My screen resolution continues to change itself whenever I connect to my computer.

Similar Questions

• Screen resolution continues to change

  For the past few days Vista continues to change my screen resolution of 800 x 600 at startup, logon, to wake up or screen saver.  Normal resolution for my monitor is 1680 by 1050.  There are a few reboots to recover Vista decision, that I need a 800 by 600 screen.

  I downloaded and installed the latest nvidia driver for my card.  Problem persists.
  I spent my primary monitor with an old crt monitor.  Problem persists.
  I had the video card with another.  Problem persists.
  I looked in the device to a second monitor or a default monitor Manager.  There is no such animal.  It shows a monitor and map suitable and the pilot.  I checked the system startup to ensure that the basic video option has not been verified.

  Everything in searching for a reason for my resolution to 800 by 600 is under personalization > display settings.  It shows two options of the monitor.  The correct 1. HP w2007 LCD Monitor wide on NVIDIA GeForce 8500 GT at 1680 by 1050.  It also shows the 2. (By default the monitor) on NVIDIA GeForce 8500 GT with all of the resolution to 800 x 600.  The true monitor is defined as main display not non-existent default monitor.

  This second option will not appear under the NVIDIA Control Panel for the properties of the card or in the Device Manager, but for some reason any, whenever a connection is required the display switches to 800 by 600.

  Watch Google search that I'm not the only one with this problem, but none of the suggestions worked.  There is no dish scaling option in Nvidia Control Panel.  Switching video cards not disable TMM has not solved the problem.

  I am at a loss, any suggestions?

  It was right on the money.  Restarting the services one at the time and reconsignation in I took the problem to an .avi Divx for Windows Media Player codec.

  Good stuff, thanks for the help.

• Satellite A300-07 - screen resolution continue to change right away after stopping

  My laptop Toshiba Satellite A300-07 has only 9 days. When I put the computer laptop, all loaded all software that comes automatically. In the last 5 days or more, whenever I stop my laptop turned on then again once, settings on the desktop keeps on going up to high resolution.

  I tried to change the display settings, but due to the huge police, I see even the bottom of the page click on apply or Ok, page opens up to what low resolution setting to high. Only and the page will not go up or down - cannot minimize yet to see the bottom click on. For some reason, last night, after I created the system recovery disk, it is back to normal.

  Today, he will not be back to normal at all and can practically use as everything is in hugeeeeee characters.

  I have not downloaded (except for msn and yahoo messengers) any software, but what it comes with it that even when autoloaded.

  Can someone help me how to fix it?

  Try:

  Update the display driver and the BIOS on the Toshiba site.
  Remove any software and the drivers who might be in conflict with the display, for example Dynadock drivers or similar.
  Back up your data and perform the recovery.

  If it happens again on a new installation of Windows, then its likely to be a hardware problem (the graphics card for example).

• Screen resolution continues to change by its self.

  I have a Dell Inspiron 6400 with NVIDIA. When I start my laptop a pop said that the Starforce driver is blocked. Then when I connect to the internet my screen goes 8-bit and a pop-up warns my color depth to be over 298. I then put it to 38-bit and my resolution to 1024 x 768. When I finally have an internet screen, if I open a new tab it back to 8 bits. When I turned my computer off and restart I have to go through it all over again. I'm totally lost, as I have tried everything I can think of. Please if anyone knows what may be a problem, I'd be happy and sane. Thank you

  Hello

  
  Method 1: Update the display drivers and check if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  
  Method 2: Put the computer to boot and see if the problem occurs.
  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  
  Note: Follow step 7 to reset the computer to start as usual after the boot process.
  
  http://support.Microsoft.com/kb/929135
  
  Hope this information helps.
   

• G70 screen resolution will not change

  HP G70 - 257CL running Windows Vista Home Premium SP2

  Mobile Intel 4 Series Express Chipset Family

  Have this second hand with a broken screen. Until I could get a new screen, I used the HARD drive in another notebook successfully. Now reinstalled in the G70, have everything works fine except the screen resolution.

  Reports adapter Device Manager works correctly. I uninstalled and reinstalled, updated the drivers. But no matter what resolution to choose for the screen, it remains the same.  I've currently set to 1440 X 900, 32-bit color, refresh rate of 60 Hz. But what I get is closer to 800 X 600. And it stays that way, no matter what I put it to.

  To the best of my knowledge, I uninstalled all drivers associated with the other laptop, so there should not be anything interfere. Thanks for any help, that all the world can offer.

  Hi Barnaby,.

  It doesn't sound like an exorcism is necessary. From all I have seen and know the computers that he shouldn't do that. Before you call the Ghostbusters or a priest try connecting an external monitor to see if you have the same problems.

  http://support.HP.com/us-en/document/c01938980

  Thank you

• Page layout continues to change according to the configuration of the computer

  I created a very simple webpage beginner with a simple spry menu bar.  It works fine, but when I open the page on a screen larger than the standard, it continues to change my layout.  My menu bar Spry on my screen is 4 columns.  When my CFO opens to her, she pushes the last column under the first.  Is it possible to lock columns so that this does not happen?

