My site connected to the server, but do not appear

Similar Questions

• When reading emails, said TB connected to the server, but is not download emails

  The following suddenly started happening. (Things are working very well for several months on the same account settings).

  When I try to retrieve the email from my IMAP e-mail server, there is a message at the bottom that says that Thunderbird is connected to the server, but nothing happens thereafter - no emails are downloaded.
  Thunderbird invites me even a password to connect to the IMAP server as it usually does.

  However, note that I * can * send emails without problem (via the configured SMTP server).
  As well, I have no problem reading the emails on the server even on other customers of emails with same account settings.

  The problem started after I upgraded to Thunderbird 38.2.0, an earlier version of a few months back).
  Thunderbird prompted me to do the upgrade, and it can have kicked so he was still connecting and authenticating to the IMAP server - which is just speculate offshore.

  Any ideas what I can do?

  Details of the platform: Thunderbird 38.2.0, Windows 7 x 64, entering via the SSL Protocol IMAP, SMTP outgoing via the SSL protocol

  Thanks in advance

  Glen

  Thunderbird 38 is indeed longer than previous versions... See my blog. There are a few things you can do. Ranging from Fix Security broken on the server to a temporary add-on which will establish market if the server hotfix is delayed.

  http://thunderbirdtweaks.blogspot.com.au/2015/07/logjam-and-Thunderbird.html

• At the opening of some Web pages I get a msg 'unable to connect to the server', but it works very well in startup

  The last few days during the use of the internet, some Web pages will not be not open. I get a msg of error saying 'unable to connect to the server', but it works very well with other sites such as Facebook and YouTube.  This happens when I use Safari, Firefox and Chrome.  Yet if I'm in Safe Boot mode it works fine.  I exaggerate the App installed VPN and when I am in normal mode and connect to the VPN exaggeration, all Web pages work correctly. I searched the net for days trying to find a solution but nothing I tried worked.  I'm not very computer savvy either so don't know much of what I do with this technical stuff.  I emptied the caches, but that did not work.  Following the advice of an answer to another question on this forum that was similar to mine, I went into the Terminal and performed a diagnostic test.  I don't understand all the information in this essay so hope someone here can decipher. The report is quite long, but this is the beginning of the pasted below.  Help, please!

  The system version: OS X 10.11.1 (B 15, 42)

  Kernel version: Darwin 15.0.0

  Boot Mode: Normal

  Model: MacBookPro11, 1

  FileVault: on

  The System Diagnostics

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  Diagnosis of the user

  2016-04-12 AssetCacheLocatorService crash

  Accident of GarageBand 2016-04-12

  Kernel messages

  Apr 12 15:34:15 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 15:34:15 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 15:34:18 NTFS-fs warning (device/dev/disk0s4, pid 165): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 15:35:41 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 520; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45019

  Apr 12 16:45:59, launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 16:45:59, launchd process [1] disable the CPU - the system-wide limit

  Apr 12 16:46:31 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 16:46:31 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 16:46:33 NTFS-fs warning (device/dev/disk0s4, pid 155): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 16:47:52 iCoreService process [94] taken causing excessive Awakenings. Awakenings (per second) rate: 557; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45052

  12 apr 17:20:51 0xe00002db questioned the file opening error

  -the last message repeated 1 time.

  Apr 12 19:39:26 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 19:39:26 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 19:39:28 NTFS-fs warning (device/dev/disk0s4, pid 158): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 19:40:49 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45066

  Apr 12 20:46:58 launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 20:46:58 launchd process [1] disable the CPU - the system-wide limit

  Apr 12 20:47:21 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 20:47:21 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 20:47:23 NTFS-fs warning (device/dev/disk0s4, pid 157): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 20:48:44 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45476

  Apr 12 21:54:58 opening error 0xe00002db questioned the file

  -the last message repeated 3 times.

  Apr 13 01:42:49 deal with com.apple.WebKit [12265] wire 546051 caught fire CPU! He used more than 50% of the CPU (actual recent use: 93%) more than 180 seconds. Screw using the processor to life 90,030145 seconds, (89.468979, System 0.561166 user) information book: balance: 90000757669 credit: debit 90000757669: limit 0: 90000000000 period (50%): 180000000000 time since last filling (ns): 96164617988

  Hi AussieEgypt,

  Thank you for using communities Support from Apple.

  If a problem does not occur when it is started in safe mode, then you have already determined that the problem was isolated to a few 3rd party software running on your Mac.  Take a look at the information below to start with the removal of some elements of start-up and connection and see if the problem persists:

  Test your login items

  1. Choose the Apple menu > System Preferences, and then click users and groups.

  2. Click on your account under the current user name, and then click connection points.

     Make a list of the login items, you will need to remember later.

