my startup configuration is corrupted

Similar Questions

• Equium A100-147: cannot install Vista because of startup configuration problem

  Equium A100-147 (Windows MCE) bought compatible Vista and bought my promised copy of Vista... used Toshiba step by step DVD ROM upgrade and also updated the Bios.

  Tried to load Vista Home Premium and after going through all the steps, it came with this message...
  «Could not update the computer startup configuration - installation cannot go ahead «...»»

  How should I proceed and what is useful to load Vista.
  Thanks in advance for any help.
  Considers that Howard.

  Hello

  How have you tried to install vista on the laptop?
  Have you tried to switch the MCE to Vista or were you running the new clean install of Vista?

  In my opinion, you must perform a clean installation. Don t updated the existing MCE of Vista.
  In such cases, you can join different installation problems

  If you are an owner of an original MS windows XP CD try to run the console of your windows XP CD recovery.
  Demarrer start from the CD at startup, and then press R to access the recovery console after loading the driver.

  In the recovery console, typefixbootand then restart your laptop.
  Then insert your Vista installation and restart.

  This should solve your problem.

• Startup-Configuration of backup to Disk0:

  Hello together,

  I want to back up my configuration of start-CAT6500 to disk0: flashcard and that you want to save the config file with the actual timestamp in the config-file-name on disk0:

  In what follows the syntax:

  Event Manager applet backup_conf_to_CF_card

  syslog event model ' % PFINIT-SW1_SP-5-CONFIG_SYNC: Sync'ing to the standby router startup configuration. "

  command action 1.0 cli 'enable '.

  Action 2.0 cli command "conf t".

  Action 3.0 cli 'file quiet guest. "

  Action 4.0 cli command "end".

  action 5.0 cli command "" copy startup-config disk0:backup_conf?".

  action 6.0, "conf t" cli command

  Action 7.0 cli command "end".

  action 8.0 cli don't command "no quiet guest file".

  subject of the server "10.158.128.120" to "XXXX" to "XXXX" action 9.0 mail ' testlab saved on disk0 boot configuration:

  !

  Is there a date variable native, I can use? What would be the proper syntax?

  Thank you very much

  BR Patrick

  It is a little easier in TCL to control the file name. I use the following to configs copied to a server TFTP (environment variable) in a specific date format (I use other scripts to call this script on a regular and the basis of change in config):

  : cisco::eem:event_register_none maxrun 60

  If {!} [info exists BackupTFTPServer]} {}
  the value "policy cannot be performed: variable BackupTFTPServer is not defined.
  error $result $errorInfo
  }

  the timestamp value [clock format [clock second] - format {% Y.%m.%d.%H%M%S} - gmt {false}]
  Set routername [host name for information]
  Set the location tftp: / / $BackupTFTPServer / $routername. $timestamp.conf

  import namespace: cisco::eem: *.
  import namespace: cisco::lib: *.

  If {[result catch {cli_open}]
  error $result $errorInfo
  } else {}
  Table game cli1 $result
  }

  If {[result catch {cli_exec $cli1 (fd) 'enable'}]
  error $result $errorInfo
  }

  If {[catch {cli_exec $cli1 (fd) ' configure terminal '} result]}
  error $result $errorInfo
  }

  If {[result catch {cli_exec $cli1 (fd) "invites quiet file"}]
  error $result $errorInfo
  }

  If {[result catch {cli_exec $cli1 (fd) 'end'}]
  error $result $errorInfo
  }

  If {[result catch {cli_exec $cli1 (fd) 'copy running-config $location'}]
  error $result $errorInfo
  }

  If {[catch {cli_exec $cli1 (fd) ' configure terminal '} result]}
  error $result $errorInfo
  }

  If {[result catch {cli_exec $cli1 (fd) "no prompt quiet file"}]
  error $result $errorInfo
  }

  If {[result catch {cli_exec $cli1 (fd) 'end'}]
  error $result $errorInfo
  }

  If {[result catch {cli_close $cli1 (fd) $cli1 (tty_id)}]
  error $result $errorInfo
  }

• Win 7 does not start, the Startup Repair says corrupt amdide64.sys

  I uninstalled my ATI Catalyst Control Center, which forced a restart.  The reboot takes me to the windows startup repair which fails to solve the problem.  The log shows that theamdide64.sys is corrupted.  The options don't help me.  For example, I have no recovery points on this computer, then that option does not work.

