My Smartphone/iPad can connect to the wifi network, but my laptop do not show the network.

Similar Questions

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

• Can I connect my HP4625 all in one directly on my ipad/iphone without using a wifi network. ?

  Can I connect my HP4625 all in one directly on my ipad/iphone without using a wifi network. ?

  Hi xxtopgunxx,

  Welcome to the HP Support forums.  I understand you want to print from your devices Apple to your printer Deskjet Ink Advantage 4625 without the printer is connected to a wireless network.

  It is possible that we can get the printer to disseminate its own network. Please note that the network will broadcast the printer will not have access to the internet.  Please follow the steps below:

  • On the front panel of the printer, please press the wireless button
  • By using the buttons on the right, highlight and select wireless settings
  • Highlight and select Restore Defaults
  • Select Yes. A message appears indicating that the default values of the network have been restored
  • Open your application settings on your Apple device, please
  • Please click on wifi and choose the network that starts with "HP-SETUP.  This should connect to your Apple device to the printer
  • Now you should be able to print using the 'Action' icon.  If there is not a print option when you press the action icon following all guidelines for Apple AirPrint

  If you go to print and your Apple device does not see the network, you will need to follow the procedure again. It should be at least 60 minutes before the HP - Setup network ceased broadcasting.

• Apple Watch can connect to the WiFi of my airport when it is set to 2.4 and 5 GHz?

  Apple Watch can connect to my WiFi?  When the iphone is out of reach of Apple Watch of bluetooth, Apple Watch goes WiFi that is connected to the iphone. The WiFi of Apple Watch is 2.4 GHz. My Airport is 2.4 GHz and 5 GHz. in case the Apple Watch connect?

  Help here > Bluetooth and Wi-Fi on Apple Watch - Apple Support

• Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

  Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

  Two possibilities:

  (1) your airport WiFi might have a network name that is not in line with best practices, wireless

  A good wireless network name is...

  ... In short no more than 20 characters

  Simple... no special characters like an apostrophe, dollar sign, asterisk, etc.

  Compact, without spaces in the name

  For example, a wireless network network name as... red .dfedoryk Apple wireless network... .is not what you want. Something like... .dfedorykwireless. .. masse are much more likely to connect to non-Apple devices.

  Same guidelines your password

  (2) Apple gives the same name to network 2.4 GHz and 5 GHz network that produces double router band.  Some non-Apple devices are confused by the present, you may need to use the option to assign a different name for the network of 5 GHz on the router from Apple. Then, 'point' your device to the network name specific to which you want to connect.

• problem with express mini pci wireless lan card. I can't connect to internet via wifi but I can connect to the internet via cable.

  Hello! I have a problem with my card express 11 b/g/n wireless lan mini pci because I can't connect to internet via wifi but I can connect to the internet via cable. whenever I try to connect it repeat to myself that there is a problem with your wireless network card. I tried troubleshooting, uninstall and reinstall the program, but always the same result. I'm updating too but still the same thing. I use a windows 7 Professional on my Lenovo 412. can someone help me? Thank you!

  Hello

  Method 1: I suggest you to follow the instructions of the link to solve the problem of network card:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 2: Troubleshoot wired and wireless in Windows network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference: http://forums.lenovo.com/t5/R-and-L-Series-ThinkPad-Laptops/L412-Wireless-Automatically-Disables/td-p/264447

  You can also post your question in the forum of Lenovo to get help:

  http://forums.Lenovo.com/

• I am not able to connect to the main wifi network but can connect to the network of comments.

  Hello

  This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.

  The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...

  Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.

  Wait a minute

  Turn on the modem first and leave a few minutes, he managed by itself

  Turn on the next device that is connected to a modem and leaves turn a good minute

  Keep turn on devices one by one at a time, one minute apart, until the entire network is back

  Recheck the network and report on your results

• How can I see who is connected to my wifi network?

  How can I see who is connected to my wifi network?