  3. Select all the elements of connection, and then click the button Delete .

  4. Choose the Apple menu > restart.

  5. If this solves the problem, reopen the preferences users and groups, add the elements of connection one at a time and restart your Mac after the addition of each of them.

     If the problem persists, follow the steps above to remove only the last element of connection that you added.

  OS X El Capitan: If you think you have incompatible connection points

  See you soon.

• My lg800g phone shows connected to the computer but is not assigned a drive letter

  My lg800g phone shows connected to the computer but is not assigned a drive letter

  Hello

  You can manually assign the letter.

  Check out the link and check if that helps.

  Change, add, or remove a drive letter

  If you have any questions on Windows, feel free to let us know. We are happy to be of assistance.

• XI (11.0.09) drive sometimes starts the process but does not appear in applications or open on desktop

  On windows 7 64 bit. Sometimes reader XI (11.0.09) begins the process but does not appear in the applications. In this case however the application is started for example start menu, double-click on pdf, double-click AcroRd32.exe. He

  11.0.09 is put on hold for us - supported by 11.0.08 solves the problem

• When I connect to the start page of mozilla, I can't go to any other sites Web - get "unable to connect to the server", but I'm still able to access the internet through Internet Explorer on the same computer.

  Cannot move to the start page of Mozilla. Any site or search I run, I get a message that Mozilla can not establish a connection with the server.

  See this support article - difficulty of problems connecting to websites after Firefox update

• On a shared PC my side do not connect to the internet but side not affected spouse. I have run virus scan and none detected on its side but can't run on my side, because I can not connect help please.

  My husband and I share a PC. He has his desk top and I have mine, just that recently, I have not been able to connect to what anyone on my side of the PC, but its East side works well, it can connect to the internet, but I can't any idea what should I do? I ran virus scan and his side of own, cannot check the mine but cannot connect help please.

  Hello

  1. you remember to make changes to your computer, after which the issue started?
  2. do you have a cable or a wireless connection?

  I would recommend that you follow these steps.

  Step 1:

  Test the issue in safe mode with network and check if that helps.

  Step 2:

  Configure the connection to obtain an IP address automatically.
   
  a. click "Start", enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
  b. right-click on the network connection, and then click "Properties".
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. click Select 'Protocol Version 6 (TCP/IPv6) Internet' and then click 'properties '.
  d. check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  e. click 'OK '.
  f. click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
  g. check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  h. click on 'OK '.

  Step 3:

  Follow the steps in this article and check if that helps.

  Why can't I connect to the Internet?

  Steps are also applicable for Windows Vista.

• It says attempts to connect to the server and will not download installation

  It says trying to connect to the server and download any new installation

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Safari cannot connect to the server, but other browsers can?

  Hi all

  I read a lot of posts on this issue but do not seem to share the same success or symptoms.

  I'm unable to access a domain www.ninnim.co.uk

  I can access it fine on my iPhone and Chrome.

  I can't access mode without failure or any other profiles created.

  I have not a firewall is enabled, and it is the only area in which I can't access. Of course, when I talk about godaddy they simply access via IE and it works fine, which puts an end to their participation in supporting me.

  Someone has ideas what could cause this and how can I do to put it right?

  In hopeful preparation, I have this information that has helped others in the past;

  com.logmein.driver.LogMeInSoundDriver (4.1.55f95)

  com Parallels.Virtualsound (1.0.36

  com.techsmith.TACC (1.0.3)

  com Parallels.virtualhid (1.0.3

  com Parallels.kext.USBConnect (11.1.3

  com Parallels.kext.Hypervisor (11.1.3

  com.Parallels.kext.netbridge (11.1.3

  com Parallels.kext.vNIC (11.1.3

  com Parallels.mobile.kextloader.launchdaemon

  com.adobe.ARMDC.Communicator

  com.Adobe.adobeupdatedaemon

  com Parallels.mobile.Dispatcher.launchdaemon

  com OpenSSH.sshd

  Adobe_Genuine_Software_Integrity_Service

  com LogMeIn.raupdate

  com.Adobe.fpsaud

  com.adobe.ARMDC.SMJobBlessHelper

  com.adobe.AAM.Scheduler - 1.0

  com HP. DeviceMonitor

  com.adobe.Dreamweaver - 16.0.47072

  com Parallels.mobile.prl_deskctl_agent.launchagent

  of. FileZilla.244512

  com.Adobe.accmac.137312

  com Skype.Skype.128992

  com.getdropbox.dropbox.78432

  com.adobe.CCLibrary.180192

  com.adobe.acc.AdobeDesktopService.81952.A405B76A-A5E1-4E4C-9225-BD40BA6D4013

  com.adobe.CCXProcess.179872

  com.adobe.AdobeCreativeCloud

  com.google.Chrome.54752

  com Parallels.Desktop.Console.86432

  com.adobe.Photoshop.49312

  com.parallels.inputmethod.ParallelsIM.112992

  com Parallels.WinApp.fddca7501f3bd32d7fddef2fa12099ba.730f4d548e9a471190457bd1c0 31c453.89952