  There was a post on the forums who suggested using the win7 install disk and choosing the repair option, but who also wants a recovery point and will not work.

  What else can I try?

  Hello

  You probably won't be able to run the repair facility, since you can't boot into Windows at all.

  Since it's disk about the best way to back up your data, would be to put the hard drive
  in another computer as a 2nd drive (best method) or "possibly" in a USB external box (less
  likely to work in this case). Or the other may allow you to copy the data to a removable such as
  CD, DVD and other USB units. Of course a real store of the computer or the manufacturer of the system can help
  with data recovery. There are professional data recovery companies even if these services are
  generally expensive.

  There are bootable discs, such as those who use linux, which will start and you could save
  the data.

  Hiren Boot CD
  http://www.hirensbootcd.org/

  Rescue Kit Trinity
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  System Rescue CD
  http://www.SysRescCd.org/Main_Page

  Knoppix
  http://www.Knoppix.NET/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• F2, F12, startup, configuration... Help!

  When I turn on my computer (usually by opening the lid and pressing the power button to wake the portable computer), I get this:

  WARNING: The battery cannot be identified. The system will not be able to charge this battery.

  Press a key to continue.

  
  

  I don't know what to do and were simply hit any key to continue. Battery recharge when plugged in AC. So I have no idea what that means all or what to do. F2 or F12? Help, please.

  Thank you!

  Hello enj64,

  Your battery may need to be replaced. Have you tried to remove and reinstall the battery? How old is this laptop? Maybe you should contact the manufacturer of your laptop to get help because there may be a recall on this farm. Let us know if this helps you. Make it a great day!

  "In the end, the love you take, is equal to the Love You Make"

• corrupt boot configuration

  HP Elitebook 8440p i7 64-bit

  Operating system Windows 7 2 bits

  problem after trying to upgrade to windows 7 64 bit

  message "Boot Configuration is corrupted.

  "error code 0 = 490"

  tried to repair:

  1 restart did not work

  2 ran Bootrec.exe /FixMbr and /FixBoot

  Do not fix a problem

  When I boot from the hard drive it runs the Startup Repair

  Tried to boot with windows 7 32 bit, 64 bit get stuck on the "development of files of the window.

  also tried the application recovery disk

  Conducted tests - failure of the battery.

  New laptop - windows 7 32 bit worked after the initial installation but had to change to 64

  bit version, why, but a portable 64-bit to run on 32-bit operating systems.

  Any suggestions to repair the boot configuration.

  Thank you

  Try the "bootrec /RebuildBcd.

  http://support.Microsoft.com/kb/927392

• Error message: "the address book failed to load. Outlook Express is incorrectly configured, please re-install. "at the start of XP and the machine.

  After uninstalling my XPSp3 o.e., I started getting the following error message: "the address book failed to load. Outlook Express is incorrectly configured, please re-install. "at the start of XP and the machine.

  Uninstalling included 7 entries registry to remove all the * files dbx and files *.wab addressbook, except himself. After uninstalling and receipt of the error message above, I tried to use my CD of XP OS to re - install O.E. as a component of Microsoft without success.

  I upgraded to Outlook 2007 and imported to the address book of O.E. successfully before uninstalling.

  Please advise me how to get rid of the error message always appearing at startup.

  Thank you

  You can't really uninstall and reinstall OE without having to reinstall XP as OE is a part of it. I hope your foray into the registry does not require a reinstall of XP.
   
  You now have the DBX files? WAB files?
   
  If Outlook has been on your machine before this event, see the reference by PA Bear in this thread
  http://social.answers.Microsoft.com/forums/en-us/xpnetwork/thread/a8c8cf17-d792-481e-BCCA-13b03852a995
   
  If Outlook has not been installed, see these.
  
  Courtesy of Michael Santovec:
  http://pages.prodigy.NET/michael_santovec/techhelp.htm
   
  All of you who have the same cause.  Something is screwed up with your address book.
   
