my screen on my laptop in the dark

Similar Questions

• How do I turn on the key board lights to use my laptop in the dark?

  I want to use my laptop in the dark. So I turn the keys of my keyboard to make it easier to type.

  If your laptop keyboard has lights, then they will be controlled by a utility provided by the manufacturer of laptop - it is not part of Windows 7.

  If you no longer have the manual of the laptop you can probably go to the manufacturer's support site to download a copy.

• INCH BLACK LINES DOWN THE SIDES OF THE SCREEN OF MY LAPTOP SINCE THE INSTALLATION OF WINDOWS 7 NEED HELP... PLEASE

  Ive just installed windows 7 on my copy of vista 64-bit. the thing is tho now my office is not whole screen on my hp laptop. It was fine with vista, but I am new to windows 7 and do not know what to change. Ive got two black line on both sides of my screen about an inch in size. HELP PLEASE

  Right click anywhere on the blank desktop (not on an icon), and then select the screen resolution.

  Under the box with the image of the screen the middle button label resolution with a value in the button X y. click on the arrow and is the slider at the top? The highest option "recommended" on this subject.

  If the second answer is, the graphics card no doubt is not installed properly and needs a update driver because he did not interview the screen to get his abilities properly.

  If this is the recommended option resolution corresponds to what you believe the display is capable of. Slide this setting and select apply and see if the black bars and the image fills the screen.

  An LCD has a fixed number of pixels wide and high, and has a specific ratio. The standard reports are 4:3, 16:9 or 16:10. With black bars or the other side, it is very likely, the screen is a ratio of 16:9, but the graphical output is 4:3. Some stretch to fit other screens the black bands.

  Any setting other than the good for the screen will produce a soft image with a loss of sharpness.

• How to clean the screen of my laptop Trubrite?

  Any suggestions on how to clean the screen of my laptop Trubrite? He had a lot of ideas in the web, but none of them were convincing enough?

  For my LCD to computer, I bought liquid cleaning screen and I use it with a non fluffy cloth.
  It s a perfect ;) combination

• Satellite L300-PSLB8E - screen becomes all white and the laptop freezes

  Hello

  I have a Toshiba Satellite L300 PSLB8E. I initially bought with Windows Vista already installed on it. After a few years, I changed the operating system Windows 7 Ultimate. I installed the display and all the other necessary drivers (that is, sound, network, etc.).

  After I installed Windows 7, when I use the laptop for a while, the screen becomes all white and the laptop hangs. This happens spontaneously. Sometimes, in less than 10 minutes and other times that it can work perfectly for hours. I checked for loose batteries and other components, but everything seems fine.

  Physical damage only that there is a tiny crack on the screen in the bottom right of the screen. The operating system is not good? If I put windows Vista back as it was?

  Please advise and help understand me what the problem is with the laptop.

  Until we start discussion can you tell me what you do when this happen?
  Hard stop and restart?
  Is everything OK again when you do?

  It is not easy to say what exactly is the problem, but I put t think there is problem with OS and preinstalled display driver. A long time ago I installed Win7 Home Premium on friends L300 and it works perfectly.

  What you can try is to use the external monitor for a while and see if everything works well. If so, there is no problem with the operating system, drivers or graphics card. It may be that the display problem.

• I just want to know how to reduce the size of my screen on my laptop its huge party

  my screen on my laptop has just changed to huge, can someone tell me howto reduce it please

  Open Control Panel, and then the display icon and check the resolution of the display on the settings tab.

• : Blue screen on my laptop which is runningWindowsXP the connection of the process window termiated unexpectly having the status of this system was arrested (I have windows xp)

  could someone please help me turn my computer again it is the problem:

  Blue screen on my laptop which is runningWindowsXP the window connection process termiated unexpectly with status OxC00000135(0x00000000 0x00000000) this system was stopped (I have windows xp)

  Hello

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  LC

• Last night, my laptop that runs windows xp blue screened and says something about the queue

  original title: help solve a mistake, please on windows xp

  Last night my laptop that runs windows xp blue screened and says something about the queue and to bring the computer out of which I did. I just tried to turn it on an hour ago, I use it now, and I got a message saying he had recovered from a serious error and I wanted to report to microsoft? I clicked Yes, but unbeknownst to me, I had no internet connection at the point of having to re-enter my our Verizon router WEP number in this laptop. I essentially self-taught myself much on computers that tell you, I'm not really computer literate, but if you can point me in the right direction, I can very well do. This is where to ask my question/problem. I went in the event viewer and found this error/explanation: Index information is corrupt and Indexing Service cannot re - index the content automatically. User action: stop and restart the indexing service using the following command:

  SC stop cisvc

  SC start cisvc

  Can someone tell me please how to do this?  I think I know, but I'm really not sure so please help... Thank you

  It really seems to me as if you had a temporary problem which has now disappeared and that you probably do not need to do anything.

