My startup noise and shut down sound is missing

Similar Questions

• Startup and shut down problems on Sony VGN-AR51SU laptop with Vista Ultimate

  I have a Sony VGN-AR51SU laptop which has Vista Ultimate preloaded when it was purchased. The windows product key is noted on the underside of the computer.

  The computer is configured to close, either by closing the lid or will the icon start then shut down. I don't remember which option I used to shut down the computer.
  However when I press the power button the computer immediately emits three short beeps. The hard disk icon flashes as if it is starting, but the LCD display remains black and never even a blue screen comes. Devices powered by the computer the light upward.
  Eventuallu the hard drive icon will stop blinking.
  When I put the cover towards the bottom of the computer behaves as if it ends and all devices close but the power of the computer remains on, regardless whether I am with the main power or battery.
  Obviously I can not use the starting/closing track that I have a black screen.
  I tried all the options to remove lead AC and battery close and all devices, then re-boot just on AC power or battery or any combination of these options, etc etc etc and nothing makes a little difference.
  I keep my system and software updated and this problem was one of sudden nature IE. OK one day then the problem the next time I turned on the computer.
  Make three short beeps on start uo and the fact that the screen remains black gives a clue as to the problem?

  Hi Taked,

  This seems to be a hardware problem. You must contact Sony support for assistance on the issue.

  Contact Sony technical support

  http://eSupport.Sony.com/us/Perl/select-System.pl?Director=contact&SR=NAV:support:Electronics:contact_support:ESUP

• Fan and shut down

  Hello guys,.

  When I play video games, the fan is very loud, and when I leave the game, the Mac is running more slowly than usual for about the first five minutes. If I want to stop immediately after leaving the game, I let my Mac cool before shutting down, or can I simply arrested him while the fan still work very hard?

  The reason for my question is that I am curious to know if it is "unhealthy" for the Mac to go from 100 to 0 just like that instead of let go from 100 to 0 and then stopping.

  Thank you in advance!

  Kind regards

  Mads

  There is the thermal shutdown circuits in the MBP that prevents the MBP to destroy oneself against excessive heat.  It makes no significant difference when you turn it off.

  Ciao.

• My sleep, put into hibernation and shut down the Start button went from Vista Home Premium.

  When I go to the right of my Start button and try to Hibernate, sleep, or shut down my computer, all the buttons are gone. Now, I don't see that "change of user, logoff or lock. Now, in order to stop, I have to go to the Start button and to the right, the trunk, which brings back me to a screen to logon with a red box and an arrow at the bottom right of my screen. It of only then when it allows me to shutdown my computer. Can anyone help.

  Hello

  How to remove or display the Start Menu in Vista shutdown Options
  http://www.Vistax64.com/tutorials/105003-shutdown-options-start-menu.html

  Button missing in the Vista Start menu
  http://www.Visser.com.au/blog/missing-shutdown-button-in-Vista-Start-menu/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 8 on Bootcamp. Kernel_security_check_failure regular on restarts and Shut Downs.

  MacBook Pro 13 retina

  8 GB RAM

  Bootcamp 5.0.5033

  Windows Fresh 8 upgrade from fresh Windows 7

  Hello

  I've been using Boot Camp for several months, running Windows 7 on my Mac. I need extend partition, so I decided to uninstall the Windows 7 partition (using Boot Camp on a Mac), then reinstall Windows 7 on a freshly prepared partition. Who had finished I immediately upgraded to Windows 8.

  I installed the Boot Camp of support software, and as far as I can tell all my drivers are up to date.

  However, every time I restart or shut down the computer, I get a BSOD with Kernel_security_check_failure. I tried to study it using WinDbg, but all this can point to what is NTKRNLMP.exe which shows that it is caused by something else, and it is not clear what.

  I tried to go through this process twice, so I'm on my second fresh install in Windows 8 now.

  There is no other problems at all on Mac or Windows, it is not never failed except when it restarts.

  I ran a memtest with no problems found.

  I have about this problem over the past months, I have been using Windows 7

  The only time I saw it crash not was when it was connected to an external monitor which leads me to believe it's a problem with the display driver. I tried all the drivers from the Boot Camp, Windows update software and update the Intel utility display and none of them solve the problem.

