My screen has lost about two inches on each side.

Similar Questions

• After you install the updates, my window screen has lost about 2 1/2-in. horizontal spread. How to return to the full screen size?

  I just installed a series of updates from Microsoft.  When the updates were completed, the screen has been compressed by 2-1/2 inches horizontally.  I don't know how to go back to its original size.

  On Saturday, December 8, 2012 12:48:59 + 0000, MardineCampbell wrote:

  I just installed a series of updates from Microsoft.  When the updates were completed, the screen has been compressed by 2-1/2 inches horizontally.  I don't know how to go back to its original size.

  Right-click on the desktop and choose screen resolution. Assuming that
  you have a LCD monitor, set the resolution on what the manufacturer
  recommend.

  Ken Blake

• have about two inches of blac k screen on each side of the monitor

  I lost my internet connection for several hours, when she came back on I now have about two inches of black on each side of my monitor

  Hello

  see if there is an automatic on screen reset button if you are using a desktop computer

  and you can try one of these methods to fix:

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  or this

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• How can I use Windows 8 to adjust the size of my desk? He 'overflows' the screen about two inches around the perimeter.

  He 'overflows' the screen about two inches around the perimeter. Example: The clock in the bottom right is almost invisible.

  I don't need to change my resolution and cannot do with my monitor. Also, I don't speak of re-sizing the interface, not the wallpaper.
  What kills me is that I did this work before and he doesn't remember how!
  I have the latest drivers for my card AMD (helps nothing in the Catalyst Control Center) and the generic PnP monitor.
  How can I get instead of Windows 8 which allows me to adjust the size of the screen (no icon or text size and no resolution)? Am I crazy, or was it easy to find before?
  Thank you!

  Hello

  This looks like a problem of scale .

  Open the Catalyst Control Center.

  Expand the section My Flat-Panel digital .

  Select the item Properties (digital dish) .

  In the resizing of the Image section, place a check in the option enable GPU scaling .

  Select the image of the scale to the size of the full screen .

  Click Apply/OK.

  Test and let us know the results.

  Concerning

• iPhoto has lost about 3000 pictures

  I need help!

  My iPhoto has lost about 3000 pictures in the web I read something about a corrupt library.

  If I scroll in my pictures, I can see them for a few seconds, and then they disappear! I can't find them in the masters (iPhoto 11) and the iPLM show me entered as missing.tiff of the document with no content.

  Can someone help me?

  Thank you for a booty!

  If I scroll in my pictures, I can see them for a few seconds, and then they disappear! I can't find them in the masters (iPhoto 11) and the iPLM show me entered as missing.tiff of the document with no content.

  What happened, until the photos have disappeared?

  Did you move your library to a different location or restore your iPhoto library? Have you run free cleaning of storage applications?

  Where is stored the iPhoto library?

  If missing photos are no longer in your folder of masters and IPLM missing reports TIFFs, the photos are actually missing.  Is there a 'Old masters' folder in your iPhoto library?

  Try to restore t the library since the last Time Machine backup, you did until the photos have disappeared.

• which method is called when the screen has lost focus but stays on blackberry?

  Hello

  I want to know in which method is called when the screen has lost focus, but always visible BlackBerry?

  For example, a screen is in the foreground and we disply dialog box so that the screen is visible but not to focus, therefore, at this time that methos called when we close this dialog box?

  Please, help me please please

  Override the following methods in your class to screen according to your needs

  1. when the screen button to the stack

  Call

  onDisplay() or

  onUiEngineAttached(boolean attached) - so attached is true then your screen is at the top of the screen

  2. When you are in a backlight and the lcd screen turns off to your state of rest and turns on again when you actively use this form

  call

  onVisibilityChange(boolean visible) - if visible is set to true, then you get the focus when the lcd display turns

  3. when your application moves to the background by clicking the red end button (i.e. without quiting the app, yet yours is active in the background)

  call

  onExposed() - when your application comes to the foreground of the background or during any type of screen that is in the top get popped

  & call

  onObscured() - when your application moves to the background, or when a screen pushed above your current screen more

• I can't get access full screen. I have a border of 2 inches on each side of my screen

  I have a border of 2 inches on each side of my screen. How can I fix this in full screen?

  You may need to change your screen resolution:

  Windows Vista change screen resolution
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Get the best display on your monitor
  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-the-best-display-on-your-monitor

• Home page and a few other Web pages have a vertical bar of 2 inches on each side of the page. How to permanently set set the pages to fill my screen?

  I have a HP - i5 with Win 7 and only use Firefox 35.0.5. Recently, I met some problems with my home page loading with blue text on the left side of my 2-inch screen and put it in the shop. Some viruses are removed and 35.0 FF was installed.

  Now my home page and pages loading with a 2 "empty bookmark bar vertically to each side of the page.

  Can I use zoom in on the view or the - + zoom and zoom to 100% to 133% increase, but this change is never permanent.

  Try to fix the problem I uninstalled FF 35.0 and installed FF 35.0.5 directly on the FF site. I also uninstalled AVG virus protection program. None of this has helped.