  It could be several specific problems, which include:
  -corrupted WAB file
  -damaged or incompatible DLL files for the addressbook
  -have OE set to use the Outlook98 / 2000 + contacts instead of the WAB
  folder and there is something wrong at the end of Outlook
   
  For more details, take a look at:
   
  Error message: the Message could not be sent. Some invalid recipients
  (Outlook Express: there was an error opening this message)
  (The address book failed to load. OE is configured incorrectly)
  (Corrupted or incompatible WAB32. DLL file)
  http://support.Microsoft.com/?kbid=239135
  OLEXP: Error Message: failed to load address book
  (There was an error opening this message)
  http://support.Microsoft.com/?kbid=269777
  http://support.Microsoft.com/?kbid=310873
  OLEXP: MSIMN has caused an IPF in Module Wab32.dll
  http://support.Microsoft.com/?kbid=247706
  Error message: failed to load address book, Outlook Express is...
  http://support.Microsoft.com/?kbid=191946
  Error message: could not open address book, a component is missing
  http://support.Microsoft.com/?kbid=192321
   
  The address book Windows (WAB)
  http://www.insideoe.com/files/WAB.htm
   
  To share Contacts between Outlook and Outlook Express
  http://www.slipstick.com/contacts/oeshare.htm 

• corrupted Windows 8 bcd file - does not start

  My error code is 0 x 0000034 Startup Configuration file is corrupted. Windows 8 will not start, I am able to boot from the Windows CD, but none of the recovery system commands will not work on a corrupt BCD file. The BCDEDIT commands will not work, and the bootrec command will not work. Does anyone know how to rebuild or recreate the file BCD on Windows 8? In addition, a method on Windows 7 runs on windows 8. I have 8 64 windows.

  Table of contents for the double post:

  Windows 8 - missing directory BOOT & BCD file

  I work with a Dell Inspiron ONE 2320 the upgrade of windows 7 64-bit for windows 8 64-bit. After the upgrade, I lost the STARTUP directory and the BCD file I can't rebuild the BCD and impossible to create the STARTUP directory. How can I fix?

  Hi Albert

  You can try to reset as Winston has suggested that he will solve the problem. Before attempting to reset the PC, you can try refreshing the computer and check.

  When you refresh PC applications provided with your PC or you installed from Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. Windows puts a list of applications on your desktop after you refresh your PC.

  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

  I hope this information helps,

• What is xwvorgutssd in my startup config? Anyone know?

  I searched and have no idea what it is. Trying to find out if necc to start

  Thanks for any info

  The short answer is that you must remove this entry from your configuration to start using Autoruns (see below).

  You seem to be a step beyond the majority of posters who ask something like: 'why do I get an error message that xwvorgutssd.dll can not be found when I start Windows?' because you have already discovered the entry in your startup configuration (probably using msconfig).

  Here is the generic answer:

  Looking for errors like this by doing a search on Google for the name of the file.  Usually, they turn up without success.

  When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

  First of all, download, install, update and run a scan complete with each of these free analytical tools:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

  Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

• Change 'Start Up' of the elements in the System Configuration utility

  I tried to remove some the startup items in order to speed up my computer. When I run msconfig and I select "Start" and then check the items to delete, after I selected "Apply" I get a message that basically said... "Access error was returned. You may need to log on as an Adminitrator s changes. As far as I know, I am an administrator as ever, I added all the extra accounts and I always connect under the default account titled original HP administrator.

  In addition, what are the elements are indeed necessary on this menu? Some of them I know but there is a number, I have no idea.

  MSConfig has been designed to be a troubleshooting tool, not a "Start Configurator".  Use MSConfig to determine the location of the command who tries to start the program, and then remove it.  To stop the selective startup notifications, either return your settings to the way they were, or permanently remove unwanted programs from your startup configuration.

  In most cases, with 'good manners' applications, it is usually as simple as opening the unwanted program and deselect the "Show icon in the system tray" option or "launch at Windows startup.

  In addition, look in C:\Documents and Settings\All Users\Menu Menu\Programs\Start Up and C:\Documents and Settings\nom_utilisateur\Menu Menu\Programs\Start files and in the system registry, mainly in the HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run and HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Run key.

  How to troubleshoot using the Msconfig utility in Windows XP
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 310560

• Outlook Express: "address book failed to load. OE is configured incorrectly, please reinstall.

  Windows XP Home Edition. Suddenly cannot open my email. I searched the *.wab file and the 'read only' box is not checked. It is said that it has been changed a few days ago. I remember deleting an address duplicate at this time. What would I do? How should I do?

