My screen on my laptop an Acer is mirror imaged.
Original title: Mirror image screen.
My screen on my laptop an acer is mirror imaged including the bios, when I connect it to a monitor everything is ok anyone able to help
As you mentioned that the problem that happens in the system BIOS (Basic Input Output System), then it is probably a BIOS setting or a hardware problem.
I advise you to contact Acer for warranty support.
Hope the helps of information.
Any suggestions on how to clean the screen of my laptop Trubrite? He had a lot of ideas in the web, but none of them were convincing enough?
For my LCD to computer, I bought liquid cleaning screen and I use it with a non fluffy cloth.
It s a perfect ;) combination
So yesterday while I was working on a programming assignment and a document, the screen of my laptop froze for several seconds (about a minute) before stopping. I'm not taking breaks from the laptop for several hours (3-4 I think) and I was wondering what to do to solve this problem. I don't want to have to send it in my laptop for repair because I just bought after Christmas last year and it received during the first week of January.
Welcome to Lenovo Community!
According to the request, we understand that you are facing problems with the system freezes.
Please try to perform the supply line by removing the external devices connected to the system, shut down the system and remove the battery, also disconnect the adapter. Now, press on and press and hold power for 30 seconds and connect the battery and the adapter and try turning on the system.
Also try to connect to sockets different and check if the system powers on.
Try also with different adapter and different batteries if possible. As you mentioned that the system stops is the system hot and close.
I hope this helps. Post back if the problem persists!
I don't wan turn on laptop screen and my external monitor at the same time. So is it possible to do automatic screen of my laptop to turn off as soon as I plug my external monitor to my laptop vga cable (without pressing Fn + F2 keys)?
Please help me.
I don't know if it's possible, but you could try to go into display settings and set an external because it is main if possible display and then disable the laptop with Fn + F2 but idk if it will remain inactive if you portable computer power, then on again :/
Update: how to do this, right-click on the screen area and select the screen resolution while having the connected external display then of you will find a drop down a 3rd or a 4th do not remember but inside, you'll find stuff like show desktop on the screen 1 or 2 to find out what your external display screen number is and apply it to this form then computer laptop screen should turn black as it is turned off and you will see desktop area is on external display so I hope that this has resolved your request.
PS don't forget to press Bravo if it helped
How can I reflip my screen on my laptop
Would be preferable to have invited in the Windows Forums for your version of Windows.
In the menu at the top of the page (just below the answers on the top left Logo - click on Windows.
Right-click on an empty area of the desktop - graphics Options - Rotation
CTRL + ALT + arrow key it also runs.
CTRL + Alt + (up arrow), Ctrl + Alt + arrow (pointing down), Ctrl + Alt + arrow (left) and also Ctrl + Alt + arrow (right)
I hope this helps.
Remember - this is a public forum so never post private
- Why I get a blue screen on my laptop and then rebootingPrograms with the fact that you have problems
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
§ What is the exact error message that you encounter the blue screen?
§ East - this happen randomly or whenever you access any program on the system?
§ Remember to make changes to the system?
§ Since when are you facing this issue?
Give details, so that we can help you in a better way.
I suggest you disable automatically restart the system and check the exact error you encounter in the blue screen and let us know. Follow the steps mentioned below to disable the auto reboot.
a. right click on my computer and then click Properties.
b. click on the Advanced tab.
c. under Startup and recovery, click settings to open the startup and recovery dialog box.
d. clear the checkbox automatically, restart and then click OK, the number of times required.
e. restart your computer so that the settings take effect.
In safe mode, check if the problem persists. Follow the steps mentioned below.
a. restart the system and then keep tapping F8 until you reach the start menu.
b. Select safe mode from the list and press ENTER.
If the problem persists then in safe mode, I suggest you to do a clean boot. Follow step 2.
Follow the steps mentioned in the article below.
How to configure Windows XP to start in a "clean boot" State
I suggest update you the drivers on the system for the graphics card, etc. on the sound card system and check if the problem is resolved. I suggest update you also the drivers from the chipset on the system and check.
Thanks and regards.
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think.
my screen on my laptop has just changed to huge, can someone tell me howto reduce it please
Open Control Panel, and then the display icon and check the resolution of the display on the settings tab.
could someone please help me turn my computer again it is the problem:
Blue screen on my laptop which is runningWindowsXP the window connection process termiated unexpectly with status OxC00000135(0x00000000 0x00000000) this system was stopped (I have windows xp)
Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?
The following link has information about the use of Windows Live SkyDrive:
Windows XP op een laptop WZC doing 871122 "ncpa.cpl en run jullie werken niet op laptop of (Acer aspire 320) wat you doen?"
puts goede groet
Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:
my screen on my laptop is dark can not do the letter just dark peak
You may have a faulty backlight.
If this is the case and you are under warranty, contact the manufacturer.