  However, please click Start, and then click Printers and faxes and report what, if anything, you see in the window that opens.

  If you don't see an icon for the printer that you think should be there, you need to fix this.  On the other hand, if your printer icon is there - or if you do not have a printer attached to your computer - you need not do anything.

  If you want your computer to be a little faster and at the same time save space on your hard drive, read the LifeHacker article I linked in my previous post.  However, you need not to do, and you can erase [probably] regardless of the index corruption has occurred by starting and stopping the Indexing Service (cisvc) by entering commands in a command prompt window that I described.

  Yet once, you don't need to change your encryption WEP to WPA or WPA2 wifi, but doing so will make your network more secure wireless.  If you want to change your encryption, you would start by changing the configuration of your router from Verizon.  You should be able to find detailed instructions on the Verizon support site.  I don't know if you have Verizon FiOS or Verizon DSL service; This is a page of relevant support FiOS--> http://www22.verizon.com/ResidentialHelp/FiOSInternet/Networking/Setup/Security/124980.htm

• How can I fix my screen to where I can't turn my laptop on the side to display correctly?

  Instead my Start button in the lower left corner of my screen its in the lower right corner. Is the only way I can see my screen correctly if I my laptop on the side ob.

  Press Ctrl & Alt keys and use the arrows to rotate back.

• My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  Hello

  I'm sorry to say this, but it points to a UPS of material about to fail.

  You will need to bring the laptop to get it replaced.

  Slan go foill, Paul

• Somehow my laptop screen started to display on the side... and I can't find the setting to fix it.

  original title: sort (my cat must have stepped on the keyboard) the screen of my laptop started to display on the side... and I can't find the setting to fix it. Help. Please,

  I have an old Toshiba (my other laptop is getting repair) is not my usual computer. I looked in the control panel and couldn't find an obvious place to change the settings, but it of really hard to pick up because at the top on the mouse pad is left on the screen and down is right and so on and so forth.

  I have an old Toshiba (my other laptop is getting repair) is not my usual computer. I looked in the control panel and couldn't find an obvious place to change the settings, but it of really hard to pick up because at the top on the mouse pad is left on the screen and down is right and so on and so forth.

  My screen sideway...

  Method 1:

  Press and HOLD on Ctrl + Alt keys > use the arrow keys (up, down, left, right) to realign the screen

  
  Second method:

  Right-click on the free space of the desktop > graphics > Rotation > try different degrees. Start by 90 degrees.

   

  Method 3:

  Do a system restore. Pick a date when the screen is in the normal position.

• the screen of my laptop is broken and it does not start with a monitor

  Hi all hope someone can help me here.

  I have a laptop with a broken screen I get the start to the high view until happens start in SafeMode with networking etc. or start normally everything is ok it doesn't matter if I click Start in safe mode or normally happen at a screen black flashing several times all first please can someone help I just want to check that everything is ok before we get a new screen for this laptop.

  However I was going to find the computer and I put in my windows ultimate cd and all the colors and options came, but he told me that I had to wipe the computer first wil a right recovery cd so if I don't!

  Hello

  ·          The question started after the screen was broken?

  Step 1: I suggest you to connect an external monitor and see if the problem still occurs.

  Step 2: Disconnect any external devices (printers, scanner, USB (universal serial bus) drives, etc...) Except the keyboard and mouse) and then start.

• How to lighten the screen on my laptop?

  How to lighten the screen on my laptop? It's waaay to obscurity and the only time where it is bright enough is when I plug in the power cord. I have Windows Vista.

  Hi AdrianeJackson,

  1. What is the make and model of your laptop?

  2. when the problem started?

  3. you remember recent changes to the computer?

  You can try to hold down the function key (FN) on the laptop and press the arrow key UP while you are on the farm, he must try to change the brightness. You can also get in touch with the manufacturer of the system and check.

  Hope this information is helpful

• Whenever I turn on my laptop, a Dial-up "connection" window appears in the middle of my screen asking me to "select the server you want to connect.

  Original title: Dial-up connection

  Whenever I turn on my laptop, a Dial-up "connection" window appears in the middle of my screen asking me to "select the server you want to connect," even if I'm already connected to the Internet...  How can I get rid of the popup window?  All my updates are installed.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Search for the issue in the clean boot state.
  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the procedure described in step 1 in the section below to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

• The screen on my laptop has changed from vertical to horizonial. How do I turn vertically so I don't have to turn the laptop next to display.

  When I use my laptop now I turn the laptop on the right to read.  I just need to know how to rotate the screen back.

  Hello

  Try to press Ctrl + Alt + up ARROW, or try Ctrl + Alt + and a different key to the arrow.

  If this does not work: right-click on empty office rotation - graphics options.