  com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37a2 3d420d

  com.adobe.AAM.Scheduler - 1.0

  com HP. DeviceMonitor

  com.adobe.Dreamweaver - 16.0.47072

  com Parallels.mobile.prl_deskctl_agent.launchagent

  of. FileZilla.244512

  com.Adobe.accmac.137312

  com Skype.Skype.128992

  com.getdropbox.dropbox.78432

  com.adobe.CCLibrary.180192

  Brands-iMac: ~ Mark$ ls - 1 {, /} library / {Compon Ad, Ex, Fram, in, the, Mail / Bu, P * P, Priv, what, Scripti, Ser, Sta} * 2 >/dev/null

  / Library/Components:

  / Library/Extensions:

  ACS6x.kext

  ATTOCelerityFC8.kext

  ATTOExpressSASHBA2.kext

  ATTOExpressSASRAID2.kext

  ArcMSR.kext

  CalDigitHDProDrv.kext

  HighPointIOP.kext

  HighPointRR.kext

  PromiseSTEX.kext

  SoftRAID.kext

  TACC.kext

  hp_Inkjet3_io_enabler.kext

  hp_io_enabler_compound.kext

  / Library/Frameworks:

  AEProfiling.framework

  AERegistration.framework

  Adobe AIR.framework

  AudioMixEngine.framework

  NyxAudioAnalysis.framework

  PluginManager.framework

  iTunesLibrary.framework

  / Library/Input methods:

  ParallelsIM.app

  / / Library/Internet Plug-Ins:

  AdobeAAMDetect.plugin

  AdobePDFViewer.plugin

  AdobePDFViewerNPAPI.plugin

  Default Browser.plugin

  Plug-Ins disabled

  Flash Player.plugin

  Quartz Composer.webplugin

  flashplayer. XPT

  / Library/LaunchAgents:

  com.adobe.AAM.Updater - 1.0.plist

  com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37a2 3d420d.plist

  com.adobe.AdobeCreativeCloud.plist

  com LogMeIn.logmeingui.plist

  com LogMeIn.logmeinguiagent.plist

  com LogMeIn.logmeinguiagentatlogin.plist

  com Parallels.mobile.prl_deskctl_agent.launchagent.plist

  / Library/LaunchDaemons:

  com.adobe.ARMDC.Communicator.plist

  com.adobe.ARMDC.SMJobBlessHelper.plist

  com.Adobe.adobeupdatedaemon.plist

  com.Adobe.agsservice.plist

  com.Adobe.fpsaud.plist

  com LogMeIn.logmeinserver.plist

  com LogMeIn.raupdate.plist

  com Parallels.mobile.Dispatcher.launchdaemon.plist

  com Parallels.mobile.kextloader.launchdaemon.plist

  / Library/PreferencePanes:

  Flash Player.prefPane

  / Library/PrivilegedHelperTools:

  com.adobe.ARMDC.Communicator

  com.adobe.ARMDC.SMJobBlessHelper

  / Library/QuickLook:

  iBooksAuthor.qlgenerator

  iWork.qlgenerator

  / Library/QuickTime:

  AppleIntermediateCodec.component

  AppleMPEG2Codec.component

  / Library/ScriptingAdditions:

  Adobe unit Types.osax

  / Library/StartupItems:

  Library/Address Book Plug-Ins:

  SkypeABCaller.bundle

  SkypeABChatter.bundle

  SkypeABDialer.bundle

  SkypeABSMS.bundle

  Methods of entry/library:

  .localized

  / Library/Internet Plug-Ins:

  Library/LanguageModeling:

  da - dynamic.lm

  -dynamic.lm

  en - dynamic.lm

  ES - dynamic.lm

  fi - dynamic.lm

  en - dynamic.lm

  TI - dynamic.lm

  NB - dynamic.lm

  NL - dynamic.lm

  PL - dynamic.lm

  PT - dynamic.lm

  SV - dynamic.lm

  TR - dynamic.lm

  I suggest you only begin by taking the measures recommended in this support article.

• iPhone connects to the wifi but does not connect to internet

  I have an iPhone running iOS 9.3.2 6s (last updated).