  Any help or this point troubleshooting tips would be MUCH appreciated and I would be interested to hear if someone has the same problems.

  Thank you!

  Chris

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• YouTube / GIFs causes sound stretch and shuts down the computer.

  Hello.

  Everything worked him up until the spring of 2014 when my internet lost residence. Finally moved to another residence in summer 2014 and has noticed that when using my laptop once again that Youtube videos and animated GIFs stretched and stuttered sound and froze my computer.

  Flash player, Java, Windows Media player and IE were affected. I tried to update all but settled is constantly interrupted by error messages. It all traces back to IE but can not enter say it or re-install / update. I rather not uninstall all of the programs mentioned above for fear of these programs is not able to install afterwards. Restorations and restores system were made but only up to a point (less than a month ago) and not to the most remote, with few results.

  Also somehow had internet limited during spring 2014 from time to time but Kaspersky failed to update normally and himself knocked out. Had to use his troubleshooting and Best Buy help re - install, but it was a successful installation. Perhaps something got through that affects those above apps but Kaspersky found nothing wrong.

  A question, someone of you recommended a total OS re - install at this point? Operating system is Windows 7.

  Hello

  Most often this is caused by requiring to do two things (or both):

  1. make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

  2 disable hardware acceleration in your browser:

  Firefox-

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  IE - http://www.SevenForums.com/tutorials/149063-Internet-Explorer-GPU-hardware-acceleration-turn-off.html

  Chrome - http://www.sevenforums.com/tutorials/271264-chrome-gpu-hardware-acceleration-turn-off.html

  Kind regards

  Patrick

• Satellite Pro P500 - standby and Shut Down crashing

  I have a Satellite P500. Bought new with Windows 7. It is new and has had a bad hard drive replaced.

  Since then, I've reconfigured everything and everything seems to be working - except when the sleep and the closure are activated, they do not work. Stop going just to close to the bottom of the screen and stays there for centuries until I force a stop down by holding down the power button. She won't be in standby mode and Hibernate properly either - drafts of the screen and hard drive starts to do something, but system remains active and fan works.

  I found another forum thread where something similar happening in the model of the A300, and someone suggested to turn off the wake-up on LAN and keyboard settings. Both of these Jefferson already out on it so go there.

  Help is greatly appreciated.

  Hello

  IF your laptop hangs on farm screen and doesn't go into hibernation/standby layout, I think that it s not bound as a result of the functions in the BIOS. This is more important if your computer starts up without any reason.

  Anyway, in your case I would of BIOS update.

  If this doesn t work you should try to reinstall Windows. This could also be a software problem.

• Windows 10 sleep and shut down problem bootcamp

  Hi can you please help me

  I am running windows 10 pro 64-bit os, generation 10586.71 on my I mac end 2012 27 inches

  When I stopped my connected USB device which has a led indicator remains steady. I think it means that it is not turned off properly. To stop it completely, I have to hold the power button after.

  Also when I put my mac to sleep, when I move the mouse or press any key on the keyboard, the screen comes on. Do I have to do is press the power button. Also when I do this, I hear the fans turn on, but I'm not sure if this is normal or not.

  However, when I click on restart, which normally occurs

  There is also another concern

  When I turn on my mac, when it is activated at startup of windows by default, until I see the windows logo, I see a black screen and at the top left a flashing dashboard white, similar to when your terminal on windows. It then goes on the windows logo.

  After that, he goes on the screen to login as usual, but even here, I have to wait for my mouse to connect, if I have no idea if this is a common problem

  so once I have connected until I see the Office for a PIN second I see an orange please wait screen, I don't think color matters as it used to be blue when my windows theme was blue until I customized it to orange

  even when I see the windows logo after the black screen with the dashboard, here the scroll wheel has lagged.

  and when I turn on my computer it sometimes takes quite a long time to go in the logon menu. and a few days ago I received an error message saying that I had to restart.

  I had windows 10 on boot camp on Monday, January 18, 2016, so about two weeks ago.

  I have

  a processor i5 - 3470 s 2.90 ghz

  graphics nvidia gtx 660 m

  24 GB of RAM

  Help, please

  Thank you

  Please see still in power after his stop USB ports .

