my screen has a lot of Flash in black unless I run in safe mode, why?

Similar Questions

• I was not able to get on firefox for weeks! It crashes on opening a few seconds. I reinstalled hoping to be updated, but that has not worked. It will not be open even in safe mode. I'm desperate...

  all of a sudden a few weeks ago, I can't have on firefox. It crashes immediately on startup every time anything and journalist accident happens. I studied all the articles and followed their suggestions. I installed the latest version of firefox and still get the same results. I can't even open firefox in safe mode. I don't ' know what else to try and really need my favorite browser back and all my favorites and passwords...

  Since I exhausted all angles throughout January and early February, I can't really identify what makes the difference, but today... IT WORKS NOW! Firefox has been removed from my computer for a few weeks now, so with renewed determination I searched all single folder on my entire hard drive and found 3 random files with mozilla or any part of the word inside mozilla and erased. I turned off the computer and restarted a few hours later. I downloaded firefox 10 (still higher version than the one I was updating of a month) from google chrome and installed it. so thank you for your comments and help!

• Blue screen at startup - no code error and it does not open in safe mode

  Hello. I have a Sony VAIO (VGN-N130G) which is about 5 years old. I also have a blue screen error at startup. Unfortunately, there is not a code of error/message at all. I tried to start it in Mode safe mode, but it does not work... just blue screen. Is my bread cell phone?

  Hello
   
  
  Method 1.
  If you have a Widows XP installation CD, refer to the article below and check if this helps us start successfully.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545
  
  Method 2.
  If the steps above do not help to solve the question I would ask you to perform a repair of Windows XP installation. See the link below for the procedure.
  Perform a repair Installation
  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Once implemented freezes screen, can get out of gel by Ctrl-alt-delete, starts in safe mode

  I had to do a full system recovery on my computer with Vista. Towards the end of installation screen is frozen on a blue screen which says that it was a single configuration screen and to ignore the messages etc. other than those who might ask you to restart.  This form has remained for more than 1 hour and a half before I dared to think that there might be frozen by pressing Ctrl-alt-delete and then cancel I could get the desktop to appear how I was responsible for approving some updates, more than 90 more.  Half of these updates failed, but future attempts had succeeded re installation. Now everytime I restart the computer, it goes back to the original blue single please wait screen.  I can go out with Ctrl-alt-delete. I also tried Microsoft Fix - It and the sfc/scannow not detected no problems. Any suggestions would be welcome.  Thank you.  Susan

  Hello

  you do not say what was the original problem that caused you to reinstall in the 1st place

  Now your problems started with a blue screen when you use manufacturers recovery process

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• Windows 8 disc locked; It does not start at the home screen, will not auto repair and doesn't give me access to safe mode

  Nightmare; perfectly working windows 7 64-bit configuration I upgraded (stupidly) to Windows 8 (it seems installing a 32-bit version for my troubles). I installed a driver for a having previously worked USB WiFi adapter (that is, it was working fine before the upgrade) and now it does not start. It says "irql less than equal", says his collection of information and restarts to a kind of repair mode, none of the options which work because he complains that the hard drive is locked. Any attempt to start in SafeMode (SHIFT + F8) fails, with mnode security options panel shows ever in service options. Really, a very incomplete piece of software - I should know better than to install version #1 what whatsoever.

  Suggestions for moving forward? No, I don't have a record of victory 8 because I updated my installation of windows 7 perfectly work in updating online.

  Simple repair that has worked for me.

  If you have a windows install disc (if you borrow 1 from a friend)

  run the disk at startup, press on f9 to choose cd rom as boot, press a key when it asks you,

  Let the disc to the refreshment of startup repair section, choose Advanced & go to the command prompt and type.

  Bootrec.exe

  Bootrec/fixmbr

  Bootrec.exe/fixboot

  Bootrec.exe/RebuildBcd

  When all this is over, it will show that your o/s and the reader don't worry if it shows as D instead of C, it is because the system resource use C at this point, it will ask you if you want to add this player to your startup type Y and your good to go, your old win 8 will draw upward as it did before spread the word.

• Screen won't turn on and can run Vista in safe mode on Satellite P series

  Last night, I was working on a slide show with windows movie maker in Vista. I had trouble getting the software to recognize my video files for my camcorder, so I suggested that I try to download codec so that he could play my files... I don't know what I was doing, but he gave a shot.

  Even if the codec didn't work even after the download, I was still able to run my computer normally. This morning I woke up and continued to work on my slide show but my computer wouldn't play my slideshow. All he would do was play music and audio files... Everything seems to be working so I decided to restart it.