  Ok. Change all that:

  To do this:

  And you should be good to go.

  Nancy O.

• Windows 7 has changed after the Automatic Updates - screen resolution may not change back

  Last night was automatic updates from Microsoft.  Today, the resolution of the screen and the icons are huge.   Tried to change the resolution of the screen through Control Panel but can not find the same as before.  I tried to adjust the zoom level on Chrome but now everything is long and lean.

  Tried to do a system restore, but it has a red x next to it and will let me not turn it on.  How to restore my resolution wallpapers and icons to their previous size etc?

  Completely, remove the current (or software) driver and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• Pavilion 17-e176nr resolution continues to change

  The resolution keeps changing on my new laptop pavillion and when I type some letters do not hit.

  Pavilion 17-E176NR.  When you are working, suddenly the resolution changes

  Hi Songbird123,

  I suggest you then call HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thank you.

• # 4 0219 continues to change itself to #4B161F without doing me anything.

  Here's what's happening on my end.  When I opened the file and the pipette a certain color is #4B161F. I immediately change that color at 0219 # 4 because it's hexadecimal code, the customer needs. As soon as I change, I eyedropper again to make sure that I changed it. It reads still 0219 # 4. Perfect. I save the color chart to make sure that this does not happen. I have check the color of the sample. Still # 4 0219. Awesome. THEN, just to be ABSOLUTELY SURE of the color is good, I have the actual color pipette once more. And she came back to the #4B161F. I check my swatch. It is #4B161F. All this in the space of 30 seconds.

  Then I go to treat again: start by #4B161F, which is false. I have replace it with color required of the client, 0219 # 4. I check with the pipette. It is very good. Pipette again do SUPER- sure.  He himself changed to #4B161F, without having me ANYTHING done except the pipette once second. No lie; no change, moving, even switching tools. It just goes back to this color on a second control.

  I had someone else sit and pipette-check as well and even try to fix it. It does the same thing; He returned to the origin 4B161F # almost immediately.

  This only happens in CMYK mode. I had someone else to sit and try to change the hex values for good in RGB mode and values actually stayed on.  Here's another weird thing. The hexadecimal value has changed, but the percantages of each color (C, M, Y and K) are always the same up to a tenth of a percentage. C = 37.37, M = 96.22, Y = 79.76, K = 58.83 for both #4B161F and # 4 0219.

  
  
  This occurs for each color used in the file (it's a logo design).  Each hexadecimal code is just a little next door and always "returns" itself to the wrong color after correction.
  
  
  Any help or suggestions are appreciated.

  helloeien,

  You can only obtain and keep the hex colors in RGB color Mode. Basically, the hex colors are RGB colors, only with names hexagonal.

  The reason is that when you are in CMYK color Mode, RGB colors are changed to the closest match (CMYK) color of the range as soon as blink you.

  Try to stop flashing.

  If you're lucky, changes do not themselves produce/get apparent before doing something else, like deselection/reselection, economy/reopening, etc..

  In any case, they are inevitable, just waiting to jump on you as soon as you relax.

  Actually, you get the corresponding color changes when you use colors CMYK in RGB color Mode.

  You need to work in the correct color Mode, or suffer the consequences. This means you may have to choose between incorrect colors RGB/hex or incorrect colors CMYK. The decision depends on who is the worst.

  If your work is for both print and web or similar use, you can work in CMYK mode to get that as correct as possible and then make a special version of RGB with corrected RGB colors. in the second case, CMYK color changes are essential in all cases

• my screen resolution won, t change. _

  the only option is to 640 x 480

  You need to know what your video card is

  Right click on my computer/properties/hardware/Manager

  Click on the + sign to the video card
  This will tell you what it is.  nVidia etc.

  Then, go to the manufacturese site to find drivers for it.

  Post back if you need help more after that you will find the details of your video card.

  PS
  There is a yellow splatte to the video card?

  .

• Security setting Internet properties continues to change on its own / CPU of the computer goes Haywire / 15 + Instances of dllhost.exe * 32 Com substitutes

  I have seen that this is a problem for more than just me by reading online about this.

  See:

  http://www.bleepingcomputer.com/forums/t/554044/slow-Internet-IE-security-settings-keep-changing/

  http://community.Norton.com/forums/trojanpoweliks-multiple-dllhostexe-32-processes-and-PowerShell-Windows-7

  I need the solution and you can't find it.

  Most of the places online say download all these other programs but never say what is really happening.

  I hope you guys can help.

  Windows 7 Home Premium PC

  THAT IS TO SAY 11

  I did add something new to my pc.  It started randomly happening...

  What I've noticed, is my computer will be stronger, as it is to wrap upward and the CPU goes crazy.

  After that research around these things, I noticed happen when this noise starts and the CPU going nuts:

  -Under Internet Security my settings changed on their own to custom

  (I then change them back only to have this all happen again minutes later)

  -When this is happening and I'm going under dllhost.exe Task Manager suddenly over 15 years * 32 Com alternatives pop up all at the same time

  I do stop by changing my Internet Security properties to default and putting an end to the tree of processes all the dllhost.exe * 32 Com substitutes.