• Plug n play guard cutting and shut down my computer

  every 15 to 20 minutes exactly, it seems that my computer says Plug a Plau stopped unexpectedly continues with something on the host process stops and then restarts my computer?

  I know what you mean - it happened to me and I couldn't understand it. However, I went on a tour of service and found a few tools that could diagnose the failures of the system and thaey helped me to fix it. Well I hope its fixed - so I didn't have a stop for 6 days now. Then!, you must get a copy of "whocrashed" and run it after you plant then. It will tell you what caused the crash, sort of. If you see xusb21. It will be a driver error. It will give you a basic idea of the type of driver, but not the driver that is causing the problem. Then, go and install the latest version of Directx to be deemed websource. get a copy of windows 7 upgrade advisor and run the software after restarting your system. It checks for all is not software certificate and endorse the rest. You can browse the list and check the drivers and programs to ensure compatibility with the win7 OS you are running. Finally go to Control Panel tools system/administration/panel = and select Selective Startup box, then restart. Do this again and reset the settings to normal. That's all. IF you software runnignvirus of protection that interferes with some process, you must lower the protection or turn off completely so that the diagnostics is not interrupted.

• Satellite 1135-S155 beeps + freezes and shuts down... Help, please!

  I have a Satellite 1135-S155 beep constantly, nonstop beep, and beep about 30 seconds it stops.

  Help, please.

  Thank you

  FS

  Hi Fausto

  It is not easy to say what he can be, but in my opinion, it's a hardware problem. Contact the Service partner and leave check your laptop.

• Computer sleep mode now starts up and shut downs, launching his closing...

  Computer had run this morning and I was away for a few hours.  When I got home, I found that my HP S5780t was closed and then heading back to the top, then stop, start...  Power supply LED shows green, disconnected from hard drive and DVD drive and same condition exists. BIOS screen does not appear.   All three fans work properly.  Monitor displays the initial screen of HP but machine stops before that anything it can happed.  F10 tried but machine still off.  Machine will continue in this fashion until I have press and hold the button for a few seconds.  Looks at some other messages regarding this issue, but did not find anything that solved my problem.

  Thank you

  Hello again Bofus,

  Thanks for the information on your question. The problem you describe seems to be a physical problem, and I think it would be better if you contact HP Support for service options. They are the only ones who could give you one estimate other than a local computer repair service.
  
  I want to thank you for display on the HP Forums. Have a great day!

• Satellite L350D-213 repeated overheating and shuts down

  Hello

  Recently had problems with my Toshiba laptop Satellite L350D-213 of the he repeated overheating and if off, any suggestions as to prevent overheating would be greatly appreciated

  Hello

  There is a lot of advice about the overheating problem.
  First the laptop stops automatically to avoid that the pieces of equipment from damage, the higher temperature may affect parts and this is the reason why the laptop stops.

  Why the temperature is too high?
  Well, maybe the cooling modules does not t run with the best performance because of the dust and debris inside the modules?
  It is mainly the reason why fans do not twist and cannot cool the laptop.

  I recommend to check this and remove dust and debris from cooling vents using a jet of compressed air.

  I do from time to time, and it helps to clean the fans

• My laptop will not update happens in step 3 0% and shuts down and turns back and repeats!

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi BigtymerC,

  This phenomenon occurs with trying to install a particular update?

  Try the steps listed in the link below: update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7: http://support.microsoft.com/kb/949358

   

  Let us know if this helped.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Acer Aspire X 3810 overheats and shuts down. What can I do to fix this?

  Overheating it turns off how to turn it back on again and no other problems with the pc itself.

  overheating only when I play some games online but like World of Warcraft. Can anyone please help and tell me what I need to do?

  Problem fixed for now, I moved just the PC if the fan is sitting next to my window and it has not overheated since.

• both bluetooth and usb not recognized, couldn't able to start and shut down properly. The message of the usb not recognized

  popping up the message usb not recognized. It occurs when the network was slow and tried to disconnect internet directly unplug and plug the usb between mobile phone and pc. then it does not go away even system restore has been made. In addition, the bluetooth does not work. When I stopped PC properly but it will restart. at the same time when I start it up, but it does not occur. I closed again and then start again and works. However, it appears the message usb not recognized frequently.

  To start with, try running the Fixit USB, here http://support.microsoft.com/gp/hardware_device_problems