  My computer will restart, but now my screen is black. It remains 'functions' I see change different colors of black and gray because it is set to zero... and I can hear all the audio that comes with reset, but I can't get my laptop screen to work.

  I plugged my desktop monitor to my laptop to see if the monitor would work like that and it did for about 30 seconds, then turned off Black too. I then rebooted and press F8 and ran in safe mode with my always-connected desktop monitor. I am able to run in safe mode but not normally reboot. I think I downloaded some viruses with this codec.

  I decided to get the desktop monitor and press F8 just hoping the screen would show up on my laptop... but it still doesn't work. It stays black.

  Now, I'm running in network mode so I can know what to do next. I tried a restore of the system in safe mode, but I think that it only deleted windows updates and not something else. I can't find my toshiba recovery CD because we moved a month ago and it's somewhere in a box...

  So here I am. I work constantly on a slide show for Christmas and can't play or it end before my laptop works again. I also tried a during restart System Restore but I don't know my password of administrator and I tried a couple that I thought that I would have used during installation, but they were not good and so now he me off to run as administrator.

  Can someone tell me what I can do? Thank you very much

  I'm a newbie here, but have you tried...

  1. press F8 (press on and hold, or press repeatedly) while Vista boots, and then select Safe Mode. This should automatically open the account administrator (no password needed) and you can then reset your existing account to the administrator.

  2. simply delete all user accounts permits (including the one you are logged as) without forgetting to let the disabled administrator account. And then disconnect.

  3. use Offline NT Password & Registry Editor to unlock the administrator account or promote another user to the local Administrators group to regain access to your locked Windows Vista PC.

  4. also Vista has a hidden superuser account.

  Just my 2 cents.

  Post edited by: Mddlrthr2

• black screen with cursor, no safe mode, tried everything, need new ideas, please help!

  Windows Vista premium, boots to black screen edition. freezes on crcdisk.sys when you try to start in safe mode. now online and answer all possible solutions, I tried.  many points of view, no response!

  Hello brent383,

  1. don't you make changes to the computer before having this problem?

  Black screen problems are usually caused by display drivers does not not or the material does not.

  You can try the methods below to resolve this issue.

  Method 1:

  Try to start the computer in mode low resolution, as this may be caused if the graphics card is unable to load the drivers.

  a. restart your computer if it is running.

  b. press the F8 key after your computer powers initially.

  c. Once you see the menu Options Advanced, boot you can stop tapping.

  d. use the up/down arrow keys to highlight your selection.

  e. Select the low resolution mode.

  You may need to install the drivers for the graphics card if it works very well in this mode.

  Method 2:

  Because safe mode gets stuck on crcdisk.sys, it seems to me that the problem may be related to the hard drive. I suggest that you run chkdsk on your computer.

  You should try running a Chkdsk on your computer to check if there are bad sectors on the hard disk.

  a. Insert the Windows Vista DVD into the DVD drive, and then restart your computer from the DVD.

  Note: when you receive the press quickly press any key to boot from the CD or DVD, press any key on the keyboard to restart your computer by using the Windows Vista DVD.

  b. Select your language setting, and then click Next.

  c. Select repair your computer.

  d. Select the installation of Windows Vista to be repaired, and then click Next.

  e. under System Recovery Options, select command prompt and type:

  CHKDSK [drive:] [/ p] | [/ r]

  [drive:] Specifies the drive to check.

  / p check even if the drive is not marked dirty, bad.

  /r locates bad sectors and recovers readable information (implies / p).

  WARNING: This could cause loss of data on your computer. It is recommended that you back up all data and files before performing this.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Vista Ultimate black screen with the living mouse, pc will only boot in safe mode, downloaded hotfix kb977675-v2 - x 86, but it will not install in safe mode

  have a ultimate black screen vista under contract with living mouse, pc will only boot in safe mode, downloaded hotfix kb977675-v2 - x 86 but it will not install in safe mode

  have you tried the manager used tasks related to bugs

  Msconfig

  Explorer.exe

  and have had no joy... Please heeeeeeeeeeeelllpppppp

  Hello

  It is the fix in case there are any information it helps.

  A computer that is running Windows Vista or Windows Server 2008 stops responding at a black
  screen early in the startup process
  http://support.Microsoft.com/kb/977675

  Microsoft - contact patch Support issues.
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  ======================

  Other troubleshooting methods that can help.

  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  References to Vista also apply to Windows 7.

  No registration necessary data and re - install Windows 7 might be the best option, but here are a
  few others.

  You can save your files by putting the drive in another computer or an external hard drive enclosure, then
  saving them. Do this using several methods to redundantly. Of course, a real computer
  Shop or the manufacturer of your system can help to recover the files.