  Then, about 5 or 10 minutes later it happens again. This has happened in recent days.  I ran safely scan and it found some VirToolWin32 - CeeInject.gen! KK (linked in Adobe Updater). This VirTool:MSIL/injector.BF has been removed but all that I mentioned above is still ongoing.

  I have apprecitate your answer. Thank you

  It arrived today.  I checked the updates as soon as I logged in and it was so maybe that fixed the issue.

  Update definition for Microsoft Security Essentials - KB2310138 (definition of 1.187.1412.0)

  I'll keep the links you posted and use them to check everything. I am running the Microsoft Safety Scanner again now, I ran it yesterday and he did not find anything.

  Another weird thing, all my update history disappeared. It says updated, ever. Now it only shows the update one alone that I did when I opened a session today.

• My all-in-one HP 4215 reinstalls itself whenever I turn on my computer.

  When I turn on my computer, my all-in-one HP 4215 re - installs itself.  He doesn't it when starting the development computer into hibernation.  My computer is a laptop e-Machine, the system is Windows XP.  This re-installation took place since I installed a tax preparation, TaxCut program, last year.  I uninstalled the tax software.  Also, I uninstalled the HP4215 and re-installed.  Still have the same problem.  Is this a problem of printer or a problem of Windows XP?  Thanks a lot for your help.

  Well, I had a problem unconnected with my HP 4215 reinstall itself which, ultimately, solved my initial problem.

  I wanted to scan a picture and never had the opportunity to use the feature to analysis of my 4215-All-in-one.  But it would not scan.  Error message says that the device is not connected.

  So I went to the HP support for scanners where I downloaded a Diagnostic Utility Scan who told me that I had problems to scan.  No surprise.

  He then reported that I have download full software functionality that I did.  Spent most of the afternoon working on this.  But after having uninstalled my current 4215 software and installed the current full feature software, my original problem reinstalling everytime I turned on my computer was gone!   And then I was able to scan my photo too.

  I am SO relieved!  Thank you for your help and your entry.  It's SO nice to be able to turn on my computer without having to "wait" while it re - install my printer software.  I am very happy!!!

  Jan

• continues to fall sharply the internet connection for the computer but the xbox is not yet

  If the computer is on and I walk for an hour or two, when I come back, the internet connection went only to the computer.

  Xbox live still works fine.  So, I have to unplug the router, then plug back in and then try again to connect.  Usually it works fine then.

  But he's so old when you do this several times a day. Help!.  Does anyone know what is the problem?  I don't know what else to try.

  Thank you!

  As you mentioned that your XBOX works perfectly well and you face the problem only on your computer, this means that your Linksys also works very well, it has something to do with the computer itself. Also after some time you made the day before computers and when you resume your computer, that in view of the time, you dosent computer to communicate with your router and that is why you are not able to go online from your computer.

  Here are a few parameters that you can try on your computer, I think that might solve the problem...

  Win XP: Click the Start button > go to RUN > type in "ncpa.cpl" - hit OK > right-click on icon "' connection to the Local network'" and select properties-here click on "Set" jaspal-click on a button on the "Advanced" tab-In 'property' box, point, highlight link speed and duplex/network/type or Media type connection - and here (network connections)
  the 'Value' box select 10 MB/s half duplex / 10 half mode base T/10 basic and click OK.

  Vista: Click the Start button > Panel > network and Sharing Center-click view the status of the Local Area Connection - click on continue click on the properties below-click on a button on the button Configure click on the tab 'Advanced' - in the area of 'Property' highlight link speed and duplex/connection network/type or type of media - and in the 'value' box select 10 MB/s half duplex / 10 half mode base T/10 basic and click on OK.

  If it dosent always works, so I think you need to update the drivers for your NIC, once you update, it will not solve the problem.

• Profile of blackBerry Smartphones Sound changes when loading or connected to the computer

  I immediately noticed on my BB Curve when it is plugged into the charger or hooked up to my computer, which changes the sound profile. It's frustrating because I don't know what is happening because this isn't my normal sound profile.

  Is this a bug? If anyone else has noticed this?

  Is there a setting somewhere that I missed that causes this happens on my phone? It's my third BB and the first time it happened to me.

  Thanks in advance for your answers.

  I was going to suggest to try first, maybe they have an option to fix it properly but which could stop him doing what's done

• I downloaded Firefox 4.0, but there is no click a button 'install' and I keep getting the prompt to download whenever I connect to my computer.

  After clicking on the download button, the download box comes and asks if I want to save or cancel. I click on save and nothing happens I can say. I don't get anything that says click on for the installation of the upgrade to 4.0. This happens everytime I try to upgrade. What can I do to upgrade to 4.0?

  After you save the file called probably "Firefox Setup 4.0.1.exe", you will need to run it to install Firefox 4.

  If you do not erase the downloads from the Download Manager, you can run the installer from the Download Manager. Open the Download Manager, then right-click on the Firefox installation file and select open. As soon as you start to run the installation file, close Firefox. You must do this so that the installer can replace the files in the Firefox installation directory.