My services have expired after update does not to my new payment info after a month, I updated my info, and it isn't to do something different. Always playing up to have expired. Now any time I try to check on my payment information and update to ensure t

Similar Questions

• HP Pavilion dv7 Notebook PC: I played games on computer until now, every time I try it says bravely error.

  My computer has Wild Tangent Games.I have never had problems playing games until a recent date. For some reason any everytime I try to load one of the games now it says error Gameplay contact customer service I did. Wild Tangent customer support says this isn't the games its something in the security settings on the computer. So I contacted Norton 360 because that's who my Antivirus is through, but they look on the whole system and even disabled Norotn360 for a moment and it isn't Norton 360! So I said that it maybe in the settings of the computer, but I have not any security enabled HP System. So try to figure out what to do? I just want to play my games again. I even uninstalled Wild Tangent itself and reinstalled. I tried to uninstall all and reinstall all the games again. Please can someone help?

  Hello

  Method 1:

  Make a first boot minimum https://support.microsoft.com/en-us/kb/929135

  Method 2: Try to update the graphics card drivers and check if it works.

  Follow the steps to update the graphics driver:

  a. press the Windows key + X , and then click Device Manager.

  b. search for graphics cards.

  c. right-click on the graphics card and click Update driver software.

  Method 3:

  Make it compatible with Windows

  https://support.Microsoft.com/en-us/help/15078/Windows-make-older-programs-compatible

• Epson sx438w does not recognize the new ink cartridge

  Epson sx438w does not recognize the new ink cartridge, when change original are

  Contact Epson.  This isn't a problem of Windows or Microsoft.  They should be able to help or offer troubleshooting instructions.

• I get an error, "the executable file that this service is configured to run does not implement the service" when I try to synchronize the time in Windows XP.

  After trying to fix the error of time synchronization by typing net start w32time that receipt of the message in the title.  In addition, type net stop w32time responded that the service was not working.

  Original title: the executable that this service is configured to run does not implement the service

  After checking the configuration in the registry and check or update if necessary from the link below:

  Then the time errors that I got from the command prompt window:
  Order--> net stop w32time & net start w32time
  Response--> The Windows Time service is not started.

  Order--> net start w32time
  Response--> system error 1083.
  The executable program that this service is configured to run in does not implement the service.

  --> Command w32tm/Resync /rediscover
  Response--> sending command to local computer resync...
  The following error occurred: the RPC server is unavailbale. (0x800706BA)

  Hi Mitchell_G,

  Thank you for keeping us posted.

  The steps of items offered in the previous post?

  We know if you need help. We will be happy to help you.

  Thank you.

• Hi, I have 4 of Lightroom, but it does not support the new objective of pd 10-30 for my Nikon 1. It is supported in LR5. Can I download the profile of this lens and install in LR4?

  Hi, I have 4 of Lightroom, but it does not support the new objective of pd 10-30 for my Nikon 1. It is supported in LR5. Can I download the profile of this lens and install in LR4?

  Wow! It worked! Thank you very much! You just saved me buying a new verion of Lightroom (which is of course why Adobe does not update these profiles automatically).

  Thank you very much!

• I have the iphone 6, since yesterday it does not open a lot of apps, they look just as they open you and then it comes out of the application itself, and I need information in my apps so I can just remove them and reinstall

  I have the iphone 6, since yesterday it does not open a lot of apps, they look just as they open you and then it comes out of the application itself, and I need information in my apps so I can just remove them and reinstall

  Have what troubleshooting you done?  Surely you have tried something before posting here, Yes?

  Hold power and home until is buttons restarts.

• Any time I try to access the web site GOOGLE, this message 404 not found (nginx)

  Any time I try to access the web site GOOGLE, this message appears.

  Any suggestions as to what is the cause and what is the fix.

  Thank you

  Hi LindaPhillion,

  1. Did you the latest changes on the computer?
  2. What web browser do you use?
  3. Are you having similar issue with any other search engine?

  You will usually receive this error when Internet Explorer is able to connect to the website, but the webpage cannot be found. This error is sometimes caused because the webpage is temporarily unavailable or that the Web page has been removed.

  Get help with the Web site (HTTP error) error messages.

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-website-error-messages-HTTP-errors

  Note: Above article also applies to Windows XP.

  Note: Try the step only if you are using the web browser Internet explorer below.

  Refer to the article below and try the steps mentioned, check if it helps.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/ro

• I have 12 items but camera raw does not work with New York nikon d810 does support elements 14 raw d810 nikon camera

  I have 12 items but camera raw does not work with New York nikon d810 does support elements 14 raw d810 nikon camera

  bavarian1 wrote:

  I'm sure that my computer is up to the task, but I don't always have the answer No 14 elements camera raw support the d810 nikon?

  John

  I told you in my first post "in short, PSE14 may", Yes, the PSE13 and 14 support Nikon D810.