  How can I get rid of these vertical bars of 2 inches of empty space at all TIMES?

  I have a HP laptop with a processor AMD, Win 7 and Firefox 35.0.5 and he has never had this problem.

  Firefox should remember your level of zoom on a site-by-site basis. It is not "global browser" as in IE.

  Note: If you zap the history, make sure not to clear the Site preferences.

  If you need to adjust each site by about the same amount, you can use an add-on to set a higher level of the base line of the zoom. For example: Default FullZoom Level.

  Unfortunately, there is no unique zoom level that will work perfectly for all Web sites due to the preferences of individual positioning of their webmasters. But I hope you can find a good middle ground so you need not all zoom each time.

• Full screen has lost the 2nd monitor

  First of all, I use the beta private cs6. Last week, I lost the ability to use the preferences/reading/Video Device / Monitor 2 Adobe. Even when its selected, or one of them, nothing happens. So I don't have a reference of full screen monitor. I've tried trashing preferences, even reinstall with no luck? What gives? I have a CUDA enabled GPU and edit with GPU acceleration. The reference monitor works fine in AE.

  In the use of two monitors, one often extends the monitor in order to cover both screens. It's is no longer maximized but extended. If you want to use the second screen as a monitor in full screen, please make sure that PR is "maximized" at a single screen:

  

  

• After resetting Firefox, LCD screen has lost its sharpness - as there are some missing pixels - WHY?

  I have a PC running Windows 7 Ultimate. Lately when I'm in Firefox (running the most recent version), if I try to open more than one tab, Firefox slows down and I get the message "Mozilla Firefox does not. in a few seconds, regardless of site I try to open in the new tab opens; Firefox just seems to be morose. Finally, I tried to reset Firefox. After I did the reset, I noticed that the images on my screen (Acer LCD S200hl) appear to be less clear, even the wallpaper. As I type this, there seems to be holes in the image on the screen, as if the pixels are missing. Some letters look as if they are not completely filled. The only change is that I have reset Firefox.
  Any help will be appreciated.

  Where there is an incompatibility between Firefox and your graphics driver, try to disable the use of Firefox hardware acceleration. You could have done this once before, but of course, reset turns it back.

  the button Firefox orange (or the Tools menu) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  It will take effect after you exit and then restart Firefox. Any difference?

• My screen has a black margin of about an inch on each side

  How can I change or no this margin not every side?

  Change the screen resolution:

  1. right click on your desktop
  2. click on properties
  3. click on the settings tab
  4. According to the resolution of the screen, drag the slider to the correct resolution
  5. then click on apply. If the setting is correct check the change, if not try another resolution.

• There is a dead space about two inches of height all the way across the top third of my page. I can't click on anything in this space.

  This area dead, my cursor will move the arrow to a finger, so I can click on the orders. If I try to click in any case diminishes my page. It works perfectly on the rest of the page, but not in this area. It's that way on every single site. Internet Explorer works fine, but I don't like Internet Explorer. I ran all the updates. I'd appreciate that solve you that problem, so that I can continue my use of your browser.

  The top of the Firefox window is unresponsive, inadmissible toolbars - see also the problematic extensions

  • caused by the toolbar Yahoo- https://support.mozilla.com/questions/890908
  • caused by Babylon Toolbar - https://support.mozilla.com/questions/890670

• How to make Web pages to fill the screen. I have margins of three inches on each side.

  When I open a page with IE, I get a view full screen of a web page. When I open a page with firefox, it is a smaller with the fine print version and margins of the great 3 inches. This is a new computer with Windows 7. I did not have this problem with Firefox on my old computer with XP. I currently have Firefox 3.6.16.

  Firefox is not zoom the pages automatically to fill the screen.

  You can watch one of the following extensions:

  • Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
  • NoSquint - https://addons.mozilla.org/firefox/addon/2592

• My laptop screen has turned, everything is now on the side...

  I turned the laptop off last night and it suddenly changed to this, and it's always like it this morning.

  What should I do?

  Hello

  Right-click on an empty area of the desktop - graphics Options - Rotation

  CTRL + ALT + arrow key it also runs.

  CTRL + Alt + (up arrow), Ctrl + Alt + arrow (pointing down), Ctrl + Alt + arrow (left) and also Ctrl + Alt + arrow (right)

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Bought a new monitor LED about 20 inches. Front of the monitor indicates the compatibility of windows 7. I use Windows XP

  I want my desktop display to fill the screen of 20 inches, but she has a couple of inches on each side and so the desktop displays the previous screen on the new larger screen size.

  I tried to set display and all the other things I might be aware of.  It's over my pay grade.

  Can someone help me?

  Mary Ann

  Monitior should work fine with XP and Windows 7 (all 3 of my friends do).

  (1) check if your monitor has a function/button "detect / Auto setting.

  (2) verify that the graphics display card for appropriate settings (resolution and frequency).

  J W Stuart: http://www.pagestart.com