  What is the brand and model of your wireless router that produces your Wi - Fi network?

• Problem with the ipad to connect to the internet and load

  I have an update ready to install.  Last night I went to do - could not connect to the internet - I couldn't move the cursor that runs on the internet in the settings.

  The update had already downloaded, but the installation was not admissible.  I saw that the battery was low and trendy - it would not accept a load a load. (12 hours later - still at 40%)

  I can access other programs ie player or loner and they work, but still no internet.

  Can anyone help?

  Hi Edmond,.

  Thank you for your participation in the communities of Support from Apple.

  Looks like your iPad connects to internet after downloading (but not install) update of the iOS. If you have not already, I suggest to restart (or force reboot) your iPad -restart your iPad, iPhone or iPod touch.

  If your iPad always connect to the internet normally once it restarts, you can use the troubleshooting procedure in If your iPad, iPhone or iPod touch connects to a Wi-Fi network.

  Sincerely.

• I can connect to the local network, but not to the internet

  Why in an internet connection, I can connect to the Local network, but not to the Internet.
  I have valid IP address and configuration is good.

  I recommend you read some threads here in the forum about similar issues.
  If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
  Using the WiFi network, you must check if the common WLan parameters are favourable;
  Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.

  Good bye

• I can connect to the WLan, but cannot access the internet on Tecra A8

  There is no problem when I use the LAN port.
  When I use the WiFi (wifi adapter Tecra A8), I can connect to the network, but the status is local, I can't access the internet.

  I've updated my access point with the latest firmware (D-link DWL-2000AP +).
  I do not get a new IP address.

  My OS is Vista.

  Hello

  You have set up the WLan router with the right data from your ISP (internet service provider)?

  Further, I would recommend to disable all security on the router option and try to access the internet.
  I mean, you must disable the encryption (WEP, WPA), Mac filtering address, etc.
  In addition, check if, in settings TCP/IP, the option as "obtain an IP address automatically' has been set.

  Have you tried the WiFi connection using the customer like Intel ProSet utility or Atheros configuration tool?
  These tools can be used instead of own WLan connection option of Windows.

  Reset you the WLan router? This!

  Pleas check al these proposals

• My printer is connected to my WiFi router, but I can't print

  My printer is connected to my WiFi router, but I can't print.  When I ask to print something, it goes through the options but nothing prints or is pending.  Any ideas?  Low ink, would result even if I printed a test page and newwork connedtion.

  Hello

  1 are there any changes or updates made on the computer?

  2 Windows operating system is installed on the computer?

  3. do you get an error message? If Yes, what is the full and exact error message?

  4. What is the serial number and model of the printer?

  I also suggest send you the link and try to run repair and check.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  I suggest to see the link and try to run the troubleshooter.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if it helps.

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Please help - I don't understand this: because iPad can contain only the content of five Apple ID.

  I give my son my iPad.

  I try to download Apps on it and I get the message: some of the files in the iTunes Store iTunes library were not copied to the iPad because iPad can contain only the content of five Apple ID.

  As far as I know there are only 2 Apple ID involved - my own and the one we did for him as a minor.

  If someone has had this problem and can you help me to overcome.

  It is typical that this situation happens the day before her birthday - I wanted to give him tomorrow all loaded with his own stuff. It five of its apps accepted last month when I first came with the idea and now...

  Anyone?

  This means what it means: iTunes Store items are tagged with the Apple that was used to buy ID. Apparently in this case, for some reason, over 5 ID are involved. Which could include accounts that are no longer used.

  In general, it is best to follow these steps before giving your iPad to someone else: what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• Can connect to the office/Hotmail but not Live of Skype. .

  Hello

  I can connect my hotmail, and I can see my Skype contacts, but it says my password is wrong if I try to connect to live Skype.

  Using the same account and passowrd, I can connect to Skype from office, but I don't see my contacts.

  Any ideas? Thank you

  http://heartbeat.Skype.com/2015/11/issues_with_skype_login_and_co.html