If it is not under warranty, contact a repair shop, local.
See you soon.
Hi all hope someone can help me here.
I have a laptop with a broken screen I get the start to the high view until happens start in SafeMode with networking etc. or start normally everything is ok it doesn't matter if I click Start in safe mode or normally happen at a screen black flashing several times all first please can someone help I just want to check that everything is ok before we get a new screen for this laptop.
However I was going to find the computer and I put in my windows ultimate cd and all the colors and options came, but he told me that I had to wipe the computer first wil a right recovery cd so if I don't!
· The question started after the screen was broken?
Step 1: I suggest you to connect an external monitor and see if the problem still occurs.
Step 2: Disconnect any external devices (printers, scanner, USB (universal serial bus) drives, etc...) Except the keyboard and mouse) and then start.
How to lighten the screen on my laptop? It's waaay to obscurity and the only time where it is bright enough is when I plug in the power cord. I have Windows Vista.
1. What is the make and model of your laptop?
2. when the problem started?
3. you remember recent changes to the computer?
You can try to hold down the function key (FN) on the laptop and press the arrow key UP while you are on the farm, he must try to change the brightness. You can also get in touch with the manufacturer of the system and check.
Hope this information is helpful
I'm trying to figure out how to display the screen of my laptop via a projector and also be able to see the screen of my laptop. When I hit the function key for display on the big screen, my laptop darkens. I found a post on this forum on the connection of additional views or projector (Set Up Multiple displays). When I go to Mobile PC and display to choose settings listed in the answer (mirrored, extended, etc.) aren't there. My laptop is running Vista Business Service Pack 2 and two weeks. Thanks for any help you can provide.
Thanks for posting on the Community Forums of Microsoft Vista.
It should probably be shortened on your laptop keyboard to turn on the visible screen (for example Fn + F5). Try these until you can see the image on the laptop monitor.
Also, follow the steps and try to set the screen parameter as follows:
(1) right click on the desktop, click Properties, and on the display settings, choose monitor as your main graphics card 1.
(2) setup that monitor the as a 2nd external display (projector).
(3) click on apply and Ok.
Restart the computer to see if you are able to see the screen on laptop and projector.
You can also check with the computer manufacturer to check if they have additional parameters to be changed.
It will be useful.
Thank you and best regards,
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
I have a HP Pavilion DV9500 and the graphics card has bust sense there is absolutely no display on the screen. I took the various shops and paid huge sums of money to get it fixed, but it never lasted longer than 5 minutes, so I'm givig upward with it. As I assume that the hard drive is still very well (with my itunes library on!) I want to try to connect the laptop to my home PC screen. I made the right connection I think but there is no sign of something different at all. I pressed the function and the F4 key on the laptop, but obiously the screen is blank, I don't know what is happening, and it doesn't seem to be something! I can't find anything on the PC at home that it would be useful either! I'm completely dense when it comes to this sort of thing, so please use leymans terms to help me if you can. Thank you!
Do you want to connect the laptop as a monitor for PC (which display bust!)?
You cannot connect a cable to your laptop and I act like a computer laptop coz of monitor do not have VGA inputs for attaching an external source.
But you could use something like VNC to open the Office from your laptop. What you do on the desktop will be mirrored via VNC on the screen of the laptop. You can also use remote desktop to go into the desktop from the laptop pc, but you will need to work on the laptop computer. (from another forum)
A new icon has appeared on the screen of my laptop. It is a form of small black box. Within this form is the white outline of what looks like the WIFI symbol... a little White House. There is a white line through it. Also in the middle of the small outline White House is also the number 1. What does that mean? Can you help me please?
To allow someone to maybe help you, you can take a screenshot of the icon and post it here?
When you create / reply to a post, it is the small icon that looks like a as:
You can capture the image with a screenshot or of the cutting tool. We just need to see the icon itself.
Maybe you are looking for
Hi all, I know that I can select cell formatting of the text and to capitalize the first letter of each word, but I would like to select a large number of cells and to capitalize the first letter of the text, but when I select multiple cells is greye
the sign comes up to retry, cancel or put my password. Unable to get on. I had received a notice from google this am that someone tried to enter my google account and so I changed my password. So I changed that, which reflect and cause problems for m
This happened sometime yesterday / the day before.I installed updates, the computer will, left and then finally stopped.When I turned it on the next day, as the login screen popped up, then not many mistakes, all saying that "Users/Microsoft" or "C:/
I recently acquired a tower from a friend who said that they had problems with the original vista, it came w / so he used the restoration of the system to the format & reinstall. Everything about it seems to work fine except that now when I try to in
Hi, I would like to use 2012 MDT to deploy Windows XP on our workstations. I recently started this new job and our deployment server is dead. The system was not subject to return so I'll have to re - build the server from scratch. Fortunately the pre