the corresponding slide and the slide show resumes automatically, which is correct. However, if you click on one of the buttons "3" to "6" you are always taken to the corresponding slide, the slide show does not resume and remains on this particular slide. I looked at the code for the Action Script 3 several times and I don't see what could be causing this but I'm not too experienced so that there could be an error, no matter how minor, that I'm missing.

    I have attached the file and if anyone has any advice at all or can somehow help I would REALLY appreciate it!

    Thank you

    William

    Is your link to the object or picture.  I ran into this many times, I accidentally select the frame and not the object in the slideshow for the link.

    Although he thinks through the problem only comes when you go directly to the frame and not when you play through.  Maybe action that activates the link lights when the object is revealed onstage on a previous frame.  When you jump on the structure with the object already play in the advances head beyond the line of code providing the link and instructions is therefore missing.

    If the code with the link is on frame 10 and the function to move to the slide rests on frame 15, the film would not only go 10 frame, but also actionscript code that frame so lack the instructions to be a link.  Don't forget that this programming happens on a timeline, if the read head misses the keyframe with the instructions, that he will not return to them to find it for you.  Try to make a keyframe a picture before ordering GOTO AND STOP and put another link it so when the playhead crosses the new keyframe the link code is read correctly.

    That's what I'd do to test the theory,

    Good luck

    Brett

  • ProBook 6570b: screen brightness works do not, the unknown device on PCI

    Hello

    I have a Probook 6570 b with processor i5 here. He is running on W7 x 64 professional. As in all computers, we decided to replace the hard drive for an SSD. After replacing the hard drive and reinstallig W7 and drivers, there is a problem that I can't fix. It seems that I can't get the Fn keys for brightness screen work. The others work, volume gives a nice popup, evenso buttons additional display.

    Unplug the power supply makes the screen dim brightness. Who works. In the energy configuration screen, I can also adjust the screen brightness properly. Only the driver for F9 and F10 does not work.

    I don't know if it's related, but in Device Manager, I get an unknown device on a PCI bus. I have not been successful in finding drivers for this one as well. In the detailed tab, it says: * HPQ6000

    Thanks for responding!

    Hello:

    The 6000 HPQ needs this driver...

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212930&swItemId=ob_124200_1&swEnvOid=4059

    Have you installed the graphics driver and hotkey?

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212930&swItemId=ob_129672_1&swEnvOid=4059

    I can't give you the graphics driver because your laptop can come with 2 different graphic configurations.

  • Satellite A660 - 11 M - brightness adjustment does not work after hibernate

    Sometimes, I find that you use F6, F7 to control brightness does not work. This only seems to happen after a fresh reboot, but after being out of hibernation.

    I am running Win 7 Home Premium 64-bit and using the latest NVidia driver (obtained from toshiba yesterday Web site): 8.16.11.8988

    A way to solve this problem?

    Hello

    From my own experience, I can say that all the FN buttons work perfectly after hibernation, standby, restart, etc.. No problem at all!

    I put t know what is the problem, but in your case would be to reinstall the package of added value and utility to Support Flash Cards. Two tools to control the FN key functions and can be downloaded from the official page of Toshiba.

    But before you reinstall it, remove older versions first. Then install VAP, restart and finally Flash Cards Support utility.

  • Re: Satellite C660 screen brightness adjustment does not work

    Hello

    Its been 10 days since I brought my Satellite C660 - series laptop.

    Fn + F6 or Fn + F7 keys for brightness control do not work. I see no change in brightness. There is no information or indication of the setting shown on the display.

    Can anyone suggest an alternative to set the brightness of the screen?

    Other keys FN + Fx work correctly?
    You can change the display brightness by using the power management option?

  • brightness key does not work after bios update

    Hello. I have laptop 650 hp, everything has worked until I have updated the bios after this brightness keys don't work. I tried reinstalling the drivers, restored, updated the bios, hd formatted, installed windows and drivers the latest and still nothing. all other keys work fine. checked the buttons, they all work, it's just the brightness function is not working. Thank you.

    the version the older BIOS, now his market not :/

  • brightness key does not work after the upgrade to window

    I have a laptop hp 2000 - 2d28tu... yesterday, I upgraded its window 8 to 8.1 .after that the brightness is not increased or decreased by using the shortcut keys. . can someone tell me what is the reason behind it and how to solve it.

    Hello:

    You will probably need to install the graphics driver if the brightness is stuck up and the Fn keys do not work to reduce the level of brightness.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-126704-1&cc=us&DLC=en&LC=en&OS=4158&product=5393385&sw_lang=

Maybe you are looking for

  • My iphone screen 6 hanging suddenly during use.

    My iphone screen 6 hanging suddenly during use. Subsequently, the screen is empty. I can't turn off the phone also. He's obviously still works. Siri is active and the calls are coming. However, since the screen is blank, I can't use it. Is it possibl

  • Satellite X 205-SLi5 - can I set both drives in RAID-0 HARD

    I just got a X 205-SLi5... can I raid the two drives together in RAID 0... and if so, how? I can't find any info about it. Thank you

  • Can satellite U500 - I go back to XP?

    I have a new I500 Satellite with Windows 7 installed. He frustrated me beyond belief as a control feakes. Can I simply start from an old XP legal disc and expect a continuity of operations? I expect a reformat but there are other questions or problem

  • RUN32. DLL error message

    Windows System32/ShimEng.dll file does not work in windows.  What is this file do and how do I fix this error?

  • RAID battery showing as degraded, but is - this?

    Hello everyone, I have a PowerEdge 2900 server. BIOS version: 2.7.0RAID driver: 2.24.0.64, A07The RAID firmware: 6.3.3 - 0002, A-00OpenManage: v7.4, A00 w / patch v7.4.02, A00 In the OpenManage software, under System--> Storage--> PERC 6 / I integrat