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  is CTRL + ALT + DEL and the processes tab find EXPLORER.exe and END PROCESS on it.
  then on the tab Applications - lower right - new task - the type in EXPLORER.exe. Safe mode is
  accessible by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
  base. That there is no information on a black screen as there is just a blue screen
  adds to the difficulty. Often using a restore point or Startup Repair will have no effect.
  You can try a google to see the proposed repairs, whom some have worked however these
  cover a wide field of efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a window 7 disk? You can try restoring the system to it. If you do not have the
  discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
  it.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  You can create a recovery disc or someone else use same version (to do the system restore
  It only needs to be bootable).

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  Try Repair Options recovery or a Windows 7 boot disk system

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  If nothing works, you can do a repair installation.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - do not type)
  parenthesis or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• "On the splash screen, it says can not find script file"c:\windows\run.vbs "and on top of that, my screen is empty

  Original title: computer problem

  "Last night I turned on my computer and the screen starts it sayscannot find script file"c:\windows\run.vbs "and on top of that, my screen is empty. I tried to run in safe mode, but I noticed the same problem. can anyone help

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are getting a message on the start screen.

  I suggest you to refer to the suggestions of ThrashZone replied on January 30, 2016 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/getting-an-error-message-when-turning-the-computer/77eb910c-Bebb-4fc0-bf58-db3ca7b90033

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• HP-DV6-2150US has a lot of white stripes on the screen

  Hello

  My computer laptop DV6-2150US, System: Windows 7 64-bit, has a lot of white on the screen when I turn on it, and when I used it, I need help. I've updated the drivers, but the problem persists.

  Thank you.

  You have a hardware problem, I recommend contact support to get a quote on a repair.

  Then, you can compare that against the price of the purchase of a new laptop computer.

  You can also try to connect an external monitor to see if the problem is seen here, it may be a way, but you wouldn't know until you've tried.

  So a few options for you to think,

• HELP computer laptop has frozen with power on a black screen and flashing lights

  Hi I have HP Pavilion dv 7-3162nr laptop. When I turned it on all the lights have gone but the screen was completely black. To add, the shift lock and numlock began to Flash all 3 secends. I have no idea why my laptop that was, but pls pls HELP all my tests and valuable information on the laptop. I'm dead without him! Thank you!

  Hello

  Try a Hard Reset as follows.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery, connect the AC adapter and see if the laptop boots.

  If the above doesn't help, see if you can match the sequence of "Flashes" to those shown in the table below.

  

  Kind regards

  DP - K

• Half of the Satellite A200 screen has red pixels

  Hello

  I plug in a toshiba Satellite A200 1 years.
  Today, I had a problem with pixels.
  Half of my screen has red pixels.
  A lot of black color becomes red.

  I have no idea on this problem and why it's happening.
  What should I do now?

  I would like to get in touch with my dealer? or is there a solution to this issue?

  Thank you

  Hello

  In my opinion, you should contact the Toshiba ASP.
  Usually after registration for laptop, the guarantee must be valid for 2 years and all part replacements must be covered there warranty.

  My recommendation is; make a call to the ASP and ask for assistance and handling of the Fryer

  Good luck

• Screen has suddenly gone white

  Start machine this morning, works fine for about an hour, and then all of a sudden the screen has disappeared, as if there was a power failure sudden.

  Monitor LED is on (not flashing).

  Card mother LED is red continuously - red (not sparkling).

  No sound or startup beep on reboot.

  I thought that this could be a monitor, but it works fine on another XP machine.

  Does anyone have ideas, which could have caused this?

  Looks like your motherboard is dead. It could be the power supply, but from your description of the symptoms, I doubt it. MS - MVP - Elephant Boy computers - don't panic!

• Errors of diagnosis Vostro 400 problems screen has black 1100:012

  Afternoon, I'll have a nightmere of problems with one of our Vostro 400 workstations. Running Vista Business SP1 and after 4-5 hours, it crashes - goes to a black screen, sometimes with the power light flashes. When I managed to restart the turn table has checking (RAID 1 of Dell). I am running diagnostics extended utility partn. He has so far thrown upward the following errors on the disk SATA test 1100:012 A 1100:022 A 1100:032 A and 1100:042 A.

  Disk with a hot fault or controller issue?

  Covered by the 3 year warranty so I sound Dell once the tests have completed.

  I was just wondering what I'm against here, bit cheesed off because I expect the system to continue, because the RAID 1 configuration is sold.

  TIA.

  Paul

  
  

• My iphone 6 s screen has totally blacked out, but siri works. What is its cause?

  My iphone 6 s screen has totally blacked out, but siri works.  What is its cause?

  Press the sleep/wake and home buttons and keep them for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/