  Thank you

  If Office is/has been installed on this computer, see the reference by PA Bear in this thread
  http://social.answers.Microsoft.com/forums/en-us/xpnetwork/thread/a8c8cf17-d792-481e-BCCA-13b03852a995

  If the Agency was never installed, check out these links. Don't worry, the references to older versions of OE. They still apply.

  Courtesy of Michael Santovec:
  http://pages.prodigy.NET/michael_santovec/techhelp.htm

  All of you who have the same cause.  Something is screwed up with your address book.

  It could be several specific problems, which include:
  -corrupted WAB file
  -damaged or incompatible DLL files for the addressbook
  -have OE set to use the Outlook98 / 2000 + contacts instead of the WAB
  folder and there is something wrong at the end of Outlook

  For more details, take a look at:

  Error message: the Message could not be sent. Some invalid recipients
  (Outlook Express: there was an error opening this message)
  (The address book failed to load. OE is configured incorrectly)
  (Corrupted or incompatible WAB32. DLL file)
  http://support.Microsoft.com/?kbid=239135
  OLEXP: Error Message: failed to load address book
  (There was an error opening this message)
  http://support.Microsoft.com/?kbid=269777
  http://support.Microsoft.com/?kbid=310873
  OLEXP: MSIMN has caused an IPF in Module Wab32.dll
  http://support.Microsoft.com/?kbid=247706
  Error message: failed to load address book, Outlook Express is...
  http://support.Microsoft.com/?kbid=191946
  Error message: could not open address book, a component is missing
  http://support.Microsoft.com/?kbid=192321

  The address book Windows (WAB)
  http://www.insideoe.com/files/WAB.htm

  To share Contacts between Outlook and Outlook Express
  http://www.slipstick.com/contacts/oeshare.htm

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• "The address book failed to load. Only express Outlook is configured incorrectly".

  "The address book failed to load. Outlook Express is configured incorrectly, please reinstall"
  "You was an error opening this message.  An error has occurred. »
  There is a solution of Microsoft (239135 Article ID), but shows only the troubleshooting steps for Windows 95 and 98.  I am running Windows XP, Internet Explorer 8, Outlook Express 6.
  These messages appear when I try to create a new Message.
  Any help would be appreciated.
  Cliff

  Fixes for OE5X often apply to the OE6 and for this reason are not being updated. Do not apply to you.

  Courtesy of Michael Santovec:
  http://pages.prodigy.NET/michael_santovec/techhelp.htm

  All of you who have the same cause.  Something is screwed up with your address book.

  It could be several specific problems, which include:
  -corrupted WAB file
  -damaged or incompatible DLL files for the addressbook
  -have OE set to use the Outlook98 / 2000 + contacts instead of the WAB
  folder and there is something wrong at the end of Outlook

  For more details, take a look at:

  Error message: the Message could not be sent. Some invalid recipients
  (Outlook Express: there was an error opening this message)
  (The address book failed to load. OE is configured incorrectly)
  (Corrupted or incompatible WAB32. DLL file)
  http://support.Microsoft.com/?kbid=239135
  OLEXP: Error Message: failed to load address book
  (There was an error opening this message)
  http://support.Microsoft.com/?kbid=269777
  http://support.Microsoft.com/?kbid=310873
  OLEXP: MSIMN has caused an IPF in Module Wab32.dll
  http://support.Microsoft.com/?kbid=247706
  Error message: failed to load address book, Outlook Express is...
  http://support.Microsoft.com/?kbid=191946
  Error message: could not open address book, a component is missing
  http://support.Microsoft.com/?kbid=192321

  The address book Windows (WAB)
  http://www.insideoe.com/files/WAB.htm

  To share Contacts between Outlook and Outlook Express
  http://www.slipstick.com/contacts/oeshare.htm

  Bruce Hagen MS - MVP [Mail]

• How to remove McAfee security scran more my boot of the System Configuration.

  Hi, my laptop is a Windows vista 32-bit, I have a problem to remove McAfee Security scran more my boot of the System Configuration. In fact, I had used the removal tool to remove the antivirus McAfee sofeware eralier. But when I opened my startup Configuration recently, I noticed that the McAfee security plu scran is still there, I have turn off, but couldn't delete it. Help, please. Thank you.