• ccSvcHst.exe inhibits the CPU at 100% on XP Media Center 2002 (Service Pack 3). PC does not respond until the end of ccSvcHst.exe there domination of 30 to 90 minutes.

  ccSvcHst.exe consumes CPU: (XP Media Center 2002 w/Service Pack 3)

  • PC does not respond, until ccSvcHst.exe completes his domination of CPU from 30 to 90 minutes.
  • Completely consumes 100% CPU AMD Athlon 64 4000 + (4 GB RAM).
  • Has always been a problem with Microsoft Media Center o/s, which has worstened and occurs more frequently.
  • The PC makes it completely useless.
  • Unable to complete the process or decrease its priority.
  • If hardbooted, the ccSvcHst.exe process usually will continue during the restart.
  • Running Norton 360.
  • Please indicate if you need additional information?
  • Thank you in advance with the help of solution (s).  Your help is greatly appreciated!

  ccSvcHst.exe consumes CPU: (XP Media Center 2002 w/Service Pack 3)

  • PC does not respond, until ccSvcHst.exe completes his domination of CPU from 30 to 90 minutes.
  • Completely consumes 100% CPU AMD Athlon 64 4000 + (4 GB RAM).
  • Has always been a problem with Microsoft Media Center o/s, which has worstened and occurs more frequently.
  • The PC makes it completely useless.
  • Unable to complete the process or decrease its priority.
  • If hardbooted, the ccSvcHst.exe process usually will continue during the restart.
  • Running Norton 360.
  • Please indicate if you need additional information?
  • Thank you in advance with the help of solution (s).  Your help is greatly appreciated!

  The list file you most often is a process associated with Norton 360. However, malware is sometimes assumed the names of the legitimate files in order to deceive the end user. Norton is a Devourer of known system and as a result, I wouldn't be surprised to learn that he is a legitimate file in your case. However, I recommend you download, to update and scan with Malwarebytes and Superantispyware, just to be sure. If the scans do not detect the file and the problem persists I would contact Norton or remove Norton making sure to use the tool to uninstall do.

  Malwarebytes.org

  SUPERAntiSpyware.com | Remove malware | Remove spyware - AntiMalware, AntiSpyware, adware!

  Sometimes to decide what battles to fight the toughest battle of all... Visit my forum @ http://repairbotsonline.forumotion.com/forum.htm

• After you install a second WD 1 TB my book drive, Windows Explorer does not see the new drive.

  Original title: Signature Collision?

  I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.

  Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision

  Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).

  I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.

  Can anyone help?
  Thank you
  Comatose13

  Hello Comatose13,

  There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.

  http://support.Microsoft.com/kb/330140

  Bobby

• I worked on the Web site of our Church and all of a sudden my computer does not connect to the site. I get a message saying that the connection to the server was reset while the page is loading. Can anyone has any ideas on how I fix?

  I worked on the Web site of our Church and all of a sudden this week, my computer does not connect to the site. I get a message saying that the connection to the server was reset while the page is loading. Can anyone has any ideas on how I fix?

  The error message "the connection was reset" can be caused by a bug for the attack of the BEAST fix (browser exploit against SSL/TLS) that the server does not support.

  • [918127/questions/918127]
  • [918028/questions/918028]

• I downloaded Itunes 12.3.3 and now I tunes does not recognize my Ipad or Iphone. I went through all the procedures and just uninstall and reinstall. Please fix 12.3.3.Thanks.

  I downloaded Itunes 12.3.3 and now I tunes does not recognize my Ipad or Iphone. I went through all the procedures and just uninstall and reinstall. Please fix 12.3.3.Thanks.

  iTunes: fix iPhone or iPod not detected Windows 10

• When I try to start my computer, it does not load anything. The backlog, but the rest of it runs bad and slow. I can't open any programs that either, and my pointer always told it to load.

  Original title: Please HELP

  When I try to start my computer, it does not load anything. The backlog, but the rest of it runs bad and slow. I can't open any programs that either, and my pointer always told it to load. Safe mode works, but I just don't know what to do. Help, please

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Since it works fine in safe mode, I suggest you to try to perform the clean boot to safe mode and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 2:
  Also, try to run the safe mode System File Checker and check if it helps:
  http://support.Microsoft.com/kb/929833

  Method 3:

  Be sure to run a full scan with your antivirus software.

  http://www.Microsoft.com/security/default.aspx

  It will be useful.

• Unexpected error in the property page. The VSS service uses the system restore does not work. Error (0 x 810000202). __

  original title: "there was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information, see the journal of events (0 x 810000202). __

  "There was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information see log of events (0 x 810000202).

  Please try the troubleshooting below to check the status of the shadow copy Volume service

  1. click on start > all programs > Accessories > run

  Type the following text in the run window, and then click ok:

  Services.msc

  You will get the Services window.

  2. Please check service Volume shadow copy service is "started" and "automatic".

  If these services are not set to "Started" and "Automatic", please, do a right-click on the service and select "Properties".
  On the window properties, please change the startup type to automatic, and use the Start button to start the service.

  Click on apply, click ok.

  Close the Services window

  Restart the computer and check if the problem occurs again.

  If the problem persists, start your computer in safe mode and try to do a restore of the system again. Temporarily disable your anti-virus protection

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  I hope this helps
  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Western Digital WD10EARS internal hard drive Caviar Green 1 TB - my system does not recognize the new drive

  I recently bought a computer Dell 4700 to a friend with Windows XP installed. I've updated the memory to 2 GB and now seeks to install a WD10EARS 1 TB harddrive. The new works of fine memory is not the hard drive. My system does not recognize the new drive. I contacted WD for help and they told me to try diferent rider combinations that were Jumper 1-2 and 5-6, still does not work, I checked the hardware compatibility list and he said he would start uo without modification. This isn't. I would be very greatlyful for any suggestions, to HELP!

  I've had several people tried to help me solve my problem. They were all, I thought, more than I am computer savvy. As time progressed, solutions became more complex. After they all left without resolution I thought and it appeared to me that the simplest solution might be correct. One person had checked. I turned on the computer and when the Dell logo came I pushed the F12 key to open the Dell configuration screen. The drive on which the new drive has been installed has NOT been activated! Duh! I activated the he and the program Acronis recognized and everything went like clockwork after that. Phew! What relief! Thank you for your comments I am just glad that my problem it doesn't require resolution. Are Mod