  The phone connects to the wifi network, but even if it's to show the signal strength is good, the phone does not charge any internet content (weather, FaceBook, email, etc.).  If I disconnect WiFi and use the data, it works very well.  We have no problem connecting to the computer or a smart TV network wifi and internet connection.

  This also happens with my daughter 5s iPhone and iPad for my son.

  Sometimes it will work fine on wifi, then a little while later I can't get anything to load. And it can be like right now when I'm at home alone is not as if there's a big load on our wifi.

  We have high-speed internet by cable (25 MB/s download speed) and a router Lynksys EA3500.  Encryption is set to WPA (not WEP).

  I tried to go into my phone settings and reset the network.  Always problems.

  It's really frustrating because you eventually switch to our mobile data and use it instead of our data ' wifi '.  And then to go on our data on our phone plan

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• HP Envy 4500: Printer connected to the router, but will not print wireless Macbook

  I want my wireless printer to work on my macbook, but I can't. I tried setting up on the HP utility to connect with the router as the mac and printer on but it does not work! It indicates that the download was successful, but the device was not reachable. I don't really know where to go from here and any help would be really appreciated. Thank you.

  Hey @miriamnimmo,

  Welcome to the Forums of HP, I would be happy to help you! I understand that you have the printer set up on your network, but the software says that the device is not accessible. Sometimes the IPv6 may interfere with the connection, and I suggest we disable that before anything else. On the fornt of the printer Panel, scroll down to and then select Wireless. In the wireless Menu, select Advanced settings, then IPv6 and.

  Now we are going to let the router and unplug the power cable (NOTE: do not reset the router), then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Please let me know if this solves the problem by marking your post as solved (click on Accept as Solution button below). If the problem persists, let me know, I'll watch for your reply.

  See you soon!

• New Samsung UHTV connects to the router, but does not access Internet

  My new UHTV Samsung detects the private network (router) OK, but the TV does not connect to the Internet.

  All other devices (PC, radio) I can access the Internet through the router without problems.

  Before I read too many books, can someone point me in the right direction?

  ElaineM,

  I tried everything in the book - without success; so finally, I reset and reconfigured the router.

  He now works as usual, and I hope it will stay like that.

  Thanks for you patience and support.

  Björn

• OfficeJet 4500 said connected via the wireless, but is not

  Printer worked fine for 10 months and all of a sudden, was not connected to the HP Touchsmart 610.  No changes. When I run the setup of the network of the façade, he says success but when I press OK the date and time displayed are default (Jan 00...). It seems it is not connected and it does not appear on the network.  I restarted holding # and 6 to reset the printer and no luck.

  When I connect via a USB cable and run the installation CD, I get the error of the 427 firewall port.

  This article should help to maintain the wireless connection:
  http://support.HP.com/us-en/document/c02817031

  Give the steps described a try and tell us if it helps.

  Good luck!

• WRT120N Wireless laptop connected to the router, but does not connect to internet

  I have a HughesNet HN9000 modem connected to a Linksys WRT120N router. I have two desktop computers, both running XP Home, connected to the router via ethernet .5e cables and work perfectly. I have a laptop running Vista Home Premium, I am trying to connect to the internet via the internal wireless card. According to me, the laptop connects with the wireless router, as it connects but says 'Local only' - it won't let me access the router IP/control panel. I tried to reset the router / modem as well as the parameters of the laptop, but I keep getting the same question.

  If I connect the laptop and the port #3 on the router via a cable .5e I can browse the Internet. But I need to be able to use the laptop throughout the House so electrician is not an option.

  I found this article which directed me to this download , which worked. If your help is most needed. Thanks anyway.

• WRT54G will connect to the network but will not connect to internet

  Guys, I installed an older Linksys CM100 cable modem and when I did I lost the connection to the internet using the WRT54G Router. I can connect fine net when I go to right fromt the modem cable to the pc. I can use my home network very well. I did a firmware upgrade, does not. I'm losing my mind. It worked fine before the new cable modem. Does make sense to anyone? BTW, I can't connect to the internet via wired or wireless connections and ping www.google.com gives 100% packet loss. Ditto for a ping to 192.168.1.100 (cable modem) when the router is connected.

  Dear God please help me

  -Jacob

  Thus, because no one here was able to offer all the help, I called tech support and was very surprised. I was able to get a tech immediately and without going through the 1 million on the phone buttons. The service is in India, but I could communicate well enough with him, even though I usually have people of understanding of handful who speak English as a second language. The issue that I had was that the default IP of the modem cable (192.168.1.100) and ip address of the router (192.168.1.1) were too similar. Apparently, the fact that the 3rd number 1 for both series was the cause of the problem. We changed the IP address of the router to 192.168.5.1, power cycling it and unfortunately it worked.