  Gary

  Hello

  1. are you able to uninstall successful McAfee software?
  2. is there an error message or error code while you uninstall McAfee software?

  Try the following and see if it helps.

  Method 1:

  How to uninstall McAfee Security Scan Plus? : http://service.mcafee.com/FAQDocument.aspx?lc=1033&id=TS100783

  See also: http://promos.mcafee.com/LegacyLp/en-us/affiliates/adobe/landingpages/np681.asp

  Method 2:

  Uninstall if you have any program name McAfee Security Scan Plus on your computer.
  Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

  See also:

  Solve problems with programs that cannot be installed or uninstalled:http://support.microsoft.com/mats/Program_Install_and_Uninstall

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 3:

  The System Configuration utility displays the items that start with your computer. These items are usually in one of two areas. The registry or during startup.

  If you decide to prevent specific items from start until you can uncheck the in the System Configuration utility. Although this method is very good, it is ultimately preferable to delete them from the source. To access the common locations in the registry of these elements take a look in the following areas:

  Note : open the registry editor by clicking the Start button, type regedit into the search box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunOnce

  Hkey_current_user\\software\\microsoft\\windows\\currentversion\\run

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Runonce

  If you have disabled items in the System Configuration utility and want to remove the registry also they lies in one of the following locations:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SharedTools\MSConfig\startupfolder

  HKEY_LOCAL_MACHINE startupreg

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

• Restart Powerconnect 6248 without disturbing the Configuration

  I apologize in advance for the entry-level position and if that's the answer elsewhere, please point me in the right direction:

  I inherited load on a network LAG / VLAN with a central 2-battery Dell switch Powerconnect 6248 functioning as a main switch and routing of traffic between the VLANs that are shared it resources.

  I want to restart this switch without losing any configuration, because I'm just to enter this network, I don't want to disrupt or rebuild the configuration.

  I can get Telnet or SSH access to the switch but now use the GUI. When I go to reboot I choose to restart the two batteries and am met with the message:

  "The unit will restart with the startup configuration, not the running configuration. Do you want to continue? »

  I had a contractor separate network restart the switch before and I don't know if it simply ignored the message and proceeded. I would like to be able to restart this switch without losing any configuration.

  My question is, I'm ok to move forward through this error message? Or do I need to configure backup to restart? What is the best way to proceed with a simple reboot of two chimneys, while maintaining the current configuration.

  Here is the procedure, I suggest you take.

  -If the running configuration is operational and you want to keep on the switch, and then save it in the startup configuration.

  -before to restart, save the configuration.

  -Keep the battery restart.

  You can then use this backup config as a reference in case something happens to the configuration of the switch. It's a good idea to take the habit of saving after all change config, before the updates of the firmware, reboot, etc.

  Here is an article that will guide you through the commands to perform these actions.

  http://Dell.to/1NPR5aY

  Hope you find it useful.

• Error at startup of the system

  Hello

  I used the product (details as below):

  Product name: HP Pavilion a1210in (bought in 2005)

  Operating system: Windows XP

  My computer worked perfectly well, all of a sudden when I booted the system and facing this error message:

  "Reboot and select proper boot device .

  "or insert a bootable media in the selected boot device and press a key.

  I rebooted the system and checked in the startup configuration menu, and he showed not the hard drive. A Serial ATA drive is installed in my PC. But only 3 m-LITE-ON COMBO SOHC - 4836 K (which is the CD/DVD player combo) appears in the list of boot devices.

  I removed and reconnected the cables, (hard disk SATA connection), in the processor, but it does not help as well.

  What are the possible options now (Do I need to get a new hard drive, if yes, then which ones do I need?)

  Help, please.

  wb2001: ' find a replacement hard drive is difficult because this system uses a SATA Ultra DMA-150.» This is commonly called Sata150. Most discs hard Sata300 have riders to make the drive used in Sata150. (Rider is not included). »

  PiyushKapoor: "I actually don't know much about Sata 150/300, then you mean say that there is no alternative option? So what are the possible solutions now?

  You must locate a Sata300 drive. She should have jumpers on the backend that can be set to Sata150. Examples:

  http://www.hardwaresecrets.com/article/everything-you-need-to-know-about-serial-ATA/27/3

  http://www.wdc.com/en/library/Eide/2579-001037.PDF

  http://knowledge.Seagate.com/articles/en_US/FAQ/195251en